Boosted charge separation via Ce2S3 over dual Z-scheme ZnO-Ce2S3-MnO2 core double-shell nanocomposite for the degradation of diverse dye pollutants.

Herein, core double-shell direct dual Z-scheme ZnO-Ce2S3-MnO2 nanocomposite was synthesized via a hydrothermal route along with pure ZnO, Ce2S3, MnO2, and characterized by numerous characterization tools for application in synthetic dyes degradation. The XRD, Raman, and FTIR analyses have confirmed the nanocomposite formation. TEM images exhibited the core double-shell morphology with an average particle diameter of 81 nm and stacking of ZnO, Ce2S3, and MnO2. EDX confirmed the existence of desired elements in the grown composition. The varied oxidation states, presence of defects, and fast charge transfer were also revealed from XPS, PL, and EIS. The ZnO-Ce2S3-MnO2 nanocomposite has an optical energy bandgap of 2.84 eV, capable of decomposing harmful dyes with excellent efficiency, 99.81% MB, 97.62% MO, 88.5% MR, and 58.9% EY in 40 min sunlight exposure. The effect of several operating parameters is also observed and obtained results showed the optimal catalyst dose was 20 mg, pH of 8, and dye concentration of 10 ppm. The scavenger's experiment suggests that •O2- and •OH are the main active radicals in the photodegradation reaction which is also evident in the dual Z-scheme formation. The MnO2 and ZnO layers covered the Ce2S3 (core) and dual Z-scheme formation allows rapid kinetics of redox reaction and provides plenteous channels for transfer of photo-generated charge carriers during photocatalysis. Thus, core double-shell direct dual Z-scheme photocatalysts having inorganic components could be an excellent choice for photocatalysis at the industrial level, particularly for water purification.

Photocatalytic microbial disinfection under indoor conditions: Prospects and challenges of near IR-photoactive materials.

The accumulation of microbes especially in the air and in water bodies is causing the major disease outbreaks. Indoor environment remediation methods are necessary today to clean up these microbes. Among the remediation methods available, in situ generation of highly reactive and oxidizing radical species by advanced oxidation processes (AOPs) inactivate most of the microbes unselectively. Of these AOPs, photocatalytic microbial disinfection especially under indoor conditions is of great interest to maintain microbe-free indoor environment. For efficient microbes' inactivation under indoor conditions, the near IR and IR response of the photocatalysts must be improved. Though the photocatalytic disinfection of microbes using semiconductor-based photocatalysts has been extensively investigated, most of the photocatalysts that have been investigated are either weekly responsive or totally not irresponsive to IR photons due to inappropriate bandgap energies. Several strategies have been investigated to enhance the light harvesting properties of semiconductor based photocatalysts under indoor conditions and make them active to near IR and IR radiations. This review summarizes the recent progress in the field of materials for photocatalysts employed for microbial removal in indoor environments over the past decade as well as outlines key perspectives to enlighten future researches. The paper details the fundamentals of photocatalysis and basic properties of photocatalytic materials in the disinfection of common microbes under indoor conditions. The applications of photocatalytic materials in the disinfection of microbes in indoor environmental conditions are discussed and reviewed. Finally, the remaining challenges and future strategies/prospects in the design and synthesis of IR (and near IR) responsive photocatalysts are discussed.

Synthesis of Ordered Pt Nanocube Arrays Directed by Block Copolymer Nanotemplate and Their Potential on Ethanol Oxidation Reaction.

In this work, well-ordered platinum (Pt) nanocubes (NCs), with precise control on the size and the spatial arrangement, are synthesized from a microemulsion overgrowth in a block copolymer (BC) nanotemplate. The nanovials on this self-assembled BC template serve as microreactors for the reduction of the HCl/H2PtCl6 precursor and direct the ordered periodic arrangement of the reduced Pt nanoparticles (NPs). As the content of HCl increases from 0% to 25%, the Pt NPs evolve from quasi-spheres to NCs, for which the density functional theory (DFT) computation reveals that the different adsorption energies of Cl and HCl dominate this morphology transition. For their potential application in fuel cells, the electrochemical catalysis of the Pt NCs demonstrates a 2.8-fold mass activity in contrast to the commercial JM 40% catalyst at the same Pt loading in ethanol oxidation reaction (EOR) and a good stability of 2.2% ECSA loss over 10 000 CV cycling.

Sono-photocatalytic production of hydrogen by interface modified metal oxide insulators.

Dielectric oxide materials are well-known insulators that have many applications in catalysis as well as in device manufacturing industries. However, these dielectric materials cannot be employed directly in photochemical reactions that are initiated by the absorption of UV-Vis photons. Despite their insensitivity to solar energy, dielectric materials can be made sono-photoactive even for low energy IR photons by modifications of the interfacial properties of dielectric materials by noble metals and metal oxides. In this investigation, by way of interface modification of dielectric MgO nanoparticles by Ag metal and Ag2O nanoparticles, IR photon initiated sono-photocatalytic activity of MgO is reported. The observed photocatalytic activity is found to be the synergic action of both IR light and sonication effect and sonication assisted a multi-step, sub-bandgap excitation of electrons in the MgO is proposed for the observed catalytic activity of Ag/Ag2O coated MgO nanoparticles. Our investigation reveals that other dielectric materials such as silver coated SiO2 and Al2O3 also exhibit IR active sono-photocatalytic activity.