A three-dimensional liquid diode for soft, integrated permeable electronics.

Wearable electronics with great breathability enable a comfortable wearing experience and facilitate continuous biosignal monitoring over extended periods1-3. However, current research on permeable electronics is predominantly at the stage of electrode and substrate development, which is far behind practical applications with comprehensive integration with diverse electronic components (for example, circuitry, electronics, encapsulation)4-8. Achieving permeability and multifunctionality in a singular, integrated wearable electronic system remains a formidable challenge. Here we present a general strategy for integrated moisture-permeable wearable electronics based on three-dimensional liquid diode (3D LD) configurations. By constructing spatially heterogeneous wettability, the 3D LD unidirectionally self-pumps the sweat from the skin to the outlet at a maximum flow rate of 11.6 ml cm-2 min-1, 4,000 times greater than the physiological sweat rate during exercise, presenting exceptional skin-friendliness, user comfort and stable signal-reading behaviour even under sweating conditions. A detachable design incorporating a replaceable vapour/sweat-discharging substrate enables the reuse of soft circuitry/electronics, increasing its sustainability and cost-effectiveness. We demonstrated this fundamental technology in both advanced skin-integrated electronics and textile-integrated electronics, highlighting its potential for scalable, user-friendly wearable devices.

Inhibiting the Leidenfrost effect above 1,000 °C for sustained thermal cooling.

The Leidenfrost effect, namely the levitation of drops on hot solids1, is known to deteriorate heat transfer at high temperature2. The Leidenfrost point can be elevated by texturing materials to favour the solid-liquid contact2-10 and by arranging channels at the surface to decouple the wetting phenomena from the vapour dynamics3. However, maximizing both the Leidenfrost point and thermal cooling across a wide range of temperatures can be mutually exclusive3,7,8. Here we report a rational design of structured thermal armours that inhibit the Leidenfrost effect up to 1,150 °C, that is, 600 °C more than previously attained, yet preserving heat transfer. Our design consists of steel pillars serving as thermal bridges, an embedded insulating membrane that wicks and spreads the liquid and U-shaped channels for vapour evacuation. The coexistence of materials with contrasting thermal and geometrical properties cooperatively transforms normally uniform temperatures into non-uniform ones, generates lateral wicking at all temperatures and enhances thermal cooling. Structured thermal armours are limited only by their melting point, rather than by a failure in the design. The material can be made flexible, and thus attached to substrates otherwise challenging to structure. Our strategy holds the potential to enable the implementation of efficient water cooling at ultra-high solid temperatures, which is, to date, an uncharted property.

Design of robust superhydrophobic surfaces.

The ability of superhydrophobic surfaces to stay dry, self-clean and avoid biofouling is attractive for applications in biotechnology, medicine and heat transfer1-10. Water droplets that contact these surfaces must have large apparent contact angles (greater than 150 degrees) and small roll-off angles (less than 10 degrees). This can be realized for surfaces that have low-surface-energy chemistry and micro- or nanoscale surface roughness, minimizing contact between the liquid and the solid surface11-17. However, rough surfaces-for which only a small fraction of the overall area is in contact with the liquid-experience high local pressures under mechanical load, making them fragile and highly susceptible to abrasion18. Additionally, abrasion exposes underlying materials and may change the local nature of the surface from hydrophobic to hydrophilic19, resulting in the pinning of water droplets to the surface. It has therefore been assumed that mechanical robustness and water repellency are mutually exclusive surface properties. Here we show that robust superhydrophobicity can be realized by structuring surfaces at two different length scales, with a nanostructure design to provide water repellency and a microstructure design to provide durability. The microstructure is an interconnected surface frame containing 'pockets' that house highly water-repellent and mechanically fragile nanostructures. This surface frame acts as 'armour', preventing the removal of the nanostructures by abradants that are larger than the frame size. We apply this strategy to various substrates-including silicon, ceramic, metal and transparent glass-and show that the water repellency of the resulting superhydrophobic surfaces is preserved even after abrasion by sandpaper and by a sharp steel blade. We suggest that this transparent, mechanically robust, self-cleaning glass could help to negate the dust-contamination issue that leads to a loss of efficiency in solar cells. Our design strategy could also guide the development of other materials that need to retain effective self-cleaning, anti-fouling or heat-transfer abilities in harsh operating environments.

A droplet-based electricity generator with high instantaneous power density.

Extensive efforts have been made to harvest energy from water in the form of raindrops1-6, river and ocean waves7,8, tides9 and others10-17. However, achieving a high density of electrical power generation is challenging. Traditional hydraulic power generation mainly uses electromagnetic generators that are heavy, bulky, and become inefficient with low water supply. An alternative, the water-droplet/solid-based triboelectric nanogenerator, has so far generated peak power densities of less than one watt per square metre, owing to the limitations imposed by interfacial effects-as seen in characterizations of the charge generation and transfer that occur at solid-liquid1-4 or liquid-liquid5,18 interfaces. Here we develop a device to harvest energy from impinging water droplets by using an architecture that comprises a polytetrafluoroethylene film on an indium tin oxide substrate plus an aluminium electrode. We show that spreading of an impinged water droplet on the device bridges the originally disconnected components into a closed-loop electrical system, transforming the conventional interfacial effect into a bulk effect, and so enhancing the instantaneous power density by several orders of magnitude over equivalent devices that are limited by interfacial effects.

A standing Leidenfrost drop with Sufi whirling.

When a water drop is placed on a hot solid surface, it either undergoes explosive contact boiling or exhibits a stable state. In the latter case, the drop floats over an insulating layer of vapor generated by rapid vaporization of water at the surface/drop interface; this is known as the Leidenfrost state. Here, we discuss a previously unrecognized steady state in which a water drop "stands" on a hot smooth surface. In this state, the drop stabilizes itself with partial adhesion on the hot surface, leading to unique deformation and rotation behavior reminiscent of Sufi whirling-a form of spinning dance. Our analysis of this standing Leidenfrost state reveals the underlying mechanisms that drive the drop's stable partial adhesion and subsequent deformation with rotation. The heat-transfer efficiency of this standing state is up to 390% greater than that of the traditional floating Leidenfrost state.

Electrostatic tweezer for droplet manipulation.

Various physical tweezers for manipulating liquid droplets based on optical, electrical, magnetic, acoustic, or other external fields have emerged and revolutionized research and application in medical, biological, and environmental fields. Despite notable progress, the existing modalities for droplet control and manipulation are still limited by the extra responsive additives and relatively poor controllability in terms of droplet motion behaviors, such as distance, velocity, and direction. Herein, we report a versatile droplet electrostatic tweezer (DEST) for remotely and programmatically trapping or guiding the liquid droplets under diverse conditions, such as in open and closed spaces and on flat and tilted surfaces as well as in oil medium. DEST, leveraging on the coulomb attraction force resulting from its electrostatic induction to a droplet, could manipulate droplets of various compositions, volumes, and arrays on various substrates, offering a potential platform for a series of applications, such as high-throughput surface-enhanced Raman spectroscopy detection with single measuring time less than 20 s.

Surface Nanostructures Promote Droplet Splash on Hot Substrates.

Splash, one of the most visually apparent droplet dynamics, can manifest on any surface above a certain impact velocity, regardless of surface wettability. Previous studies demonstrate that elevating the substrate temperature can suppress droplet splash, which is unfavorable for many practical applications, such as spray cooling and combustion. Here, we report that the suppression effect of substrate temperature on splash is nullified by utilizing surfaces with nanostructures. By manipulating air evacuation time through surface nanostructures, we have identified a pathway for precise control over the splash threshold and the ability to tailor the dependence of the splash onset on surface temperature. We further propose a theoretical criterion to determine different splash regimes by considering the competition between air evacuation and the development of flow instabilities. Our findings underscore the crucial role of nanostructures in splash dynamics, offering valuable insights for the control of splash in various industrial scenarios.

Low-Pressure Pancake Bouncing on Superhydrophobic Surfaces.

A new form of pancake bouncing is discovered in this work when a droplet impacts onto micro-structured superhydrophobic surfaces in an environment pressure less than 2 kPa, and an unprecedented reduction of contact time by ≈85% is obtained. The mechanisms of forming this unique phenomenon are examined by combining experimental observation, numeical modelling and an improved theoretical model for the overpressure effect arising from the vaporisation inside micro-scaled structures. The competition among the vapor overpressure effect, the droplet impact force, and the surface adhesion determines if the pancake bouncing behavior could occur. After the lift-off the lamella, the pancake bouncing is initiated and its subsequent dynamics is controlled by the internal momentum transfer. Complementary to the prior studies, this work enriches the knowledge of droplet dynamics in low pressure, which allows new strategies of surface morphology engineering for droplet control, an area of high importance for many engineering applications.

Superhydrophobic Designs for Durable Radiative Cooling.

Passive radiative cooling technology is an eco-friendly and energy-free alternative to conventional cooling systems. However, a major challenge in implementing radiative cooling in an outdoor environment is the presence of contamination, which significantly degrades the cooling effectiveness. In response to this challenge, researchers have explored superhydrophobic radiative coolers with self-cleaning abilities as a potential solution. In this Perspective, we summarize the latest progress and highlight certain design principles and strategies for integrating superhydrophobicity into radiative cooling structures. These strategies can be classified into three distinct categories: spraying particles, constructing pores, and creating patterns. Finally, we identify future challenges and opportunities in superhydrophobic radiative coolers, intending to push the technology toward practical applications.

Heterogenous Slippery Surfaces: Enabling Spontaneous and Rapid Transport of Viscous Liquids with Viscosities Exceeding 10 000 mPa s.

Superhydrophobic and slippery lubricant-infused surfaces have garnered significant attention for their potential to passively transport low-viscosity liquids like water (1 mPa s). Despite exciting progress, these designs have proven ineffective for transporting high-viscosity liquids such as polydimethylsiloxane (5500 mPa s) due to their inherent limitations imposed by the homogenous surface design, resulting in high viscous drags and compromised capillary forces. Here, a heterogenous water-infused divergent surface (WIDS) is proposed that achieves spontaneous, rapid, and long-distance transport of viscous liquids. WIDS reduces viscous drag by spatially isolating the viscous liquids and surface roughness through its heterogenous, slippery topological design, and generates capillary forces through its heterogenous wetting distributions. The essential role of surface heterogeneity in viscous liquid transport is theoretically and experimentally verified. Remarkably, such a heterogenous paradigm enables transporting liquids with viscosities exceeding 12 500 mPa s, which is two orders of magnitude higher than state-of-the-art techniques. Furthermore, this heterogenous design is generic for various viscous liquids and can be made flexible, making it promising for various systems that require viscous liquid management, such as micropatterning.

Self-Adaptive Droplet Bouncing on a Dual Gradient Surface.

Rapid detachment of impacting droplets from underlying substrate is highly preferred for mass, momentum, and energy exchange in many practical applications. Driven by this, the past several years have witnessed a surge in engineering macrotexture to reduce solid-liquid contact time. Despite these advances, these strategies in reducing contact time necessitate the elegant control of either the spatial location for droplet contact or the range of impacting velocity. Here, this work circumvents these limitations by designing a dual gradient surface consisting of a vertical spacing gradient made of tapered pillar arrays and a lateral curvature gradient characterized as macroscopic convex. This design enables the impacting droplets to self-adapt to asymmetric or pancake bouncing mode accordingly, which renders significant contact time reduction (up to ≈70%) for a broad range of impacting velocities (≈0.4-1.4 m s-1 ) irrespective of the spatial impacting location. This new design provides a new insight for designing liquid-repellent surfaces, and offers opportunities for applications including dropwise condensation, energy conversion, and anti-icing.

Liquid-Repellent Surfaces.

Surfaces are vibrant sites for various activities with environments, especially as the transfer station for mass and energy exchange. In nature, natural creatures exhibit special wetting and interfacial properties such as water repellency and water affinity to adapt to various environmental challenges by taking advantage of air or liquid infusion media. Inspired by natural surfaces, various engineered liquid-repellent surfaces have been developed with a wide range of applications in both open and closed underwater environments. In particular, underwater conditions are characterized by high viscosity, high pressure, and complex compositions, which pose more challenges for the design of robust and functional repellent surfaces. In this Perspective, we take a parallel approach to introduce two classical liquid-repellent surfaces: an air-infused repellent surface and a lubricated liquid-repellent surface. Then we highlight fundamental challenges and design configurations of robust liquid-repellent surfaces both in air and underwater. We summarize the advantages and drawbacks of two kinds of repellent surfaces and list several applications of liquid-repellent surfaces for use in the ocean, medical care, and energy harvesting. Finally, we provide an outlook of research directions for robust liquid-repellent surfaces.

Crack engineering for the construction of arbitrary hierarchical architectures.

Three-dimensional hierarchical morphologies widely exist in natural and biomimetic materials, which impart preferential functions including liquid and mass transport, energy conversion, and signal transmission for various applications. While notable progress has been made in the design and manufacturing of various hierarchical materials, the state-of-the-art approaches suffer from limited materials selection, high costs, as well as low processing throughput. Herein, by harnessing the configurable elastic crack engineering-controlled formation and configuration of cracks in elastic materials-an effect normally avoided in various industrial processes, we report the development of a facile and powerful technique that enables the faithful transfer of arbitrary hierarchical structures with broad material compatibility and structural and functional integrity. Our work paves the way for the cost-effective, large-scale production of a variety of flexible, inexpensive, and transparent 3D hierarchical and biomimetic materials.

Rapid and Persistent Suction Condensation on Hydrophilic Surfaces for High-Efficiency Water Collection.

Water collection by dew condensation emerges as a sustainable solution to water scarcity. However, the transient condensation process that involves droplet nucleation, growth, and transport imposes conflicting requirements on surface properties. It is challenging to satisfy all benefits for different condensation stages simultaneously. By mimicking the structures and functions of moss Rhacocarpus, here, we report the attainment of dropwise condensation for efficient water collection even on a hydrophilic surface gated by a liquid suction mechanism. The Rhacocarpus-inspired porous surface (RIPS), which possesses a three-level wettability gradient, facilitates a rapid, directional, and persistent droplet suction. Such suction condensation enables a low nucleation barrier, frequent surface refreshing, and well-defined maximum droplet shedding radius simultaneously. Thus, a maximum ∼160% enhancement in water collection performance compared to the hydrophobic surface is achieved. Our work provides new insights and a design route for developing engineered materials for a wide range of water-harvesting and phase-change heat-transfer applications.

Horizontal Motion of a Superhydrophobic Substrate Affects the Drop Bouncing Dynamics.

While the drop impact dynamics on stationary surfaces has been widely studied, the way a drop impacts a moving solid is by far less known. Here, we report the physical mechanisms of water drops impacting on superhydrophobic surfaces with horizontal motions. We find that a viscous force is created due to the entrainment of a thin air layer between the liquid and solid interfaces, which competes with the capillary and inertia forces, leading to an asymmetric elongation of the drop and an unexpected contact time reduction. Our experimental and theoretical results uncover consolidated scaling relations: the maximum spreading diameter is controlled by both the Weber and capillary numbers D_{max}/D_{0}∼We^{1/4}Ca^{1/6}, while the dimensionless contact time depends on the capillary number τ/τ_{0}∼Ca^{-1/6}. These findings strengthen our fundamental understandings of interactions between drops and moving solids and open up new opportunities for controlling the preferred water repellency through largely unexplored active approaches.

Directional Liquid Transport from the Cold Region to the Hot Region on a Topological Surface.

Manifested from the "tears of wine" to the "coffee-ring effect", the directional transport of a liquid governed by the Marangoni effect is highly pervasive in our daily life and has brought a great number of applications. Similar to this surface tension gradient-dominated process, the fluid preferentially flows from the hot region to the cold region. In contrast to this perception, in this study, we report that water liquid deposited on a specially designed topological surface can flow from the low-temperature region to the high-temperature region in a spontaneous, long-range, and unidirectional manner. We show that such a behavior is mainly owing to a strong topological effect that outweighs the thermal gradient imposed along the surface. Moreover, the specific temperature range applied on the topological surface for the occurrence of such a unidirectional liquid transport phenomenon is also identified. Our findings would find important insights for developing next-generation cooling devices where a rapid flow from the condensation region to the evaporation/boiling region is preferred.

Hydrophilic Slippery Surface Promotes Efficient Defrosting.

Frost accretion occurs ubiquitously in various industrial applications and causes tremendous energy and economic loss, as manifested by the Texas power crisis that impacted millions of people over a vast area in 2021. To date, extensive efforts have been made on frost removal by micro-engineering surfaces with superhydrophobicity or lubricity. On such surfaces, air or oil cushions are introduced to suspend the frost layer and promote the rapid frost sliding off, which, although promising, faces the instability of the cushions under extreme frosting conditions. Most existing hydrophilic surfaces, characterized by large interfacial adhesion, have long been deemed unfavorable for frost shedding. Here, we demonstrated that a hydrophilic and slippery surface can achieve efficient defrosting. On such a surface, the hydrophilicity gave rise to a highly interconnected basal frost layer that boosted the substrate-to-frost heat transfer; then, the resulting melted frost readily slid off the surface due to the superb slipperiness. Notably, on our surface, the retained meltwater coverage after frost sliding off was only 2%. In comparison to two control surfaces, for example, surfaces lacking either hydrophilicity or slipperiness, the defrosting efficiency was 13 and 19 times higher and the energy consumption was 2.3 and 6.2 times lower, respectively. Our study highlights the use of a hydrophilic surface for the pronounced defrosting in a broad range of industrial applications.

Mussel-inspired hydrogels: from design principles to promising applications.

Mussel-inspired chemistry, owing to its unique and versatile functions to manipulate dynamic molecular-scale interactions, has emerged as a powerful tool for the rational design and synthesis of new hydrogels. In particular, possessing a myriad of unique advantages that are otherwise impossible by conventional counterparts, mussel-inspired hydrogels have been widely explored in numerous fields such as biomedical engineering, soft electronics and actuators, and wearable sensors. Despite great excitement and vigor, a comprehensive and timely review on this emerging topic is missing. In this review, we discuss (1) the fundamental interaction mechanisms underpinning the spectacular wet adhesion in natural mussels and mussel-inspired materials; (2) the key routes to engineering hydrogels by leveraging on the interactions of mussel-inspired building blocks; (3) the emerging applications of mussel-inspired hydrogels, especially in the areas of flexible electronics and biomedical engineering; (4) the future perspectives and unsolved challenges of this multidisciplinary field. We envision that this review will provide an insightful perspective to stimulate new thinking and innovation in the development of next-generation hydrogels and beyond.

How Universal Is the Wetting Aging in 2D Materials.

Previous studies indicate that 2D materials such as graphene, WS2, and MoS2 deposited on oxidized silicon substrate are susceptible to aging due to the adsorption of airborne contamination. As a result, their surfaces become more hydrophobic. However, it is not clear how ubiquitous such a hydrophobization is, and the interplay between the specific adsorbed species and resultant wetting aging remains elusive. Here, we report a pronounced and general hydrophilic-to-hydrophobic wetting aging on 2D InSe films, which is independent of the substrates to synthesize these films (silicon, glass, nickel, copper, aluminum oxide), though the extent of wetting aging is sensitive to the layer of films. Our findings are ascribed to the occurrence and enrichment of airborne contamination that contains alkyl chains. Our results also suggest that the wetting aging effect might be universal to a wide range of 2D materials.

Desuccinylation-Triggered Peptide Self-Assembly: Live Cell Imaging of SIRT5 Activity and Mitochondrial Activity Modulation.

Mimicking nature's ability to orchestrate molecular self-assembly in living cells is important yet challenging. Molecular self-assembly has found wide applications in cellular activity control, drug delivery, biomarker imaging, etc. Nonetheless, examples of suborganelle-confined supramolecular self-assembly are quite rare and research in this area remains challenging. Herein, we have presented a new strategy to program supramolecular self-assembly specifically in mitochondria by leveraging on a unique enzyme SIRT5. SIRT5 is a mitochondria-localized enzyme belonging to a family of NAD+-dependent histone deacetylases. Accumulating studies suggest that SIRT5 is involved in regulating diverse biological processes, such as reactive oxygen defense, fatty acid metabolism, and apoptosis. In this study, we designed a novel class of succinylated peptide precursors that can be transformed into self-assembling building blocks through SIRT5 catalysis, leading to the formation of supramolecular nanofibers in vitro and in living cells. The increased hydrophobicity arising from self-assembly remarkably enhanced the fluorescence of nitrobenzoxadiazole (NBD) in the nanofibers. With this approach, we have enabled activity-based imaging of SIRT5 in living cells for the first time. Moreover, SIRT5-mediated peptide self-assembly was found to depolarize mitochondria membrane potential and promote ROS formation. Coincubation of the peptide with three different chemotherapeutic agents significantly boosted the anticancer activities of these drugs. Our work has thus illustrated a new way of mitochondria-confined peptide self-assembly for SIRT5 imaging and potential anticancer treatment.