Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 16 de 16
Filtrar
1.
J Synchrotron Radiat ; 31(Pt 1): 55-64, 2024 Jan 01.
Artículo en Inglés | MEDLINE | ID: mdl-37930257

RESUMEN

X-ray photon correlation spectroscopy (XPCS) holds strong promise for observing atomic-scale dynamics in materials, both at equilibrium and during non-equilibrium transitions. Here an in situ XPCS study of the relaxor ferroelectric PbMg1/3Nb2/3O3 (PMN) is reported. A weak applied AC electric field generates strong response in the speckle of the diffuse scattering from the polar nanodomains, which is captured using the two-time correlation function. Correlated motions of the Bragg peak are also observed, which indicate dynamic tilting of the illuminated volume. This tilting quantitatively accounts for the observed two-time speckle correlations. The magnitude of the tilting would not be expected solely from the modest applied field, since PMN is an electrostrictive material with no linear strain response to the field. A model is developed based on non-uniform static charging of the illuminated surface spot by the incident micrometre-scale X-ray beam and the electrostrictive material response to the combination of static and dynamic fields. The model qualitatively explains the direction and magnitude of the observed tilting, and predicts that X-ray-induced piezoresponse could be an important factor in correctly interpreting results from XPCS and nanodiffraction studies of other insulating materials under applied AC field or varying X-ray illumination.

2.
Nano Lett ; 23(1): 1-7, 2023 01 11.
Artículo en Inglés | MEDLINE | ID: mdl-36541700

RESUMEN

Developing new methods that reveal the structure of electrode materials under polarization is key to constructing robust structure-property relationships. However, many existing methods lack the spatial resolution in structural changes and fidelity to electrochemical operating conditions that are needed to probe catalytically relevant structures. Here, we combine a nanopipette electrochemical cell with three-dimensional X-ray Bragg coherent diffractive imaging to study how strain in a single Pt grain evolves in response to applied potential. During polarization, marked changes in surface strain arise from the Coulombic attraction between the surface charge on the electrode and the electrolyte ions in the electrochemical double layers, while the strain in the bulk of the crystal remains unchanged. The concurrent surface redox reactions have a strong influence on the magnitude and nature of the strain changes under polarization. Our studies provide a powerful blueprint to understand how structural evolution influences electrochemical performance at the nanoscale.


Asunto(s)
Electrodos , Oxidación-Reducción
3.
Nano Lett ; 21(14): 5945-5951, 2021 07 28.
Artículo en Inglés | MEDLINE | ID: mdl-34251215

RESUMEN

Strain is known to enhance the activity of the oxygen reduction reaction in catalytic platinum alloy nanoparticles, whose inactivity is the primary impediment to efficient fuel cells and metal-air batteries. Bragg coherent diffraction imaging (BCDI) was employed to reveal the strain evolution during the voltammetric cycling in Pt-Ni alloy nanoparticles composed of Pt2Ni3, Pt1Ni1, and Pt3Ni2. Analysis of the 3D strain images using a core-shell model shows that the strain as large as 5% is induced on Pt-rich shells due to Ni dissolution. The composition dependency of the strain on the shells is in excellent agreement with that of the catalytic activity. The present study demonstrates that BCDI enables quantitative determination of the strain on alloy nanoparticles during electrochemical reactions, which provides a means to exploit surface strain to design a wide range of electrocatalysts.


Asunto(s)
Aleaciones , Nanopartículas , Catálisis , Oxidación-Reducción , Platino (Metal)
4.
Nano Lett ; 20(12): 8541-8548, 2020 Dec 09.
Artículo en Inglés | MEDLINE | ID: mdl-33174748

RESUMEN

Fundamental understanding of structural changes during catalytic reactions is crucial to understanding the underlying mechanisms and optimizing efficiencies. Surface energy and related catalytic mechanisms are widely studied. However, the catalyst lattice deformation induced by catalytic processes is not well understood. Here, we study the strain in an individual platinum (Pt) nanoparticle (NP) using Bragg coherent diffraction imaging under in situ oxidation and reduction reactions. When Pt NPs are exposed to H2O2, a typical oxidizer and an intermediate during the oxygen reduction reaction process, alternating overall strain distribution near the surface and inside the NP is observed at the (111) Bragg reflection. In contrast, relatively insignificant changes appear in the (200) reflection. Density functional theory calculations are employed to rationalize the anisotropic lattice strain in terms of induced stress by H2O2 adsorption and decomposition on the Pt NP surface. Our study provides deeper insight into the activity-structure relationship in this system.

5.
Phys Rev Lett ; 123(24): 246001, 2019 Dec 13.
Artículo en Inglés | MEDLINE | ID: mdl-31922849

RESUMEN

Bimetallic catalysts can undergo segregation or redistribution of the metals driven by oxidizing and reducing environments. Bragg coherent diffraction imaging (BCDI) was used to relate displacement fields to compositional distributions in crystalline Pt-Rh alloy nanoparticles. Three-dimensional images of internal composition showed that the radial distribution of compositions reverses partially between the surface shell and the core when gas flow changes between O_{2} and H_{2}. Our observation suggests that the elemental segregation of nanoparticle catalysts should be highly active during heterogeneous catalysis and can be a controlling factor in synthesis of electrocatalysts. In addition, our study exemplifies applications of BCDI for in situ 3D imaging of internal equilibrium compositions in other bimetallic alloy nanoparticles.

6.
Chem Rec ; 19(7): 1220-1232, 2019 Jul.
Artículo en Inglés | MEDLINE | ID: mdl-30251465

RESUMEN

We will review structures and dynamics of electrode interfaces studied in situ using x-ray scattering and imaging techniques. The examples cover single-crystal and nanocrystal structures relevant to electrocatalytic activities, anodic oxidation and corrosion, aqueous dissolution reactions, surface reconstructions, and surface modifications by under potential deposition. The x-ray techniques include the widely used traditional surface x-ray scattering, such as crystal truncation rods and x-ray reflectivity, as well as recently developed resonance surface scattering, coherent surface x-ray photon correlation spectroscopy, coherent x-ray Bragg diffraction imaging, and surface ptychography. Results relevant to various electrochemical phenomena will be highlighted.

7.
Phys Chem Chem Phys ; 17(26): 16682-7, 2015 Jul 14.
Artículo en Inglés | MEDLINE | ID: mdl-26076726

RESUMEN

The applied potential dependent rate of atomic step motion of the Ag(001) surface in weak NaF electrolyte has been measured using a new extension of the technique of X-ray Photon Correlation Spectroscopy (XPCS). For applied potentials between hydrogen evolution and oxidation, the surface configuration completely changes on timescales of 10(2)-10(4) seconds depending upon the applied potential. These dynamics, directly measured over large areas of the sample surface simultaneously, are related to the surface energy relative to over or under potential. Concurrent specular X-ray scattering measurements reveal how the ordering of the water layers at the interface correlates with the dynamics.

8.
J Chem Phys ; 136(4): 044704, 2012 Jan 28.
Artículo en Inglés | MEDLINE | ID: mdl-22299911

RESUMEN

We observed an epitaxial, air-stable, partially registered (2 × 1) oxide bilayer on Pt (001) nanofacets [V. Komanicky, A. Menzel, K.-C. Chang, and H. You, J. Phys. Chem. 109, 23543 (2005)]. The bilayer is made of two half Pt layers; the top layer has four oxygen bonds and the second layer two. The positions and oxidation states of the Pt atoms are determined by analyzing crystal truncation rods and resonance scattering data. The positions of oxygen atoms are determined by density functional theory (DFT) calculations. Partial registry on the nanofacets and the absence of such registry on the extended Pt (001) surface prepared similarly are explained in DFT calculations by strain relief that can be accommodated only by nanoscale facets.

9.
Chem Mater ; 5042020.
Artículo en Inglés | MEDLINE | ID: mdl-33311853

RESUMEN

Self-terminated electrochemical deposition is used to grow Pt nanoparticles on tungsten monocarbide (WC) from a pH 4 electrolyte of 3 mmol/L K2PtCl4-0.5 mol/L NaCl. An unconventional potentiodynamic deposition program is used where nucleation is promoted at large overpotentials followed by growth termination at still larger overpotentials to yield a high coverage of Pt nanoparticles. Following three deposition cycles between -0.8 VSCE and -0.45 VSCE, the surface is covered by a monolayer equivalent charge of Pt in the form of ≈3 × 1011 particles/cm2 that are ≈6.7 ± 1.1 nm in diameter. The number and size of nanoparticles increase monotonically for five deposition cycles. Area-normalized kinetics for hydrogen evolution (HER) and oxidation (HOR) on Pt-WC were determined in 0.5 mol/L H2SO4. For the lowest surface coverage of Pt nanoparticles on WC, ≈ 0.01, an exchange current density of ≈ 100 mA/cm2 is achieved, comparable to the highest reported values for Pt nanoparticles and ultramicroelectrodes. The area normalized apparent exchange current density decreases with increasing Pt coverage as the relative contribution of point versus planar diffusion decreases. Self-terminated electrodeposition of Pt provides an attractive approach to achieving ultra-low loadings of well-dispersed Pt nanoparticles on a non-precious metal support like WC.

10.
J Am Chem Soc ; 131(16): 5732-3, 2009 Apr 29.
Artículo en Inglés | MEDLINE | ID: mdl-19348484

RESUMEN

We produced millions of morphologically identical platinum catalyst nanoparticles in the form of ordered arrays epitaxially grown on (111), (100), and (110) strontium titanate substrates using electron beam lithography. The ability to design, produce, and characterize the catalyst nanoparticles allowed us to relate microscopic morphologies with macroscopic catalytic reactivities. We evaluated the activity of three different arrays containing different ratios of (111) and (100) facets for an oxygen-reduction reaction, the most important reaction for fuel cells. Increased catalytic activity of the arrays points to a possible cooperative interplay between facets with different affinities to oxygen. We suggest that the surface area of (100) facets is one of the key factors governing catalyst performance in the electrochemical reduction of oxygen molecules.

11.
J Am Chem Soc ; 131(22): 7654-61, 2009 Jun 10.
Artículo en Inglés | MEDLINE | ID: mdl-19489644

RESUMEN

The influence of temperature changes in water-based electrolytes on the atomic structure at the electrochemical interface has been studied using in situ surface X-ray scattering (SXS) in combination with cyclic voltammetry. Results are presented for the potential-dependent surface reconstruction of Au(100), the adsorption and ordering of bromide anions on the Au(100) surface, and the adsorption and oxidation of CO on Pt(111) in pure HClO(4) and in the presence of anions. These systems represent a range of structural phenomena, namely metal surface restructuring and ordering transitions in both nonreactive spectator species and reactive adsorbate layers. The key effect of temperature appears to be in controlling the kinetics of the surface reactions that involve oxygenated species, such as hydroxyl adsorption and oxide formation. The results indicate that temperature effects should be considered in the determination of structure-function relationships in many important electrochemical systems.

12.
J Am Chem Soc ; 130(46): 15332-9, 2008 Nov 19.
Artículo en Inglés | MEDLINE | ID: mdl-18942789

RESUMEN

The development of electrocatalytic materials of enhanced activity and efficiency through careful manipulation, at the atomic scale, of the catalyst surface structure has long been a goal of electrochemists. To accomplish this ambitious objective, it would be necessary both to obtain a thorough understanding of the relationship between the atomic-level surface structure and the catalytic properties and to develop techniques to synthesize and stabilize desired active sites. In this contribution, we present a combined experimental and theoretical study in which we demonstrate how this approach can be used to develop novel, platinum-based electrocatalysts for the CO electrooxidation reaction in CO(g)-saturated solution; the catalysts show activities superior to any pure-metal catalysts previously known. We use a broad spectrum of electrochemical surface science techniques to synthesize and rigorously characterize the catalysts, which are composed of adisland-covered platinum surfaces, and we show that highly undercoordinated atoms on the adislands themselves are responsible for the remarkable activity of these materials.

13.
J Phys Chem Lett ; 9(6): 1265-1271, 2018 Mar 15.
Artículo en Inglés | MEDLINE | ID: mdl-29481094

RESUMEN

Electrochemical double layers (EDL) form at electrified interfaces. Whereas the Gouy-Chapman model describes moderately charged EDL, the formation of Stern layers was predicted for highly charged EDL. Our results provide structural evidence for a Stern layer of cations at potentials close to hydrogen evolution in alkali fluoride and chloride electrolytes. Layering was observed by X-ray crystal truncation rods and atomic-scale recoil responses of Pt(111) surface layers. Ordering in the layer was confirmed by glancing-incidence in-plane diffraction measurements.

14.
J Phys Chem B ; 109(49): 23550-7, 2005 Dec 15.
Artículo en Inglés | MEDLINE | ID: mdl-16375330

RESUMEN

The oxygen reduction reaction (ORR) was studied on CO-treated and untreated (111)-(100) nanofaceted platinum surfaces [Komanicky et al. J. Phys. Chem. 2005, 109, 23543] in sulfuric and perchloric acids using the rotating disk electrode technique. Activities of nanofaceted surfaces are found to be considerably higher than a simple average of the activities of (111) and (100) surfaces. We find that the high activity in sulfuric acid is consistent with the higher activity of (111) facets. It is due the weaker sulfate adsorption on finite-size (111) surfaces than on (111) single crystal surfaces where the ORR activity is suppressed by strong sulfate adsorption. However, the high activity found in the weakly absorbing perchloric acid cannot be explained by the finite-size effect, since the activities are reportedly insensitive to terrace sizes [Macia, M. D.; et al. J.Electroanal. Chem., 2004, 564, 141]. We propose a cooperative activity, unique to nanoscale objects, which results from oxy species crossing over between adjacent facets in nanometer proximities.

15.
J Phys Chem B ; 109(49): 23543-9, 2005 Dec 15.
Artículo en Inglés | MEDLINE | ID: mdl-16375329

RESUMEN

We present a novel model system for nanoparticle electrocatalysts. A surface consisting of alternating (100) and (111) facets, several nanometers across and nearly 1 microm long, were self-assembled by annealing Pt single crystal surfaces initially cut at the midpoint between [111] and [100] directions, i.e., Pt(1+ square root of 3 1 1). The formation of these self-assembled arrays of nanofacets was monitored by in-situ surface X-ray scattering. These surfaces were further characterized with scanning probe microscopy and cyclic voltammetry. We found that the Pt(1+ square root of 3 1 1) surface is flat with less than 1 nm rms roughness when it was annealed in argon/hydrogen atmosphere. Then the surface forms nanofacets when it is annealed in pure air. This nanofaceting transition was completely reversible and reproducible. We investigated effects of CO adsorption on the voltammetric characteristics of both hydrogen-annealed and air-annealed surfaces. We found that CO-adsorption/desorption cycles in CO containing electrolyte solution result in considerable modification of blank cyclic voltammograms for the both surfaces. We attributed these differences to the electrochemical annealing of surface defects due to the increased mobility during the cycles.

16.
Nanoscale Res Lett ; 9(1): 336, 2014.
Artículo en Inglés | MEDLINE | ID: mdl-25114634

RESUMEN

We developed a method for production of arrays of platinum nanocrystals of controlled size and shape using templates from ordered silica bead monolayers. Silica beads with nominal sizes of 150 and 450 nm were self-assembled into monolayers over strontium titanate single crystal substrates. The monolayers were used as shadow masks for platinum metal deposition on the substrate using the three-step evaporation technique. Produced arrays of epitaxial platinum islands were transformed into nanocrystals by annealing in a quartz tube in nitrogen flow. The shape of particles is determined by the substrate crystallography, while the size of the particles and their spacing are controlled by the size of the silica beads in the monolayer mask. As a proof of concept, arrays of platinum nanocrystals of cubooctahedral shape were prepared on (100) strontium titanate substrates. The nanocrystal arrays were characterized by atomic force microscopy, scanning electron microscopy, and synchrotron X-ray diffraction techniques.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA