Photon color conversion enhancement of colloidal quantum dots inserted into a subsurface laterally-extended GaN nano-porous structure in an InGaN/GaN quantum-well template.

To improve the color conversion performance, we study the nanoscale-cavity effects on the emission efficiency of a colloidal quantum dot (QD) and the Förster resonance energy transfer (FRET) from quantum well (QW) into QD in a GaN porous structure (PS). For this study, we insert green-emitting QD (GQD) and red-emitting QD (RQD) into the fabricated PSs in a GaN template and a blue-emitting QW template, and investigate the behaviors of the photoluminescence (PL) decay times and the intensity ratios of blue, green, and red lights. In the PS samples fabricated on the GaN template, we observe the efficiency enhancements of QD emission and the FRET from GQD into RQD, when compared with the samples of surface QDs, which is attributed to the nanoscale-cavity effect. In the PS samples fabricated on the QW template, the FRET from QW into QD is also enhanced. The enhanced FRET and QD emission efficiencies in a PS result in an improved color conversion performance. Because of the anisotropic PS in the sample surface plane, the polarization dependencies of QD emission and FRET are observed.

Surface plasmon coupling effects on the photon color conversion behaviors of colloidal quantum dots in a GaN nanoscale hole with a nearby quantum-well structure.

To improve color conversion performance for color display application, we study the near-field-induced nanoscale-cavity effects on the emission efficiency and Förster resonance energy transfer (FRET) under the condition of surface plasmon (SP) coupling by inserting colloidal quantum dots (QDs) and synthesized Ag nanoparticles (NPs) into surface nano-holes fabricated on a GaN template and an InGaN/GaN quantum-well (QW) template. In the QW template, the inserted Ag NPs are close to either QWs or QDs for producing three-body SP coupling to enhance color conversion. Time-resolved and continuous-wave photoluminescence (PL) behaviors of the QW- and QD-emitting lights are investigated. The comparison between the nano-hole samples and the reference samples of surface QD/Ag NP shows that the nanoscale-cavity effect of the nano-hole leads to the enhancements of QD emission, FRET between QDs, and FRET from QW into QD. The SP coupling induced by the inserted Ag NPs can enhance the QD emission and FRET from QW into QD. Its result is further enhanced through the nanoscale-cavity effect. The relative continuous-wave PL intensities among different color components also show the similar behaviors. By introducing SP coupling to a color conversion device with the FRET process in a nanoscale cavity structure, we can significantly improve the color conversion efficiency. Simulation results confirm the basic observations in experiment.

Mesh size control in forming an Ag/AgO nano-network structure for transparent conducting application.

The variation behaviors of the morphology, transmission, and sheet resistance of the surface Ag/AgO nano-network (NNW) structures fabricated under different illumination conditions and with different Ag deposition thicknesses and thermal annealing temperatures in forming initial Ag nanoparticles (NPs) are studied. Generally, an NNW structure with a smaller mesh size or a denser branch distribution has a lower transmission and a lower sheet resistance level. Under the fabrication condition of a broader illumination spectrum, a lower thermal annealing temperature, or a thicker Ag deposition, we can obtain an NNW structure of a smaller mesh size. The mesh size of an NNW structure is basically controlled by the seed density of Brownian tree (BT) at the beginning of light illumination. A BT seed can be formed through a stronger local localized surface plasmon resonance for accelerating Ag oxidation in a certain region. Once an Ag/AgO BT seed is formed, the surrounding Ag NPs are reorganized to form the branches of a BT. Multiple BTs are connected to form a large-area NNW structure, which can serve as a transparent conductor. Under the fabrication conditions of a broader illumination spectrum, 3 nm Ag deposition, and 100 °C thermal annealing, we can implement an NNW structure to achieve ∼1.15µm in mesh size, ∼90 Ω sq-1in sheet resistance, and 93%-77% in transmittance within the wavelength range between 370 and 700 nm.

Förster resonance energy transfer in surface plasmon coupled color conversion processes of colloidal quantum dots.

Förster resonance energy transfer (FRET) from a green-emitting quantum dot (GQD) into a red-emitting quantum dot (RQD) is an important mechanism in a multiple-color conversion process, particularly under the surface plasmon (SP) coupling condition for enhancing color conversion efficiency. Here, the dependencies of FRET efficiency on the relative concentrations of GQD and RQD in their mixtures and their surface molecule coatings for controlling surface charges are studied. Also, the SP coupling effects induced by two kinds of Ag nanoparticles on the emission behaviors of GQD and RQD are demonstrated, particularly when FRET is involved in the coupling process. FRET efficiency is reduced under the SP coupling condition. SP coupling can enhance the color conversion efficiency of either GQD or RQD. The combination of SP coupling and FRET can be used for controlling the relative converted light intensities in a multiple-color conversion process.

Surface plasmon coupling effects on the förster resonance energy transfer from quantum dot into rhodamine 6G.

Rhodamine 6G (R6G) molecules linked CdZnSeS/ZnS green-emitting quantum dots (QDs) are self-assembled onto Ag nanoparticles (NPs) for studying the surface plasmon (SP) coupling effect on the Förster resonance energy transfer (FRET) process from QD into R6G. SP coupling can enhance the emission efficiency of QD such that FRET has to compete with QD emission for transferring energy into R6G. It is found that FRET efficiency is reduced under the SP coupling condition. Although R6G emission efficiency can also be enhanced through SP coupling when it is directly linked onto Ag NP, the enhancement decreases when R6G is linked onto QD and then the QD-R6G complex is self-assembled onto Ag NP. In particular, R6G emission efficiency can be reduced through SP coupling when the number of R6G molecules linked onto a QD is high. A rate-equation model is built for resembling the measured photoluminescence decay profiles and providing us with more detailed explanations for the observed FRET and SP coupling behaviors.

Combined effects of surface plasmon coupling and Förster resonance energy transfer on the light color conversion behaviors of colloidal quantum dots on an InGaN/GaN quantum-well nanodisk structure.

By forming nanodisk (ND) structures on a blue-emitting InGaN/GaN quantum-well (QW) template, the QWs become close to the red-emitting quantum dots (QDs) and Ag nanoparticles (NPs) attached onto the sidewalls of the NDs such that Förster resonance energy transfer (FRET) and surface plasmon (SP) coupling can occur to enhance the efficiency of blue-to-red color conversion. With a larger ND height, more QWs are exposed to open air on the sidewall for more QD/Ag NP attachment through QD self-assembly and Ag NP drop casting such that the FRET and SP coupling effects, and hence the color conversion efficiency can be enhanced. A stronger FRET process leads to a longer QD photoluminescence (PL) decay time and a shorter QW PL decay time. It is shown that SP coupling can enhance the FRET efficiency.

Important role of surface plasmon coupling with the quantum wells in a surface plasmon enhanced color-converting structure of colloidal quantum dots on quantum wells.

To improve the color-conversion efficiency based on a quantum-well (QW) light-emitting diode (LED), a more energy-saving strategy is needed to increase the energy transfer efficiency from the electrical input power of the LED into the emission of over-coated color-converter, not just from LED emission into converted light. In this regard, the efficiency of energy transfer of any mechanism from LED QW into the color-converter is an important issue. By overlaying blue-emitting QW structures and GaN templates with both deposited metal nanoparticles (DMNPs) and color-converting quantum dot (QD) linked synthesized metal nanoparticles (SMNPs) of different localized surface plasmon (LSP) resonance wavelengths for producing multiple surface plasmon (SP) coupling mechanisms with the QW and QD, we study the enhancement variations of their internal quantum efficiencies and photoluminescence decay times. By comparing the QD emission efficiencies between the samples with and without QW, one can observe the advantageous effect of QW coupling with LSP resonances on QD emission efficiency. Also, with the LSP resonance wavelengths of both DMNPs and SMNPs close to the QW emission wavelength for producing strong SP coupling with the QW and hence QD absorption, a higher QD emission or color-conversion efficiency can be obtained.

A case of GNE myopathy mimicking hereditary motor neuropathy.

A 36-year-old woman who presented with upper limb distal weakness since the age of 15 years, with gradual progression to the lower limbs, is reported. Hereditary motor neuropathy was initially suspected based on distal weakness and hyporeflexia; however, whole exome sequencing accidentally revealed a compound heterozygous variant in the GNE gene, and ultrasound revealed increased homogeneous echogenicity in the involved muscles, which is characteristic of myopathic changes. Muscle magnetic resonance imaging revealed fatty infiltration in all limb muscles, sparing the triceps brachii, vastus lateralis and vastus medialis. Muscle biopsy revealed intracytoplasmic rimmed vacuole, supporting the diagnosis of GNE myopathy.

Emission behaviors of colloidal quantum dots linked onto synthesized metal nanoparticles.

With two different residual surfactants, four different metal nanoparticles (NPs), including two Au NPs and two Ag NPs are synthesized for linking with red-emitting CdZnSeS/ZnS colloidal quantum dots (QDs) to enhance QD emission efficiency. Those metal NPs are first connected with amino polyethylene glycol thiol of different molecular weights to avoid aggregation and make them positively charged. They can attract negatively charged QDs for inducing surface plasmon (SP) coupling such that either QD absorption or emission and hence overall color conversion efficiency can be enhanced. The enhancement of QD emission efficiency is evaluated through the comparison of time-resolved photoluminescence behaviors under different QD linkage conditions. Such results are confirmed by the measurement of the emission quantum efficiency of QD. It is found that by linking QDs onto Ag NPs, the QD emission efficiency is more enhanced, when compared with Au NPs. Also, depending on the synthesis process, the residual surfactant of citrate leads to a relatively large increment in QD emission efficiency, when compared to the surfactant of cetrimonium chloride. A more enhanced QD emission efficiency is caused by a higher QD linkage capability and a stronger SP coupling effect.

Spatial range of the plasmonic Dicke effect in an InGaN/GaN multiple quantum well structure.

The plasmonic Dicke effect means a cooperative emission mechanism of multiple light emitters when they are simultaneously coupled with the same surface plasmon (SP) mode of a metal nanostructure to achieve a higher collective emission efficiency. Here, we compare the enhancements of emission efficiency among a series of SP-coupled InGaN/GaN quantum-well (QW) structures of different QW period numbers to show an emission behavior consistent with the plasmonic Dicke effect. The relative enhancement of overall emission efficiency increases with QW period number until it reaches a critical value, beyond which the enhancement starts to decrease. This critical QW period number corresponds to the effective depth range of the plasmonic Dicke effect in a multiple-QW system. It also represents an optimized QW structure for maximizing the SP coupling effect. Internal quantum efficiency and time-resolved photoluminescence are measured for comparing the enhanced emission efficiencies of blue and green QW structures with different QW period numbers through SP coupling induced by surface Ag nanoparticles.

Theoretical analysis of a white-light LED array based on a GaN nanorod structure.

Based on the experimentally demonstrated In content distribution in the InGaN/GaN quantum wells on a two-section GaN nanorod (NR) sidewall, a white-light light-emitting diode (LED) without phosphor is designed and simulated. Following the dependencies of the In diffusion length and incorporation ratio on NR geometric variables of a theoretical model, the height, radius, and tapering section geometry of the GaN NR are designed for controlling the relative intensities of a blue and a yellow emission component to mix into white light. The higher-In upper section of the NR is first excited to emit a relatively stronger yellow component when injection current is low. As the injection current increases, more current spreads into the lower-In lower section, eventually leading to a stronger blue emission component. The proposed NR LED structure provides an alternative solution for phosphor-free white-light generation.

[Effects of the injectable glycol-chitosan based hydrogel on the proliferation and differentiation of human dental pulp cells].

OBJECTIVE: To prepare glycol-chitosan (GC)-based single/dual-network hydrogels with different composition ratios (GC31, DN3131 and DN6262) and to investigate the effects of hydrogel scaffolds on biological behavior of human dental pulp cell (hDPC) encapsulated. METHODS: GC-based single-network hydrogels (GC31) and GC-based dual-network hydrogels (DN3131, DN6262) with different composition ratios were prepared. The injectability was defined as the average time needed to expel a certain volume of hydrogel under a constant force. The degradation of the hydrogel was determined by the weight loss with time. The fracture stress was measured using a universal testing machine. The proliferation of hDPCs in hydrogels was detected using the cell counting kit-8 (CCK-8) method and CalceinAM/PI Live/Dead assay. After 14 days of odontoblastic induction, the expression of alkaline phosphatase (ALP), dentin sialophosphoprotein (DSPP) and dentin matrix protein-1 (DMP-1) was detected by real-time quantitative reverse transcription PCR (real-time RT-PCR) and the mineralized nodules was observed by Von Kossa staining. RESULTS: The injectability of all three groups of hydrogels was acceptable. The time of injection of GC31 was the shortest, and that of DN6262 was longer than DN3131 (P<0.05). The degradation rate of GC31 hydrogel in vitro was significantly faster than that of the dual-network hydrogel groups (P<0.05). There was no significant difference between DN3131 and DN6262 (P>0.05). The compressive resistance failure point of GC31 group was 1.10 kPa, while it was 7.33 kPa and 43.30 kPa for DN3131 and DN6262. The compressive strength of dual-network hydrogel was significantly enhanced compared with single-network hydrogel. hDPCs were in continuous proliferation in all the three groups, and the GC31 group showed a higher proliferation rate (P<0.05). The expression levels of DSPP, DMP-1 and ALP in the dual-network hydrogel groups (DN3131, DN6262) were significantly higher than that of GC31 after culturing for 14 days (P<0.05), there was no difference in the expression levels of DMP-1 and ALP between DN3131 and DN6262 (P>0.05); Von Kossa staining showed that more mineralization deposition and mass-shaped mineralized nodules formed in DN3131 and DN6262, while only light brown calcium deposition staining was observed in GC31 group, which was scattered in granular forms. CONCLUSION: GC-based single/dual network hydrogels with different composition ratios met the injectable requirements. GC31 group had a lower mechanical properties, in which hDPCs exhibited a higher proliferation rate. dual-network hydrogels had slower degradation rate and higher mechanical properties, in which hDPCs exhibited better odontoblastic differentiation potential and mineralization potential.

Simulation study on light color conversion enhancement through surface plasmon coupling.

A theoretical model together with a numerical algorithm of surface plasmon (SP) coupling are built for simulating SP-enhanced light color conversion from a shorter-wavelength radiating dipole (representing a quantum well - QW) into a longer-wavelength one (representing a quantum dot - QD) through QD absorption at the shorter wavelength. An Ag nanoparticle (NP) located between the two dipoles is designed for producing strong SP couplings simultaneously at the two wavelengths. At the QW emission wavelength, SP couplings with the QW and QD dipoles lead to the energy transfer from the QW into the QD and hence the absorption enhancement of the QD. At the QD emission wavelength, SP coupling with the excited QD dipole results in the enhancement of QD emission efficiency. The combination of the SP-induced effects at the two wavelengths leads to the increase of overall color conversion efficiency. The color conversion efficiencies in using Ag NPs of different geometries or SP resonance behaviors for producing different QD absorption and emission enhancement levels are compared.

Color conversion efficiency enhancement of colloidal quantum dot through its linkage with synthesized metal nanoparticle on a blue light-emitting diode.

Four surface-modified and, hence, positively charged metal nanoparticles (NPs) of different localized surface plasmon (LSP) resonance wavelengths are synthesized for linking with negatively charged, red-emitting colloidal CdZnSeS/ZnS quantum dots (QDs) on the top surface of a blue-emitting InGaN/GaN quantum well (QW) light-emitting diode (LED) through electro-static force. The metal NP-QD linkage leads to a short distance between them for producing their strong surface plasmon (SP) coupling, such that QD absorption and emission can be enhanced. Meanwhile, the small p-GaN thickness in the LED results in strong SP coupling between the LSP resonance of metal NP and the QWs of the LED, leading to enhanced QW emission and, hence, stronger QD excitation. All those factors together result in the increase of the color conversion efficiency of the QD.

Control of pore structure in a porous gold nanoparticle for effective cancer cell damage.

For tumor treatment, compared with gold nanoparticles (NPs) of other geometries, a porous gold NP (PGNP) has the advantages of stronger localized surface plasmon resonance (LSPR) due to the pore nanostructures and a larger surface area to link with more drug or photosensitizer (PS) molecules for more effective delivery into cancer cells. Different from the chemical synthesis methods, in this paper we demonstrate the fabrication procedures of PGNP based on shaped Au/Ag deposition on a Si substrate and elucidate the advantageous features. PGNPs fabricated under different conditions, including different deposited Au/Ag content ratios and different alloying annealing temperatures, are compared for optimizing the fabrication condition in terms of LSPR wavelength, PS linkage capability, and cancer cell damage efficiency. It is found that within the feasible fabrication parameter ranges, the Au/Ag content ratio of 3:7 and alloying annealing temperature at 600 °C are the optimized conditions. In comparing with widely used gold NPs of other geometries, PGNP fabricated under the optimized conditions can be used for achieving a significantly higher linked PS molecule number per unit gold weight.

Symmetrical acral keratoderma revisited: proposal for a new term, 'pigmented carpotarsal hyperkeratosis'.

First reported from Taiwan mistakenly as acral acanthosis nigricans in 1991, pigmented carpotarsal hyperkeratosis or hyperkeratosis nigricans carpi et tarsi displays a peculiar distribution of velvety brown-grey hyperpigmented plaques symmetrically on the flexural side of the wrists and ankles and on the dorsal sides of the hands and feet. A marked epidermal hyperkeratosis with typically mild acanthosis and papillomatosis is observed in histology. Whitish maceration upon perspiration or water exposure, with exacerbation in summer but remission in winter, is common. The association with obesity, endocrine disorders, atopic dermatitis, ichthyosis or malignancy is unknown. Familial occurrence and hereditary patterns are ill-defined. There is preliminary evidence indicating a pathogenic role of missense mutation in the transcription factor 4 gene. Treatment is empirical, with good outcome with topical retinoids and keratolytic agents. Recurrence is common, and long-term prognosis is unclear. To be distinguished are acral acanthosis nigricans, palmoplantar keratoderma of the Nagashima type, palmoplantar keratoderma of the Bothnian type and aquagenic palmoplantar keratoderma. Most reported cases are from Southern China and are predominantly observed in men between the ages of 20 and 40 years. The currently used term 'symmetrical acral keratoderma' is non-specific and misleading and may lead to global unawareness, underreporting or misdiagnosis of this phenomenon. Further genetic and molecular studies are required to clarify its pathogenesis and relation to palmoplantar keratoderma.

Different surface plasmon coupling behaviors of a surface Al nanoparticle between TE and TM polarizations in a deep-UV light-emitting diode.

The formulations and numerical algorithms of a three-level model for studying the Purcell effect produced by the scattering of an air/AlGaN interface and the surface plasmon (SP) coupling effect induced by a surface Al nanoparticle in a two-polarization emission system to simulate the transverse-electric- (TE-) and transverse-magnetic- (TM-) polarized emissions in an AlxGa1-xN/AlyGa1-yN (y > x) quantum well (QW) are built. In reasonably selected ranges of Al content for an AlGaN QW to emit deep-ultraviolet (UV) light, the enhancement (suppression) of TE- (TM-) polarized emission is mainly caused by the SP-coupling (interface-scattering) effect. Different from a two two-level model, in the three-level model the TE- and TM-polarized emissions compete for electron in the shared upper state, which is used for simulating the conduction band, such that either interface-scattering or SP-coupling effect becomes weaker. In a quite large range of emission wavelength, in which the intrinsic emission is dominated by TM polarization, with the interface-scattering and SP-coupling effects, the TE-polarized emission becomes dominant for enhancing the light extraction efficiency of a deep-UV light-emitting diode.

Coupling of a light-emitting diode with surface plasmon polariton or localized surface plasmon induced on surface silver gratings of different geometries.

A metal grating on top of a light-emitting diode (LED) with a designed grating period for compensating the momentum mismatch can enhance the surface plasmon polariton (SPP) coupling effect with the quantum wells (QWs) to improve LED performance. Here, we demonstrate the experimental results showing that the induced localized surface plasmon (LSP) resonance on such a metal grating can dominate the QW coupling effect for improving LED performance, particularly when grating ridge height is large. The finding is illustrated by fabricating Ag gratings on single-QW, green-emitting LEDs of different p-type thicknesses with varied grating ridge height and width such that the distance between the grating ridge tip and the QW can be controlled. Reflection spectra of the Ag grating structures are measured and simulated to identify the SPP or LSP resonance behaviors at the QW emission wavelength. The measured results of LED performances show that in the LED samples under study, both SPP and LSP couplings can lead to significant enhancements of internal quantum efficiency and electroluminescence intensity. At the designated QW emission wavelength, with a grating period theoretically designed for momentum matching, the LSP coupling effect is stronger, when compared with SPP coupling.

Efficiency enhancement of light color conversion through surface plasmon coupling.

The efficiency enhancement of light color conversion from blue quantum well (QW) emission into red quantum dot (QD) emission through surface plasmon (SP) coupling by coating CdSe/ZnS QDs on the top of an InGaN/GaN QW light-emitting diode (LED) is demonstrated. Ag nanoparticles (NPs) are fabricated within a transparent conductive Ga-doped ZnO interlayer to induce localized surface plasmon (LSP) resonance for simultaneously coupling with the QWs and QDs. Such a coupling process generates three enhancement effects, including QW emission, QD absorption at the QW emission wavelength, and QD emission, leading to an overall enhancement effect of QD emission intensity. An Ag NP geometry for inducing an LSP resonance peak around the middle between the QW and QD emission wavelengths results in the optimized condition for maximizing QD emission enhancement. Internal quantum efficiency and photoluminescence (PL) decay time measurements are performed to show consistent results with LED performance characterizations, even though the QD absorption of PL excitation laser may mix with the SP-induced QD absorption enhancement effect in PL measurement.

Further emission efficiency improvement of a commercial-quality light-emitting diode through surface plasmon coupling.

It is usually believed that surface plasmon (SP) coupling is practically useful only for improving the performance of a light-emitting diode (LED) with a low intrinsic internal quantum efficiency (IQE). In this Letter, we demonstrate that the performance of a commercial-quality blue LED with a high IQE (>80%) can still be significantly improved through SP coupling based on a surface Ag nanoparticle (NP) structure. The performance improvement of such an LED is achieved by increasing the Mg doping concentration in its p-AlGaN electron blocking layer to enhance the hole injection efficiency such that the p-GaN layer thickness can be significantly reduced without sacrificing its electrical property. In this situation, the distance between surface Ag NPs and quantum wells is decreased and hence SP coupling strength is increased. By reducing the distance between the surface Ag NPs and the top quantum well to 66 nm, the IQE can be increased to almost 90% (an ∼11% enhancement) and the electroluminescence intensity can be enhanced by ∼24%.