RESUMEN
Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.
RESUMEN
The influence of the ion transfer on photoinduced electron transfer (ET) reactions was studied on the surface of hyperbranched semiconducting BiVO4 particles spontaneously adsorbed at the liquid-liquid (L/L) interface between an aqueous LiCl solution and bis(triphenylphosphoranylidene) ammonium tetrakis(pentaflurophenyl)borate (BATB) in 1,2-dichlorethane. The organic electrolyte was supplemented with [Co(bpy)3](PF6)3 to accept photoexcited electrons from BiVO4 under formation of the corresponding Co(II) complex. The L/L interface was stabilized at the orifice of a micropipette (MP) and allowed to record ion transfer cyclic voltammetry (ITCV) by applying a Galvani potential difference ∆aq/oj between two reference electrodes in the electrolyte solutions and was intermittently illuminated with visible light (l > 420 nm). The photogenerated holes caused oxidation of water to O2. Co(II) and O2 were detected at constant ∆aq/oj at an amperometric microelectrode (ME) facing the orifice of the MP in either the organic or the aqueous electrolyte. The overall current exhibits a photocurrent only in the ∆aq/oj-range, in which the IT of PF6- is kinetically limited. The amperometric detection of photogenerated products followed the same pattern as the photocurrent in the total current.
RESUMEN
Multi-principal element alloys (MPEAs) are gaining interest in corrosion and electrocatalysis research due to their electrochemical stability across a broad pH range and the design flexibility they offer. Using the equimolar CrCoNi alloy, we observe significant metal dissolution in a corrosive electrolyte (0.1â M NaCl, pHâ 2) concurrently with the oxygen evolution reaction (OER) in the transpassive region, despite the absence of hysteresis in polarization curves or other obvious corrosion indicators. We present a characterization scheme to delineate the contribution of OER and alloy dissolution, using scanning electrochemical microscopy (SECM) for OER-onset detection, and quantitative chemical analysis with inductively coupled-mass spectrometry (ICP-MS) and ultraviolet visible light (UV/Vis) spectrometry to elucidate metal dissolution processes. In situ electrochemical atomic force microscopy (EC-AFM) revealed that the transpassive metal dissolution on CrCoNi is dominated by intergranular corrosion. These results have significant implications for the stability of MPEAs in corrosion systems, emphasizing the necessity of analytically determining metal ions released from MPEA electrodes into the electrolyte when evaluating Faradaic efficiencies of OER catalysts. The release of transition metal ions not only reduces the Faradaic efficiency of electrolyzers but may also cause poisoning and degradation of membranes in electrochemical reactors.
RESUMEN
With a proper band gap of â¼2.4 eV for solar light absorption and suitable valence band edge position for oxygen evolution, scheelite-monoclinic bismuth vanadate (BiVO4) has become one of the most attractive photocatalysts for efficient visible-light-driven photoelectrochemical (PEC) water splitting. Several studies have indicated that surface modification of BiVO4 with a cocatalyst such as NiFe layered double hydroxide (LDH) can significantly increase the PEC water splitting performance of the catalyst. Herein, we experimentally investigated the charge transfer dynamics and charge carrier recombination processes by scanning electrochemical microscopy (SECM) with the feedback mode on the surface of BiVO4 and BiVO4/NiFe-LDH as model samples. The ratio of rate constants for photogenerated hole (kh+0) to electron (ke-0) via the photocatalyst of BiVO4/NiFe-LDH reacting with the redox couple is found to be five times larger than that of BiVO4 under illumination. In this case, the ratio of the rate constants kh+0/ke-0 stands for the interfacial charge recombination process. This implies the cocatalyst NiFe-LDH suppresses the electron back transfer greatly and finally reduces the surface recombination. Control experiments with cocatalysts CoPi and RuOx onto BiVO4 further verify this conclusion. Therefore, the SECM characterization allows us to make an overall analysis on the function of cocatalysts in the PEC water splitting system.
RESUMEN
We report the synthesis of a unique cubic metal-organic framework (MOF), Fe-HHTP-MOF, comprising hexahydroxytriphenylene (HHTP) supertetrahedral units and FeIII ions, arranged in a diamond topology. The MOF is synthesized under solvothermal conditions, yielding a highly crystalline, deep black powder, with crystallites of 300-500â nm size and tetrahedral morphology. Nitrogen sorption analysis indicates a highly porous material with a surface area exceeding 1400â m2 g-1 . Furthermore, Fe-HHTP-MOF shows broadband absorption from 475 up to 1900â nm with excellent absorption capability of 98.5 % of the incoming light over the visible spectral region. Electrical conductivity measurements of pressed pellets reveal a high intrinsic electrical conductivity of up to 10-3 â S cm-1 . Quantum mechanical calculations predict Fe-HHTP-MOF to be an efficient electron conductor, exhibiting continuous charge-carrier pathways throughout the structure.
RESUMEN
Chemical reduction of dioxygen in organic solvents for the production of reactive oxygen species or the concomitant oxidation of organic substrates can be enhanced by the separation of products and educts in biphasic liquid systems. Here, the coupled electron and ion transfer processes is studied as well as reagent fluxes across the liquid|liquid interface for the chemical reduction of dioxygen by decamethylferrocene (DMFc) in a dichloroethane-based organic electrolyte forming an interface with an aqueous electrolyte containing alkali metal ions. This interface is stabilized at the orifice of a pipette, across which a Galvani potential difference is externally applied and precisely adjusted to enforce the transfer of different alkali metal ions from the aqueous to the organic electrolyte. The oxygen reduction is followed by H2 O2 detection in the aqueous phase close to the interface by a microelectrode of a scanning electrochemical microscope (SECM). The results prove a strong catalytic effect of hydrated alkali metal ions on the formation rate of H2 O2 , which varies systematically with the acidity of the transferred alkali metal ions in the organic phase.
RESUMEN
Multinuclear transition metal complexes bridged by ligands with extended π-electronic systems show a variety of complex electronic transitions and electron transfer reactions. While a systematic understanding of the photochemistry and electrochemistry has been attained for binuclear complexes, much less is known about trinuclear complexes such as hexaphenyl-5,6,11,12,17,18-hexaazatrinaphthylene-tristitanocene [(Cp2 Ti)3 HATN(Ph)6 ]. The voltammogram of [(Cp2 Ti)3 HATN(Ph)6 ] shows six oxidation and three reduction waves. Solution spectra of [(Cp2 Ti)3 HATN(Ph)6 ] and of the electrochemically formed oxidation products show electronic transitions in the UV, visible and the NIR ranges. Density functional theory (DFT) and linear response time-dependent DFT show that the three formally titanium(II) centers transfer an electron to the HATN ligand in the ground state. The optically excited transitions occur exclusively between ligand-centered orbitals. The charged titanium centers only provide an electrostatic frame to the extended π-electronic system. Complete active self-consistent field (CASSCF) calculation on a structurally simplified model compound, which considers the multi-reference character imposed by the three titanium centers, can provide an interpretation of the experimentally observed temperature-dependent magnetic behavior of the different redox states of the title compound in full consistency with the interpretation of the electronic spectra.
RESUMEN
A self-assembled monolayer (SAM) on gold was prepared from a diaminoterephthalate (DAT) derivative as functional molecule and 1-decanthiol as a backfiller. The DAT derivative is N-protected by a tert-butyloxycarbonyl (Boc) group and is anchored to the gold surface via a liponic acid as a stable anchor group. The terminal DAT moiety exhibits interesting effector properties such as fluorescence and electrochemical activity. Irreversible oxidation of the monolayer at 0.4 V (Hg|Hg2SO4) in 0.1 M HClO4 triggers deprotection of the DAT group and subsequent chemical reactions, during which 10% of the DAT groups of the original SAM are transformed to a new surface-bound, quasi-reversible redox couple with a formal potential of 0.0 V (Hg|Hg2SO4) and a standard rate constant of 8 s-1 in 0.1 M HClO4. Immersion of the mixed SAM in 0.1 M HClO4 at open circuit potential or oxidation in 0.1 M H2SO4 did not produce this surface-bound redox couple. The monolayers were thoroughly characterized by X-ray photoelectron spectroscopy (XPS) and polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) after the different preparation steps indicating only minor changes in the overall composition of the monolayer, in particular, the preservation of the heteroatoms. The new redox couple is likely a diimine, in agreement with its ability to bind nucleophiles such as anilines by conjugate addition that could be followed by multicycle voltammetry and XPS. The DAT effector group is especially interesting because it can also report the binding reaction by changed electrochemical and fluorescence signals.
RESUMEN
A new preparation route is developed for the synthesis of needle-like crystals of [Au(S2 CNH2 )2 ]SCN, which avoids disproportionation of the AuI salt used as a starting material. In the crystal structure, the two crystallographically independent AuIII centers are in a square-planar environment of two S2 CNH2 ligands. The Hirshfeld surface analysis reveals the presence of noncovalent intermolecular Sâ â â S interactions, which are essential for the spatial arrangement of the molecules. Density functional theory (DFT) calculations including dispersion and damping corrections result in a unit cell volume very close to the value determined experimentally. Thermal decomposition in an inert atmosphere generates black needles with lengths of up to 500â µm. X-ray powder diffraction and pair distribution function analyses demonstrate that the needles are composed of nanosized crystals with a volume-weighted average domain size of 20(1)â nm. According to results of X-ray photoemission experiments, the black needles are covered by a nitrogen-rich carbon nitride with composition near (CN)2 N. 13 C solid-state NMR investigations indicate that two different carbon species are present, with signals corresponding well to heptazine units as in melon and triazine units as in poly(triazin imide) type compounds. Scanning transmission electron microscopy tomography evidences that the needles are composed of slightly elongated nanoparticles.
RESUMEN
A total of 35 intermetallic aluminum compounds have been synthesized from the elements via arc melting and characterized by powder X-ray diffraction. A total of 15 of them have been previously reported; however, detailed property investigations were missing. Compounds of the RETMAl2 (rare earth metal RE = Sc, Y, La-Nd, Sm, Gd-Tm, Lu) series with transition metal TM = Ni, Pd, and Pt crystallize isostructurally in the orthorhombic MgCuAl2 type structure ( Cmcm, oC16, fc2). Single-crystal X-ray diffraction investigations were conducted on YNiAl2, LaNiAl2, YPdAl2, ScPtAl2, and YPtAl2. The TM and Al atoms form a [TMAl2]δ- polyanion, the RE atoms reside in cavities within the framework. While the Sc, Y, La, and Lu compounds exhibit Pauli-paramagnetic behavior, consistent with all atoms being closed shell, the other RETMAl2 compounds show paramagnetism along with magnetic ordering at low temperatures, in line with an open-shell trivalent oxidation state for the RE atoms. Solid-state 27Al NMR investigations were carried out on the Pauli-paramagnetic samples, all showing only a single central transition, in line with one crystallographic site for the respective atoms. The observed quadrupolar coupling constants and electric-field-gradient asymmetry parameters were found to be in good agreement with the density-functional-theory-calculated values. Isotropic resonance shifts are dominated by the Fermi-contact interactions with s-conduction electron densities at the Fermi edge (Knight shifts). The bonding characteristics mirror the electronic density of states and crystal chemistry of the family of intermetallic compounds under consideration. Both the Knight shifts and quadrupolar coupling constants can be predicted based on element-specific increments.
RESUMEN
Fast recombination of electrons from semiconductors with the oxidized redox species in the electrolyte represents a major bottleneck in the improvement of ZnO-based dye-sensitized solar cells (DSSCs). While processes at the semiconductor-electrolyte interface are well studied on TiO2 electrodes, the interactions of the ZnO surface with the electrolyte solution in DSSCs are less explored. This work aims at clarifying the different impact of the two contrasting redox couples I3-/I- or [Co(bpy-pz)2]3+/2+ (bpy-pz = bis(6-(1H-pyrazol-1-yl)-2,2'-bipyridine)) in electrolytes containing either no additives or Li+ ions and/or 4-tert-butlypyridine (TBP) in DSSCs using screen-printed nanoparticulate TiO2 (NP-TiO2) or electrodeposited ZnO (ED-ZnO) photoanodes sensitized with the indoline dye DN216. A detailed photoelectrochemical study is performed to investigate light absorption, charge transfer and mass transport in these cells. We demonstrate that the chemical nature of the semiconductor directly influences the affinity of adsorbates. This drastically influences the energy levels and recombination kinetics at the semiconductor-electrolyte interface, electron and ion transport in the porous system as well as light absorption of dye molecules by the Stark effect. The present investigation reveals the origin of major performance losses in DSSCs based on ED-ZnO photoanodes as well as the relevance of ionic interactions with NP-TiO2 photoanodes that can both serve as the starting point for rationally guided improvement of their conversion efficiencies.
RESUMEN
Two bifunctional diaminoterephthalate (DAT) fluorescence dyes were prepared in a three-step sequence including one deprotection reaction. One functional unit is α-lipoic acid (ALA) for binding the dye to gold surfaces. It was introduced to the DAT scaffold by an amidation reaction. The other functional unit is a para-(trifluoromethyl)benzyl group for facile detection of the surface-bound material by X-ray photoelectron spectroscopy (XPS). This residue was introduced by reductive amination of the DAT scaffold with the respective benzaldehyde derivative. In one compound (60% yield over three steps) the ALA unit is directly bound to the DAT as a relatively electron-withdrawing amide. In solution (CH2Cl2), this material shows strong fluorescence (quantum yield 57% with emission at 495 nm, absorption maximum at 420 nm). The other compound (57% yield over three steps) possesses a propylene spacer between the ALA and the DAT units for electronic decoupling, thus, bathochromic shifts are observed (absorption at 514 nm, emission at 566 nm). The quantum yield is, however, lower (4%). Self-assembled monolayers on a gold surface of both compounds were prepared and characterized by high-resolution XPS of the C 1s, O 1s, S 2p, N 1s and F 1s emissions. The high signal-to-noise ratios of the F 1s peaks indicated that trifluoromethylation is an excellent tool for the detection of surface-bound materials by XPS.
RESUMEN
Inkjet printing (IJP) is an old but still vivifying technique for flexible and cost-effective printing of various kinds of functional inks. Normally, IJP can only work in gaseous environments. Here, it is shown that traditional piezoelectric IJP can be performed in liquid environments with a totally different droplet dispensing and manipulating mechanism. With the same piezoelectric nozzle, the volume of the droplets printed in a carrier liquid can be thousands of times smaller than those printed in air. Therefore, this work demonstrates a working mode of traditional IJP with a highly improved resolution opening possibilities for novel applications of the IJP technique.
RESUMEN
Despite their specific methodologies, all current noncontact printing techniques such as inkjet printing (IJP), involve the break-up of a liquid meniscus during the separation of the ink droplet from the bulk ink reservoir. Often, the break-up of a liquid meniscus results in the formation of one or more satellite droplet whose volumes are several orders of magnitude smaller than the primary droplet. Many attempts are directed to suppress or control the formation of satellite droplets because they blur the printing result. For the first time, a simple mechanism by which a single satellite droplet is exclusively formed and directed to the substrate by a gas stream while the primary droplet remains attached to a metal rod used for controlling the formation and break-up of the meniscus is reported. High printing resolution is demonstrated by satellite droplets printing (SDP) without the need for small orifices which are prone to clogging. Furthermore, the droplet generation from a large orifice enables SDP to handle viscous inks which has remained challenging for traditional IJP.
RESUMEN
Trinuclear titanium complexes coordinated by one ligand with three coordination sites have shown properties of mixed valency and a high number of reversible redox steps. Herein we report on the hexaphenyl-substituted derivative (Cp2Ti)3(µ3-HATNPh6) (2). On reaction of 2 with the ferrocenium salt [Cp2Fe]BF4, the cationic complexes [(Cp2Ti)3(µ3-HATNPh6)] n+ ( n = 1-3; 3-5) become available in a selective way. Cyclic voltammograms show 10 reversible redox states of the trinuclear species 2 without decomposition. In order to classify the degree of electronic communication between the titanium centers, comproportionation constants Kc, IVCT bands in NIR spectra, and magnetic measurements were analyzed. These parameters show strong coupling effects between the titanium centers but no full delocalization. In addition, single-crystal X-ray analysis of the neutral complex 2 and its oxidation products (1+ (3), 2+ (4), and 3+ (5)) revealed the geometric structure of the molecule in the solid state. For the cationic species anion-π interactions between the electron-deficient central ring of the HATNPh6 ligand and BF4- counterions were found.
RESUMEN
Small droplets can be manipulated based on controlling the adhesion work to a hydrophobic wire. The wire can be used to pick up, transport, and lay down droplets with volumes between picoliters to microliters avoiding the sliding of droplets over chip surfaces. Handling of droplets on surfaces with large steps such as engraved wells or channels is possible.
RESUMEN
The extension of the surface interrogation mode of scanning electrochemical microscopy (SI-SECM) is demonstrated for porous electrode materials. These materials are often high surface area powders which are very important electrocatalysts for instance in fuel cells or water electrolyzers. The powdered electrocatalyst material is filled into a cavity-microelectrode which is then operated as the sample electrode in SECM. After a surface oxide generation step, the oxides on the porous sample are reduced by [Ru(NH3)6]2+ formed at the microelectrode probe of the SECM while the sample is at open circuit potential. Such porous electrodes pose the difficulty to cope with unavoidable variations in the filling of the cavity and to access the entire surface by the mediator. The electrochemically active surface area is used to compensate the variation in filling. It can also be used for calculating coverages of surface oxides for a better comparison between different electrodes. We found a complete and fast accessibility for all investigated porous electrodes which is based on electron transfer. Therefore, we propose a "vertical feedback" mechanism analogous to SECM feedback experiments on extended flat samples at open circuit potential. Moreover, the current transients indicate that distinctive oxide species with different kinetics are present. Taken together, these measures ensure consistent determination of oxide coverages for nanoporous gold and carbon-supported platinum nanoparticles.
RESUMEN
Li-oxygen batteries with organic electrolytes are of general interest because of their theoretically high gravimetric energy density. Among the great challenges for this storage technology is the generation of reactive oxygen species such as superoxides and peroxides that may react with the organic solvent molecules and other cell components. The generation of such species has been assumed to occur during the charging reaction. Here we show that superoxide is formed also during the discharge reaction in lithium ion-containing dimethyl sulfoxide electrolytes and is released into the solution. This is shown independently by fluorescence microscopy after reaction with the selective reagent 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole and by local detection using a microelectrode of a scanning electrochemcial microscope positioned in a defined distance of 10 to 90 µm above the gas diffusion electrode.
RESUMEN
Nanoscale pH evaluation is a prerequisite for understanding the processes and phenomena occurring at solid-liquid, liquid-liquid, and liquid-gas interfaces, e.g., heterogeneous catalysis, extraction, partitioning, and corrosion. Research on the homogeneous processes within small volumes such as intracellular fluids, microdroplets, and microfluidic chips also requires nanometer scale pH assessment. Due to the opacity of numerous systems, optical methods are useless and, if applicable, require addition of a pH-sensitive dye. Potentiometric probes suffer from many drawbacks such as potential drift and lack of selectivity. Here, we present a voltammetric nanosensor for reliable pH assessment between pH 2 and 12 with high spatial resolution. It consists of a pyrolytic carbon nanoelectrode obtained by chemical vapor deposition (CVD) inside a quartz nanopipette. The carbon is modified by adsorption of syringaldazine from its ethanolic solution. It exhibits a stable quasi-reversible cyclic voltammogram with nearly Nernstian dependency of midpeak potentials (-54 mV/pH). This sensor was applied as a probe for scanning electrochemical microscopy (SECM) in order to map pH over a platinum ultramicroelectrode (UME), generating hydroxide ions (OH(-)) by the oxygen reduction reaction (ORR) at a diffusion-controlled rate in aerated phosphate buffered saline (PBS). The results reveal the alkalization of the electrolyte close to the oxygen reducing electrode, showing the insufficient buffer capacity of PBS to maintain a stable pH at the given conditions.
RESUMEN
Scanning electrochemical microscopy with soft microelectrode array probes has recently been used to enable reactivity imaging of extended areas and to compensate sample corrugation perpendicular to the scanning direction. Here, the use of a new type of microelectrode arrays is described in which each individual microelectrode can independently compensate corrugations of the sample surface. It consists of conventional Pt microelectrodes enclosed in an insulating glass sheath. The microelectrodes are individually fixed to a new holder system by magnetic forces. The concept was tested using a large 3D sample with heights up to 12 µm specially prepared by inkjet printing. The microelectrodes follow the topography in a constant working distance independently from each other while exerting low pressure on the surface.