Electrocatalytic reductive deuteration of arenes and heteroarenes.

The incorporation of deuterium to organic molecules has widespread applications in medicinal chemistry and material science1,2. For example, deuterated drugs e.g. Austedo3, Donafenib4 and Sotyktu5 were recently approved. There are various methods for the synthesis of deuterated compounds with high deuterium incorporation6. However, the reductive deuteration of aromatic hydrocarbons, ubiquitous chemical feedstocks, to saturated cyclic compounds has rarely been achieved. Here, we describe a scalable and general electrocatalytic method for the reductive deuteration and deuterodefluorination of (hetero)arenes using a prepared nitrogen doped electrode and D2O, giving perdeuterated and saturated deuterocarbon products. This protocol has been successfully applied to the synthesis of 13 highly deuterated drug molecules. Mechanistic investigations suggest that the Ru-D species, generated by electrolysis of D2O in the presence of nitrogen-doped Ru electrode, are key intermediates that directly reduce aromatic compounds. This quick and cost-effective methodology for the preparation of highly D-labeled saturated (hetero)cycles compounds could be applied in the drug development and metabolism studies.

Multiscale Anion-Hybrid in Atomic Ni Sites for High-Rate Water Electrolysis: Insights into the Charge Accumulation Mechanism.

Single-atom catalysts, characterized by transition metal-(N/O)4 units on nanocarbon (M-(N/O)4-C), have emerged as efficient performers in water electrolysis. However, there are few guiding principles for accurately controlling the ligand fields of single atoms to further stimulate the catalyst activities. Herein, using the Ni-(N/O)4-C unit as a model, we develop a further modification of the P anion on the outer shells to modulate the morphology of the ligand. The catalyst thus prepared possesses high activity and excellent long-term durability, surpassing commercial Pt/C, RuO2, and currently reported single-atom catalysts. Notably, mechanistic studies demonstrated that the pseudocapacitive feature of multiscale anion-hybrid nanocarbon is considerable at accumulating enough positive charge [Q], contributing to the high oxygen evolution reaction (OER) order (ß) through the rate formula. DFT calculations also indicate that the catalytic activity is decided by the suitable barrier energy of the intermediates due to charge accumulation. This work reveals the activity origin of single atoms on multihybrid nanocarbon, providing a clear experiential formula for designing the electronic configuration of single-atom catalysts to boost electrocatalytic performance.

The developments of C-N bond formation via electrochemical Ritter-type reactions.

With the development of organic electrochemical synthesis, a series of notable achievements have been made in electrochemical Ritter amination reactions, which have enriched the methods available for constructing C-N bonds. In this review, electrochemical Ritter amination reactions are introduced based on the classification of reaction substrates, including olefins, aromatics, alkylbenzenes, and the less reported carboxylic acids, ketones, sulfides, and alkanes. The application of electrochemical technology to Ritter reactions has improved the harsh conditions of the traditional reactions, and extended the substrate scope and the structural diversity of the products. The application value of Ritter reactions in organic synthesis has also been further expanded.

Unraveling the Structure and Reactivity Patterns of the Indole Radical Cation in Regioselective Electrochemical Oxidative Annulations.

Oxidation-induced strategy for inert chemical bond activation through highly active radical cation intermediate has exhibited unique reactivity. Understanding the structure and reactivity patterns of radical cation intermediates is crucial in the mechanistic study and will be beneficial for developing new reactions. In this work, the structure and properties of indole radical cations have been revealed using time-resolved transient absorption spectroscopy, in situ electrochemical UV-vis, and in situ electrochemical electron paramagnetic resonance (EPR) technique. Density functional theory (DFT) calculations were used to explain and predict the regioselectivity of several electrochemical oxidative indole annulations. Based on the understanding of the inherent properties of several indole radical cations, two different regioselective annulations of indoles have been successfully developed under electrochemical oxidation conditions. Varieties of furo[2,3-b]indolines and furo[3,2-b]indolines were synthesized in good yields with high regioselectivities. Our mechanistic insights into indole radical cations will promote the further development of oxidation-induced indole functionalizations.

Electrophotochemical Ce-Catalyzed Ring-Opening Functionalization of Cycloalkanols under Redox-Neutral Conditions: Scope and Mechanism.

Selective cleavage and functionalization of C-C bonds in alcohols is gaining increasing interest in organic synthesis and biomass conversion. In particular, the development of redox-neutral catalytic methods with cheap catalysts and clean energy is of utmost interest. In this work, we report a versatile redox-neutral method for the ring-opening functionalization of cycloalkanols by electrophotochemical (EPC) cerium (Ce) catalysis. The EPC-Ce-enabled catalysis allows for cycloalkanols with different ring sizes to be cleaved while tolerating a broad range of functional groups. Notably, in the presence of chloride as a counteranion and electrolyte, this protocol selectively leads to the formation of C-CN, C-C, C-S, or C-oxime bonds instead of a C-halide bond after ß-scission. A preliminary mechanistic investigation indicates that the redox-active Ce catalyst can be tuned by electro-oxidation and photo-reduction, thus avoiding the use of an external oxidant. Spectroscopic characterizations (cyclic voltammetry, UV-vis, electron paramagnetic resonance, and X-ray absorption fine structure) suggest a Ce(III)/Ce(IV) catalytic pathway for this transformation, in which a Ce(IV)-alkoxide is involved.

In Situ Synthesis of CuN4 /Mesoporous N-Doped Carbon for Selective Oxidative Crosscoupling of Terminal Alkynes under Mild Conditions.

The 1,3-conjugated diynes are an important class of chemical intermediates, and the selective crosscoupling of terminal alkynes is an efficient chemical process for manufacturing asymmetrical 1,3-conjugated diynes. However, it often occurs in homogenous conditions and costs a lot for reaction treatment. Herein, a copper catalyzed strategy is used to synthesize highly ordered mesoporous nitrogen-doped carbon material (OMNC), and the copper species is in situ transformed into the copper single-atom site with four nitrogen coordination (CuN4 ). These features make the CuN4 /OMNC catalyst efficient for selective oxidative crosscoupling of terminal alkynes, and a wide range of asymmetrical and symmetrical 1,3-diynes (26 examples) under mild conditions (40 °C) and low substrates ratio (1.3). Density functional theory (DFT) calculations reveal that the aryl-alkyl crosscoupling has the lowest energy barrier on the CuN4 site, which can explain the high selectivity. In addition, the catalyst can be separated and reused by simply centrifugation or filtration. This work can open a facile avenue for constructing single-atom loaded mesoporous materials to bridge homogeneous and heterogeneous catalysis.

Electrochemical Oxidation Enables Regioselective and Scalable α-C(sp3)-H Acyloxylation of Sulfides.

A highly selective, environmentally friendly, and scalable electrochemical protocol for the construction of α-acyloxy sulfides, through the synergistic effect of self-assembly-induced C(sp3)-H/O-H cross-coupling, is reported. It features exceptionally broad substrate scope, high regioselectivity, gram-scale synthesis, construction of complex molecules, and applicability to a variety of nucleophiles. Moreover, the soft X-ray absorption technique and a series of control experiments have been utilized to demonstrate the pivotal role of the self-assembly of the substrates, which indeed is responsible for the excellent compatibility and precise control of high regioselectivity in our electrochemical protocol.

Revealing the reduction process of Cu(ii) by sodium bis(trimethylsilyl)amide.

The mechanistic investigation of copper-catalysed transformations has been an important and fundamental task. Herein, we report via XAS and EPR spectroscopy that the sodium bis(trimethylsilyl)amide could reduce Cu(ii) to a Cu(i) species serving as an electron donor. XAS spectroscopy demonstrates that the newly formed Cu(i) species is the Cu[N(TMS)2]2Na ate complex, in which the nitrogen atoms coordinate with copper linearly.

Chemoselective Hydrogenation with Supported Organoplatinum(IV) Catalyst on Zn(II)-Modified Silica.

Well-defined organoplatinum(IV) sites were grafted on a Zn(II)-modified SiO2 support via surface organometallic chemistry in toluene at room temperature. Solid-state spectroscopies including XAS, DRIFTS, DRUV-vis, and solid-state (SS) NMR enhanced by dynamic nuclear polarization (DNP), as well as TPR-H2 and TEM techniques revealed highly dispersed (methylcyclopentadienyl)methylplatinum(IV) sites on the surface ((MeCp)PtMe/Zn/SiO2, 1). In addition, computational modeling suggests that the surface reaction of (MeCp)PtMe3 with Zn(II)-modified SiO2 support is thermodynamically favorable (Δ G = -12.4 kcal/mol), likely due to the increased acidity of the hydroxyl group, as indicated by NH3-TPD and DNP-enhanced 17O{1H} SSNMR. In situ DRIFTS and XAS hydrogenation experiments reveal the probable formation of a surface Pt(IV)-H upon hydrogenolysis of Pt-Me groups. The heterogenized organoplatinum(IV)-hydride sites catalyze the selective partial hydrogenation of 1,3-butadiene to butenes (up to 95%) and the reduction of nitrobenzene derivatives to anilines (up to 99%) with excellent tolerance of reduction-sensitive functional groups (olefin, carbonyl, nitrile, halogens) under mild reaction conditions.

Tandem MS Elucidation of the Late-Stage Degradation Mechanism of Nitroplasticizer.

Understanding the degradation behavior of nitroplasticizer (NP) and the subsequent production of nitro-organics is crucial for both environmental monitoring and material development. A nontargeted approach via LC-QTOF-MS was employed to thoroughly study the degradation mechanism of NP in its late aging stage. Both positive and negative modes of ESI were performed to increase the compound coverage. To shed light on the fragmentation behavior of NP degradants (e.g., compounds containing a high density of NO2 moieties and oxygen sites) in the positive mode, which is rarely reported, the high-resolution tandem MS information on precursor ions at m/z 251(+), 254(+), 266(+), and 270(+) and a pair of isomeric ions at m/z 284(+) was investigated to extract their common diagnostic ions and dissociation channels, including the neutral loss of 2,2-dinitropropanol, nitro-nitrite rearrangement, homolytic cleavage of NO2, and simple inductive cleavage. Additionally, leveraging the sensitivity for nitroaromatics in the negative polarity, negative ions m/z 182(-) and 233(-) are identified as dinitroaniline and dinitronaphthol, respectively, which confirm the secondary hydrolysis pathway of the antioxidant (e.g., N-phenyl-2-naphthylamine) postulated in our previous work. In addition to earlier findings, the detection of these eight degradants further supports the evidence of increased acid concentration and aging temperatures in the late-stage NP environment, which contribute to intricate degradation behaviors in different aging environments.

Catalytic conversion of mixed polyolefins under mild atmospheric pressure.

The chemical recycling of polyolefin presents a considerable challenge, especially as upcycling methods struggle with the reality that plastic wastes typically consist of mixtures of polyethylene (PE), polystyrene (PS), and polypropylene (PP). We report a catalytic aerobic oxidative approach for polyolefins upcycling with the corresponding carboxylic acids as the product. This method encompasses three key innovations. First, it operates under atmospheric pressure and mild conditions, using O2 or air as the oxidant. Second, it is compatible with high-density polyethylene, low-density polyethylene, PS, PP, and their blends. Third, it uses an economical and recoverable metal catalyst. It has been demonstrated that this approach can efficiently degrade mixed wastes of plastic bags, bottles, masks, and foam boxes.

Roles of HNO x and Carboxylic Acids in the Thermal Stability of Nitroplasticizer.

In the thermal aging of nitroplasticizer (NP), the produced nitrous acid (HONO) can decompose into reactive nitro-oxide species and nitric acid (HNO3). These volatile species are prone to cause cascaded deterioration of NP and give rise to various acidic constituents. To gain insight on the early stage of NP degradation, an adequate method for measuring changes in the concentrations of HONO, HNO3, and related acidic species is imperative. The typical assessment of acidity in nonaqueous solutions (i.e., acid number) cannot differentiate acidic species and thus presents difficulty in the measurement of HONO and HNO3 at a micromolar concentration level. Using liquid-liquid extraction and ion chromatography (IC), we developed a fast and unambiguous analytical method to accurately determine the concentration of HONO, HNO3, acetic/formic acids, and oxalic acid in aged NP samples. Given by the overlay analysis results of liquid chromatography coupled with quadrupole time-of-flight mass spectrometry and IC, the prominent increase of produced HONO after the depletion of antioxidants is the primary cause of HNO3 formation in the late stage of NP degradation, which results in the acid-catalyzed hydrolysis of NP into 2,2-dinitropropanol and acetic/formic acids. Our study has demonstrated that the aging temperature plays a crucial role in accelerating the formation and decomposition of HONO, which consequently increases the acidity of aged NP samples and hence accelerates the hydrolyzation of NP. Therefore, to prevent NP from undergoing rapid degradation, we suggest that the concentration of HNO3 should be maintained below 1.35 mM and the temperature under 38 °C.

Valve turning towards on-cycle in cobalt-catalyzed Negishi-type cross-coupling.

Ligands and additives are often utilized to stabilize low-valent catalytic metal species experimentally, while their role in suppressing metal deposition has been less studied. Herein, an on-cycle mechanism is reported for CoCl2bpy2 catalyzed Negishi-type cross-coupling. A full catalytic cycle of this kind of reaction was elucidated by multiple spectroscopic studies. The solvent and ligand were found to be essential for the generation of catalytic active Co(I) species, among which acetonitrile and bipyridine ligand are resistant to the disproportionation events of Co(I). Investigations, based on Quick-X-Ray Absorption Fine Structure (Q-XAFS) spectroscopy, Electron Paramagnetic Resonance (EPR), IR allied with DFT calculations, allow comprehensive mechanistic insights that establish the structural information of the catalytic active cobalt species along with the whole catalytic Co(I)/Co(III) cycle. Moreover, the acetonitrile and bipyridine system can be further extended to the acylation, allylation, and benzylation of aryl zinc reagents, which present a broad substrate scope with a catalytic amount of Co salt. Overall, this work provides a basic mechanistic perspective for designing cobalt-catalyzed cross-coupling reactions.

Liquid Chromatography Quadrupole Time-of-Flight Mass Spectrometry: A Strategy for Optimization, Characterization, and Quantification of Antioxidant Nitro Derivatives.

As an antioxidant, N-phenyl-ß-naphthylamine (PBNA) inhibits the activity of oxidants, such as NO x , to prevent the degradation of energetic materials. In the presence of NO x , nitrated products can be generated in the process potentially. To characterize nitrated PBNA in a nontargeted analysis of complex samples as such, liquid chromatography tandem quadrupole time-of-flight (LC-QTOF), as an excellent analytic technique, is used due to its high resolution and sensitivity. However, a systematic approach of instrumentation optimization, data interpretation, and quantitative determination of products is needed. Through a step-by-step evaluation of the instrumental parameters used in the Q0, Q1, and Q2 compartments of LC-QTOF, optimal ion yields of precursor ions and high-resolution MS2 fragmentation spectra at low mass defects were obtained in both negative and positive electrospray ionization modes. Through rationalization of the fragmentation pathways and verification using theoretical masses, the mononitro derivative of PBNA was accurately identified as N-(4-nitrophenyl)-naphthalen-2-amine and further confirmed using a reference standard. Using strict criteria provided by the analytical guidelines (e.g., SANTE), limit of quantitation, limit of detection, and calibration were established for the quantitation of PBNA and nitrated PBNA. From optimization to characterization and subsequent quantification of the mononitro-PBNA derivative, for the first time, the applicability of this strategy is demonstrated in the aged energetic binders.

Liquid Chromatography Quadrupole Time-of-Flight Mass Spectrometry Analysis of Eutectic Bis(2,2-dinitropropyl) Acetal/Formal Degradation Profile: Nontargeted Identification of Antioxidant Derivatives.

In the eutectic mixture of bis(2,2-dinitropropyl) acetal (BDNPA) and bis(2,2-dinitropropyl) formal (BDNPF), also known as nitroplasticizer (NP), n-phenyl-ß-naphthylamine (PBNA), an antioxidant, is used to improve the long-term storage of NP. PBNA scavenges nitrogen oxides (e.g., NO x radicals) that are evolved from NP decomposition, hence slowing down the degradation of NP. Yet, little is known about the associated chemical reaction between NP and PBNA. Herein, using liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF), we thoroughly characterize nitrated PBNA derivatives with up to five NO2 moieties in terms of retention time, mass verification, fragmentation pattern, and correlation with NP degradation. The propagation of PBNA nitration is found to depend on the temperature and acidity of the NP system and can be utilized as an indirect, yet reliable, means of determining the extent of NP degradation. At low temperatures (<55 °C), we find that the scavenging efficiency of PBNA is nullified when three NO2 moieties are added to PBNA. Hence, the dinitro derivative can be used as a reliable indicator for the onset of hydrolytic NP degradation. At elevated temperatures (≥55 °C) and especially in the dry environment, the trace amount of water in the condensed NP (<700 ppm) is essentially removed, which accelerates the production of reactive species (e.g., HONO, HNO3 and NO x ). In return, the increased acidity due to HNO3 formation catalyzes the hydrolysis of NP and PBNA nitro derivatives into 2,2-dinitropropanol (DNPOH) and nitrophenol/dinitrophenol, respectively.

Pfizer and Palbociclib in China: Analyzing an Oncology Pay-for-Performance Plan.

OBJECTIVES: China is poised to become the world's second-largest oncology drug market. Its ability to continue broadening health coverage is in question. Institutional innovations such as performance-based risk-sharing agreements (PBRSAs) have been developed to promote access to novel therapeutics beyond that provided by public health insurance and central procurement systems. We examine in depth the financial implications of a PBRSA developed in China for the breast cancer drug palbociclib. METHODS: We generated a 2-state Markov model from PBRSA information made publicly available. Model inputs included breast cancer outcomes data from the published literature. The primary analysis estimates the percentage reduction in overall drug expenditures due to the PBRSA. Sensitivity analyses explored the financial impact of varied computed tomography scan utilization, rebate rate, and rebate duration. RESULTS: Estimated palbociclib expenditures for the PBRSA cohort totaled $36 278 000. Based on the publicly available information for the PBRSA, an effective discount of 1.3% was estimated. The effective discount was insensitive to changes in computed tomography scan utilization. CONCLUSIONS: The palbociclib PBRSA likely had negligible impact on patient access to therapy and limited downstream financial impact to patients and payers. The short duration of the rebate window, small rebate, and disease indolence contributed to the low expected rebate percentage.

Scalable and selective deuteration of (hetero)arenes.

Isotope labelling, particularly deuteration, is an important tool for the development of new drugs, specifically for identification and quantification of metabolites. For this purpose, many efficient methodologies have been developed that allow for the small-scale synthesis of selectively deuterated compounds. Due to the development of deuterated compounds as active drug ingredients, there is a growing interest in scalable methods for deuteration. The development of methodologies for large-scale deuterium labelling in industrial settings requires technologies that are reliable, robust and scalable. Here we show that a nanostructured iron catalyst, prepared by combining cellulose with abundant iron salts, permits the selective deuteration of (hetero)arenes including anilines, phenols, indoles and other heterocycles, using inexpensive D2O under hydrogen pressure. This methodology represents an easily scalable deuteration (demonstrated by the synthesis of deuterium-containing products on the kilogram scale) and the air- and water-stable catalyst enables efficient labelling in a straightforward manner with high quality control.

Human embryonic stem cell-derived dopaminergic neurons reverse functional deficit in parkinsonian rats.

We show that human embryonic stem cell-derived dopaminergic neurons survived transplantation to the neurotoxin 6-hydroxydopamine-lesioned rat striatum and, in combination with the cells newly differentiated from their progenitors, contributed to locomotive function recovery at 5 months. The animal behavioral improvement was correlated with the dopamine neurons present in the graft. Although the donor cells contained forebrain and midbrain dopamine neurons, the dopamine neurons present in the graft mainly exhibited a midbrain, or nigra, phenotype, suggesting the importance of midbrain dopamine neurons in functional repair. Furthermore, progenies of grafted cells were neurons and glia with greatly diminished mitotic activity by 5 months. Thus, the in vitro-produced human dopamine neurons can functionally engraft in the brain.

[Expressions and time-dependent changes of FAK and phospho-FAK during skin incised wound healing in mouse].

OBJECTIVE: To study the expressions of focal adhesion kinase (FAK) and phospho-FAK( p-FAK) during skin incised wound healing and the applicability of time-dependent expressions of FAK and p-FAK. METHODS: The expression of FAK and p-FAK in cutaneous incised wound in mouse were investigated by immunohistochmeistry and Western blotting. RESULTS: FAK and p-FAK expression were detected in polymorphonuclear cells (PMNs) in the wound and adjacent regions 3 hours post-injury. The expressions of FAK and p-FAK were detected in a large number of infiltrating PMNs and some of mononuclear cells (MNCs) from 6 to 24 hours after injury. The MNCs and fibroblastic cells (FBCs) accounted for most part of the FAK and p-FAK positive cells from 3 to 14 days after injury. The numbers of FAK-positive cells increased continuously, reaching a peak at post-injury day 3, and then started to decrease from post-injury day 5 to 14. The changes of p-FAK-positive cells were similar to that of the FAKs, and reached a peak at 12 hours after injury. CONCLUSION: Both FAK and p-FAK displayed a time-dependent expression during skin incised wound healing in mouse, with p-FAK being superior to FAK. Both FAK and p-FAK may potentially be used as new markers for determination of the wound interval.

[Time-dependent expression of caspase-3 during contused skeletal muscle wound healing in rats].

OBJECTIVE: To investigate the expression of caspase-3 during contused skeletal muscle wound healing in rats and to explore the applicability of caspase-3 in wound age estimation. METHODS: Male Sprague-Dawley rats undergone anesthesia with 2% pentobarbital sodium (45 mg/kg) were struck by a single strike at the skeletal muscle of the right leg, then were sacrificed by cervical dislocation at different post-traumatic intervals. The changes of caspase-3 activity were assessed by imunohistochemistry, Western blot and caspase-3 colorimetric assay. The skeletal muscle of non-contusion rat's were used as controls. RESULTS: No caspase-3 was detected in skeletal muscle in the control group. The expression level of caspase-3 in the peripheral area of contused rat skeletal muscle increased gradually and maximized on the fifth day after injury, and then decreased gradually. Caspase-3 was also detected in the regenerated skeletal muscle within 7-14 days after injury. CONCLUSION: The expression of capase-3 in the peripheral area of contused rat skeletal muscle indicated that it may play a pivotal role in apoptosis of the wounded skeletal muscle and may be used as a marker for wound age estimation. The expression of capase-3 in regenerating skeletal muscle suggests that caspase-3 activity may be used for skeletal muscle differentiation.