Conformation-Controlled Diplatinum(II)-Ferrocene Dyads to Achieve Long-Lived Charge-Separated States.

Square-planar polypyridyl platinum(II) complexes possess a rich range of structural and spectroscopic properties that are ideal for designing artificial photosynthetic centers. Taking advantage of the directionality in the charge-transfer excitation from the metal to the polypyridyl ligand, we describe here diplatinum(II)-ferrocene dyads, open-butterfly-like dyad 1 and closed-butterfly-like dyad 2, which were designed to understand the conformation and orientation effects to prolong the lifetime of charge-separated state. In contrast to the open-butterfly-like dyad 1, the closed-butterfly-like dyad 2 shows three-times long lifetime of charge separated state upon photoexcitation, demonstrating that the orientation in the rigid structure of dyad 2 is a very important issue to achieve long-lived charge separated state.

Ionized copolyesters with pH-responsive degradability: Accelerated degradation in specific environments.

The development of environmentally responsive biodegradable polymers is a promising solution for balancing the stability and degradability of biodegradable plastics. In this study, a commercial biodegradable polyester, poly(butylene adipate-co-butylene terephthalate) (PBAT), was used as the substrate and was synthetically modified with a small amount of anionic sodium 1-3-isophthalate-5-sulfonate (SIPA) to obtain the ionized random poly(butylene adipate-co-butylene terephthalate-co-butylene 5-sodiosulfoisophthalate) (PBATS). The introduction of the sodium sulfonate ionic group enhanced the mechanical and heat-resistant properties of the material, while significantly improving the hydrophilicity and water absorption of the copolyesters of PBATSs and endowing them with special pH-responsive degradation properties. Compared with PBAT, PBATS copolyesters could accelerate degradation in acidic or alkaline buffer solutions and natural seawater, while degradation was inhibited in neutral buffer solutions at pH 7.2. Degradation experiments in simulated gastric, intestinal, and body fluids revealed that the copolyester showed specific and rapid degradation in acidic gastric fluids. This environmentally-responsive degradable material greatly expands the special applications of biodegradable polyesters in the fields of environmental remediation and medical applications.

Water-soluble biodegradable polyesters with pH and ionic responsivity.

The synthesis of novel water-soluble polymers with biodegradability is an effective way to mitigate their negative environmental impacts. In this study, semi-aromatic copolyester poly(butylene succinate-co-butylene terephthalate) (PBST) with exceptional biodegradability is used as the resin matrix. Anionic sodium 1-3-isophthalate-5-sulfonate (SIPA) is introduced as a fourth monomer to prepare random poly(butylene succinate-co-butylene terephthalate-co-butylene 5-sodiosulfoisophthalate) (PBSTS) copolyesters by melt copolymerization. The incorporation of ionic groups enhances the hydrophilicity and water absorption of the copolyesters, resulting in water-soluble materials that exhibit ionic and temperature responsivity. Furthermore, the ionized biodegradable copolyesters demonstrate distinct pH-dependent degradation, which is accelerated at pH = 5.5 and 8.5 but inhibited at pH = 7.2. Degradation assessments in simulated body fluids reveal that the PBSTS copolyesters exhibit significant degradation in gastric fluids at pH = 1.5 with minimal degradation in intestinal fluids at pH = 6.8 and in body fluids at pH = 7.0. This unique degradation performance highlights the potential of these materials for addressing the challenges associated with selective drug delivery and localized controlled release in the human body.

A highly efficient and selective aerobic cross-dehydrogenative-coupling reaction photocatalyzed by a platinum(II) terpyridyl complex.

Thanks to the superior redox potential of platinum(II) complex compared with that of Ru(bpy)3(2+) in the excited state, an efficient and selective visible-light-induced CDC reaction has been developed by using a catalytic amount (0.25 %) of 1. With the aid of FeSO4 (2 equiv), the corresponding amide could not be detected under visible-light irradiation (λ=450 nm), but the desired cross-coupling product was exclusively obtained under ambient air conditions. A spectroscopic study and product analysis revealed that the CDC reaction is initiated by photoinduced electron-transfer from N-phenyltetrahydroisoquinoline to the complex. An EPR (electron paramagnetic resonance) experiment provides direct evidence on the generation of superoxide radical anion (O2(-·)) rather than singlet oxygen ((1)O2) under irradiation of the reaction system, in contrast to that reported in the literature. Combined, the photoinduced electron-transfer and subsequent formation of superoxide radical anion (O2(-·)) results in a clean and facile transformation.

Photoinduced triplet-triplet energy transfer in a 2-ureido-4(1H)-pyrimidinone-bridged, quadruply hydrogen-bonded ferrocene-fullerene assembly.

2-Ureido-4(1H)-pyrimidinone-bridged ferrocene-fullerene assembly I is designed and synthesized for elaborating the photoinduced electron-transfer processes in self-complementary quadruply hydrogen-bonded modules. Unexpectedly, steady-state and time-resolved spectroscopy reveal an inefficient electron-transfer process from the ferrocene to the singlet or triplet excited state of the fullerene, although the electron-transfer reactions are thermodynamically feasible. Instead, an effective intra-assembly triplet-triplet energy-transfer process is found to be operative in assembly I with a rate constant of 9.2×10(5) s(-1) and an efficiency of 73% in CH(2)Cl(2) at room temperature.

All-natural environmentally degradable poly (butylene terephthalate-co-caprolactone): A theoretical and experimental study of its degradation properties and mechanisms.

The design and production of materials with excellent mechanical properties and biodegradability face significant challenges. Poly (butylene terephthalate-co-caprolactone) copolyesters (PBTCL) is obtained by modifying the engineering plastic polybutylene terephthalate (PBT) with a simple one-pot process using readily biodegradable ε-caprolactone (ε-CL). The material has mechanical properties comparable to those of commercial biodegradable copolyester PBAT. Besides, this copolyester exhibited remarkable degradability in natural environments such as soil and ocean, for example, PBTCL1.91 lost >40 % of its weight after 6 months of immersion in the Bohai Sea. The effect and diversity of specific microorganisms acting on degradation in the ocean were analyzed by 16 s rDNA gene sequencing. Theoretical calculations such as Fukui function and DFT, and experimental studies on water-soluble intermediates and residual matrixes produced after degradation, confirmed that the insertion CL units not only act as active sites themselves susceptible to hydrolysis reactions, but also promote the reactivity of ester bonds between aromatic segments. This work provides insight for the development of novel materials with high performance and environmental degradability.

Enhanced degradation of poly(ethylene terephthalate) by the addition of lactic acid / glycolic acid: composting degradation, seawater degradation behavior and comparison of degradation mechanism.

The degradability improvement of poly(ethylene terephthalate) (PET), one of the most widely used but non-degradable disposable packaging material, is of great significance. However, the balance between degradability and mechanical properties remains a huge challenge. Herein, simple hydroxy acids, lactic acid (LA) and glycolic acid (GA) as easy hydrolysis sites were introduced into non-degradable PET via melt polycondensation. A series of high molecular weight poly(ethylene terephthalate-co-L­lactide) (PETL) and poly(ethylene terephthalate-co-glycolate) (PETG) copolyesters were synthesized with an excellent tensile strength greater than 50 MPa, much higher than that of most commercially available degradable polymers. The introduction of hydroxy acid endows PET with significantly improved composting and seawater degradation performance. Furtherly, the degradation rate of PETG with hydrophilic GA unit was faster than that of PETL, and the mineralization rate of PETG80 reaches 22.0%. The density of functional theory (DFT) calculation revealed that adding hydroxy acid to the PET molecular chain reduced the energy barrier of the hydrolysis reaction. The molecular polarity index (MPI) analysis furtherly confirmed that the higher affinity between the GA unit and water may be the primary reason for the faster degradation of PETG.

Fluorescence tracing the degradation process of biodegradable PBAT: Visualization and high sensitivity.

Biodegradable plastics have emerged as a potential solution to the mounting plastic pollution crisis. However, current methods for evaluating the degradation of these plastics are limited in detecting structural changes rapidly and accurately, particularly for PBAT, which contains worrying benzene rings. Inspired by the fact that the aggregation of conjugated groups can endow polymers with intrinsic fluorescence, this work found that PBAT emits a bright blue-green fluoresces under UV irradiation. More importantly, we pioneered a degradation evaluation approach to track the degradation process of PBAT via fluorescence. A blue shift of fluorescence wavelength as the thickness and molecular weight of PBAT film decreased during degradation in an alkali solution was observed. Additionally, the fluorescence intensity of the degradation solution increased gradually as the degradation progressed, and was found to be exponentially correlated with the concentration of benzene ring-containing degradation products following filtration with the correlation coefficient is up to 0.999. This study proposes a promising new strategy for monitoring the degradation process with visualization and high sensitivity.

Multistimuli responsive micelles formed by a tetrathiafulvalene-functionalized amphiphile.

An electroactive tetrathiafulvalene (TTF)-functionalized amphiphile 1 was designed and synthesized to investigate its self-assembling behavior in water. Dynamic light scattering (DLS), (1)H NMR, fluorescence spectrum, and cryogenic transmission electron microscopy (cryo-TEM) studies revealed that amphiphile 1 can form micelle-like aggregates via direct dissolution into water, and the micellar architectures could be disrupted either by addition of chemical oxidant Fe(ClO(4))(3) or by complexation with electron-deficient cyclobis(paraquat-p-phenylene) tetracation cyclophane (CBPQT(4+)) to release encapsulated hydrophobic dye Nile Red from the interior of micelles.

Seawater-Degradable Polymers-Fighting the Marine Plastic Pollution.

Polymers shape human life but they also have been identified as pollutants in the oceans due to their long lifetime and low degradability. Recently, various researchers have studied the impact of (micro)plastics on marine life, biodiversity, and potential toxicity. Even if the consequences are still heavily discussed, prevention of unnecessary waste is desired. Especially, newly designed polymers that degrade in seawater are discussed as potential alternatives to commodity polymers in certain applications. Biodegradable polymers that degrade in vivo (used for biomedical applications) or during composting often exhibit too slow degradation rates in seawater. To date, no comprehensive summary for the degradation performance of polymers in seawater has been reported, nor are the studies for seawater-degradation following uniform standards. This review summarizes concepts, mechanisms, and other factors affecting the degradation process in seawater of several biodegradable polymers or polymer blends. As most of such materials cannot degrade or degrade too slowly, strategies and innovative routes for the preparation of seawater-degradable polymers with rapid degradation in natural environments are reviewed. It is believed that this selection will help to further understand and drive the development of seawater-degradable polymers.

Reversible multistimuli-responsive vesicles formed by an amphiphilic cationic platinum(II) terpyridyl complex with a ferrocene unit in water.

An amphiphilic cationic platinum(II) terpyridyl complex 1 with a redox ferrocene unit has been demonstrated to form well-defined vesicular architectures that could be disrupted and regenerated reversibly by multi-stimuli in water. The hydrophobic and hydrophilic alternation of 1 was achieved via modulating its intramolecular ILCT state to MLCT state.