RESUMEN
The heart is an autoimmune-prone organ. It is crucial for the heart to keep injury-induced autoimmunity in check to avoid autoimmune-mediated inflammatory disease. However, little is known about how injury-induced autoimmunity is constrained in hearts. Here, we reveal an unknown intramyocardial immunosuppressive program driven by Tbx1, a DiGeorge syndrome disease gene that encodes a T-box transcription factor (TF). We found induced profound lymphangiogenic and immunomodulatory gene expression changes in lymphatic endothelial cells (LECs) after myocardial infarction (MI). The activated LECs penetrated the infarcted area and functioned as intramyocardial immune hubs to increase the numbers of tolerogenic dendritic cells (tDCs) and regulatory T (Treg) cells through the chemokine Ccl21 and integrin Icam1, thereby inhibiting the expansion of autoreactive CD8+ T cells and promoting reparative macrophage expansion to facilitate post-MI repair. Mimicking its timing and implementation may be an additional approach to treating autoimmunity-mediated cardiac diseases.
RESUMEN
OBJECTIVE: Cephalic Index (CI), the ratio of head width to length, is one of the indexes reflecting cranial morphological characteristics. Current norms were established by European and American countries. The purpose of the study was to study anthropometry of cranial parameters using computed tomography scans to establish the CI of the sampled Chinese Children. METHODS: The cross-sectional study was carried out on patients of age younger than 14 years old at Shanghai Children's Medical Center. The measurement of maximum cranial breadth and maximum cranial length were taken on a computed tomography scan machine and recorded for analysis. Cephalic Index was calculated for each age and sex group and compared with previously established norms. RESULTS: Five hundred eighteen patients met the inclusion criteria, including 301 males and 217 females. The means for boys and girls were 87.1 (SD: 4.3) and 85.8 (SD: 4.3), respectively. There was a significant difference between boys and girls (P < 0.01). Cephalic Index in different ages and on applying the 1-way analysis of variance association was statistically insignificant (P = 0.19). CONCLUSIONS: Chinese head shape was brachycephalic. A statistically significant correlation was seen between the CI and sex, while not age.
RESUMEN
INTRODUCTION: In invisible orthodontics, attachments are used with aligners to better control tooth movement. However, to what extent the geometry of the attachment can affect the biomechanical properties of the aligner is unknown. This study aimed to determine the biomechanical effect of attachment geometry on orthodontic force and moment using 3-dimensional finite element analysis. METHODS: A 3-dimensional model of mandibular teeth, periodontal ligaments, and the bone complex was employed. Rectangular attachments with systematic size variations were applied to the model with corresponding aligners. Fifteen pairs were created to move the lateral incisor, canine, first premolar, and second molar mesially for 0.15 mm, respectively. The resulting orthodontic forces and moments were analyzed to compare the effect of attachment size. RESULTS: Expansion in the attachment size showed a continuous increase in force and moment. Considering the attachment size, the moment increased more than the force, resulting in a slightly higher moment-to-force ratio. Expanding the length, width, or thickness of the rectangular attachment by 0.50 mm increases the force and moment up to 23 cN and 244 cN-mm, respectively. The force direction was closer to the desired movement direction with larger attachment sizes. CONCLUSIONS: Based on the experimental results, the constructed model successfully simulates the effect of the size of attachments. The larger the size of the attachment, the greater the force and moment, and the better the force direction. The appropriate force and moment for a particular clinical patient can be obtained by choosing the right attachment size.
Asunto(s)
Fenómenos Mecánicos , Diseño de Aparato Ortodóncico , Estrés Mecánico , Ligamento Periodontal , Incisivo , Técnicas de Movimiento Dental/métodos , Análisis de Elementos FinitosRESUMEN
Ultrasound guided percutaneous interventional therapy has been widely used in clinic. Aiming at the problem of soft tissue deformation caused by probe contact force in robot-assisted ultrasound-guided therapy, a real-time non-reference ultrasound image evaluation method considering soft tissue deformation is proposed. On the basis of ultrasound image brightness and sharpness, a multi-dimensional ultrasound image evaluation index was designed, which incorporated the aggregation characteristics of the organization. In order to verify the effectiveness of the proposed method, ultrasound images of four different models were collected for experiments, including prostate phantom, phantom with cyst, pig liver tissue, and pig liver tissue with cyst. In addition, the correlation between subjective and objective evaluations was analyzed based on Spearman's rank correlation coefficient. Experimental results showed that the average evaluation time of a single image was 68.8 milliseconds. The evaluation time could satisfy real-time applications. The proposed method realizes the effective evaluation of real-time ultrasound image quality in robot-assisted therapy, and has good consistency with the evaluation of supervisors.
Asunto(s)
Quistes , Animales , Masculino , Fantasmas de Imagen , Porcinos , Ultrasonografía/métodosRESUMEN
OBJECTIVE: This study aims to assess the impact of early diagnosis and surgery on children with congenital dermal sinus, investigate the relationship between MRI findings and extent of surgical exploration, and summarize our clinical experience with the surgical management in cases with central nervous system (CNS) infection. METHODS: The skin features, preoperative MRI images, intraoperative findings, postoperative pathological characteristics, and prognoses of 56 children with congenital dermal sinus were analyzed retrospectively. RESULTS: All the children had a pinpoint ostium in the skin, and 52 out of the 56 children (92.9%) had intraspinal dermoid cysts or epidermoid cysts. Before surgery, MRI did not show intraspinal lesions in 13 children, and surgery revealed intradural lesions in 9 of these children (69.2%). Among 46 children without CNS infection, 16 children had neurological impairment before surgery. After surgery, recovery was complete in 36 children, partial in 9 children, and absent in 3 children. All children with CNS infection had neurological impairment before surgery. After surgery, the condition improved in 8 children and exacerbated in 2 children. Children without CNS infection had statistically significantly better prognosis than children with CNS infection (p = 0.03). CONCLUSION: A pinpoint ostium in the dorsal midline is the characteristic feature of congenital dermal sinus. In cases without intraspinal lesions on MRI, the spinal canal should be explored intraoperatively to ensure complete removal of the lesion and prevent recurrences. In cases without CNS infection, early diagnosis and timely surgery are beneficial to the recovery of nerve function.
Asunto(s)
Quiste Dermoide , Quiste Epidérmico , Espina Bífida Oculta , Niño , Quiste Dermoide/diagnóstico por imagen , Quiste Dermoide/cirugía , Humanos , Imagen por Resonancia Magnética , Recurrencia Local de Neoplasia , Estudios Retrospectivos , Espina Bífida Oculta/diagnóstico por imagen , Espina Bífida Oculta/cirugíaRESUMEN
Complete three-dimensional(3D) tooth model provides essential information to assist orthodontists for diagnosis and treatment planning. Currently, 3D tooth model is mainly obtained by segmentation and reconstruction from dental computed tomography(CT) images. However, the accuracy of 3D tooth model reconstructed from dental CT images is low and not applicable for invisalign design. And another serious problem also occurs, i.e. frequentative dental CT scan during different intervals of orthodontic treatment often leads to radiation to the patients. Hence, this paper proposed a method to reconstruct tooth model based on fusion of dental CT images and laser-scanned images. A complete3 D tooth model was reconstructed with the registration and fusion between the root reconstructed from dental CT images and the crown reconstructed from laser-scanned images. The crown of the complete 3D tooth model reconstructed with the proposed method has higher accuracy. Moreover, in order to reconstruct complete 3D tooth model of each orthodontic treatment interval, only one pre-treatment CT scan is needed and in the orthodontic treatment process only the laser-scan is required. Therefore, radiation to the patients can be reduced significantly.
Asunto(s)
Imagenología Tridimensional , Algoritmos , Tomografía Computarizada de Haz Cónico , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Incisivo , Rayos Láser , Modelos Dentales , Tomografía Computarizada por Rayos X/métodos , Corona del DienteRESUMEN
INTRODUCTION: The objective of this study was to determine the Hounsfield unit (HU) changes in the alveolar bone and root surfaces during controlled canine retractions. METHODS: Eighteen maxillary canine retraction patients were selected for this split-mouth design clinical trial. The canines in each patient were randomly assigned to receive either translation or controlled tipping treatment. Pretreatment and posttreatment cone-beam computed tomography scans of each patient were used to determine tooth movement direction and HU changes. The alveolar bone and root surface were divided into 108 divisions, respectively. The HUs in each division were measured. Mixed-model analysis of variance was applied to test the HU change distribution at the P <0.05 significance level. RESULTS: The HU changes varied with the directions relative to the canine movement. The HU reductions occurred at the root surfaces. Larger reductions occurred in the divisions that were perpendicular to the moving direction. However, HUs decreased in the alveolar bone in the moving direction. The highest HU reduction was at the coronal level. CONCLUSIONS: HU reduction occurs on the root surface in the direction perpendicular to tooth movement and in the alveolar bone in the direction of tooth movement when a canine is retracted.
Asunto(s)
Proceso Alveolar/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico/métodos , Diente Canino/diagnóstico por imagen , Técnicas de Movimiento Dental/métodos , Raíz del Diente/diagnóstico por imagen , Adolescente , Adulto , Densidad Ósea/fisiología , Niño , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Masculino , Persona de Mediana Edad , Cierre del Espacio Ortodóncico/instrumentación , Cierre del Espacio Ortodóncico/métodos , Alambres para Ortodoncia , Estudios Prospectivos , Técnicas de Movimiento Dental/instrumentación , Adulto JovenRESUMEN
Archwire bending is the key to orthodontic treatment, and multi-time bendings are inevitable during manual and robotic automated bending. The purpose of this paper is to quantitatively evaluate the mechanical effects of the different preparation modes and to compare the mechanical properties of the orthodontic loops in one and multiple bends. Three types of typical stainless steel orthodontic loops (vertical loop, T-loop, and L-loop) were used to quantify the mechanical effect of patterns for preparation by experimental comparison between loops with different bending times by using an orthodontic force tester (OFT). The results were statistically analyzed by t-test. The fracture test of the stainless steel archwire was also carried out, and the bending times at fracture were recorded. Results of the tests indicate that one-time and multi-time bending have a significant mechanical effect on orthodontic appliances. Multi-time bending causes significant mechanical decreases and can damage the appliances.
RESUMEN
INTRODUCTION: Young's modulus (E) and Poisson's ratio (v) of the periodontal ligament are needed in a finite element analysis for investigating the biomechanical behavior of a tooth, periodontal ligament, and bone complex. However, large discrepancies in E (0.01-1,750 MPa) and v (0.28-0.49) were reported previously. The objective of this study was to narrow the ranges and to provide equivalent E and v pairs suitable for finite element modeling of a tooth, periodontal ligament, and bone complex by using a reported crown load-displacement relationship as the criterion. METHODS: A 3-dimensional finite element model of a 3-tooth, periodontal ligament, and bone complex, consisting of a maxillary central incisor with 2 adjacent teeth, from a cone-beam computed tomography scan was created. The dimensions, constraints, and loading condition were kept similar to those reported in the human study. With the load applied to the crown, both v and E were adjusted independently, and the corresponding crown displacements were calculated. The resulting load-displacement curves were compared with those reported in the human study. The mean absolute displacement difference method was used to find the best fit. The E and v pairs that generated the minimum mean absolute displacement difference were identified. RESULTS: The finite element model with 1 of the 3 E and v pairs (v = 0.35, E = 0.87 MPa; v = 0.4, E = 0.71 MPa; and v = 0.45, E = 0.47 MPa) simulated the tooth, periodontal ligament, and bone complex well. The mean absolute displacement differences were 0.0135, 0.0138, and 0.0138 mm, respectively; these are less than 8% of 0.175 mm, which was the crown displacement of the tooth, periodontal ligament, and bone complex under the load of 500 cN. CONCLUSIONS: The E and v values close to the 3 pairs might be used for finite element modeling of the tooth, periodontal ligament, and bone complex.
Asunto(s)
Análisis de Elementos Finitos , Ligamento Periodontal/fisiología , Algoritmos , Proceso Alveolar/fisiología , Fenómenos Biomecánicos , Simulación por Computador , Tomografía Computarizada de Haz Cónico/métodos , Diente Canino/fisiología , Análisis del Estrés Dental , Módulo de Elasticidad , Humanos , Incisivo/fisiología , Maxilar/fisiología , Fenómenos Mecánicos , Modelos Biológicos , Diente/fisiología , Corona del Diente/fisiologíaRESUMEN
INTRODUCTION: The orthodontic load system, especially ideal moment-to-force ratios, is the commonly used design parameter of segmental T-loops for canine retraction. However, the load system, including moment-to-force ratios, can be affected by the changes in canine angulations and interbracket distances. We hypothesized that clinical changes in canine position and angulation during canine retraction will significantly affect the load system delivered to the tooth. METHODS: The load systems of 2 T-loop groups, one for translation and the other for controlled tipping, from 9 bilateral canine retraction patients were made to the targeted values obtained from finite element analyses and validated. Each loop was tested on the corresponding maxillary dental cast obtained in the clinic. The casts were made before and after each treatment interval so that both initial and residual load systems could be obtained. The pretreatment and posttreatment interbracket distances were recorded for calculating interbracket distance changes. RESULTS: As the interbracket distances decreased, the average retraction-force drop per interbracket distance reduction was 36 cN/mm, a 30% drop per 1 mm of interbracket distance decrease. The average antitipping-moment drops per interbracket distance reductions were 0.02 N-mm per millimeter for controlled tipping and 1.4 N-mm per millimeter for translation, about 0.6% and 17% drops per 1 mm of interbracket decrease, respectively. Consequently, the average moment-to-force ratio increases per 1 mm of interbracket distance reduction were 1.24 mm per millimeter for controlled tipping and 6.34 mm per millimeter for translation. There was a significant residual load, which could continue to move the tooth if the patient missed the next-scheduled appointment. CONCLUSIONS: Clinical changes in canine position and angulation during canine retraction significantly affect the load system. The initial planned moment-to-force ratio needs to be lower to reach the expected average ideal value. Patients should be required to follow the office visit schedule closely to prevent negative effects because of significant moment-to-force ratios increases with time.
Asunto(s)
Diente Canino/fisiología , Análisis del Estrés Dental , Diseño de Aparato Ortodóncico , Alambres para Ortodoncia , Técnicas de Movimiento Dental/instrumentación , Análisis del Estrés Dental/métodos , Análisis de Elementos Finitos , Humanos , Imagenología Tridimensional , Modelos Lineales , Estrés MecánicoRESUMEN
Establishing reliable correspondences between two views is one of the most important components of various vision tasks. This paper proposes a novel sparse-to-local-dense (S2LD) matching method to conduct fully differentiable correspondence estimation with the prior from epipolar geometry. The sparse-to-local-dense matching asymmetrically establishes correspondences with consistent sub-pixel coordinates while reducing the computation of matching. The salient features are explicitly located, and the description is conditioned on both views with the global receptive field provided by the attention mechanism. The correspondences are progressively established in multiple levels to reduce the underlying re-projection error. We further propose a 3D noise-aware regularizer with differentiable triangulation. Additional guidance from 3D space is encoded by the regularizer in training to handle the supervision noise caused by the errors in camera poses and depth maps. The proposed method demonstrates outstanding matching accuracy and geometric estimation capability on multiple datasets and tasks.
RESUMEN
PURPOSE: Cardiac ventricle segmentation from cine magnetic resonance imaging (CMRI) is a recognized modality for the noninvasive assessment of cardiovascular pathologies. Deep learning based algorithms achieved state-of-the-art result performance from CMRI cardiac ventricle segmentation. However, most approaches received less attention at the bottom layer of UNet, where main features are lost due to pixel degradation. To increase performance, it is important to handle the bottleneck layer of UNet properly. Considering this problem, we enhanced the performance of main features at the bottom layer of network. METHOD: We developed a fully automatic pipeline for segmenting the right ventricle (RV), myocardium (MYO), and left ventricle (LV) by incorporating short-axis CMRI sequence images. We propose a dilated residual network (DRN) to capture the features at full resolution in the bottleneck of UNet. Thus, it significantly increases spatial and temporal information and maintains the localization accuracy. A data-augmentation technique is employed to avoid overfitting and class imbalance problems. Finally, output from each expanding path is added pixel-wise to improve the training response. RESULTS: We used and evaluated our proposed method on automatic cardiac diagnosis challenge (ACDC). The test set consists of 50 patient records. The overall dice similarity coefficient (DSC) we achieved for our model is 0.924 ± 0.03, 0.907 ± 0.01, and 0.949 ± 0.05 for RV, MYO, and LV, respectively. Similarly, we obtained hausdorff distance (HD) scores of 10.09 ± 0.01, 7.25 ± 0.05, and 6.86 ± 0.02 mm for RV, MYO, and LV, respectively. The results show superior performance and outperformed state-of-the-art methods in terms of accuracy and reached expert-level segmentation. Consequently, the overall DSC and HD result improved by 1.0% and 1.5%, respectively. CONCLUSION: We designed a dilated residual UNet (DRN) for cardiac ventricle segmentation using short-axis CMRI. Our method has the advantage of restoring and capturing spatial and temporal information by expanding the receptive field without degrading the image main features in the bottleneck of UNet. Our method is highly accurate and quick, taking 0.28 s on average to process 2D MR images. Also, the network was designed to work on predictions of individual MR images to segment the ventricular region, for which our model outperforms many state-of-the-art methods.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Redes Neurales de la Computación , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagen por Resonancia Magnética/métodos , Corazón/diagnóstico por imagen , Ventrículos Cardíacos/diagnóstico por imagenRESUMEN
3D reconstruction and understanding from monocular camera is a key issue in computer vision. Recent learning-based approaches, especially multi-task learning, significantly achieve the performance of the related tasks. However a few works still have limitation in drawing loss-spatial-aware information. In this paper, we propose a novel Joint-confidence-guided network (JCNet) to simultaneously predict depth, semantic labels, surface normal, and joint confidence map for corresponding loss functions. In details, we design a Joint Confidence Fusion and Refinement (JCFR) module to achieve multi-task feature fusion in the unified independent space, which can also absorb the geometric-semantic structure feature in the joint confidence map. We use confidence-guided uncertainty generated by the joint confidence map to supervise the multi-task prediction across the spatial and channel dimensions. To alleviate the training attention imbalance among different loss functions or spatial regions, the Stochastic Trust Mechanism (STM) is designed to stochastically modify the elements of joint confidence map in the training phase. Finally, we design a calibrating operation to alternately optimize the joint confidence branch and the other parts of JCNet to avoid overfiting. The proposed methods achieve state-of-the-art performance in both geometric-semantic prediction and uncertainty estimation on NYU-Depth V2 and Cityscapes.
RESUMEN
Since the tumor moves with the patient's breathing movement in clinical surgery, the real-time prediction of respiratory movement is required to improve the efficacy of radiotherapy. Some RNN-based respiratory management methods have been proposed for this purpose. However, these existing RNN-based methods often suffer from the degradation of generalization performance for a long-term window (such as 600 ms) because of the structural consistency constraints. In this paper, we propose an innovative Long Short-term Transformer (LSTformer) for long-term real-time accurate respiratory prediction. Specifically, a novel Long-term Information Enhancement module (LIE) is proposed to solve the performance degradation under a long window by increasing the long-term memory of latent variables. A lightweight Transformer Encoder (LTE) is proposed to satisfy the real-time requirement via simplifying the architecture and limiting the number of layers. In addition, we propose an application-oriented data augmentation strategy to generalize our LSTformer to practical application scenarios, especially robotic radiotherapy. Extensive experiments on our augmented dataset and publicly available dataset demonstrate the state-of-the-art performance of our method on the premise of satisfying the real-time demand.
Asunto(s)
Neoplasias , Respiración , Humanos , Movimiento , Frecuencia RespiratoriaRESUMEN
PURPOSE: To assess the performance of a deep learning (DL) algorithm for evaluating and supervising cataract extraction using phacoemulsification with intraocular lens (IOL) implantation based on cataract surgery (CS) videos. MATERIALS AND METHODS: DeepSurgery was trained using 186 standard CS videos to recognize 12 CS steps and was validated in two datasets that contained 50 and 21 CS videos, respectively. A supervision test including 50 CS videos was used to assess the DeepSurgery guidance and alert function. In addition, a real-time test containing 54 CSs was used to compare the DeepSurgery grading performance to an expert panel and residents. RESULTS: DeepSurgery achieved stable performance for all 12 recognition steps, including the duration between two pairs of adjacent steps in internal validation with an ACC of 95.06% and external validations with ACCs of 88.77% and 88.34%. DeepSurgery also recognized the chronology of surgical steps and alerted surgeons to order of incorrect steps. Six main steps are automatically and simultaneously quantified during the evaluation process (centesimal system). In a real-time comparative test, the DeepSurgery step recognition performance was robust (ACC of 90.30%). In addition, DeepSurgery and an expert panel achieved comparable performance when assessing the surgical steps (kappa ranged from 0.58 to 0.77). CONCLUSIONS: DeepSurgery represents a potential approach to provide a real-time supervision and an objective surgical evaluation system for routine CS and to improve surgical outcomes.
Asunto(s)
Extracción de Catarata , Catarata , Aprendizaje Profundo , Facoemulsificación , Algoritmos , HumanosRESUMEN
In this paper, we propose a disparity refinement method that directly refines the winner-take-all (WTA) disparity map by exploring its statistical significance. According to the primary steps of the segment-based stereo matching, the reference image is over-segmented into superpixels and a disparity plane is fitted for each superpixel by an improved random sample consensus (RANSAC). We design a two-layer optimization to refine the disparity plane. In the global optimization, mean disparities of superpixels are estimated by Markov random field (MRF) inference, and then, a 3D neighborhood system is derived from the mean disparities for occlusion handling. In the local optimization, a probability model exploiting Bayesian inference and Bayesian prediction is adopted and achieves second-order smoothness implicitly among 3D neighbors. The two-layer optimization is a pure disparity refinement method because no correlation information between stereo image pairs is demanded during the refinement. Experimental results on the Middlebury and KITTI datasets demonstrate that the proposed method can perform accurate stereo matching with a faster speed and handle the occlusion effectively. It can be indicated that the "matching cost computation + disparity refinement" framework is a possible solution to produce accurate disparity map at low computational cost.
RESUMEN
OBJECTIVE: Orthodontic force simulation of tooth provides important guidance for clinical orthodontic treatment. However, previous studies did not involve the simulation of orthodontic force of archwire applied to full dentition. This study aimed to develop a method to simulate orthodontic force of tooth produced by loading a continuous archwire to full dentition using finite element method. METHOD: A three-dimensional tooth-periodontal ligament-bone complex model of mandible was reconstructed from computed tomography images, and models of brackets and archwire were built. The simulation was completed through two steps. First, node displacements of archwire before and after loading were estimated through moving virtual brackets to drive archwire deformation. Second, the obtained node displacements were loaded to implement the loading of archwire, and orthodontic force was calculated. An orthodontic force tester (OFT) was used to measure orthodontic force in vitro for the validation. RESULTS: After the simulation convergence, archwire was successfully loaded to brackets, and orthodontic force of teeth was obtained. Compared with the measured orthodontic force using the OFT, the absolute difference of the simulation results ranged from 0.5 to 22.7 cN for force component and ranged from 2.2 to 80.0 cNâ¢mm for moment component, respectively. The relative difference of the simulation results ranged from 2.5% to 11.0% for force component, and ranged from 0.6% to 14.7% for moment component, respectively. CONCLUSIONS: The developed orthodontic force simulation method based on virtual bracket displacement can be used to simulate orthodontic force provided by the archwire applied to full dentition.
Asunto(s)
Dentición , Modelos Biológicos , Diente/fisiología , Fenómenos Biomecánicos , Simulación por Computador , Humanos , Alambres para Ortodoncia , Ligamento PeriodontalRESUMEN
A complete digital tooth model is needed for computer-aided orthodontic treatment. However, current methods mainly use computed tomography (CT) images to reconstruct the tooth model which may require multiple CT scans during orthodontic progress, and the reconstructed model is also inaccurate in crown area. This study developed a tooth model reconstruction method based on integration of CT images and laser scan images to overcome these disadvantages. In the method, crown models and complete tooth models are first reconstructed, respectively, from laser scan images and CT images. Then, crown models from laser scan images and tooth models from CT images are registered. Finally, the crown from laser scan images and root from CT images were fused to obtain a new tooth model. Experimental results verified that the developed method is effective to generate the complete tooth model by integrating CT images and laser scan images. Using the proposed method, the reconstructed models provide more accurate crown than CT images, and it is feasible to obtain complete tooth models at any stage of orthodontic treatment by using one CT scan at the pretreatment stage and one laser scan at that stage to avoid multiple CT scans.
Asunto(s)
Imagenología Tridimensional/métodos , Modelos Dentales , Tomografía Computarizada por Rayos X/métodos , Diente/diagnóstico por imagen , Adolescente , Adulto , Femenino , Humanos , Masculino , Adulto JovenRESUMEN
Three-dimensional (3D) models of tooth-alveolar bone complex are needed in treatment planning and simulation for computer-aided orthodontics. Tooth and alveolar bone segmentation from computed tomography (CT) images is a fundamental step in reconstructing their models. Due to less application of alveolar bone in conventional orthodontic treatment which may cause undesired side effects, the previous studies mainly focused on tooth segmentation and reconstruction, and did not consider the alveolar bone. In this study, we proposed a method to implement both tooth and alveolar bone segmentation from dental CT images for reconstructing their 3D models. First, the proposed method extracted the connected region of tooth and alveolar bone from CT images using a global convex level set model. Then, individual tooth and alveolar bone are separated from the connected region based on Radon transform and a local level set model. The experimental results showed that the proposed method could successfully complete both the tooth and alveolar bone segmentation from CT images, and outperformed the state of the art tooth segmentation methods in terms of accuracy. This suggests that the proposed method can be used in reconstructing the 3D models of tooth-alveolar bone complex for precise treatment.