Structural Design of 3D Current Collectors for Lithium Metal Anodes: A Review.

Due to the ultrahigh theoretical specific capacity (3860 mAh g-1) and low redox potential (-3.04 V vs. standard hydrogen electrode), Lithium (Li) metal anode (LMA) received increasing attentions. However, notorious dendrite and volume expansion during the cycling process seriously hinder the development of high energy density Li metal batteries. Constructing three-dimensional (3D) current collectors for Li can fundamentally solve the intrinsic drawback of hostless for Li. Therefore, this review systematically introduces the design and synthesis engineering and the current development status of different 3D collectors in recent years (the current collectors are divided into two major parts: metal-based current collectors and carbon-based current collectors). In the end, some perspectives of the future promotion for LMA application are also presented.

Construction of Bimetallic Heterojunction Based on Porous Engineering for High Performance Flexible Asymmetric Supercapacitors.

It remains a great challenge to design and manufacture battery-type supercapacitors with satisfactory flexibility, appropriate mechanical property, and high energy density under high power density. Herein, a concept of porous engineering is proposed to simply prepare two-layered bimetallic heterojunction with porous structures. This concept is successfully applied in fabrication of flexible electrode based on CuO-Co(OH)2 lamella on Cu-plated carbon cloth (named as CPCC@CuO@Co(OH)2 ). The unique structure brings the electrode a high specific capacity of 3620 mF cm-2 at 2 mA cm-2 and appropriate mechanical properties with Young's modulus of 302.0 MPa. Density functional theory calculations show that porous heterojunction provides a higher intensity of electron state density near the Fermi level (E-Ef  = 0 eV), leading to a highly conductive CPCC@CuO@Co(OH)2 electrode with both efficient charge transport and rapid ion diffusion. Notably, the supercapacitor assembled from CPCC@CuO@Co(OH)2 //CC@AC shows high energy density of 127.7 W h kg-1 at 750.0 W kg-1 , remarkable cycling performance (95.53% capacity maintaining after 10 000 cycles), and desired mechanical flexibility. The methodology and results in this work will accelerate the transformative developments of flexible energy storage devices in practical applications.

Carbonized Polymer Dots for Controlling Construction of MoS2 Flower-Like Nanospheres to Achieve High-Performance Li/Na Storage Devices.

Despite being one of the most promising materials in anode materials, molybdenum sulfide (MoS2 ) encounters certain obstacles, such as inadequate cycle stability, low conductivity, and unsatisfactory charge-discharge (CD) rate performance. In this study, a novel approach is employed to address the drawbacks of MoS2 . Carbon polymer dots (CPDs) are incorporated to prepare three-dimensional (3D) nanoflower-like spheres of MoS2 @CPDs through the self-assembly of MoS2 2D nanosheets, followed by annealing at 700 °C. The CPDs play a main role in the creation of the nanoflower-like spheres and also mitigate the MoS2 nanosheet limitations. The nanoflower-like spheres minimize volume changes during cycling and improve the rate performance, leading to exceptional rate performance and cycling stability in both Lithium-ion and Sodium-ion batteries (LIBs and SIBs). The optimized MoS2 @CPDs-2 electrode achieves a superb capacity of 583.4 mA h g-1 at high current density (5 A g-1 ) after 1000 cycles in LIBs, and the capacity remaining of 302.8 mA h g-1 after 500 cycles at 5 A g-1 in SIBs. Additionally, the full cell of LIBs/SIBs exhibits high capacity and good cycling stability, demonstrating its potential for practical application in fast-charging and high-energy storage.

Carbonized Polymer Dots with Controllable N, O Functional Groups as Electrolyte Additives to Achieve Stable Li Metal Batteries.

Electrolyte additive is an effective strategy to inhibit the uncontrolled growth of Li dendrites for lithium metal batteries (LMBs). However, most of the additives are complex synthesis and prone to decompose in cycling. Herein, in order to guide the homogeneous deposition of Li+ , carbonized polymer dots (CPDs) as electrolyte additives are successfully designed and synthesized by microwave (M-CPDs) and hydrothermal (H-CPDs) approaches. The controllable functional groups containing N or O (especially pyridinic-N, pyrrolic-N, and carboxyl group) enable CPDs to keep stable in electrolytes for at least 3 months. Meanwhile, the clusters formed between CPDs and Li+ through electrostatic interaction effectively guide the uniform Li dispersion and limit the "tip effect" and dendrite formation. Moreover, as lithiophilic groups increase, the strong electrostatic interference for the solvation effect of Li+ in the electrolyte is formed, which induces faster Li+ diffusion/transfer. As expected, H-CPDs achieve the ultra-even Li+ transfer. The corresponding Li//LiFePO4 full cell delivers a high capacity retention rate of 93.8% after 200 cycles, which is much higher than that of the cells without additives (61.2%) and with M-CPDs (83.7%) as additives. The strategy in this work provides a theoretical direction for CPDs as electrolyte additives used in energy storage devices.

Manipulation of the LiZn Alloy Process toward High-Efficiency Lithium Metal Anodes.

Synthesis of alloy-type materials (X) is one of the most effective approaches to limit lithium dendrites in Li metal anode (LMA) because of their satisfactory lithiophilicity and easy electrochemical reaction with lithium. However, current investigations have only focused on the influence of the resulting alloyed products (LiX) on the properties of LMA, but the alloying reaction process between Li+ and X has been mostly ignored. Herein, by masterly taking advantage of the alloying reaction process, a novel approach is developed to more effectively inhibit lithium dendrites than the conventional strategy that just considers the utilization of alloyed products LiX. A three-dimensional substrate material loaded with metallic Zn on the surface of Cu foam is synthesized by a simple electrodeposition process. During Li plating/stripping, both alloy reaction processes between Li+ and Zn and LiZn product are involved, which makes the disordered Li+ flux near the substrate first react with Zn metal and then results in an even Li+ concentration for more uniform Li nucleation and growth. The full cell (Li-Cu@Zn-15//LFP) exhibits the reversible capacity of 122.5 mAh g-1, and a high capacity retention of 95% is achieved after 180 cycles. This work proposes a valuable concept for the development of alloy-type materials in energy storage devices.