Human papillomavirus type distribution in invasive cervical cancer and high-grade cervical intraepithelial neoplasia across 5 countries in Asia.

OBJECTIVE: Independent, prospective, multicenter, hospital-based cross-sectional studies were conducted across 5 countries in Asia, namely, Malaysia, Vietnam, Singapore, South Korea, and the Philippines. The objectives of these studies were to evaluate the prevalence of human papillomavirus (HPV) types (high risk and others including coinfections) in women with invasive cervical cancer (ICC) and high-grade precancerous lesions. METHODS: Women older than 21 years with a histologic diagnosis of ICC and cervical intraepithelial neoplasia [CIN 2 or 3 and adenocarcinoma in situ (AIS)] were enrolled. Cervical specimens were reviewed by histopathologists to confirm the presence of ICC or CIN 2/3/AIS lesion and tested with short PCR fragment 10-DNA enzyme immunoassay-line probe assay for 14 oncogenic HPV types and 11 non-oncogenic HPV types. The prevalence of HPV 16, HPV 18, and other high-risk HPV types in ICC [including squamous cell carcinoma (SCC) and adenocarcinoma/adenosquamous carcinoma (ADC/ASC)] and CIN 2/3/AIS was estimated. RESULTS: In the 5 Asian countries, diagnosis of ICC was confirmed in 500 women [SCC (n = 392) and ADC/ASC (n = 108)], and CIN 2/3/AIS, in 411 women. Human papillomavirus DNA was detected in 93.8% to 97.0% (84.5% for the Philippines) of confirmed ICC cases [94.0%-98.7% of SCC; 87.0%-94.3% (50.0% for the Philippines) of ADC/ASC] and in 93.7% to 100.0% of CIN 2/3/AIS. The most common types observed among ICC cases were HPV 16 (36.8%-61.3%), HPV 18 (12.9%-35.4%), HPV 52 (5.4%-10.3%), and HPV 45 (1.5%-17.2%), whereas among CIN 2/3/AIS cases, HPV 16 (29.7%-46.6%) was the most commonly observed type followed by HPV 52 (17.0%-66.7%) and HPV 58 (8.6%-16.0%). CONCLUSIONS: This article presents the data on the HPV prevalence, HPV type distribution, and their role in cervical carcinogenesis in 5 Asian countries. These data are of relevance to public health authorities for evaluating the existing and future cervical cancer prevention strategies including HPV-DNA testing-based screening and HPV vaccination in these Asian populations.

Three-dimensional pore characterization of poly(lactic)acid/bamboo biodegradable panels.

In the context of novel environmental and energy regulations in construction (RE2020), biocomposites derived from bamboo fibers, bamboo powders, and biodegradable poly(lactic)acid polymer, all of which are renewable resources, have been investigated to meet the criteria of the novel regulations. In this work, the biocomposites were manufactured by twin-screw internal mixing at 170 °C for 5 min with a rotation speed of 60 rpm. The composites sheets were then shaped on a hydraulic press at 185 °C. Pore characterization including pore volume fraction, 3D-pore structure and morphology, and pore distribution of these materials were investigated using X-ray tomography combined with image processing (Avizo). The results show that when the bamboo fibers content is increased, an augmentation in the pore volume fraction and the number of large-volume pores could be observed. In turn, the bamboo powder-containing sheet had a significant increase in pore volume fraction, while a higher quantity of smaller pores, with uniform size, could be observed. The water absorption capacity of these composite increases with the increase of the amount of pore distribution, pore connection, and pore volume fraction. In addition, the orientation of the fibers in 3D observation, flexural mechanical properties, and thermal stability of the biocomposites are also reported in this study.

Synergistic Influences of Stearic Acid Coating and Recycled PET Microfibers on the Enhanced Properties of Composite Materials.

This study aims to produce novel composite artificial marble materials by bulk molding compound processes, and improve their thermal and mechanical properties. We employed stearic acid as an efficient surface modifying agent for CaCO3 particles, and for the first time, a pretreated, recycled, polyethylene terephthalate (PET) fibers mat is used to reinforce the artificial marble materials. The innovative aspects of the study are the surface treatment of CaCO3 particles by stearic acid. Stearic acid forms a monolayer shell, coating the CaCO3 particles, which enhances the compatibility between the CaCO3 particles and the matrix of the composite. The morphology of the composites, observed by scanning electron microscopy, revealed that the CaCO3 phase was homogeneously dispersed in the epoxy matrix under the support of stearic acid. A single layer of a recycled PET fibers mat was pretreated and designed in the core of the composite. As expected, these results indicated that the fibers could enhance flexural properties, and impact strength along with thermal stability for the composites. This combination of a pretreated, recycled, PET fibers mat and epoxy/CaCO3-stearic acid could produce novel artificial marble materials for construction applications able to meet environmental requirements.

HIV/AIDS infection rate in pregnant women attended at the Hung Vuong hospital in the period of 1996-2003

The number of pregnant women affected with HIV/AIDS in Hung Vuong hospital has increased rapidly. During 8 years (1996-2003), the rate increased from 0,05% to 0,81% (2002) and decreased to 0,7% in 2003. The percentage of HIV positive pregnant women below 19 years old has increased from 12,5% (1996-1998) to 16,8% (1996-2003). Primigravida with HIV(+) test have increased from 37,5% (1996-1998) to 60% (1996-2003). Number of HIV(+) pregnant women living in the suburb has increased from 23% (1996-1998) to 28,32% (2003), that means HIV has attacked women living in the countryside. Counselling is still be inadequate, as a result, 1,5% women who knew that they had HIV test(+) continued to have another pregnancy. So, it is necessary to strengthen IEC to prevent transmission HIV in the community, especially from mothers to their children