Clinical and immunological outcomes of SARS-CoV-2-infected vaccine responders, vaccine non-responders, and unvaccinated patients evaluated for neutralizing monoclonal antibody treatment at a single German tertiary care center: a retrospective cohort study with prospective follow-up.

PURPOSE: This study assessed the clinical and immunological outcomes of SARS-CoV-2-infected patients with risk factors for severe disease depending on their immunological status. METHODS: In this retrospective study with single follow-up visit, clinical outcome and humoral immunity was monitored in SARS-CoV-2 infected patients at risk. The results were compared based on the patients' initial immunological status: unvaccinated (UV), patients who did not develop neutralizing antibodies after vaccination (vaccine non-responders, VNR), and patients who expressed neutralizing antibodies after vaccination (vaccine responders, VR). Patients who lacked neutralizing antibodies (VNR and UV) were treated with nMABs. RESULTS: In total, 113 patients at risk of severe COVID-19 consented to participate in the study. VR and UV were not admitted to the hospital. During the observation period, UVs had the highest rate of SARS-CoV-2 re-infections. Three of 41 VNRs (7.3%) were hospitalized due to severe COVID-19, with two of them having undergone iatrogenic B-cell depletion. The humoral immune response after infection was significantly lower in the VNR group than in the VR group in terms of anti-N, anti-receptor-binding domain (RBD), anti-S antibody titers, and anti-S antibody avidity. In a sub-analysis of VNR, B cell-deficient non-responders had significantly lower levels of anti-N antibodies and anti-S avidity after infection than other VNRs. CONCLUSION: VNR, particularly B-cell-depleted VNR, remained at risk of hospitalization due to COVID-19. In the VR group, however, no clinical complications or severe disease were observed, despite not receiving nMAbs. Tailoring the administration of nMABs according to patient vaccination and immunological status may be advisable.

The reliability and stability of visual working memory capacity.

Because of the central role of working memory capacity in cognition, many studies have used short measures of working memory capacity to examine its relationship to other domains. Here, we measured the reliability and stability of visual working memory capacity, measured using a single-probe change detection task. In Experiment 1, the participants (N = 135) completed a large number of trials of a change detection task (540 in total, 180 each of set sizes 4, 6, and 8). With large numbers of both trials and participants, reliability estimates were high (α > .9). We then used an iterative down-sampling procedure to create a look-up table for expected reliability in experiments with small sample sizes. In Experiment 2, the participants (N = 79) completed 31 sessions of single-probe change detection. The first 30 sessions took place over 30 consecutive days, and the last session took place 30 days later. This unprecedented number of sessions allowed us to examine the effects of practice on stability and internal reliability. Even after much practice, individual differences were stable over time (average between-session r = .76).

Orientational phase transition in monolayers of multipolar straight rigid rods: The case of 2-thiophene molecule adsorption on the Au(111) surface.

Monte Carlo simulations and finite-size scaling theory have been carried out to study the critical behavior and universality for the isotropic-nematic (IN) phase transition in a system of straight rigid pentamers adsorbed on a triangular lattice with polarized nonhomogeneous intermolecular interactions. The model was inspired by the deposition of 2-thiophene molecules over the Au(111) surface, which was previously characterized by experimental techniques and density functional theory. A nematic phase, observed experimentally by the formation of a self-assembled monolayer of parallel molecules, is separated from the isotropic state by a continuous transition occurring at a finite density. The precise determination of the critical exponents indicates that the transition belongs to the three-state Potts universality class. The finite-size scaling analysis includes the study of mutability and diversity. These two quantities are derived from information theory and they have not previously been considered as part of the conventional treatment of critical phenomena for the determination of critical exponents. The results obtained here contribute to the understanding of formation processes of self-assembled monolayers, phase transitions, and critical phenomena from novel compression algorithms for studying mutual information in sequences of data.

Entropy-driven phases at high coverage adsorption of straight rigid rods on three-dimensional cubic lattices.

Combining Monte Carlo simulations and thermodynamic integration method, we study the configurational entropy per site of straight rigid rods of length k (k-mers) adsorbed on three-dimensional (3D) simple cubic lattices. The process is monitored by following the dependence of the lattice coverage θ on the chemical potential µ (adsorption isotherm). Then, we perform the integration of µ(θ) over θ to calculate the configurational entropy per site of the adsorbed phase s(k,θ) as a function of the coverage. Based on the behavior of the function s(k,θ), different phase diagrams are obtained according to the k values: k≤4, disordered phase; k=5,6, disordered and layered-disordered phases; and k≥7, disordered, nematic and layered-disordered phases. In the limit of θ→1 (full coverage), the configurational entropy per site is determined for values of k ranging between 2 and 8. For k≥6, MC data coincide (within the statistical uncertainty) with recent analytical predictions [D. Dhar and R. Rajesh, Phys. Rev. E 103, 042130 (2021)2470-004510.1103/PhysRevE.103.042130] for very large rods. This finding represents the first numerical validation of the expression obtained by Dhar and Rajesh for d-dimensional lattices with d>2. In addition, for k≥5, the values of s(k,θ→1) for simple cubic lattices are coincident with those values reported in [P. M. Pasinetti et al., Phys. Rev. E 104, 054136 (2021)2470-004510.1103/PhysRevE.104.054136] for two-dimensional (2D) square lattices. This is consistent with the picture that at high densities and k≥5, the layered-disordered phase is formed on the lattice. Under these conditions, the system breaks to 2D layers, and the adsorbed phase becomes essentially 2D. The 2D behavior of the fully covered lattice reinforces the conjecture that the large-k behavior of entropy per site is superuniversal, and holds on d-dimensional hypercubical lattices for all d≥2.

Challenges of nanotechnology in cosmetic permeation with caffeine.

The evolution of beauty market and personal care is constant in Brazil as well in the rest of the world. Technological advances have brought up nanotechnology to the cosmetological field, employing active principles at atoms enveloped by vesicles, in order to take the active principle precisely to the target tissue to optimize the results achieved because of the considerable ease to cross skin barriers. Manufacturing of nanotechnology cosmetics is confronted with low absorption capacity. One of the many active principle found in cosmetic industry is caffeine, a pseudoalkaloid from the xanthine group used as a stimulant with the mechanism of the lipolytic action. This active is widely used in ​​a esthetics and cosmetics field in treatments involving dysfunctions such as localized fat and fibroedema geloid. To work out perfectly, the principle active need to interact and create a set of factors that includes lipolysis intensification. The caffeine encapsulation in gel-based nanocosmetics has the purpose of taking this active up to the adipocyte, the target cell, for mentioned dysfunctions treatment. Thus, we aim to present a review of how has been, the use of caffeine in the production of cosmetics.

Entropy-driven phases at high coverage adsorption of straight rigid rods on two-dimensional square lattices.

Polymers are frequently deposited on different surfaces, which has attracted the attention of scientists from different viewpoints. In the present approach polymers are represented by rigid rods of length k (k-mers), and the substrate takes the form of an L×L square lattice whose lattice constant matches exactly the interspacing between consecutive elements of the k-mer chain. We briefly review the classical description of the nematic transition presented by this system for k≥7 observing that the high-coverage (θ) transition deserves a more careful analysis from the entropy point of view. We present a possible viewpoint for this analysis that justifies the phase transitions. Moreover, we perform Monte Carlo (MC) simulations in the grand canonical ensemble, supplemented by thermodynamic integration, to first calculate the configurational entropy of the adsorbed phase as a function of the coverage, and then to explore the different phases (and orientational transitions) that appear on the surface with increasing the density of adsorbed k-mers. In the limit of θ→1 (full coverage) the configurational entropy is obtained for values of k ranging between 2 and 10. MC data are discussed in comparison with recent analytical results [D. Dhar and R. Rajesh, Phys. Rev. E 103, 042130 (2021)2470-004510.1103/PhysRevE.103.042130]. The comparative study allows us to establish the applicability range of the theoretical predictions. Finally, the structure of the high-coverage phase is characterized in terms of the statistics of k×l domains (domains of l parallel k-mers adsorbed on the surface). A distribution of finite values of l (l≪L) is found with a predominance of k×1 (single k-mers) and k×k domains. The distribution is the same in each lattice direction, confirming that at high density the adsorbed phase goes to a state with mixed orientations and no orientational preference. An order parameter measuring the number of k×k domains in the adsorbed layer is introduced.

Quality of cosmetics with active caffeine in cream and gel galenic bases prepared by compounding pharmacies.

As there is a great scarcity of studies on the importance of good compounding practices in the preparation of cosmetics, this study aimed to evaluate the quality control of cosmetics with active ingredient caffeine for the treatment of cellulite prepared by magistrals pharmacies. Microbiological analyzes, pH determination, color measurement, quantification of the percentage of the active ingredient caffeine and viscosity in creams and gels with 5% of the active ingredient caffeine were performed. In the microbiological analysis, the presence of molds and yeasts was verified above the permitted level according to the Brazilian pharmacopoeia. The pH decreased over time, contributing to the formulations becoming more acidic. In the color parameters, it was found that pharmacy F4 showed a brownish color, both for the gel and for the cream. The percentage of caffeine was within specifications in all formulations and the viscosity remained unchanged during the shelf life of the samples. It is important that the compounding pharmacies demand more effectively the commitment of the team, as well as the analysis of the raw material according to the microbiological control regulations to translate into the quality of the products prepared by the pharmacies and favor the consumer in the effective objective that the product you want to achieve.

Alternative characterization of the nematic transition in deposition of rods on two-dimensional lattices.

We revisit the problem of excluded volume deposition of rigid rods of length k unit cells over square lattices. Two new features are introduced: (a) two new short-distance complementary order parameters, called Π and Σ, are defined, calculated, and discussed to deal with the phases present as coverage increases; (b) the interpretation is now done beginning at the high-coverage ordered phase which allows us to interpret the low-coverage nematic phase as an ergodicity breakdown present only when k≥7. In addition the data analysis invokes both mutability (dynamical information theory method) and Shannon entropy (static distribution analysis) to further characterize the phases of the system. Moreover, mutability and Shannon entropy are compared, and we report the advantages and disadvantages they present for their use in this problem.

Irreversible multilayer adsorption of semirigid k-mers deposited on one-dimensional lattices.

Irreversible multilayer adsorption of semirigid k-mers on one-dimensional lattices of size L is studied by numerical simulations complemented by exhaustive enumeration of configurations for small lattices. The deposition process is modeled by using a random sequential adsorption algorithm, generalized to the case of multilayer adsorption. The paper concentrates on measuring the jamming coverage for different values of k-mer size and number of layers n. The bilayer problem (n≤2) is exhaustively analyzed, and the resulting tendencies are validated by the exact enumeration techniques. Then, the study is extended to an increasing number of layers, which is one of the noteworthy parts of this work. The obtained results allow the following: (i) to characterize the structure of the adsorbed phase for the multilayer problem. As n increases, the (1+1)-dimensional adsorbed phase tends to be a "partial wall" consisting of "towers" (or columns) of width k, separated by valleys of empty sites. The length of these valleys diminishes with increasing k; (ii) to establish that this is an in-registry adsorption process, where each incoming k-mer is likely to be adsorbed exactly onto an already adsorbed one. With respect to percolation, our calculations show that the percolation probability vanishes as L increases, being zero in the limit L→∞. Finally, the value of the jamming critical exponent ν_{j} is reported here for multilayer adsorption: ν_{j} remains close to 2 regardless of the considered values of k and n. This finding is discussed in terms of the lattice dimensionality.

GaAs Clusters in the Quantum Size Regime: Growth on High Surface Area Silica by Molecular Beam Epitaxy.

Molecular beam epitaxy has been used to grow microcrystalline clusters of gallium arsenide (GaAs) in the size range from 2.5 to 60 nanometers on high-purity, amorphous silica supports. High-resolution transmission electron microscopy reveals that clusters as small as 3.5 nanometers have good crystalline order with a lattice constant equal to that of bulk GaAs. Study of the microcrystallite surfaces by x-ray photoelectron spectroscopy shows that they are covered with a shell (1.0 to 1.5 nanometers thick) of native oxides of gallium and arsenic (Ga(2)O(3) and As(2)O(3)), whose presence could explain the low luminescence efficiency of the clusters. Optical absorption spectra of the supported GaAs are consistent with the blue-shifted band edge expected for semiconductor microcrystallites in the quantum size regime.

Jamming and percolation for deposition of k

Percolation and jamming of k×k square tiles (k^{2}-mers) deposited on square lattices have been studied by numerical simulations complemented with finite-size scaling theory and exact enumeration of configurations for small systems. The k^{2}-mers were irreversibly deposited into square lattices of sizes L×L with L/k ranging between 128 and 448 (64 and 224) for jamming (percolation) calculations. Jamming coverage θ_{j,k} was determined for a wide range of k values (2≤k≤100 with many intermediate k values to allow a fine scaling analysis). θ_{j,k} exhibits a decreasing behavior with increasing k, being θ_{j,k=∞}=0.5623(3) the limit value for large k^{2}-mer sizes. In addition, a finite-size scaling analysis of the jamming transition was carried out, and the corresponding spatial correlation length critical exponent ν_{j} was measured, being ν_{j}≈1. On the other hand, the obtained results for the percolation threshold θ_{c,k} showed that θ_{c,k} is an increasing function of k in the range 1≤k≤3. For k≥4, all jammed configurations are nonpercolating states and, consequently, the percolation phase transition disappears. An explanation for this phenomenon is offered in terms of the rapid increase with k of the number of surrounding occupied sites needed to reach percolation, which gets larger than the sufficient number of occupied sites to define jamming. In the case of k=2 and 3, the percolation thresholds are θ_{c,k=2}(∞)=0.60355(8) and θ_{c,k=3}=0.63110(9). Our results significantly improve the previously reported values of θ_{c,k=2}^{Naka}=0.601(7) and θ_{c,k=3}^{Naka}=0.621(6) [Nakamura, Phys. Rev. A 36, 2384 (1987)0556-279110.1103/PhysRevA.36.2384]. In parallel, a comparison with previous results for jamming on these systems is also done. Finally, a complete analysis of critical exponents and universality has been done, showing that the percolation phase transition involved in the system has the same universality class as the ordinary random percolation, regardless of the size k considered.

Wildfire smoke impacts activity and energetics of wild Bornean orangutans.

Indonesia's peatlands experience frequent and intense wildfires, producing hazardous smoke with consequences for human health, yet there is a lack of research into adverse effects on wildlife. We evaluated the effects of smoke on the activity and energy balance of Bornean orangutans (Pongo pygmaeus wurmbii) in a peat swamp forest at the Tuanan Research Station, Central Kalimantan. We collected behavioural data and urine samples from four adult flanged males before, during, and after wildfires between March 2015 and January 2016. During fires, particulate matter (PM10) concentrations were hazardous. Orangutans increased rest time during and after the smoke period, and decreased travel time and distance and increased fat catabolism post-smoke. The increase in post-smoke ketones was not related to changes in caloric intake and was likely due to an increase in energy expenditure, possibly related to immune response. Results show that wildfire smoke negatively affects orangutan condition, and sustained research is needed to assess the magnitude of the threat to the long-term viability of this Critically Endangered species.

Altered nucleotide sugar metabolism in Streptococcus thermophilus interferes with nitrogen metabolism.

Exopolysaccharide (EPS)-producing Streptococcus thermophilus strains have attracted interest recently, since the EPSs act as natural viscosifiers and texture enhancers of fermented foods. We have previously reported that the low level of EPS production by S. thermophilus LY03 could be improved by altering the activities of enzymes in the central carbon metabolism involved in the nucleotide sugar metabolism. In this study, we observed a reduced growth in milk for the strains with increased UDP-glucose pyrophosphorylase (GalU) activity together with either enhanced phosphoglucomutase activity, and/or enhanced activity of the Leloir enzymes. Rapid growth of these mutants in milk could be restored by the addition of four specific amino acids, i.e. Glu, His, Met, and Val. This amino acid requirement was confirmed in a defined medium. Furthermore, the 31P NMR spectra showed higher levels of the GalU reactants pyrophosphate (PPi) and UDP-glucose in the engineered strain, TMB 6013, compared to the parent strain, LY03. These products plus Glu and the GalU reactant UTP are known to be involved in the nitrogen regulatory system in many bacteria. Thus, these results suggest that the reaction catalyzed by GalU is connected to the nitrogen demand of these engineered strains.

Phase transitions in a system of long rods on two-dimensional lattices by means of information theory.

The orientational phase transitions that occur in the deposition of longitudinal polymers of length k (in terms of lattice units) are characterized by information theory techniques. We calculate the absolute value of an order parameter δ, which weights the relative orientations of the deposited rods, which varies between 0.0 (random orientation) and 1.0 (fully oriented in either of the two equivalent directions in an L×L square lattice). A Monte Carlo (MC) algorithm is implemented to induce a dynamics allowing for accommodation of the rods for any given density or coverage θ (ratio of the occupied sites over all the sites in the lattice). The files storing δ(t) (with time t measured in MC steps) are then treated by data recognizer wlzip based on data compressor techniques yielding the information content measured by a parameter η(θ). This allows us to recognize two maxima separated by a well-defined minimum for η(θ) provided k≥7. The first maximum is associated with an isotropic-nematic (I-N) phase transition occurring at intermediate density, while the second maximum is associated with some kind of nematic-isotropic transition at high coverage. In the cases of k<7, the curves for η(θ) are almost constant, presenting a very broad maximum which can hardly be associated with a phase transition. The study varies L and k, allowing for a basic scaling of the found critical densities towards the thermodynamic limit. These calculations confirm the tendency obtained by different methods in the case of the intermediate-density I-N phase transition, while this tendency is established here in the case of the high-density phase transition.

Jamming for nematic deposition in the presence of impurities.

The deposition of one-dimensional objects (such as polymers) on a one-dimensional lattice with the presence of impurities is studied in order to find saturation conditions in what is known as jamming. Over a critical concentration of k-mers (polymers of length k), no further depositions are possible. Five different nematic (directional) depositions are considered: baseline, irreversible, configurational, loose-packing, and close-packing. Correspondingly, five jamming functions are found, and their dependencies on the length of the lattice, L, the concentration of impurities, p=M/L (where M is the number of one-dimensional impurities), and the length of the k-mer (k) are established. In parallel, numeric simulations are performed to compare with the theoretical results. The emphasis is on trimers (k=3) and p in the range [0.01,0.15], however other related cases are also considered and reported.

Quality of cosmetics with active caffeine in cream and gel galenic bases prepared by compounding pharmacies / Qualidade de cosméticos com cafeína ativa em bases galênicas em creme e gel preparadas por farmácias de manipulação

As there is a great scarcity of studies on the importance of good compounding practices in the preparation of cosmetics, this study aimed to evaluate the quality control of cosmetics with active ingredient caffeine for the treatment of cellulite prepared by magistrals pharmacies. Microbiological analyzes, pH determination, color measurement, quantification of the percentage of the active ingredient caffeine and viscosity in creams and gels with 5% of the active ingredient caffeine were performed. In the microbiological analysis, the presence of molds and yeasts was verified above the permitted level according to the Brazilian pharmacopoeia. The pH decreased over time, contributing to the formulations becoming more acidic. In the color parameters, it was found that pharmacy F4 showed a brownish color, both for the gel and for the cream. The percentage of caffeine was within specifications in all formulations and the viscosity remained unchanged during the shelf life of the samples. It is important that the compounding pharmacies demand more effectively the commitment of the team, as well as the analysis of the raw material according to the microbiological control regulations to translate into the quality of the products prepared by the pharmacies and favor the consumer in the effective objective that the product you want to achieve.

Como há uma grande escassez de estudos sobre a importância de boas práticas de manipulação na elaboração de cosméticos, o presente estudo teve como objetivo avaliar o controle de qualidade de cosméticos com princípio ativo cafeína para o tratamento de celulite, elaborados por farmácias de manipulação de Campo Mourão. Foram realizadas análises microbiológicas, determinação do pH, mensuração da coloração, quantificação da porcentagem do princípio ativo cafeína e viscosidade em cremes e geís com 5% do princípio ativo cafeína. Nas análises microbiológicas foi verificada a presença de bolores e leveduras acima do pemitido segundo a farmacopéia brasileira. O pH diminuiu ao longo do tempo, contribuindo para que as formulações ficassem mais ácidas. Nos parâmetros de cor averiguou-se que a farmácia F4 apresentou uma coloração amarronzada, tanto para o gel quanto para o creme. A porcentagem de cafeína estava dentro das especificações em todas as formulações e a viscosidade se manteve inalterada durante o prazo de validade das amostras. Com o propósito de um melhor preparo magistral é importante que as farmácias de manipulação exijam de forma mais eficaz o comprometimento da equipe, bem como a análise da matéria-prima segundo as regulamentações de controle microbiológico. Além disso, a implementação de normas mais rígidas e o melhor controle da matéria-prima e das formulações finais fazem com que a qualidade dos produtos manipulados pelas farmácias magistrais seja aumentada significativamente, favorecendo o consumidor na efetiva finalidade a que o produto objetiva atingir.

Challenges of nanotechnology in cosmetic permeation with caffeine / Desafios da nanotecnologia na permeação cosmética com cafeína

The evolution of beauty market and personal care is constant in Brazil as well in the rest of the world. Technological advances have brought up nanotechnology to the cosmetological field, employing active principles at atoms enveloped by vesicles, in order to take the active principle precisely to the target tissue to optimize the results achieved because of the considerable ease to cross skin barriers. Manufacturing of nanotechnology cosmetics is confronted with low absorption capacity. One of the many active principle found in cosmetic industry is caffeine, a pseudoalkaloid from the xanthine group used as a stimulant with the mechanism of the lipolytic action. This active is widely used in a esthetics and cosmetics field in treatments involving dysfunctions such as localized fat and fibroedema geloid. To work out perfectly, the principle active need to interact and create a set of factors that includes lipolysis intensification. The caffeine encapsulation in gel-based nanocosmetics has the purpose of taking this active up to the adipocyte, the target cell, for mentioned dysfunctions treatment. Thus, we aim to present a review of how has been, the use of caffeine in the production of cosmetics.

A evolução do mercado de beleza e cuidados pessoais é constante no Brasil e no resto do mundo. Os avanços tecnológicos trouxeram a nanotecnologia para o campo cosmetológico, empregando princípios ativos em átomos envolvidos por vesículas, a fim de levar o princípio ativo precisamente ao tecido alvo para otimizar os resultados alcançados devido à considerável facilidade de atravessar barreiras cutâneas. A fabricação de cosméticos nanotecnológicos é confrontada com baixa capacidade de absorção. Um dos muitos princípios ativos encontrados na indústria cosmética é a cafeína, um pseudoalocalóide do grupo xantina usado como estimulante no mecanismo da ação lipolítica. Este ativo é amplamente utilizado no campo da estética e dos cosméticos em tratamentos que envolvem disfunções, como gordura localizada e fibroedema gelóide. Para funcionar perfeitamente, o princípio ativo precisa interagir e criar um conjunto de fatores que inclui a intensificação da lipólise. O encapsulamento de cafeína em nanocosméticos à base de gel tem o objetivo de levar esse ativo até o adipócito, a célula alvo, para o tratamento de disfunções mencionado. Assim, objetivamos apresentar uma revisão de como tem sido o uso de cafeína na produção de cosméticos.

Challenges of nanotechnology in cosmetic permeation with caffeine / Desafios da nanotecnologia na permeação cosmética com cafeína

The evolution of beauty market and personal care is constant in Brazil as well in the rest of the world. Technological advances have brought up nanotechnology to the cosmetological field, employing active principles at atoms enveloped by vesicles, in order to take the active principle precisely to the target tissue to optimize the results achieved because of the considerable ease to cross skin barriers. Manufacturing of nanotechnology cosmetics is confronted with low absorption capacity. One of the many active principle found in cosmetic industry is caffeine, a pseudoalkaloid from the xanthine group used as a stimulant with the mechanism of the lipolytic action. This active is widely used in a esthetics and cosmetics field in treatments involving dysfunctions such as localized fat and fibroedema geloid. To work out perfectly, the principle active need to interact and create a set of factors that includes lipolysis intensification. The caffeine encapsulation in gel-based nanocosmetics has the purpose of taking this active up to the adipocyte, the target cell, for mentioned dysfunctions treatment. Thus, we aim to present a review of how has been, the use of caffeine in the production of cosmetics.

A evolução do mercado de beleza e cuidados pessoais é constante no Brasil e no resto do mundo. Os avanços tecnológicos trouxeram a nanotecnologia para o campo cosmetológico, empregando princípios ativos em átomos envolvidos por vesículas, a fim de levar o princípio ativo precisamente ao tecido alvo para otimizar os resultados alcançados devido à considerável facilidade de atravessar barreiras cutâneas. A fabricação de cosméticos nanotecnológicos é confrontada com baixa capacidade de absorção. Um dos muitos princípios ativos encontrados na indústria cosmética é a cafeína, um pseudoalocalóide do grupo xantina usado como estimulante no mecanismo da ação lipolítica. Este ativo é amplamente utilizado no campo da estética e dos cosméticos em tratamentos que envolvem disfunções, como gordura localizada e fibroedema gelóide. Para funcionar perfeitamente, o princípio ativo precisa interagir e criar um conjunto de fatores que inclui a intensificação da lipólise. O encapsulamento de cafeína em nanocosméticos à base de gel tem o objetivo de levar esse ativo até o adipócito, a célula alvo, para o tratamento de disfunções mencionado. Assim, objetivamos apresentar uma revisão de como tem sido o uso de cafeína na produção de cosméticos.

Quality of cosmetics with active caffeine in cream and gel galenic bases prepared by compounding pharmacies / Qualidade de cosméticos com cafeína ativa em bases galênicas em creme e gel preparadas por farmácias de manipulação

As there is a great scarcity of studies on the importance of good compounding practices in the preparation of cosmetics, this study aimed to evaluate the quality control of cosmetics with active ingredient caffeine for the treatment of cellulite prepared by magistrals pharmacies. Microbiological analyzes, pH determination, color measurement, quantification of the percentage of the active ingredient caffeine and viscosity in creams and gels with 5% of the active ingredient caffeine were performed. In the microbiological analysis, the presence of molds and yeasts was verified above the permitted level according to the Brazilian pharmacopoeia. The pH decreased over time, contributing to the formulations becoming more acidic. In the color parameters, it was found that pharmacy F4 showed a brownish color, both for the gel and for the cream. The percentage of caffeine was within specifications in all formulations and the viscosity remained unchanged during the shelf life of the samples. It is important that the compounding pharmacies demand more effectively the commitment of the team, as well as the analysis of the raw material according to the microbiological control regulations to translate into the quality of the products prepared by the pharmacies and favor the consumer in the effective objective that the product you want to achieve.

Como há uma grande escassez de estudos sobre a importância de boas práticas de manipulação na elaboração de cosméticos, o presente estudo teve como objetivo avaliar o controle de qualidade de cosméticos com princípio ativo cafeína para o tratamento de celulite, elaborados por farmácias de manipulação de Campo Mourão. Foram realizadas análises microbiológicas, determinação do pH, mensuração da coloração, quantificação da porcentagem do princípio ativo cafeína e viscosidade em cremes e geís com 5% do princípio ativo cafeína. Nas análises microbiológicas foi verificada a presença de bolores e leveduras acima do pemitido segundo a farmacopéia brasileira. O pH diminuiu ao longo do tempo, contribuindo para que as formulações ficassem mais ácidas. Nos parâmetros de cor averiguou-se que a farmácia F4 apresentou uma coloração amarronzada, tanto para o gel quanto para o creme. A porcentagem de cafeína estava dentro das especificações em todas as formulações e a viscosidade se manteve inalterada durante o prazo de validade das amostras. Com o propósito de um melhor preparo magistral é importante que as farmácias de manipulação exijam de forma mais eficaz o comprometimento da equipe, bem como a análise da matéria-prima segundo as regulamentações de controle microbiológico. Além disso, a implementação de normas mais rígidas e o melhor controle da matéria-prima e das formulações finais fazem com que a qualidade dos produtos manipulados pelas farmácias magistrais seja aumentada significativamente, favorecendo o consumidor na efetiva finalidade a que o produto objetiva atingir.

Challenges of nanotechnology in cosmetic permeation with caffeine

Abstract The evolution of beauty market and personal care is constant in Brazil as well in the rest of the world. Technological advances have brought up nanotechnology to the cosmetological field, employing active principles at atoms enveloped by vesicles, in order to take the active principle precisely to the target tissue to optimize the results achieved because of the considerable ease to cross skin barriers. Manufacturing of nanotechnology cosmetics is confronted with low absorption capacity. One of the many active principle found in cosmetic industry is caffeine, a pseudoalkaloid from the xanthine group used as a stimulant with the mechanism of the lipolytic action. This active is widely used in a esthetics and cosmetics field in treatments involving dysfunctions such as localized fat and fibroedema geloid. To work out perfectly, the principle active need to interact and create a set of factors that includes lipolysis intensification. The caffeine encapsulation in gel-based nanocosmetics has the purpose of taking this active up to the adipocyte, the target cell, for mentioned dysfunctions treatment. Thus, we aim to present a review of how has been, the use of caffeine in the production of cosmetics.

Resumo A evolução do mercado de beleza e cuidados pessoais é constante no Brasil e no resto do mundo. Os avanços tecnológicos trouxeram a nanotecnologia para o campo cosmetológico, empregando princípios ativos em átomos envolvidos por vesículas, a fim de levar o princípio ativo precisamente ao tecido alvo para otimizar os resultados alcançados devido à considerável facilidade de atravessar barreiras cutâneas. A fabricação de cosméticos nanotecnológicos é confrontada com baixa capacidade de absorção. Um dos muitos princípios ativos encontrados na indústria cosmética é a cafeína, um pseudoalocalóide do grupo xantina usado como estimulante no mecanismo da ação lipolítica. Este ativo é amplamente utilizado no campo da estética e dos cosméticos em tratamentos que envolvem disfunções, como gordura localizada e fibroedema gelóide. Para funcionar perfeitamente, o princípio ativo precisa interagir e criar um conjunto de fatores que inclui a intensificação da lipólise. O encapsulamento de cafeína em nanocosméticos à base de gel tem o objetivo de levar esse ativo até o adipócito, a célula alvo, para o tratamento de disfunções mencionado. Assim, objetivamos apresentar uma revisão de como tem sido o uso de cafeína na produção de cosméticos.