Mastering the surface strain of platinum catalysts for efficient electrocatalysis.

Platinum (Pt) has found wide use as an electrocatalyst for sustainable energy conversion systems1-3. The activity of Pt is controlled by its electronic structure (typically, the d-band centre), which depends sensitively on lattice strain4,5. This dependence can be exploited for catalyst design4,6-8, and the use of core-shell structures and elastic substrates has resulted in strain-engineered Pt catalysts with drastically improved electrocatalytic performances7,9-13. However, it is challenging to map in detail the strain-activity correlations in Pt-catalysed conversions, which can involve a number of distinct processes, and to identify the optimal strain modification for specific reactions. Here we show that when ultrathin Pt shells are deposited on palladium-based nanocubes, expansion and shrinkage of the nanocubes through phosphorization and dephosphorization induces strain in the Pt(100) lattice that can be adjusted from -5.1 per cent to 5.9 per cent. We use this strain control to tune the electrocatalytic activity of the Pt shells over a wide range, finding that the strain-activity correlation for the methanol oxidation reaction and hydrogen evolution reaction follows an M-shaped curve and a volcano-shaped curve, respectively. We anticipate that our approach can be used to screen out lattice strain that will optimize the performance of Pt catalysts-and potentially other metal catalysts-for a wide range of reactions.

Corrosion Dynamics of Carbon-Supported Platinum Electrocatalysts with Metal-Carbon Interactions Revealed by In Situ Liquid Transmission Electron Microscopy.

Carbon support is essential for electrocatalysis, but limitations remain, as carbon corrosion can lead to electrocatalyst degradation and affect the long-term durability of electrocatalysts. Here, we studied the corrosion dynamics of carbon nanotubes (CNTs) and Vulcan carbon (VC) together with platinum (Pt) nanoparticles in real time by liquid cell (LC) transmission electron microscopy (TEM). The results showed that CNTs with a high degree of graphitization exhibited higher corrosion resistance compared to VC. Furthermore, we observed that the main degradation path of Pt nanoparticles in Pt/CNTs was ripening, while in Pt/VC, it was aggregation and coalescence, which was dominated by the interactions between Pt nanoparticles and different hybridization of carbon supports. Finally, we performed an ex situ CV stability test to confirm the conclusions obtained from in situ experiments. This work provides deep insights into the corrosion mechanism of carbon-supported electrocatalysts to optimize the design of electrocatalysts with a higher durability.

Reconstruction of High Entropy Alloys on a Metal-Organic Framework Approaching Active Oxygen Reduction Electrocatalysts.

High-entropy alloys (HEAs) have garnered considerable attention as promising nanocatalysts for effectively utilizing Pt in catalysis toward oxygen reduction reactions due to their unique properties. Nonetheless, there is a relative dearth of attention regarding the structural evolution of HEAs in response to electrochemical conditions. In this work, we propose a thermal reduction method to synthesize high entropy nanoparticles by leveraging the confinement effect and abundant nitrogen-anchored sites provided by pyrolyzed metal-organic frameworks (MOFs). Notably, the prepared catalysts exhibit enhanced activity accompanied by structural reconstruction during electrochemical activation, approaching 1 order of magnitude higher mass activity compared to Pt/C in oxygen reduction. Atomic-scale structural characterization reveals that abundant defects and single atoms are formed during the activation process, contributing to a significant boost in the catalytic performance for oxygen reduction reactions. This study provides deep insights into surface reconstruction engineering during electrochemical operations, with practical implications for fuel cell applications.

Unique Perovskitizer N─Pb Bond Switching Induced Polar Photovoltaic Effect in Trilayered Hybrid Perovskite.

Polar photovoltaic effect (PPE) has attracted great attention in regulating desired optoelectronic properties, which can be driven by order-disorder and displacive phase transitions. Bond-switching is also a feasible method to induce PPE, but such investigation is very rare. Lead-halide hybrid perovskite (LHHP) is an outstanding photodetection material; lead atoms possess rich coordination modes to provide possibilities to construct switchable bonds. Here, a unique perovskitizer N─Pb bond-switching is disclosed to induce polar photovoltage in the emerging LHHP, PA2MHy2Pb3Br10 (1, PA = n-propylamine, MHy = methylhydrazine). Interestingly, the perovskitizer MHy+ provides 2s2 lone pair while the Pb atom affords empty d orbitals, which coordinate with each other to generate a flexible N─Pb bond. Further, the introduction of N─Pb bonds results in a high distortion of the PbBr6 octahedron to form local polarity and further orientation to induce spontaneous polarization. More importantly, such a flexible N─Pb bond switching mechanism drives a notable PPE and controllable polarized photo-response, a polarization ratio up to 9.7 at the polar phase in striking contrast with the non-polar phase (1.03). The work provides the first demonstration of bond-switching to induce polar phase transition and polar photovoltage in the photoconductive hybrid perovskites for photoelectric applications.

Chiral-Achiral Cations Intercalation Induced Lead-Free Chiral-Polar Hybrid Perovskites Enable Self-Powered X-Ray and Ultraviolet-Visible-Near-Infrared Photo Detection.

Lead halide hybrid perovskites have made great progress in direct X-ray detection and broadband photodetection, but the existence of toxic Pb and the demand for external operating voltage have severely limited their further applications and operational stability improvements. Therefore, exploring "green" lead-free hybrid perovskite that can both achieve X-ray detection and broadband photodetection without external voltage is of great importance, but remains severely challenging. Herein, using centrosymmetric (BZA)3BiI6 (1, BZA = benzylamine) as a template, a pair of chiral-polar lead-free perovskites, (BZA)2(R/S-PPA)BiI6 (2-R/S, R/S-PPA = (R/S)-1-Phenylpropylamine) are successfully obtained by introducing chiral aryl cations of (R/S)-1-Phenylpropylamine. Compared to 1, chiral-polar 2-R presents a significant irradiation-responsive bulk photovoltaic effect (BPVE) with an open circuit photovoltage of 0.4 V, which enables it with self-powered X-ray, UV-vis-NIR broadband photodetection. Specifically, 2-R device exhibits an ultralow detection limit of 18.5 nGy s-1 and excellent operational stability. Furthermore, 2-R as the first lead-free perovskite achieves significant broad-spectrum (377-940 nm) photodetection via light-induced pyroelectric effect. This work sheds light on the rational crystal reconstruction engineering and design of "green" hybrid perovskite toward high-demanded self-powered radiation detection and broadband photodetection.

Dion-Jacobson Type Lead-Free Double Perovskite with Ultra-Narrow Aromatic Interlayer Spacing for Highly Sensitive and Stable X-ray Detection.

The low-toxic and environmentally friendly 2D lead-free perovskite has made significant progress in the exploration of "green" X-ray detectors. However, the gap in detection performance between them and their lead-based analogues remains a matter of concern that cannot be ignored. To reduce this gap, shortening the interlayer spacing to accelerate the migration and collection of X-ray carriers is a promising strategy. Herein, a Dion-Jacobson (DJ) lead-free double perovskite (4-AP)2AgBiBr8 (1, 4-AP = 4-amidinopyridine) with an ultra-narrow interlayer spacing of 3.0 Å, is constructed by utilizing π-conjugated aromatic spacers. Strikingly, the subsequent enhanced carrier transport and increased crystal density lead to X-ray detectors based on bulk single crystals of 1 with a high sensitivity of 1117.3 µC Gy-1 cm-2, superior to the vast majority of similar double perovskites. In particular, the tight connection of the inorganic layers by the divalent cations enhances structural rigidity and stability, further endowing 1 detector with ultralow dark current drift (3.06 × 10-8 nA cm-1 s-1 V-1, 80 V), excellent multiple cycles switching X-ray irradiation stability, as well as long-term environmental stability (maintains over 94% photoresponse after 90 days). This work brings lead-free double perovskites one step closer to realizing efficient practical green applications.

Association between diabetes mellitus and primary restenosis following endovascular treatment: a comprehensive meta-analysis of randomized controlled trials.

IMPORTANCE: Diabetes mellitus (DM) is thought to be closely related to arterial stenotic or occlusive disease caused by atherosclerosis. However, there is still no definitive clinical evidence to confirm that patients with diabetes have a higher risk of restenosis. OBJECTIVE: This meta-analysis was conducted to determine the effect of DM on restenosis among patients undergoing endovascular treatment, such as percutaneous transluminal angioplasty (PTA) or stenting. DATA SOURCES AND STUDY SELECTION: The PubMed/Medline, EMBASE and Cochrane Library electronic databases were searched from 01/1990 to 12/2022, without language restrictions. Trials were included if they satisfied the following eligibility criteria: (1) RCTs of patients with or without DM; (2) lesions confined to the coronary arteries or femoral popliteal artery; (3) endovascular treatment via PTA or stenting; and (4) an outcome of restenosis at the target lesion site. The exclusion criteria included the following: (1) greater than 20% of patients lost to follow-up and (2) a secondary restenosis operation. DATA EXTRACTION AND SYNTHESIS: Two researchers independently screened the titles and abstracts for relevance, obtained full texts of potentially eligible studies, and assessed suitability based on inclusion and exclusion criteria.. Disagreements were resolved through consultation with a third researcher. Treatment effects were measured by relative ratios (RRs) with 95% confidence intervals (CIs) using random effects models. The quality of the evidence was assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) criteria. MAIN OUTCOMES AND MEASURES: The main observation endpoint was restenosis, including > 50% stenosis at angiography, or TLR of the primary operation lesion during the follow-up period. RESULTS: A total of 31,066 patients from 20 RCTs were included. Patients with DM had a higher risk of primary restenosis after endovascular treatment (RR = 1.43, 95% CI: 1.25-1.62; p = 0.001). CONCLUSIONS AND RELEVANCE: This meta-analysis of all currently available RCTs showed that patients with DM are more prone to primary restenosis after endovascular treatment.

Design, synthesis and evaluation of thieno[3,2-d]pyrimidine derivatives as novel potent CDK7 inhibitors.

The targeting of cyclin-dependent kinase 7 (CDK7) has become a highly desirable therapeutic approach in the field of oncology due to its dual role in regulating essential biological processes, encompassing cell cycle progression and transcriptional control. We have previously identified a highly selective thieno[3,2-d]pyrimidine-based CDK7 inhibitor with demonstrated efficacy and safety in animal model. In this study, we sought to optimize the thieno[3,2-d]pyrimidine core to discover a novel series of CDK7 inhibitors with improved potency and pharmacokinetic (PK) properties. Through extensive structure-activity relationship (SAR) studies, compound 20 has emerged as the lead candidate due to its potent inhibitory activity against CDK7 and remarkable efficacy on MDA-MB-453 cells, a representative triple negative breast cancer (TNBC) cell line. Furthermore, 20 has demonstrated favorable oral bioavailability and exhibited highly desirable pharmacokinetic (PK) properties, making it a promising lead candidate for further structural optimization.

MicroRNA regulation of phenotypic transformations in vascular smooth muscle: relevance to vascular remodeling.

Alterations in the vascular smooth muscle cells (VSMC) phenotype play a critical role in the pathogenesis of several cardiovascular diseases, including hypertension, atherosclerosis, and restenosis after angioplasty. MicroRNAs (miRNAs) are a class of endogenous noncoding RNAs (approximately 19-25 nucleotides in length) that function as regulators in various physiological and pathophysiological events. Recent studies have suggested that aberrant miRNAs' expression might underlie VSMC phenotypic transformation, appearing to regulate the phenotypic transformations of VSMCs by targeting specific genes that either participate in the maintenance of the contractile phenotype or contribute to the transformation to alternate phenotypes, and affecting atherosclerosis, hypertension, and coronary artery disease by altering VSMC proliferation, migration, differentiation, inflammation, calcification, oxidative stress, and apoptosis, suggesting an important regulatory role in vascular remodeling for maintaining vascular homeostasis. This review outlines recent progress in the discovery of miRNAs and elucidation of their mechanisms of action and functions in VSMC phenotypic regulation. Importantly, as the literature supports roles for miRNAs in modulating vascular remodeling and for maintaining vascular homeostasis, this area of research will likely provide new insights into clinical diagnosis and prognosis and ultimately facilitate the identification of novel therapeutic targets.

Effects of positive end-expiratory pressure on regional cerebral oxygen saturation in elderly patients undergoing thoracic surgery during one-lung ventilation: a randomized crossover-controlled trial.

BACKGROUND: A significant reduction in regional cerebral oxygen saturation (rSO2) is commonly observed during one-lung ventilation (OLV), while positive end-expiratory pressure (PEEP) can improve oxygenation. We compared the effects of three different PEEP levels on rSO2, pulmonary oxygenation, and hemodynamics during OLV. METHODS: Forty-three elderly patients who underwent thoracoscopic lobectomy were randomly assigned to one of six PEEP combinations which used a crossover design of 3 levels of PEEP-0 cmH2O, 5 cmH2O, and 10 cmH2O. The primary endpoint was rSO2 in patients receiving OLV 20 min after adjusting the PEEP. The secondary outcomes included hemodynamic and respiratory variables. RESULTS: After exclusion, thirty-six patients (36.11% female; age range: 60-76 year) were assigned to six groups (n = 6 in each group). The rSO2 was highest at OLV(0) than at OLV(10) (difference, 2.889%; [95% CI, 0.573 to 5.204%]; p = 0.008). Arterial oxygen partial pressure (PaO2) was lowest at OLV(0) compared with OLV(5) (difference, -62.639 mmHg; [95% CI, -106.170 to -19.108 mmHg]; p = 0.005) or OLV(10) (difference, -73.389 mmHg; [95% CI, -117.852 to -28.925 mmHg]; p = 0.001), while peak airway pressure (Ppeak) was lower at OLV(0) (difference, -4.222 mmHg; [95% CI, -5.140 to -3.304 mmHg]; p < 0.001) and OLV(5) (difference, -3.139 mmHg; [95% CI, -4.110 to -2.167 mmHg]; p < 0.001) than at OLV(10). CONCLUSIONS: PEEP with 10 cmH2O makes rSO2 decrease compared with 0 cmH2O. Applying PEEP with 5 cmH2O during OLV in elderly patients can improve oxygenation and maintain high rSO2 levels, without significantly increasing peak airway pressure compared to not using PEEP. TRIAL REGISTRATION: Chinese Clinical Trial Registry ChiCTR2200060112 on 19 May 2022.

Bioinformatic Analysis Identifies Potential Extracellular Matrix Related Genes in the Pathogenesis of Early Onset Preeclampsia.

Early-onset preeclampsia (EOPE) is a complex pregnancy complication that poses significant risks to the health of both mothers and fetuses, and research on its pathogenesis and pathophysiology remains insuffcient. This study aims to explore the role of candidate genes and their potential interaction mechanisms in EOPE through bioinformatics analysis techniques. Two gene expression datasets, GSE44711 and GSE74341, were obtained from the Gene Expression Omnibus (GEO) to identify differentially expressed genes (DEGs) between EOPE and gestational age-matched preterm control samples. Functional enrichment analysis was performed utilizing the kyoto encyclopedia of genes and genomes (KEGG), gene ontology (GO), and gene set enrichment analysis (GSEA). A protein-protein interaction (PPI) network was constructed using the STRING database, and hub DEGs were identified through Cytoscape software and comparative toxicogenomics database (CTD) analysis. Furthermore, a diagnostic logistic model was established using these hub genes, which were confirmed through reverse transcription polymerase chain reaction (RT-PCR). Finally, immune cell infiltration was analyzed using CIBERSORT. In total, 807 DEGs were identified in the GSE44711 dataset (451 upregulated genes and 356 downregulated genes), and 787 DEGs were identified in the GSE74341 dataset (446 upregulated genes and 341 downregulated genes). These DEGs were significantly enriched in various molecular functions such as extracellular matrix structural constituent, receptor-ligand activity binding, cytokine activity, and platelet-derived growth factor. KEGG and GSEA annotation revealed significant enrichment in pathways related to ECM-receptor interaction, PI3K-AKT signaling, and focal adhesion. Ten hub genes were identified through the CytoHubba plugin in Cytoscape. Among these hub genes, three key DEGs (COL1A1, SPP1, and THY1) were selected using CTD analysis and various topological methods in Cytoscape. The diagnostic logistic model based on these three genes exhibited high efficiency in predicting EOPE (AUC = 0.922). RT-PCR analysis confirmed the downregulation of these genes in EOPE, and immune cell infiltration analysis suggested the significant role of M1 and M2 macrophages in EOPE. In conclusion, this study highlights the association of three key genes (COL1A1, SPP1, and THY1) with EOPE and their contribution to high diagnostic efficiency in the logistic model. Additionally, it provides new insights for future research on EOPE and emphasizes the diagnostic value of these identified genes. More research is needed to explore their functional and diagnostic significance in EOPE.

Detecting of Barely Visible Impact Damage on Carbon Fiber Reinforced Polymer Using Diffusion Ultrasonic Improved by Time-Frequency Domain Disturbance Sensitive Zone.

Based on the decorrelation calculation of diffusion ultrasound in time-frequency domain, this paper discusses the repeatability and potential significance of Disturbance Sensitive Zone (DSZ) in time-frequency domain. The experimental study of Barely Visible Impact Damage (BVID) on Carbon Fiber Reinforced Polymer (CFRP) is carried out. The decorrelation coefficients of time, frequency, and time-frequency domains and DSZ are calculated and compared. It has been observed that the sensitivity of the scattered wave disturbance caused by impact damage is non-uniformly distributed in both the time and frequency domains. This is evident from the non-uniform distribution of the decorrelation coefficient in time-domain and frequency-domain decorrelation calculations. Further, the decorrelation calculation in the time-frequency domain can show the distribution of the sensitivity of the scattered wave disturbance in the time domain and frequency domain. The decorrelation coefficients in time, frequency, and time-frequency domains increase monotonically with the number of impacts. In addition, in the time-frequency domain decorrelation calculation results, stable and repetitive DSZ are observed, which means that the specific frequency component of the scattered wave is extremely sensitive to the damage evolution of the impact region at a specific time. Finally, the DSZ obtained from the first 15 impacts is used to improve the decorrelation calculation in the 16-th to 20-th impact. The results show that the increment rate of the improved decorrelation coefficient is 10.22%. This study reveals that the diffusion ultrasonic decorrelation calculation improved by DSZ makes it feasible to evaluate early-stage damage caused by BVID.

Enhancing Ni/Co Activity by Neighboring Pt Atoms in NiCoP/MXene Electrocatalyst for Alkaline Hydrogen Evolution.

Density functional theory (DFT) calculations demonstrate neighboring Pt atoms can enhance the metal activity of NiCoP for hydrogen evolution reaction (HER). However, it remains a great challenge to link Pt and NiCoP. Herein, we introduced curvature of bowl-like structure to construct Pt/NiCoP interface by adding a minimal 1 ‰-molar-ratio Pt. The as-prepared sample only requires an overpotential of 26.5 and 181.6 mV to accordingly achieve the current density of 10 and 500 mA cm-2 in 1 M KOH. The water dissociation energy barrier (Ea) has a ~43 % decrease compared with NiCoP counterpart. It also shows an ultrahigh stability with a small degradation rate of 10.6 µV h-1 at harsh conditions (500 mA cm-2 and 50 °C) after 3000 hrs. X-ray photoelectron spectroscopy (XPS), soft X-ray absorption spectroscopy (sXAS), and X-ray absorption fine structure (XAFS) verify the interface electron transfer lowers the valence state of Co/Ni and activates them. DFT calculations also confirm the catalytic transition step of NiCoP can change from Heyrovsky (2.71 eV) to Tafel step (0.51 eV) in the neighborhood of Pt, in accord with the result of the improved Hads at the interface disclosed by in situ electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) tests.

Multi-axial Self-driven X-ray Detection by a Two-dimensional Biaxial Hybrid Organic-Inorganic Perovskite Ferroelectric.

Metal halide perovskite ferroelectrics combining spontaneous polarization and excellent semiconducting properties is an ideal platform for enabling self-driven X-ray detection, however, achievements to date have been only based on uniaxiality, which increases the complexity of device fabrication. Multi-axial ferroelectric materials have multiple equivalent polarization directions, making them potentially amenable to multi-axial self-driven X-ray detection, but the report on these types of materials is still a huge blank. Herein, a high-quality (BA)2(EA)2Pb3I10 (1) biaxial ferroelectric single crystal was successfully grown, which exhibited significant spontaneous polarization along the c-axis and b-axis. Under X-ray irradiation, bulk photovoltaic effect (BPVE) was exhibited along both the c-axis and b-axis, with open circuit voltages (Voc) of 0.23 V and 0.22 V, respectively. Then, the BPVE revealed along the inversion of polarized direction with the polarized electric fields. Intriguingly, due to the BPVE of 1, 1 achieved multi-axial self-driven X-ray detection for the first time (c-axis and b-axis) with relatively high sensitivities and ultralow detection limits (17.2 nGyair s-1 and 19.4 nGyair s-1, respectively). This work provides a reference for the subsequent use of multi-axial ferroelectricity for multi-axial self-driven optoelectronic detection.

Circularly Polarized Light-Dependent Pyro-Phototronic Effect from 2D Chiral-Polar Double Perovskites.

Chiral hybrid perovskites combine the advantages of chiral materials and halide perovskites, offering an ideal platform for the design of circularly polarized light (CPL) detectors. The pyro-phototronic effect, as a special mechanism of the photoexcited pyroelectric signal, can significantly improve the performance of photodetectors, whereas it remains a great challenge to achieve pyroelectricity-based CPL detection. In this work, the chiroptical phenomena and the pyro-phototronic effect are combined in chiral-polar perovskites to achieve unprecedented pyroelectric-based CPL detection. Two novel two-dimensional (2D) lead-free chiral-polar double perovskites, S/R-[(4-aminophenyl)ethylamine]2AgBiI8·0.5H2O, are successfully designed and synthesized by introducing chiral organic ligands into metal halide frameworks. Strikingly, the photoresponse is substantially boosted with the support of the pyro-phototronic effect, showing an increased pyro-phototronic current that is 40 times greater than the photovoltaic current. Furthermore, the pyroelectric-based detector possesses excellent CPL detection capacity to distinguish different polarization states of CPL photons, which achieve an impressive glph of up to 0.27 at zero bias. This study provides a brand new process for CPL detection by utilizing the pyro-phototronic effect in chiral-polar perovskites, which opens a new avenue for chiral materials in optoelectronic applications.

RNA kinase CLP1/Cbc regulates meiosis initiation in spermatogenesis.

CLP1, TSEN complex, and VCP are evolutionarily conserved proteins whose mutations are associated with neurodegenerative diseases. In this study, we have found that they are also involved in germline differentiation. To optimize both quantity and quality in gametes production, germ cells expand themselves through limited mitotic cycles prior to meiosis. Stemming from our previous findings on the correlation between mRNA 3'-processing and meiosis entry, here we identify that the RNA kinase Cbc, the Drosophila member of the highly conserved CLP1 family, is a component of the program regulating the transition from mitosis to meiosis. Using genetic manipulations in Drosophila testis, we demonstrate that nuclear Cbc is required to promote meiosis entry. Combining biochemical and genetic methods, we reveal that Cbc physically and/or genetically intersects with Tsen54 and TER94 (VCP ortholog) in this process. The C-terminal half of Tsen54 is both necessary and sufficient for its binding with Cbc. Further, we illustrate the functional conservation between Cbc and mammalian CLP1 in the assays of subcellular localization and Drosophila fertility. As CLP1, TSEN complex, and VCP have also been identified in neurodegenerations of animal models, a mechanism involving these factors seems to be shared in gametogenesis and neurogenesis.

Nanoscale Design for High Entropy Alloy Electrocatalysts.

Due to their distinctive physical and chemical characteristics, high entropy alloys (HEAs), a class of alloys comprising multiple elements, have garnered a lot of attention. It is demonstrated recently that HEA electrocatalysts increase the activity and stability of several processes. In this paper, the most recent developments in HEA electrocatalysts research are reviewed, and the performance of HEAs in catalyzing key reactions in water electrolysis and fuel cells is summarized. In addition, the design strategies for HEA electrocatalysts optimization is introduced, which include component selection, size optimization, morphology control, structural engineering, crystal phase regulation, and theoretical prediction, which can guide component selection and structural design of HEA electrocatalysts.

Realization of Passive X-Ray Detection with a Low Detection Limit in Dion-Jacobson Halide Hybrid Perovskite.

Halide hybrid perovskites are a kind of intriguing contenders for X-ray detection, and their low detection limits (LoDs) have played a crucial part in X-ray safety inspection and medical examination. However, there is still a significant challenge in manufacturing perovskite X-ray detectors with low LoDs. Herein, attributed to the bulk photovoltaic effect (BPVE) of a Dion-Jacobson (DJ) type 2D halide hybrid perovskite polar structure (3-methylaminopropylamine)PbBr4 (1), self-powered X-ray detection with low detection limit is successfully realized. Specifically, the crystal-based detector of 1 exhibits a low dark current at zero bias, which reduces the noise current (0.34 pA), leading to a low detection limit (58.3 nGyair s-1 ) which is two orders of magnitude lower than that of under external voltage bias. The combination of BPVE and LoDs of halide hybrid perovskite provides an efficient strategy to achieve passive X-ray detection with low doses.

Low Detection Limit Circularly Polarized Light Detection Realized by Constructing Chiral Perovskite/Si Heterostructures.

Chiral perovskites have been demonstrated as promising candidates for direct circularly polarized light (CPL) detection due to their intrinsic chirality and excellent charge transport ability. However, chiral perovskite-based CPL detectors with both high distinguishability of left- and right-handed optical signals and low detection limit remain unexplored. Here, a heterostructure, (R-MPA)2 MAPb2 I7 /Si (MPA = methylphenethylamine, MA = methylammonium) is constructed, to achieve high-sensitive and low-limit CPL detection. The heterostructures with high crystalline quality and sharp interface exhibit a strong built-in electric field and a suppressed dark current, not only improving the separation and transport of the photogenerated carriers but also laying a foundation for weak CPL signals detection. Consequently, the heterostructure-based CPL detector obtains a high anisotropy factor up to 0.34 with a remarkably low CPL detection limit of 890 nW cm-2 under the self-driven mode. As a pioneering study, this work paves the way for designing high-sensitive CPL detectors that simultaneously have great distinguishing capability and low detection limit of CPL.

Characterization of cross-reactive monoclonal antibodies against SARS-CoV-1 and SARS-CoV-2: Implication for rational design and development of pan-sarbecovirus vaccines and neutralizing antibodies.

Emergence of various circulating SARS-CoV-2 variants of concern (VOCs) promotes the identification of pan-sarbecovirus vaccines and broadly neutralizing antibodies (bNAbs). Here, to characterize monoclonal antibodies cross-reactive against both SARS-CoV-1 and SARS-CoV-2 and to search the criterion for bNAbs against all emerging SARS-CoV-2, we isolated several SARS-CoV-1-cross-reactive monoclonal antibodies (mAbs) from a wildtype SARS-CoV-2 convalescent donor. These antibodies showed broad binding capacity and cross-neutralizing potency against various SARS-CoV-2 VOCs, including B.1.1.7 (Alpha), B.1.351 (Beta), P.1 (Gamma), and B.1.617.2 (Delta), but failed to efficiently neutralize Omicron variant and its sublineages. Structural analysis revealed how Omicron sublineages, but not other VOCs, efficiently evade an antibody family cross-reactive against SARS-CoV-1 through their escape mutations. Further evaluation of a series of SARS-CoV-1/2-cross-reactive bNAbs showed a negative correlation between the neutralizing activities against SARS-CoV-1 and SARS-CoV-2 Omicron variant. Together, these results suggest the necessity of using cross-neutralization against SARS-CoV-1 and SARS-CoV-2 Omicron as criteria for rational design and development of potent pan-sarbecovirus vaccines and bNAbs.