High-performance K-ion half/full batteries with superb rate capability and cycle stability.

SignificanceThe present work might be significant for exploring advanced K-ion batteries with superb rate capability and cycle stability toward practical applications. The as-assembled K-ion half cell exhibits an excellent rate capability of 428 mA h g-1 at 100 mA g-1 and a high reversible specific capacity of 330 mA h g-1 with 120% specific capacity retention after 2,000 cycles at 2,000 mA g-1, which is the best among those based on carbon materials. The as-constructed full cell delivers 98% specific capacity retention over 750 cycles at 500 mA g-1, superior to most of those based on carbon materials that have been reported thus far.

Highly-Efficient and Robust Zn Anodes Enabled by Sub-1-µm Zincophilic CrN Coatings.

For exploring advanced Zn-ion batteries (ZIBs) with long lifespan and high Coulombic efficiency (CE), the critically important point is to limit the undesired Zn dendrite and parasitic reactions. Among the coating for electrode is a promising strategy, relying on the trade-off between its thickness and stability to achieve the ultra-stable Zn anodes in ZIBs. Herein, a submicron-thick (≈0.4 µm) zincophilic CrN coatings are fabricated by a facile and industry-compatible magnetron sputtering approach. It is exhilarating that the ultrathin and dense CrN coatings with strong adsorption ability for Zn2+ exhibit an impressive lifespan up to 3700 h with ≈100% CE at 1 mA cm-2. Along with the experiments and theoretical calculations, it is verified that the introduced CrN coatings cannot only effectively suppress the dendrite growth and notorious parasitic reactions, but also allow the uniform Zn deposition due to the reduced nucleation energy. Moreover, the as-assembled Zn@CrN‖MnO2 full cell delivers a high specific capacity of 171.1 mAh g-1 after 1000 cycles at 1 A g-1, much better than that of Zn‖MnO2 analog (97.8 mAh g-1). This work provides a facile strategy for scalable fabrication of ultrathin zincophilic coating to push forward the practical applications of ZIBs.

Zn-Leaching Induced Rapid Self-Reconstruction of NiFe-Layered Double Hydroxides for Boosted Oxygen Evolution Reaction.

Optimizing the active centers through reconstruction is recognized as the key to construct high-performance oxygen evolution reaction (OER) catalysts. Herein, a simple and rapid in situ leaching strategy to promote the self-reconstruction of NiFe-layered double hydroxides (LDHs) catalysts is reported. The trace Zn dopants are introduced in advance by a facile and one-step hydrothermal method, followed by leaching over the electrochemical activation process, which can remarkably reduce the formation potential of NiFeOOH active centers to enable the deeper self-reconstruction for the formation of abundant highly active centers. Moreover, the self-restructured NiFeOOH-VZn cannot only significantly lower the dehydrogenation energy barrier for the transformation from Ni(OH)2 to NiOOH, but also decrease the free energy barrier of rate determining step for the *OH converted to *O through a deprotonation process, thus significantly boosting the OER behaviors. As a proof of concept, the obtained NiFeOOH-VZn catalyst just requires a low overpotential of 240 mV at 10 mA cm-2, and delivers robust stability at 50 mA cm-2 over 120 h, which outperforms the benchmark of noble metal RuO2 and those of most non-noble metal catalysts ever reported.

High-Sensitivity Photoelectrochemical Ultraviolet Photodetector with Stable pH-Universal Adaptability Based on Whole Single-Crystal Integrated Self-Supporting 4H-SiC Nanoarrays.

Emerging photoelectrochemical (PEC) photodetectors (PDs) have notable advantages over conventional PDs and have attracted extensive attention. However, harsh liquid environments, such as those with high corrosivity and attenuation, substantially restrict their widespread application. Moreover, most PEC PDs are constructed by assembling numerous nanostructures on current collector substrates, which inevitably contain abundant interfaces and defects, thus greatly weakening the properties of PDs. To address these challenges, a high-performance pH-universal PEC ultraviolet (UV) PD based on a whole single-crystal integrated self-supporting 4H-SiC nanopore array photoelectrode is constructed, which is fabricated using a two-step anodic oxidation approach. The PD exhibits excellent photodetection behavior, with high responsivity (218.77 mA W-1), detectivity (6.64 × 1013 Jones), external quantum efficiency (72.47%), and rapid rise/decay times (17/48 ms) under 375 nm light illumination with a low intensity of 0.15 mW cm-2 and a bias voltage of 0.6 V, which is fall in the state-of-the-art of the wide-bandgap semiconductor-based PDs reported thus far. Furthermore, the SiC PEC PD exhibits excellent photoresponse and long-term operational stability in pH-universal liquid environments. The improved photodetection performance of the SiC PEC PD is primarily attributed to the synergistic effect of the nanopore array structure, integrated self-supporting configuration, and single-crystal structure of the whole photoelectrode.

Enabling Rapid and Stable Sodium Storage via a P2-Type Layered Cathode with High-Voltage Zero-Phase Transition Behavior.

Currently, a major target in the development of Na-ion batteries is the concurrent attainment of high-rate capacity and long cycling stability. Herein, an advanced Na-ion battery with high-rate capability and long cycle stability based on Li/Ti co-doped P2-type Na0.67 Mn0.67 Ni0.33 O2 , a host material with high-voltage zero-phase transition behavior and fast Na+ migration/conductivity during dynamic de-embedding process, is constructed. Experimental results and theoretical calculations reveal that the two-element doping strategy promotes a mutually reinforcing effect, which greatly facilitates the transfer capability of Na+ . The cation Ti4+ doping is a dominant high voltage, significantly elevating the operation voltage to 4.4 V. Meanwhile, doping Li+ shows the function in charge transfer, improving the rate performance and prolonging cycling lifespan. Consequently, the designed P2-Na0.75 Mn0.54 Ni0.27 Li0.14 Ti0.05 O2 cathode material exhibits discharge capacities of 129, 104, and 85 mAh g- 1 under high voltage of 4.4 V at 1, 10, and 20 C, respectively. More importantly, the full-cell delivers a high initial capacity of 198 mAh g-1 at 0.1 C (17.3 mA g-1 ) and a capacity retention of 73% at 5 C (865 mA g-1 ) after 1000 cycles, which is seldom witnessed in previous reports, emphasizing their potential applications in advanced energy storage.

High energy density and extremely stable supercapacitors based on carbon aerogels with 100% capacitance retention up to 65,000 cycles.

In terms of ideal future energy storage systems, besides the always-pursued energy/power characteristics, long-term stability is crucial for their practical application. Here, we report a facile and sustainable strategy for the scalable fabrication of carbon aerogels with three-dimensional interconnected nanofiber networks and rationally designed hierarchical porous structures, which are based on the carbonization of bacterial cellulose assisted by the soft template of Zn-1,3,5-benzenetricarboxylic acid. As binder-free electrodes, they deliver a fundamentally enhanced specific capacitance of 352 F ⋅ g-1 at 1 A ⋅ g-1 in a wide potential window (1.2 V, 6 M KOH) in comparison with those of bacterial cellulose-derived carbons (178 F ⋅ g-1) and most activated carbons (usually lower than 250 F ⋅ g-1). The as-assembled supercapacitors exhibit an ultrahigh capacitance of 297 F ⋅ g-1 at 1 A ⋅ g-1, remarkable energy density (14.83 Wh ⋅ kg-1 at 0.60 kW ⋅ kg-1), and extremely high stability, with 100% capacitance retention for up to 65,000 cycles at 6 A ⋅ g-1, representing their superior energy storage performance when compared with that of state-of-the-art supercapacitors of commercial activated carbons and biomass-derived analogs.

Robust high-temperature potassium-ion batteries enabled by carboxyl functional group energy storage.

The popularly reported energy storage mechanisms of potassium-ion batteries (PIBs) are based on alloy-, de-intercalation-, and conversion-type processes, which inevitably lead to structural damage of the electrodes caused by intercalation/de-intercalation of K+ with a relatively large radius, which is accompanied by poor cycle stabilities. Here, we report the exploration of robust high-temperature PIBs enabled by a carboxyl functional group energy storage mechanism, which is based on an example of p-phthalic acid (PTA) with two carboxyl functional groups as the redox centers. In such a case, the intercalation/de-intercalation of K+ can be performed via surface reactions with relieved volume change, thus favoring excellent cycle stability for PIBs against high temperatures. As proof of concept, at the fixed working temperature of 62.5 °C, the initial discharge and charge specific capacities of the PTA electrode are ∼660 and 165 mA⋅h⋅g-1, respectively, at a current density of 100 mA⋅g-1, with 86% specific capacity retention after 160 cycles. Meanwhile, it delivers 81.5% specific capacity retention after 390 cycles under a high current density of 500 mA⋅g-1 The cycle stabilities achieved under both low and high current densities are the best among those of high-temperature PIBs reported previously.

Improving Out-of-Plane Charge Mobility and Phase Stability of Dion-Jacobson Lead-Free Perovskites via Intercalating π-Conjugated Aromatic Spacers.

The layered quasi-2D perovskites are recognized as one of the effective strategies to resolve the big problem of intrinsic phase instability of the perovskites. However, in such configurations, their performance is fundamentally limited due to the correspondingly weakened out-of-plane charge mobility. Herein, the π-conjugated p-phenylenediamine (PPDA) is introduced as organic ligand ions for rationally designing lead-free and tin-based 2D perovskites with the aid of theoretical computation. It is evidenced that both out-of-plane charge transport capacity and stability can be significantly enhanced within as-established quasi-2D Dion-Jacobson (DJ) (PPDA)Csn -1 Snn I3 n +1 perovskites. The obviously increased electrical conductivity and reduced carrier effective masses are attributed to the enhanced interlayer interactions, limited structural distortions of diamine cations, as well as improved orbital coupling between Sn2+ and I- ions of (PPDA)Csn -1 Snn I3 n +1 perovskites. Accordingly, by dimension engineering of the inorganic layer (n), the bandgap (Eg ) of quasi-2D perovskites can be linearly tailored toward the suitable Eg (1.387 eV) with optimal photoelectric conversion efficiency (PCE) of 18.52%, representing their great potential toward promising applications in advanced solar cells.

Microwave-Assisted Synthesis of Highly Active Single-Atom Fe/N/C Catalysts for High-Performance Aqueous and Flexible All-Solid-State Zn-Air Batteries.

The development of low-cost single-atom electrocatalysts for oxygen reduction reaction (ORR) is highly desired but remains a grand challenge. Superior to the conventional techniques, a microwave-assisted strategy is reported for rapid production of high-quality Fe/N/C single-atom catalysts (SACs) with profoundly enhanced reaction rate and remarkably reduced energy consumption. The as-synthesized catalysts exhibit an excellent ORR performance with a positive half-wave potential up to 0.90 V, a high turnover frequency of 0.76 s-1 , as well as a satisfied stability with a lost half-wave potential of just 27 mV over 9000 cycles (much better than that of Pt/C with 107 mV lost) and good methanol resistance. The open-circuit voltages of as-constructed aqueous and flexible all-solid-state Zn-air batteries (ZABs) are 1.56 and 1.52 V, respectively, higher than those of 20% Pt/C-based ones (i.e., 1.43 and 1.38 V, respectively). Impressively, they afford a peak power density of 235 mW cm-2 , which exceeds that of Pt/C (i.e., 186 mW cm-2 ), and is comparable to the best ones of Fe/N/C-based ZABs ever reported.

Enhanced Hygrothermal Stability of In-Situ-Grown MAPbBr3 Nanocrystals in Polymer with Suppressed Desorption of Ligands.

Currently, the intrinsic instability of organic-inorganic hybrid perovskite nanocrystals (PNCs) at high temperature and high humidity still stands as a big barrier to hinder their potential applications in optoelectronic devices. Herein, we report the controllable in-situ-grown PNCs in polyvinylidene fluoride (PVDF) polymer with profoundly enhanced hygrothermal stability. It is found that the introduced tetradecylphosphonic acid (TDPA) ligand enables significantly improved binding to the surface of PNCs via a strong covalently coordinated P-O-Pb bond, as evidenced by density functional theory calculations and X-ray photoelectron spectroscopy analyses. Accordingly, such enhanced binding could not only make efficient passivation of the surface defects of PNCs but also enable the remarkably suppressed desorption of the ligand from the PNCs under high-temperature environments. Consequently, the photoluminescence quantum yield (PL QY) of the as-fabricated MAPbBr3-PNCs@PVDF film exhibits almost no decay after exposure to air at 333 K over 1800 h. Once the temperatures are increased from 293 to 353 K, their PL intensity can be kept as 88.6% of the initial value, much higher than that without the TDPA ligand (i.e., 42.4%). Moreover, their PL QY can be maintained above 50% over 1560 h (65 days) under harsh working conditions of 333 K and 90% humidity. As a proof of concept, the as-assembled white light-emitting diodes display a large color gamut of 125% National Television System Committee standard, suggesting their promising applications in backlight devices.

Highly Efficient and Selective Visible-Light Driven Photoreduction of CO2 to CO by Metal-Organic Frameworks-Derived NiCoO Porous Microrods.

Photocatalytic CO2 reduction by solar energy into carbonaceous feedstock chemicals is recognized as one of the effective ways to mitigate both the energy crisis and greenhouse effect, which fundamentally relies on the development of advanced photocatalysts. Here, the exploration of porous microrod photocatalysts based on novel NiCoO solid solutions derived from bimetallic metal-organic frameworks (MOFs) is reported. They exhibit overall enhanced photocatalytic performance with both high activity and remarkable selectivity for reducing CO2 into CO under visible-light irradiation, which are superior to most related photocatalysts reported. Accordingly, the Ni0.2 -Co0.8 -O microrod (MR-N0.2 C0.8 O) photocatalyst delivers high efficiency for photocatalytic CO2 reduction into CO at a rate up to ≈277 µmol g-1 h-1 , which is ≈35 times to that of its NiO counterpart. Furthermore, they display a high selectivity of ≈85.12%, which is not only better than that of synthesized Co3 O4 (61.25%) but also superior to that of reported Co3 O4 -based photocatalysts. It is confirmed that the Co and Ni species are responsible for CO2 CO conversion activity and selectivity, respectively. In addition, it is verified, by adjusting the Ni contents, that the band structure of NiCoO microrods can be tailored with favorable reduction band potentials, which thus enhance the selectivity toward CO2 photoreduction.

MOFs-Derived Fusiform In2 O3 Mesoporous Nanorods Anchored with Ultrafine CdZnS Nanoparticles for Boosting Visible-Light Photocatalytic Hydrogen Evolution.

The development of efficient visible-light-driven photocatalysts is one of the critically important issues for solar hydrogen production. Herein, high-efficiency visible-light-driven In2 O3 /CdZnS hybrid photocatalysts are explored by a facile oil-bath method, in which ultrafine CdZnS nanoparticles are anchored on NH2 -MIL-68-derived fusiform In2 O3 mesoporous nanorods. It is disclosed that the as-prepared In2 O3 /CdZnS hybrid photocatalysts exhibit enhanced visible-light harvesting, improves charges transfer and separation as well as abundant active sites. Correspondingly, their visible-light-driven H2 production rate is significantly enhanced for more than 185 times to that of pristine In2 O3 nanorods, and superior to most of In2 O3 -based photocatalysts ever reported, representing their promising applications in advanced photocatalysts.

CsPbI3 Nanotube Photodetectors with High Detectivity.

In the present work, the exploration of photodetectors (PDs) based on CsPbI3 nanotubes are reported. The as-prepared CsPbI3 nanotubes can be stable for more than 2 months under air conditions. It is found that, in comparison to the nanowires, nanobelts, and nanosheets, the nanotubes can be advantageous to be used as the functional units for PDs, which is mainly attributed to the enhanced light absorption ability induced by the light trapping effect within the tube cavity. As a proof of concept, the as-constructed PDs based on CsPbI3 nanotube present an overall excellent performance with a responsivity (Rλ ), external quantum efficiency (EQE) and detectivity of 1.84 × 103 A W-1 , 5.65 × 105 % and 9.99 × 1013 Jones, respectively, which are all comparable to state-of-the-art ones for all-inorganic perovskite PDs.

A molecular approach to magnetic metallic nanostructures from metallopolymer precursors.

In recent years, metallopolymers have attracted much attention as precursors to generate magnetic metal/metal alloy nanoparticles (NPs) through pyrolysis or photolysis because they offer the advantages of ease of solution processability, atomic level mixing and stoichiometric control over composition. The as-generated NPs usually possess narrow size distributions with precise control of composition and density per unit area. Moreover, patterned NPs can be achieved on various substrates in this way owing to the good film-forming property of metallopolymers and such work is important for many applications based on metal nanostructures. By combining the merits of both the solution processability of metallopolymers and nanoimprint lithography (NIL), a new platform can be created for fabricating bit-patterned media (BPM) and the next-generation of nanoscale ultra-high-density magnetic data storage devices. Furthermore, most of these metallopolymers can be used directly as a negative-tone resist to generate magnetic metallic nanostructures by electron-beam lithography and UV photolithography. Self-assembly and subsequent pyrolysis of metalloblock copolymers can also afford well-patterned magnetic metal or metal alloy NPs in situ with periodicity down to dozens of nanometers. In this review, we highlight the use of metallopolymer precursors for the synthesis of magnetic metal/metal alloy NPs and their nanostructures and the related applications.

General Strategy for Rapid Production of Low-Dimensional All-Inorganic CsPbBr3 Perovskite Nanocrystals with Controlled Dimensionalities and Sizes.

Currently, all-inorganic CsPbX3 (X = Br, I, Cl) perovskite nanocrystals (NCs) are shining stars with exciting potential applications in optoelectronic devices such as solar cells, light-emitting diodes, lasers, and photodetectors, due to their superior performance in comparison to their organic-inorganic hybrid counterparts. In the present work, we report a general strategy based on a microwave technique for the rapid production of low-dimensional all-inorganic CsPbBr3 perovskite NCs with tunable morphologies within minutes. The effect of the key parameters such as the introduced ligands, solvents, and PbBr2 precursors and microwave powers as well as the irradiation times on the production of perovskite NCs was systematically investigated, which allowed their growth with tunable dimensionalities and sizes. As a proof of concept, the ratio of OA to OAm as well as the concentration of PbBr2 precursor played important roles in triggering the anisotropic growth of the perovskite NCs, favoring their growth into 1D/2D single-crystalline nanostructures. Meanwhile, their sizes could be tailored by controlling the microwave powers and irradiation times. The mechanism for the tunable growth of perovskite NCs is discussed.

Shape-Enhanced Photocatalytic Activities of Thoroughly Mesoporous ZnO Nanofibers.

1D mesoporous materials have attracted extensive interest recently, owning to their fascinating properties and versatile applications. However, it remains as a grand challenge to develop a simple and efficient technique to produce oxide nanofibers with mesoporous architectures, controlled morphologies, large surface areas, and optimal performances. In this work, a facile foaming-assisted electrospinning strategy with foaming agent of tea saponin is used to produce thoroughly mesoporous ZnO nanofibers with high purity and controlled morphology. Interestingly, mesoporous fibers with elliptical cross-section exhibit the significantly enhanced photocatalytic activity for hydrogen production, as compared to the counterparts with circular and rectangular cross-sections, and they also perform better than the commercial ZnO nanopowders. The unexpected shape dependence of photocatalytic activities is attributed to the different stacking modes of the mesoporous fibers, and a geometrical model is developed to account for the shape dependence. This work represents an important step toward producing thoroughly mesoporous ZnO nanofibers with tailored morphologies, and the discovery that fibers with elliptical cross-section render the best performance provides a valuable guideline for improving the photocatalytic performance of such mesoporous nanomaterials.

General strategy for fabricating thoroughly mesoporous nanofibers.

Recently, preparation of mesoporous fibers has attracted extensive attentions because of their unique and broad applications in photocatalysis, optoelectronics, and biomaterials. However, it remains a great challenge to fabricate thoroughly mesoporous nanofibers with high purity and uniformity. Here, we report a general, simple and cost-effective strategy, namely, foaming-assisted electrospinning, for producing mesoporous nanofibers with high purity and enhanced specific surface areas. As a proof of concept, the as-fabricated mesoporous TiO2 fibers exhibit much higher photocatalytic activity and stability than both the conventional solid counterparts and the commercially available P25. The abundant vapors released from the introduced foaming agents are responsible for the creation of pores with uniform spatial distribution in the spun precursor fibers. The present work represents a critically important step in advancing the electrospinning technique for generating mesoporous fibers in a facile and universal manner.

Concurrently boosted oxygen reduction/evolution electrocatalysis over highly loaded CoNi/onion-like carbon hybrid nanosheets.

Balancing the bicatalytic activities and stabilities between oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is a critical yet challenging task for exploring advanced rechargeable Zinc-air batteries (ZABs). Herein, a hybrid nanosheet catalyst with highly dispersed and densified metallic species is developed to boost the kinetics and stabilities of both ORR and OER concurrently. Through a progressive coordination and pyrolysis approach, we directly prepared highly conductive onion-like carbon (OLC) accommodating dense ORR-active CoNC species and enveloping high-loading OER-active CoNi-synergic structures within a porous lamellar architecture. The resultant CoNi/OLC nanosheet catalyst delivers better ORR and OER activities showcasing a smaller reversible oxygen electrode index (ΔE = Ej10 - E1/2) of 0.71 V, compared to state-of-the-art Pt/C-RuO2 catalysts (0.75 V), Co/amorphous carbon polyhedrons (0.80 V), NiO nanoparticles with higher Ni loading (1.00 V), and most CoNi-based bifunctional catalysts reported so far. The rechargeable ZAB assembled with the developed catalyst achieves a remarkable peak power density of 270.3 mW cm-2 (172 % of that achieved by Pt/C + RuO2) and ultrahigh cycling stability with a negligible increase in voltage gap after 800 h (110 mV increase after 200 h for a Pt/C + RuO2-based battery), standing the top level of those ever reported.

Are formation and adsorption energies enough to evaluate the stability of surface-passivated tin-based halide perovskites?

Surface passivation is one of the effective and widely-used strategies to enhance the stability of halide perovskites with reduced surface defects and suppressed hysteresis. Among all existing reports, the formation and adsorption energies are popularly used as the decisive descriptors for screening passivators. Here, we propose that the often-ignored local surface structure should be another critically important factor governing the stability of tin-based perovskites after surface passivation, but has no detrimental effect on the stability of lead-based perovskites. It is verified that poor surface structure stability and deformation of the chemical bonding framework of Sn-I caused by surface passivation are ascribed to the weakened Sn-I bond strength and facilitated formation of surface iodine vacancy (VI). Therefore, the surface structure stability represented by the formation energy of VI and Sn-I bond strength should be used to accurately screen preferred surface passivators of tin-based perovskites.

Energy Level Matching and Band Edge Reconfiguration for Enhanced Charge Transport in Dion-Jacobson 3D/2D Perovskite Heterojunctions.

Generally, the 2D CsPbI3 layer capping on 3D counterparts has been considered as an effective strategy for both enhancing photovoltaic efficiency and stability. However, the intrinsically poor out-of-plane charge transport through the 2D layer remarkably hinders the overall performance of solar devices. To overcome such a challenge, we report the rationally designed 3D-CsPbI3/2D-(PYn)PbI4 (n = 1-4) heterojunctions with desirable energy level matching. It is evidenced that the valence band (VB) edge reconfiguration would occur with the increase of n, accompanied by the VB maximum (VBM) of the 2D component moving down from the higher level above that of the 3D component to the underneath. Consequently, the as-constructed 3D/2D-(PYn)PbI4 (n = 1, 2) heterojunctions exhibit optimal energy level matching, with accelerated transport of holes from 3D to 2D component and limited backflow of electrons. These findings might provide some meaningful insights on the energy level matching in 3D/2D perovskite heterojunctions.