RESUMEN
The increasing demands in optoelectronic applications have driven the advancement of organic-inorganic hybrid metal halides (OIMHs), owing to their exceptional optical and scintillation properties. Among them, zero-dimensional (0D) low-toxic manganese-based scintillators have garnered significant interest due to their exceptional optical transparency and elevated photoluminescence quantum yields (PLQYs), making them promising for colorful light-emitting diodes and X-ray imaging applications. In this study, two OIMH single crystals of (Br-PrTPP)2MnBr4 (Br-PrTPP = (3-bromopropyl) triphenylphosphonium) and (Br-BuTPP)2MnBr4 (Br-BuTPP = (4-bromobutyl) triphenylphosphonium) were prepared via a facile saturated crystallization method. Benefiting from the tetrahedrally coordinated [MnBr4]2- polyhedron, both of them exhibited strong green emissions peaked at 517 nm owing to the d-d electron transition of Mn2+ with near-unity PLQYs of 99.33 and 86.85%, respectively. Moreover, benefiting from the high optical transparencies and remarkable luminescence properties, these manganese halides also exhibit excellent radioluminescent performance with the highest light yield of up to 68,000 photons MeV-1, negligible afterglow (0.4 ms), and linear response to X-ray dose rate with the lowest detection limit of 45 nGyair s-1. In X-ray imaging, the flexible film made by the composite of (Br-PrTPP)2MnBr4 and PDMS shows an ultrahigh spatial resolution of 12.78 lp mm-1, which provides a potential visualization tool for X-ray radiography.
RESUMEN
Zero-dimensional (0D) hybrid metal halides have been emerged as room-temperature phosphorescence (RTP) materials, but synchronous optimization of multiple phosphorescence performance in one structural platform remains less resolved, and stable RTP activity in aqueous medium is also unrealized due to serious instability toward water and oxygen. Herein, we demonstrated a photophysical tuning strategy in a new 0D hybrid zinc halide family of (BTPP)2ZnX4 (BTPP = benzyltriphenylphosphonium, X = Cl and Br). Infrequently, the delicate combination of organic and inorganic species enables this family to display multiple ultralong green afterglow and efficient self-trapped exciton (STE) associated cyan phosphorescence. Compared with inert luminescence of [BTPP]+ cation, incorporation of anionic [ZnX4]2- effectively enhance the spin-orbit coupling effect, which significantly boosts the photoluminescence quantum yield (PLQY) up to 30.66% and 54.62% for afterglow and phosphorescence, respectively. Synchronously, the corresponding luminescence lifetime extend to 143.94 ms and 0.308 µs surpassing the indiscernible phosphorescence of [BTPP]X salt. More importantly, this halide family presents robust RTP emission with nearly unattenuated PLQY in water and harsh condition (acid and basic aqueous solution) over half a year. The highly efficient integrated afterglow and STE phosphorescence as well as ultrahigh aqueous state RTP realize multiple anti-counterfeiting applications in wide chemical environments.
RESUMEN
Exploring highly efficient blue-emissive lead-free halide materials is a significant and challenging objective in the study of luminescent materials. This study reports the synthesis of a new zero-dimensional (0D) hybrid zinc halide of [CYP]ZnBr4 (CYP = 1-cyclohexylpiperazine) containing an isolated [ZnBr4]2- tetrahedron. [CYP]ZnBr4 exhibits strong blue light emission with a high photoluminescence quantum yield (PLQY) of 79.22%, surpassing all previously reported 0D zinc halide counterparts. According to the theoretical and experimental studies, the blue light emission is attributed to intrinsic self-trapped excitons resulting from strong electron-phonon coupling and structural deformation. Importantly, [CYP]ZnBr4 demonstrates excellent structural and luminescence stability toward high temperatures (180 °C) over at least half a month. High luminescence efficiency and stability enable [CYP]ZnBr4 to be an efficient blue phosphor to fabricate white light-emitting diodes (LEDs), which produces high-quality white light with a color rendering index (CRI) of 93.1 and a correlated color temperature (CCT) of 5304 K, closely resembling natural sunlight. This white LED also exhibits consistent performance and stability across different drive currents, suggesting the potential for high-power optoelectronic applications. Overall, this study paves the way for the utilization of 0D hybrid halides in advanced solid-state lighting applications.
RESUMEN
Mn2+ doped colloidal three-dimensional (3D) lead halide perovskite nanocrystal (PNC) has attracted intensive research attention; however, the low exciton binding energy and fatal optical instability of 3D PNC seriously hinder the optoelectronic application. Therefore, it remains significant to explore new stable host perovskite with strongly bound exciton to realize more desirable luminescent property. In this work, we utilized bulk one-dimensional (1D) hybrid perovskite of [AEP]PbBr5 â H2 O (AEP=N-aminoethylpiperazine) as structural platform to rationally optimize the luminescent property by a controllable Mn2+ doping strategy. Significantly, the series of Mn2+ -doped 1D [AEP]PbBr5 â H2 O show enhanced energy transfer efficiency from the strongly bound excitons of host material to 3d electrons of Mn2+ ions, resulting in tunable broadband light emissions from weak yellow to strong red spectral range with highest photoluminescence quantum yield up to 28.41 %. More importantly, these Mn2+ -doped 1D perovskites display ultrahigh structural and optical stabilities in humid atmosphere, water and high temperature exceeding the conventional 3D PNC. Combined highly efficient, tunable and stable broadband light emissions enable Mn2+ -doped 1D perovskite as excellent down-converting phosphor showcasing the potential application in white light emitting diode. This work not only provides a profound understanding of low-dimensional perovskites but also opens a new way to rationally design high-performance broadband light emitting perovskites for solid-state lighting and displaying devices.
RESUMEN
A convenient and rapid detection method for methanol in ethanol remains a major challenge due to their indistinguishable physical properties. Herein, a novel fluorescence probe based on perovskite was successfully designed to overcome this bottleneck. We report a new zero-dimensional (0D) hybrid perovskite of [MP]2 Inx Sb1-x Cl7 â 6 H2 O (MP=2-methylpiperazine) displaying an unusual green light emission with near-unity photoluminescence quantum yield. Remarkably, this 0D perovskite exhibits reversible methanol-response luminescence switching between green and yellow color but fail in any other organic vapors. Even for blended alcohol solutions, the luminescent probe exhibits excellent sensing performance with multiple superiorities of rapid response time (30â s) and ultra-low detection limit (40â ppm), etc. Therefore, this 0D perovskite can be utilized as a perfect fluorescence probe to detect traces of methanol from ethanol with ultrahigh sensitivity, selectivity and repeatability. To the best of our knowledge, this work represents the first perovskite as fluorescence probe for methanol with wide potential in environmental monitoring and methanol detection, etc.
RESUMEN
In recent years, low-dimensional lead halides have emerged as some of most attractive photoelectric materials due to their intrinsic broadband emissions with a potential application in white-light emitting diodes. To achieve the desired performance, tremendous research has emphasized the modulation of inorganic components as optical centers; however, less work has paid attention to the direct contribution of the organic components. Herein, we successfully assembled two new hybrid lead halides of [H2BPP]Pb2X6 (X = Br, 1, and Cl, 2) containing one-dimensional double [Pb2X6]2- chains using optically active 1,3-bis(4-pyridyl)-propane (BPP) as an organic cation. Under UV-light excitation, compounds 1 and 2 exhibit broadband yellowish-green emissions, which were verified by promising photoluminescence quantum efficiencies (PLQEs) of 8.10% and 4.84%, respectively. The broadband light emissions are derived from the combination of dual higher-energy blue and lower-energy yellow light spectra, which can be attributed to the individual contributions of the organic and inorganic components, respectively, according to the time-resolved and temperature-dependent emission spectra as well as theoretical calculations. This work proves the great contribution of organic components to the photophysical properties and provides a new design strategy to realize broadband light emission by rationally combining the dual-emitting properties of different assembly blocks.
RESUMEN
Herein, a new organic-inorganic hybrid cuprous iodide of [(Me)2-DABCO]Cu6I8 was prepared and structurally characterized with a novel three-dimensional (3D) [Cu6I8]2- framework. Significantly, this 3D cuprous iodide displays infrequent broadband red-to-near-infrared light emission (600-1000 nm) stemming from the radiative recombination of self-trapped excitons.
RESUMEN
In recent years, two-dimensional (2D) hybrid lead halide perovskites based on corner-shared [PbX6] octahedrons have received extensive attention with important potentials in single-component white-light emitting diodes (WLEDs) due to the soft and distorted crystal lattices. However, limited research focused on the one-dimensional (1D) perovskites although they possess similar structural superiorities to achieve this performance. Herein, by using different types of organic amine cations as structural direction reagents, we report one new type of hybrid 1D perovskites of APbCl3 (A = (DTHPE)0.5, DMTHP, DBN) based on the same 1D face-shared octahedral [PbCl3]- chains. Upon UV light excitation, these 1D APbCl3 perovskites exhibit intrinsic broad-band bluish white-light emissions covering entire visible light spectra with the highest photoluminescence quantum yield (PLQY) of 6.99%, which catches up with the values of previously reported 2D perovskites. Through the systematical studies of time-resolved, temperature-dependent PL emissions, theoretical calculations, and so on, these broad-band light emissions can be ascribed to the radiative transition within conjugated organic cations. The facile assembly process, intrinsic broad-band light emissions, and high PLQYs enable these 1D APbCl3 perovskites as new types of promising candidates in fabricating single-component WLEDs.
RESUMEN
In the past few decades, organic-inorganic hybrid metal halides acting as single-component white light emission diodes (LEDs) have attracted extensive attentions, but most of the studies concentrate on the low-dimensional lead perovskites. Here, by using the nontoxic silver as optically active metal center, a series of hybrid silver halides based on one-dimensional structures were constructed and realized broadband white light emission. Compounds [H2DABCO][Ag2X4(DABCO)] (X = Br (1), I (2)) feature one-dimensional [Ag2X4(DABCO)]2- structures charged balanced by [H2DABCO]2+ cations. Compound 1 exhibits an efficient broadband white-light emission with photoluminescence quantum efficiency (PLQE) of about 2.1% and excellent photochemical stability, while compound 2 gives a broadband yellow-white emission centered at 556 nm. [HDABCO]3Ag5Cl8 (3) gives a strong broadband yellow emission (585 nm) with high PLQE of 6.7%, which can be easily fabricated as a white light emitting device. Based on the temperature-dependent, particle-size-dependent, and time-resolved PL measurements as well as other detailed studies, the broadband white-light emissions are ascribed to the synergetic effects of the organic and inorganic components. Our work provides a unique structural assembly method to explore lead-free single-component white-light illuminants from molecular level.
RESUMEN
Considering the instability and low photoluminescence quantum yield (PLQY) of blue-emitting perovskites, it is still challenging and attractive to construct single crystalline hybrid lead halides with highly stable and efficient blue light emission. Herein, by rationally introducing d10 transition metal into single lead halide as new structural building unit and optical emitting center, we prepared a bimetallic halide of [(NH4 )2 ]CuPbBr5 with new type of three-dimensional (3D) anionic framework. [(NH4 )2 ]CuPbBr5 exhibits strong band-edge blue emission (441â nm) with a high PLQY of 32 % upon excitation with UV light. Detailed photophysical studies indicate [(NH4 )2 ]CuPbBr5 also displays broadband red light emissions derived from self-trapped states. Furthermore, the 3D framework features high structural and optical stabilities at extreme environments during at least three years. To our best knowledge, this work represents the first 3D non-perovskite bimetallic halide with highly efficient and stable blue light emission.
RESUMEN
In recent years, although low-dimensional hybrid lead halides have received great attention due to the fascinating photoluminescent (PL) properties, the research is still on the early stage and only limited phases have been explored and characterized. Here, by introducing heterometals as mixed structural compositions and optical activity centers, we prepared a series of low-dimensional hybrid heterometallic halides, namely as, [(Me)-DABCO]2Cu2PbI6, [(Me)2-DABCO]2M5Pb2I13 (M = Cu and Ag) and [(Me)2-DABCO]Ag2PbBr6 (Me = methyl group, DABCO = 1,4-diazabicyclo[2.2.2]octane). These hybrid halides feature a low-dimensional 0D [Cu2PbI6]2- cluster, a 1D [M5Pb2I13]4- chain, and a 2D [Ag2PbBr6]2- layer, respectively, on the basis of corner-, edge- and face-sharing connecting of [MX4] tetrahedrons, [PbX5] quadrangular pyramids, and [PbX6] octahedrons. Under the photoexcitation, these hybrid heterometallic halides exhibit deep-red luminescent emissions from 711 to 801 nm with the largest Stocks shift of 395 nm. The temperature-dependent PL emissions, PL lifetime, and theoretical calculations are also investigated to probe into the intrinsic nature of photoluminescent emissions. This work affords new types of hybrid halides by introducing different metal centers to probe into the structural evolution and photoluminescent properties.
RESUMEN
Visible light driven photocatalysts based on crystalline microporous metal halogenides received much less attention compared with dense or composite oxide semiconductors. Using the well-known photosensitive transition metal-complexes [TM(2,2-bipy)3 ]2+ (TM=Fe, Co, Ni, Ru) as templates, a special three-dimensional (3D) metal halogenide framework of [TM(2,2-bipy)3 ]Cu4 Br6 was designed with [Cu4 Br4 ] cluster as 4-connected node. These microporous materials feature narrow band gaps and stable visible light driven photocatalytic properties including water reduction to provide H2 and photodegradation of organic pollutants. The study of electronic band structure shows that the TM complexes effectively prevent the recombination of photo-induced electron/hole pairs leading to excellent photocatalytic activity and photochemical stability. This work represents the first 3D microporous metal halogenides used as visible light driven photocatalyst to provide hydrogen energy.
RESUMEN
The development of new visible light-driven photocatalysts based on semiconducting materials remains a greatly interesting and challenging task for the purpose of solving the energy crisis and environmental issues. By using photosensitive [(Me)2-2,2'-bipy]2+ (1,1'-dimethyl-2,2'-bipyridinium) cation as template, we synthesized one new type of inorganic-organic hybrid cuprous and silver halogenides of [(Me)2-2,2'-bipy]M8X10 (M = Cu, Ag, X = Br, I). The compounds feature a three-dimensional anionic [M8X10]2- network composed of a one-dimensional [M8X12] chain based on MX4 tetrahedral units. The photosensitization of organic cationic templates results in narrow band gaps of hybrid compounds (1.66-2.06 eV), which feature stable visible light-driven photodegradation activities for organic pollutants. A detailed study of the photocatalytic mechanism, including the photoelectric response, photoluminescence spectra, and theoretical calculations, shows that the organic cationic template effectively inhibits the recombination of photoinduced electron-hole pairs leading to excellent photocatalytic activities and photochemical stabilities.
RESUMEN
With mixed transition-metal (TM) complex, alkali-metal cations, or halogen anions as structure-directing agents, two types of two-dimensional (2D) layered inorganic-organic hybrid silver bromides were prepared and structurally characterized as K[TM(2,2-bipy)3]2Ag6Br11 (TM = Ni (1), Co (2), Zn (3), Fe (4)) and [TM(2,2-bipy)3]2Ag13Br17 (TM = Ni (5), Co (6), Zn (7), Fe (8)). Compounds 1-4 feature 2D microporous anionic [Ag6Br11]5- layers composed of [Ag3Br7] secondary building units based on AgBr4 tetrahedral units, and compounds 5-8 contain 2D [Ag13Br16]3- layers built from the one-dimensional complex [Ag8Br12] and [Ag5Br8] chains. The photosensitization of TM complex dyes led to the narrow semiconducting behaviors with tunable band gaps of 1.73-2.71 eV for the title compounds, which result in excellent and stable photocatalytic degradation activities over organic pollutants under visible-light irradiation. The studies of photocatalytic mechanism based on radical-trapping experiments and electronic band structural calculation show that the TM complex cations play important roles in the photocatalytical activities and photochemical stabilities due to their excellent separating abilities for photogenerated carriers. This technique affords one new type of visible-light-driven photocatalyst and facilitates the integration of 2D layered materials and semiconducting photocatalytic properties into one hybrid d10 TM halogenide.
RESUMEN
With mixed transition-metal-complex, alkali-metal, or organic cations as structure-directing agents, a series of novel two-dimensional (2D) layered inorganic-organic hybrid iodoargentates, namely, Kx[TM(2,2-bipy)3]2Ag6I11 (TM = Mn (1), Fe (2), Co (3), Ni (4), Zn (5); x = 0.89-1) and [(Ni(2,2-bipy)3][H-2,2-bipy]Ag3I6 (6), have been solvothermally synthesized and structurally characterized. All the title compounds feature 2D microporous layers composed by [Ag3I7] secondary building units based on AgI4 tetrahedra. Differently, the [Ag3I7] trimers are directly interconnected via corner-sharing to form the 2D [Ag6I11](5-) layer in compounds 1-5, whereas two neighboring [Ag3I7] trimers are initially condensed into a hexameric [Ag6I12] ternary building unit as a new node, which further self-assembles, leading to the 2D [Ag6I10](4-) layer in compound 6. The UV-vis diffuse-reflectance measurements reveal that all the compounds possess proper semiconductor behaviors with tunable band gaps of 1.66-2.75 eV, which lead to highly efficient photocatalytic degradation activities over organic pollutants under visible light irradiation compared to that of N-dotted P25. Interestingly, all the samples feature distinct photodegradative speeds at the same reaction conditions, and compound 1 features the highest photocatalytic activity among the title phases. The luminescence properties, band structures, and thermal stabilities were also studied.
RESUMEN
A quantitative water detection method is urgently needed in storage facilities, space exploration, and the chemical industry. Although numerous physical techniques have been widely utilized to determine the water content, they still suffer from many disadvantages such as highly expensive special instruments, complicated analysis processes, etc. Hence, a convenient, rapid, and sensitive water analysis method is highly desirable. Herein, we developed a visual fluorescence sensing technology for water detection based on reversible PL off-on switching of organic-inorganic hybrid zero-dimensional (0D) manganese halides. In this work, a family of hybrid manganese halides were synthesized through a facile solution method, namely, [NH4(18-Crown-6)]2MnBr4, [Ca(18-Crown-6)·3H2O](18-Crown-6)MnBr4, [NH4(dibenzo-18-Crown-6)]2MnBr4, and [Ca(dibenzo-18-Crown-6)·2H2O]MnBr4. Excited by UV light, these highly crystalline manganese halides exhibit strong green light emissions from the d-d electron transition of Mn2+ with near-unity photoluminescence quantum yield and submillisecond lifetime. Benefiting from the dynamic and weak ionic bonding interactions, these 0D manganese halides display reversible water-response on/off luminescence switching but fail in any other aprotic solvents. Therefore, these 0D hybrid manganese halides can be explored as ultrafast visual fluorescence probes to detect the trace amount of water in organic solvents with multiple superiorities of rapid response time (< 2 s), ultralow detection limit (9.71 ppm), excellent repeatability, etc. The reversible water-response luminescent on/off switching also provides a binary optical gate with advanced applications in anticounterfeiting and information security, etc.
RESUMEN
Zero-dimensional (0D) hybrid metal halides have emerged as highly efficient luminescent materials, but integrated multifunction in a structural platform remains a significant challenge. Herein, a new hybrid 0D indium halide of (Im-BDMPA)InCl6·H2O was designed as a highly efficient luminescent emitter and X-ray scintillator toward multiple optoelectronic applications. Specifically, it displays strong broadband yellow light emission with near-unity photoluminescence quantum yield (PLQY) through Sb3+ doping, acting as a down-conversion phosphor to fabricate high-performance white light emitting diodes (WLEDs). Benefiting from the high PLQY and negligible self-absorption characteristics, this halide exhibits extraordinary X-ray scintillation performance with a high light yield of 55 320 photons per MeV, which represents a new scintillator in 0D hybrid indium halides. Further combined merits of a low detection limit (0.0853 µGyair s-1), ultra-high spatial resolution of 17.25 lp per mm and negligible afterglow time (0.48 ms) demonstrate its excellent application prospects in X-ray imaging. In addition, this 0D halide also exhibits reversible luminescence off-on switching toward tribromomethane (TBM) but fails in any other organic solvents with an ultra-low detection limit of 0.1 ppm, acting as a perfect real-time fluorescent probe to detect TBM with ultrahigh sensitivity, selectivity and repeatability. Therefore, this work highlights the multiple optoelectronic applications of 0D hybrid lead-free halides in white LEDs, X-ray scintillation, fluorescence sensors, etc.
RESUMEN
Considering the instability and toxicity of 3D Pb-based perovskite nanocrystals, lead-free low-dimensional organic-inorganic hybrid metal halides have attracted widespread attention as potential substitutes. Herein, two new tin-based 0D halides [H4BAPP]SnBr5·Br and [H4BAPP]SnCl5·Cl·H2O (BAPP = 1,4-bis(3-aminopropyl)piperazine) were synthesized successfully based on [SnX5]3- as an emission center. Typically, [H4BAPP]SnBr5·Br and [H4BAPP]SnCl5·Cl·H2O display broadband yellow and yellow-green light emissions originating from the radiative recombination of self-trapped excitons (STEs). The photoluminescence quantum yields (PLQYs) of the two compounds were calculated to be 19.27% and 2.36%, respectively. Furthermore, the excellent chemical and thermal stability and broadband light emissions reveal their potential application in solid-state white lighting diodes.
RESUMEN
Environmentally friendly and highly efficient blue luminescent materials are an unremitting pursuit in the optoelectronic field. Herein, we assembled a new 0D lead-free metal halide of (F-PPA)ZnBr4, which exhibits narrow blue light emission with a remarkable PLQY of 50.15%, high stability and high detection sensitivity toward UV light. These results indicate the potential for the application of low-dimensional zinc-based halides in multiple optoelectronic devices.
RESUMEN
Commercially available rare-earth-doped inorganic oxide materials have been widely applied as X-ray scintillators, but the fragile characteristics, high detection limit, and harsh preparation condition seriously restrict their wide applications. Furthermore, it remains a huge challenge to realize X-ray flexible imaging technology for real-time monitoring of the curving interface of complex devices. To address these issues, we herein report two isostructural cuprous halides of zero-dimensional (0D) [AEPipz]CuX3·X·H2O (AEPipz = N-aminoethylpiperazine, X = Br and I) with controllable size to nanosize crystal as highly efficient scintillators toward flexible X-ray imaging. These cuprous halides exhibit highly efficient cyan photoluminescence and radioluminescence emissions with the highest quantum yield of 92.1% and light yield of 62,400 photons MeV-1, respectively, surpassing most of the commercially available inorganic scintillators. Meanwhile, the ultralow detection limit of 95.7 nGyair s-1 was far below the X-ray dose required for diagnosis (5.5 µGyair s-1). More significantly, the flexible film is facilely assembled with excellent foldability and high crack resistance, which further acts as a scintillation screen achieving a high spatial resolution of 17.4 lp mm-1 in X-ray imaging, demonstrating the potential application in wearable radiation radiography. The combined advantages of high light yield, low detection limit, and excellent flexibility promote these 0D cuprous halides as the most promising X-ray scintillators.