Biological Utility of Fluorinated Compounds: from Materials Design to Molecular Imaging, Therapeutics and Environmental Remediation.

The applications of fluorinated molecules in bioengineering and nanotechnology are expanding rapidly with the controlled introduction of fluorine being broadly studied due to the unique properties of C-F bonds. This review will focus on the design and utility of C-F containing materials in imaging, therapeutics, and environmental applications with a central theme being the importance of controlling fluorine-fluorine interactions and understanding how such interactions impact biological behavior. Low natural abundance of fluorine is shown to provide sensitivity and background advantages for imaging and detection of a variety of diseases with 19F magnetic resonance imaging, 18F positron emission tomography and ultrasound discussed as illustrative examples. The presence of C-F bonds can also be used to tailor membrane permeability and pharmacokinetic properties of drugs and delivery agents for enhanced cell uptake and therapeutics. A key message of this review is that while the promise of C-F containing materials is significant, a subset of highly fluorinated compounds such as per- and polyfluoroalkyl substances (PFAS), have been identified as posing a potential risk to human health. The unique properties of the C-F bond and the significant potential for fluorine-fluorine interactions in PFAS structures necessitate the development of new strategies for facile and efficient environmental removal and remediation. Recent progress in the development of fluorine-containing compounds as molecular imaging and therapeutic agents will be reviewed and their design features contrasted with environmental and health risks for PFAS systems. Finally, present challenges and future directions in the exploitation of the biological aspects of fluorinated systems will be described.

Thermoresponsive Helical Dendronized Poly(phenylacetylene)s: Remarkable Stabilization of Their Helicity via Photo-Dimerization of the Dendritic Pendants.

Dynamic helical polymers can change their helicity according to external stimuli due to the low helix-inversion barriers, while helicity stabilization for polymers is important for applications in chiral recognition or chiral separations. Here, we present a convenient methodology to stabilize dynamic helical conformations of polymers through intramolecular cross-linking. Thermoresponsive dendronized poly(phenylacetylene)s (PPAs) carrying 3-fold dendritic oligoethylene glycol pendants containing cinnamate moieties were synthesized. These polymers exhibit typical features of dynamic helical structures in different solvents, that is, racemic contracted conformations in less polar organic solvents and predominantly one-handed stretched helical conformations in highly polar solvents. This dynamic helicity can be enhanced through selective solvation by increasing the polarity of the organic solvents or simply via their thermally mediated dehydration in water. However, through photocycloaddition of the cinnamate moieties between the neighboring pendants via UV irradiation, these dendronized PPAs adopt stable helical conformations either below or above their phase transition temperatures in water, and their helical conformations can even be retained in less polar organic solvents. Spectroscopic and atomic force microscopy measurements demonstrate that photocycloaddition between the cinnamate moieties occurs on the individual molecular level, and this is found to be helpful in restraining the photodegradation of the PPA backbones. Molecular dynamics simulations reveal that the spatial orientation of the pendants along the rigid polyene backbone is crucial for the photodimerization of cinnamates within one helix pitch.

Ultra-stable all-solid-state sodium metal batteries enabled by perfluoropolyether-based electrolytes.

Rechargeable batteries paired with sodium metal anodes are considered to be one of the most promising high-energy and low-cost energy-storage systems. However, the use of highly reactive sodium metal and the formation of sodium dendrites during battery operation have caused safety concerns, especially when highly flammable liquid electrolytes are used. Here we design and develop solvent-free solid polymer electrolytes (SPEs) based on a perfluoropolyether-terminated polyethylene oxide (PEO)-based block copolymer for safe and stable all-solid-state sodium metal batteries. Compared with traditional PEO SPEs, our results suggest that block copolymer design allows for the formation of self-assembled nanostructures leading to high storage modulus at elevated temperatures with the PEO domains providing transport channels even at high salt concentration (ethylene oxide/sodium = 8/2). Moreover, it is demonstrated that the incorporation of perfluoropolyether segments enhances the Na+ transference number of the electrolyte to 0.46 at 80 °C and enables a stable solid electrolyte interface. The new SPE exhibits highly stable symmetric cell-cycling performance at high current density (0.5 mA cm-2 and 1.0 mAh cm-2, up to 1,000 h). Finally, the assembled all-solid-state sodium metal batteries demonstrate outstanding capacity retention, long-term charge/discharge stability (Coulombic efficiency, 99.91%; >900 cycles with Na3V2(PO4)3 cathode) and good capability with high loading NaFePO4 cathode (>1 mAh cm-2).

Anti-Fouling Surfaces for Extracorporeal Membrane Oxygenation by Surface Grafting of Hydrophilic Sulfoxide Polymers.

Non-thrombogenic surfaces for extracorporeal membrane oxygenation (ECMO) devices are important to increase their duration of usage and to enable long-term life support. However, the contact of blood with the hydrophobic synthetic ECMO membrane materials such as poly(4-methyl-1-pentene) (PMP) can activate the coagulation cascade, causing thrombosis and a series of consequent complications during ECMO operation. Targeting this problem, we proposed to graft highly hydrophilic sulfoxide polymer brushes onto the PMP surfaces via gamma ray irradiation-initiated polymerization to improve the hemocompatibility of the membrane. Through this chemical modification, the surface of the PMP film is altered from hydrophobic to hydrophilic. The extent of plasma protein adsorption and platelet adhesion, the prerequisite mediators of the coagulation cascade and thrombus formation, are drastically reduced compared with those of the unmodified PMP film. Therefore, the method provides a facile approach to modify PMP materials with excellent antifouling properties and improved hemocompatibility demanded by the applications in ECMO and other blood-contacting medical devices.

Low-Fouling Gold Nanorod Theranostic Agents Enabled by a Sulfoxide Polymer Coating.

Gold nanorods (GNRs) are widely used in various biomedical applications such as disease imaging and therapy due to their unique plasmonic properties. To improve their bioavailability, GNRs often need to be coated with hydrophilic polymers so as to impart stealth properties. Poly(ethylene glycol) (PEG) has been long used as such a coating material for GNRs. However, there is increasing acknowledgement that the amphiphilic nature of PEG facilitates its interaction with protein molecules, leading to immune recognition and consequent side effects. This has motivated the search for new classes of low-fouling polymers with high hydrophilicity as alternative low-fouling surface coating materials for GNRs. Herein, we report the synthesis, characterization, and application of GNRs coated with highly hydrophilic sulfoxide-containing polymers. We investigated the effect of the sulfoxide polymer coating on the cellular uptake and in vivo circulation time of the GNRs and compared these properties with pegylated GNR counterparts. The photothermal effect and photoacoustic imaging of these polymer-coated GNRs were also explored, and the results show that these GNRs are promising as nanotheranostic particles for the treatment of cancer.

Efficient Removal of Perfluorinated Chemicals from Contaminated Water Sources Using Magnetic Fluorinated Polymer Sorbents.

Efficient removal of per- and polyfluoroalkyl substances (PFAS) from contaminated waters is urgently needed to safeguard public and environmental health. In this work, novel magnetic fluorinated polymer sorbents were designed to allow efficient capture of PFAS and fast magnetic recovery of the sorbed material. The new sorbent has superior PFAS removal efficiency compared with the commercially available activated carbon and ion-exchange resins. The removal of the ammonium salt of hexafluoropropylene oxide dimer acid (GenX) reaches >99 % within 30 s, and the estimated sorption capacity was 219 mg g-1 based on the Langmuir model. Robust and efficient regeneration of the magnetic polymer sorbent was confirmed by the repeated sorption and desorption of GenX over four cycles. The sorption of multiple PFAS in two real contaminated water matrices at an environmentally relevant concentration (1 ppb) shows >95 % removal for the majority of PFAS tested in this study.

Emergence of Hexagonally Close-Packed Spheres in Linear Block Copolymer Melts.

The hexagonally close-packed (HCP) sphere phase is predicted to be stable across a narrow region of linear block copolymer phase space, but the small free energy difference separating it from face-centered cubic spheres usually results in phase coexistence. Here, we report the discovery of pure HCP spheres in linear block copolymer melts with A = poly(2,2,2-trifluoroethyl acrylate) ("F") and B = poly(2-dodecyl acrylate) ("2D") or poly(4-dodecyl acrylate) ("4D"). In 4DF diblocks and F4DF triblocks, the HCP phase emerges across a substantial range of A-block volume fractions (circa fA = 0.25-0.30), and in F4DF, it forms reversibly when subjected to various processing conditions which suggests an equilibrium state. The time scale associated with forming pure HCP upon quenching from a disordered liquid is intermediate to the ordering kinetics of the Frank-Kasper σ and A15 phases. However, unlike σ and A15, HCP nucleates directly from a supercooled liquid or soft solid without proceeding through an intermediate quasicrystal. Self-consistent field theory calculations indicate the stability of HCP is intimately tied to small amounts of molar mass dispersity (D); for example, an HCP-forming F4DF sample with fA = 0.27 has an experimentally measured D = 1.04. These insights challenge the conventional wisdom that pure HCP is difficult to access in linear block copolymer melts without the use of blending or other complex processing techniques.

Antifouling Surfaces Enabled by Surface Grafting of Highly Hydrophilic Sulfoxide Polymer Brushes.

Antifouling surfaces are important in a broad range of applications. An effective approach to antifouling surfaces is to covalently attach antifouling polymer brushes. This work reports the synthesis of a new class of antifouling polymer brushes based on highly hydrophilic sulfoxide polymers by surface-initiated photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The sulfoxide polymer brushes are able to effectively reduce nonspecific adsorption of proteins and cells, demonstrating remarkable antifouling properties. Given the outstanding antifouling behavior of the sulfoxide polymers and versatility of surface-initiated PET-RAFT technology, this work presents a useful and general approach to engineering various material surfaces with antifouling properties, for potential biomedical applications in areas such as tissue engineering, medical implants, and regenerative medicine.

Rapid Generation of Block Copolymer Libraries Using Automated Chromatographic Separation.

A versatile and scalable strategy is reported for the rapid generation of block copolymer libraries spanning a wide range of compositions starting from a single parent copolymer. This strategy employs automated and operationally simple chromatographic separation that is demonstrated to be applicable to a variety of block copolymer chemistries on multigram scales with excellent mass recovery. The corresponding phase diagrams exhibit increased compositional resolution compared to those traditionally constructed via multiple, individual block copolymer syntheses. Increased uniformity and lower dispersity of the chromatographic libraries lead to differences in the location of order-order transitions and observable morphologies, highlighting the influence of dispersity on the self-assembly of block copolymers. Significantly, this separation technique greatly simplifies the exploration of block copolymer phase space across a range of compositions, monomer pairs, and molecular weights (up to 50000 amu), producing materials with increased control and homogeneity when compared to conventional strategies.

Use of Microfluidics to Fabricate Bioerodable Lipid Hybrid Nanoparticles Containing Hydromorphone or Ketamine for the Relief of Intractable Pain.

PURPOSE: For patients with intractable cancer-related pain, administration of strong opioid analgesics and adjuvant agents by the intrathecal (i.t.) route in close proximity to the target receptors/ion channels, may restore pain relief. Hence, the aim of this study was to use bioerodable polymers to encapsulate an opioid analgesic (hydromorphone) and an adjuvant drug (ketamine) to produce prolonged-release formulations for i.t. injection. METHODS: A two-stage microfluidic method was used to fabricate nanoparticles (NPs). The physical properties were characterised using dynamic light scattering and transmission electron microscopy. A pilot in vivo study was conducted in a rat model of peripheral neuropathic pain. RESULTS: The in vitro release of encapsulated payload from NPs produced with a polymer mixture (CPP-SA/PLGA 50:50) was sustained for 28 days. In a pilot in vivo study, analgesia was maintained over a three day period following i.t. injection of hydromorphone-loaded NPs at 50 µg. Co-administration of ketamine-loaded NPs at 340 µg did not increase the duration of analgesia significantly. CONCLUSIONS: The two-stage microfluidic method allowed efficient production of analgesic/adjuvant drug-loaded NPs. Our proof-of-principle in vivo study shows prolonged hydromorphone analgesic for 78 h after single i.t. injection. At the i.t. dose administered, ketamine released from NPs was insufficient to augment hydromorphone analgesia.

Low-Fouling Fluoropolymers for Bioconjugation and In†Vivo Tracking.

The conjugation of hydrophilic low-fouling polymers to therapeutic molecules and particles is an effective approach to improving their aqueous stability, solubility, and pharmacokinetics. Recent concerns over the immunogenicity of poly(ethylene glycol) has highlighted the importance of identifying alternative low fouling polymers. Now, a new class of synthetic water-soluble homo-fluoropolymers are reported with a sulfoxide side-chain structure. The incorporation of fluorine enables direct imaging of the homopolymer by 19 F MRI, negating the need for additional synthetic steps to attach an imaging moiety. These self-reporting fluoropolymers show outstanding imaging sensitivity and remarkable hydrophilicity, and as such are a new class of low-fouling polymer for bioconjugation and in vivo tracking.

Integrating Fluorinated Polymer and Manganese-Layered Double Hydroxide Nanoparticles as pH-activated 19 F MRI Agents for Specific and Sensitive Detection of Breast Cancer.

19 F magnetic resonance imaging (19 F MRI) agents capable of being activated upon interactions with cancer triggers are attracting increasing attention, although challenges still remain for precise and specific detection of cancer tissues. In this study, a novel hybrid 19 F MRI agent for pH-sensitive detection of breast cancer tissues is reported, a composite system designed by conjugating a perfluoropolyether onto the surface of manganese-incorporated layered double hydroxide (Mn-LDH@PFPE) nanoparticles. The 19 F NMR/MRI signals from aqueous solutions of Mn-LDH@PFPE nanoparticles are quenched at pH 7.4, but "turned on" following a reduction in pH to below 6.5. This is due to partial dissolution of Mn2+ from the Mn-LDH nanoparticles and subsequent reduction in the effect of paramagnetic relaxation. Significantly, in vivo experiments reveal that an intense 19 F MR signal can be detected only in the breast tumor tissue after intravenous injection of Mn-LDH@PFPE nanoparticles due to such a specific activation. Thus pH-activated Mn-LDH@PFPE nanoparticles are a potential "smart" 19 F MRI agent for precise and specific detection of cancer diseases.

Fluorinated Glycopolymers as Reduction-responsive 19F MRI Agents for Targeted Imaging of Cancer.

Imaging agents that can be targeted to specific diseases and respond to the microenvironment of the diseased tissue are of considerable interest due to their potential in diagnosing and managing diseases. Here we report a new class of branched fluorinated glycopolymers as 19F MRI contrast agents that respond to a reductive environment, for targeted imaging of cancer. The fluorinated glycopolymers can be readily prepared by a one-pot RAFT polymerization of glucose- and fluorine-containing monomers in the presence of a disulfide-containing cross-linking monomer. The incorporation of glucose units along the polymer chain enables these fluorinated glycopolymers to effectively target cancer cells due to interactions with the overexpressed sugar transporters present on the cell surface. In addition, the polymers exhibit an enhanced 19F MRI signal in response to a reductive environment, one of the unique hallmarks of many cancer cells, demonstrating their potential as promising candidates for targeted imaging of cancer.

Importance of Thermally Induced Aggregation on 19F Magnetic Resonance Imaging of Perfluoropolyether-Based Comb-Shaped Poly(2-oxazoline)s.

An understanding of thermally induced aggregation and consequent 19F magnetic resonance imaging (MRI) performance is essential for improved design of thermoresponsive 19F MRI contrast agents. Herein we describe a series of novel thermoresponsive perfluoropolyether (PFPE)-based comb-shaped poly(2-oxazoline)s (POxs) with different side-chain structures (2-methyl- (MeOx), 2-ethyl- (EtOx), and 2-( n-propyl)-2-oxazoline (nPrOx)). The comb polymers were prepared through reversible addition-fragmentation chain transfer (RAFT) polymerization of the respective oligo(2-oxazoline)acrylates using a perfluoropolyether macro-RAFT agent. The fluoropolyether chain end drives aggregation of the polymers, with small aggregates forming at 300 K for both poly(OMeOx5A)9-PFPE and poly(OEtOx4A)9-PFPE. The aggregates decrease in size and display increases in 19F MRI intensity with temperature, and at 350 K the MeOx polymers are in the form of unimers in solution, similar to the oligoethylene glycol (OEG)-based PFPE polymer. Above the TCP of poly(OEtOx4A)9-PFPE, the polymer forms large aggregates, and the 19F MR imaging performance is degraded. Likewise, poly(OnPrOx4A)-PFPE is above the LCST at all temperatures studied (300-350 K), and so weak imaging intensity is obtained. This report of novel thermoresponsive POx-based PFPE polymers highlights the importance of understanding self-association of polymers in solution and provides important insights for the development of "smart" thermoresponsive 19F MRI contrast agents.

Bioinspired Core-Shell Nanoparticles for Hydrophobic Drug Delivery.

A large range of nanoparticles have been developed to encapsulate hydrophobic drugs. However, drug loading is usually less than 10 % or even 1 %. Now, core-shell nanoparticles are fabricated having exceptionally high drug loading up to 65 % (drug weight/the total weight of drug-loaded nanoparticles) and high encapsulation efficiencies (>99 %) based on modular biomolecule templating. Bifunctional amphiphilic peptides are designed to not only stabilize hydrophobic drug nanoparticles but also induce biosilicification at the nanodrug particle surface thus forming drug-core silica-shell nanocomposites. This platform technology is highly versatile for encapsulating various hydrophobic cargos. Furthermore, the high drug loading nanoparticles lead to better in vitro cytotoxic effects and in vivo suppression of tumor growth, highlighting the significance of using high drug-loading nanoparticles.

Bioconjugation and Fluorescence Labeling of Iron Oxide Nanoparticles Grafted with Bromomaleimide-Terminal Polymers.

Iron oxide nanoparticles have been widely applied in biomedical applications for their unique physical properties. Despite the relatively mature synthetic approaches for iron oxide nanoparticles, surface modification strategies for obtaining particles with satisfactory biofunctionality are still urgently needed to meet the challenge of nanomedicine. Herein, we report a surface modification and biofunctionalization strategy for iron oxide-based magnetic nanoparticles based on a dibromomaleimide (DBM)-terminated polymer with brushed polyethylene glycol (PEG) chains. PEG acrylate and phosphonate monomers, serving as antibiofouling and surface anchoring compartments for iron oxide nanoparticles, were incorporated utilizing a novel DBM containing reversible addition-fragmentation chain transfer (RAFT) agent. The particles prepared through this new surface architecture possessed high colloidal stability in a physiological buffer and the capacity of covalent conjugation with biomolecules for targeting. Cell tracking of the molecular probes was achieved concomitantly by exploiting DBM conjugation-induced fluorescence of the nanoparticles.

Hydrogels with Lotus Leaf Topography: Investigating Surface Properties and Cell Adhesion.

The interactions of cells with the surface of materials is known to be influenced by a range of factors that include chemistry and roughness; however, it is often difficult to probe these factors individually without also changing the others. Here we investigate the role of roughness on cell adhesion while maintaining the same underlying chemistry. This was achieved by using a polymerization in mold technique to prepare poly(hydroxymethyl methacrylate) hydrogels with either a flat topography or a topography that replicated the microscale features of lotus leaves. These materials were then assessed for cell adhesion, and atomic force microscopy and contact angle analysis were then used to probe the physical reasons for the differing behavior in relation to cell adhesion.

Polymerization-Induced Self-Assembly (PISA) - Control over the Morphology of 19F-Containing Polymeric Nano-objects for Cell Uptake and Tracking.

Fluorine-containing polymeric materials are receiving increasing attention as imaging probes in fluorine-19 magnetic resonance imaging (19F MRI), for example to enable quantitative in vivo detection of cells. Here we describe the one-pot polymerization synthesis of 19F-containing functional poly(oligo(ethylene glycol) methyl ether methacrylate-co-2,2,2-trifluoroethyl acrylate-b-poly(styrene-co-3-vinylbenzaldehyde) (poly(OEGA-co-TFEA)-b-poly(St-co-VBA)) copolymers as a new class of fluorinated MRI agent. A range of nanoparticle morphologies, including spheres, worm-like particles, and vesicles were formed as a consequence of polymerization-induced self-assembly (PISA). It was found that the extent of cell uptake strongly depends on the morphology of the nano-objects, with preferable uptake for worm-like particles compared to spherical nanoparticles and vesicles. All the nano-objects have a single resonance in the 19F NMR spectrum with relatively short MRI relaxation times, which were independent of the morphology of the nano-objects. These results confirm that these polymeric nano-objects of varied morphologies are promising as 19F MRI imaging agents for use in tracking of cells and selective MRI.

Controllable synthesis of a novel magnetic core-shell nanoparticle for dual-modal imaging and pH-responsive drug delivery.

In this study, novel magnetic core-shell nanoparticles Fe3O4@La-BTC/GO have been synthesized by the layer-by-layer self-assembly (LBL) method and further modified by attachment of amino-modified PEG chains. The nanoparticles were thoroughly characterized by x-ray diffraction, FTIR, scanning electron microscopy and transmission electron microscopy. The core-shell structure was shown to be controlled by the LBL method. The drug loading of doxorubicin (DOX) within the Fe3O4@La-BTC/GO-PEG nanoparticles with different numbers of deposited layers was investigated. It was found that DOX loading increased with increasing number of metal organic framework coating layers, indicating that the drug loading can be controlled through the controllable LBL method. Cytotoxicity assays indicated that the Fe3O4@La-BTC/GO-PEG nanoparticles were biocompatible. The DOX was released rapidly at pH 3.8 and pH 5.8, but at pH 7.4 the rate and extent of release was greatly attenuated. The nanoparticles therefore demonstrate an excellent pH-triggered drug release. In addition, the particles could be tracked by magnetic resonance imaging (MRI) and fluorescence optical imaging (FOI). A clear dose-dependent contrast enhancement in T 2-weighted MR images and fluorescence images indicate the potential of these nanoparticles as dual-mode MRI/FOI contrast agents.

Functional magnetic porous silica for T 1-T 2 dual-modal magnetic resonance imaging and pH-responsive drug delivery of basic drugs.

A smart magnetic-targeting drug carrier γ-Fe2O3@p-silica comprising a γ-Fe2O3 core and porous shell has been prepared and characterized. The particles have a uniform size of about 60 nm, and a porous shell of thickness 3 nm. Abundant hydroxyl groups and a large surface area enabled the γ-Fe2O3@p-silica to be readily loaded with a large payload of the basic model drug rhodamine B (RB) (up to 73 mg g-1). Cytotoxicity assays of the γ-Fe2O3@p-silica particles indicated that the particles were biocompatible and suitable for carrying drugs. It was found that the RB was released rapidly at pH 5.5 but at pH 7.4 the rate and extent of release was greatly attenuated. The particles therefore demonstrate an excellent pH-triggered drug release. In addition, the γ-Fe2O3@p-silica particles could be tracked by magnetic resonance imaging (MRI). A clear dose-dependent contrast enhancement in both T 1-weighted and T 2-weighted MR images indicated the potential of the γ-Fe2O3@p-silica particles to act as dual-mode T 1 and T 2 MRI contrast agents.