RESUMEN
Dopamine is high-value compound of pharmaceutical interest, but its industrial scale production mostly focuses on chemical synthesis, possessing environment pollution. Bio-manufacturing has caused much attention for its environmental characteristic. Resting cells were employed to as biocatalysts with extraordinary advantages like offering stable surroundings, the inherent presence of expensive cofactors. In this study, whole-cell bioconversion was employed to convert dopa to dopamine. To increase the titer and yield of dopamine production through whole-cell catalysis, three kinds of aromatic amino acid transport protein, AroP, PheP and TyrP, were selected to be co-expressed. The effects of the concentration of L-dopa, pyridoxal-5'- phosphate (PLP), reaction temperature and pH were characterized for improvement of bioconversion. Under optimal conditions, dopamine titer reached 1.44 g/L with molar yield of 46.3%, which is 6.62 times than that of initial conditions. The catalysis productivity of recombinant E. coli co-expressed L-dopa decarboxylase(DDC) and AroP was further enhanced by repeated cell recycling, which maintained over 50% of its initial ability with eight consecutive catalyses. This study was the first to successfully bioconversion of dopamine by whole-cell catalysis. This research provided reference for whole-cell catalysis which is hindered by cell membrane.
Asunto(s)
Dopamina , Levodopa , Escherichia coli/genética , Proteínas Portadoras , CatálisisRESUMEN
Serotonin, as a monoamine neurotransmitter, modulates the activity of the nervous system. Due to its importance in the coordination of movement and regulation of mood, impairments in the synthesis and homeostasis of serotonin are involved in numerous disorders, including depression, Parkinson's disease, and anxiety. Currently, serotonin is primarily obtained via natural extraction. But this method is time-consuming and low yield, as well as unstable supply of raw materials. With the development of synthetic biology, researchers have established the method of microbial synthesis of serotonin. Compared with natural extraction, microbial synthesis has the advantages of short production cycle, continuous production, not limited by season and source, and environment-friendly; hence, it has garnered considerable research attention. However, the yield of serotonin is still too low to industrialization. Therefore, this review provides the latest progress and examples that illustrate the synthesis pathways of serotonin as well as proposes strategies for increasing the production of serotonin. KEY POINTS: ⢠Two biosynthesis pathways of serotonin are introduced. ⢠L-tryptophan hydroxylation is the rate-limiting step in serotonin biosynthesis. ⢠Effective strategies are proposed to improve serotonin production.
Asunto(s)
Serotonina , Triptófano Hidroxilasa , Serotonina/metabolismo , Triptófano Hidroxilasa/metabolismo , Triptófano/metabolismo , Hidroxilación , NeurotransmisoresRESUMEN
BACKGROUND: 1,5-Diamino-2-hydroxy-pentane (2-OH-PDA), as a new type of aliphatic amino alcohol, has potential applications in the pharmaceutical, chemical, and materials industries. Currently, 2-OH-PDA production has only been realized via pure enzyme catalysis from lysine hydroxylation and decarboxylation, which faces great challenges for scale-up production. However, the use of a cell factory is very promising for the production of 2-OH-PDA for industrial applications, but the substrate transport rate, appropriate catalytic environment (pH, temperature, ions) and separation method restrict its efficient synthesis. Here, a strategy was developed to produce 2-OH-PDA via an efficient, green and sustainable biosynthetic method on an industrial scale. RESULTS: In this study, an approach was created for efficient 2-OH-PDA production from L-lysine using engineered E. coli BL21 (DE3) cell catalysis by a two-stage hydroxylation and decarboxylation process. In the hydroxylation stage, strain B14 coexpressing L-lysine 3-hydroxylase K3H and the lysine transporter CadB-argT enhanced the biosynthesis of (2S,3S)-3-hydroxylysine (hydroxylysine) compared with strain B1 overexpressing K3H. The titre of hydroxylysine synthesized by B14 was 2.1 times higher than that synthesized by B1. Then, in the decarboxylation stage, CadA showed the highest hydroxylysine activity among the four decarboxylases investigated. Based on the results from three feeding strategies, L-lysine was employed to produce 110.5 g/L hydroxylysine, which was subsequently decarboxylated to generate a 2-OH-PDA titre of 80.5 g/L with 62.6% molar yield in a 5-L fermenter. In addition, 2-OH-PDA with 95.6% purity was obtained by solid-phase extraction. Thus, the proposed two-stage whole-cell biocatalysis approach is a green and effective method for producing 2-OH-PDA on an industrial scale. CONCLUSIONS: The whole-cell catalytic system showed a sufficiently high capability to convert lysine into 2-OH-PDA. Furthermore, the high titre of 2-OH-PDA is conducive to separation and possesses the prospect of industrial scale production by whole-cell catalysis.
Asunto(s)
Escherichia coli , Lisina , Biocatálisis , Escherichia coli/metabolismo , Hidroxilisina , Lisina/metabolismo , PentanosRESUMEN
BACKGROUND: L-Tryptophan (L-Trp) derivatives such as 5-hydroxytryptophan (5-HTP) and 5-hydroxytryptamine (5-HT), N-Acetyl-5-hydroxytryptamine and melatonin are important molecules with pharmaceutical interest. Among, 5-HT is an inhibitory neurotransmitter with proven benefits for treating the symptoms of depression. At present, 5-HT depends on plant extraction and chemical synthesis, which limits its mass production and causes environmental problems. Therefore, it is necessary to develop an efficient, green and sustainable biosynthesis method to produce 5-HT. RESULTS: Here we propose a one-pot production of 5-HT from L-Trp via two enzyme cascades for the first time. First, a chassis cell that can convert L-Trp into 5-HTP was constructed by heterologous expression of tryptophan hydroxylase from Schistosoma mansoni (SmTPH) and an artificial endogenous tetrahydrobiopterin (BH4) module. Then, dopa decarboxylase from Harminia axyridis (HaDDC), which can specifically catalyse 5-HTP to 5-HT, was used for 5-HT production. The cell factory, E. coli BL21(DE3)â³tnaA/BH4/HaDDC-SmTPH, which contains SmTPH and HaDDC, was constructed for 5-HT synthesis. The highest concentration of 5-HT reached 414.5 ± 1.6 mg/L (with conversion rate of 25.9 mol%) at the optimal conditions (substrate concentration,2 g/L; induced temperature, 25â; IPTG concentration, 0.5 mM; catalysis temperature, 30â; catalysis time, 72 h). CONCLUSIONS: This protocol provided an efficient one-pot method for converting. L-Trp into 5-HT production, which opens up possibilities for the practical biosynthesis of natural 5-HT at an industrial scale.
Asunto(s)
Serotonina , Triptófano , 5-Hidroxitriptófano/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Serotonina/metabolismo , Triptófano/metabolismo , Triptófano Hidroxilasa/genética , Triptófano Hidroxilasa/metabolismoRESUMEN
A novel chitinolytic bacterium Chitinibacter sp. GC72, which produces an enzyme capable of efficiently converting chitin only into N-acetyl-D-glucosamine (GlcNAc), was successfully sequenced and analyzed. The assembled draft genome of strain GC72 is 3,455,373 bp, containing 3346 encoded protein sequences with G + C content of 53.90%. Among these annotated genes, 17 chitinolytic enzymes including 12 glycoside hydrolase family 18 chitinases, three family 19 chitinases, one family 20 ß-hexosaminidase, and one auxiliary activity family 10 lytic polysaccharide monooxygenase, were found to be essential in the production of GlcNAc from chitin. The genomic information of strain GC72 provides a reference genome for Chitinibacter bacteria and abundant novel chitinolytic enzyme resources, and allows researchers to explore potential applications in GlcNAc enzymatic production.
Asunto(s)
Betaproteobacteria/genética , Quitinasas , Genoma Bacteriano , Secuencia de Aminoácidos , Betaproteobacteria/enzimología , Quitina , Quitinasas/genética , Quitinasas/metabolismoRESUMEN
Chitinases are hydrolases that catalyze the cleavage of the ß-1,4-O-glycosidic linkages in chitin, a polysaccharide abundantly found in nature. Although numerous chitinolytic enzymes have been studied in detail, relatively little is known about chitinases capable of broad specificity. Broad-specificity chitinases are a sort of novel chitinases possessing two or three different catalytic activities among exochitinase, endochitinase, and N-acetylglucosaminidase. In the light of the difference of module composition and catalytic mechanism, the broad-specificity chitinases included two broad categories, broad-specificity chitinases with a single catalytic domain or multi-catalytic domains. This broad-specificity chitinases have great potential in chitin conversion. In this review, we summarize all reported cases of broad-specificity chitinases and provide an overview of the recent findings on their origin, characterization, catalytic mechanism, and potential application. Moreover, in-depth study into these chitinases could contribute to our understanding of other broad-specificity enzymes which may have some benefits on progress of biotechnology.
Asunto(s)
Quitina/metabolismo , Quitinasas/metabolismo , Acetilglucosaminidasa/metabolismo , Biotecnología , Catálisis , Dominio Catalítico , Quitinasas/química , Hexosaminidasas/química , Hexosaminidasas/metabolismo , Especificidad por SustratoRESUMEN
A whole-cell (cadaverine-producing strain, Escherichia coli AST3) immobilization method was developed for improving catalytic activity and cadaverine tolerance during cadaverine production. Cell-immobilized beads were prepared by polyvinyl alcohol (PVA) and sodium alginate (SA) based on their advantages in biocatalyst activity recovery and mechanical strength. The following optimal immobilization conditions were established using response surface methodology: 3.62% SA, 4.71% PVA, 4.21% CaCl2, calcification, 12 h, and freezing for 16 h at - 80 °C, with a cell concentration of 0.3% (g dry cell weight (DCW) per 100 mL) of immobilized beads. After a 2-h bioconversion, the immobilized beads maintained 85% of their original biocatalyst activity, which was 1.8-fold higher than that of free cells. Furthermore, the effects of cell protectants on immobilized biocatalyst activity were examined by fed-batch bioconversion experiments. The results showed that the addition of polyvinylpyrrolidone (PVP) into the immobilized matrix effectively protected biocatalyst activity, with 95% of the relative activity remaining after the 2-h bioconversion. The performance of PVA-SA-PVP-immobilized E. coli AST3 showed continuous production of cadaverine, with an average cadaverine yield of 29 ± 1 g gDCW-1 h-1 after 12 h, suggesting that this method is capable of industrial scale cadaverine production.
Asunto(s)
Cadaverina/metabolismo , Cadaverina/farmacología , Citoprotección/efectos de los fármacos , Alginatos/metabolismo , Cadaverina/biosíntesis , Catálisis , Alcohol Polivinílico/metabolismoRESUMEN
OBJECTIVE: To evaluate the impact of obesity on various outcomes in patients undergoing minimally invasive transforaminal lumbar interbody fusion (TLIF) surgeries. METHODS: PubMed, Scopus, Embase, and Cochrane Library databases were screened for studies reporting outcomes in obese and nonobese patients undergoing TLIF surgeries. Studies reporting operative time, estimated blood loss, length of hospital stay, incidence of pseudoarthrosis, Oswestry Disability Index (ODI) scores, pain scores (Visual Analog Scale, VAS), and PROMIS PF scores were included. A qualitative and quantitative analysis was performed to calculate mean differences or odds ratios (ORs) using random-effects models. RESULTS: Fourteen good-quality studies were included in this review, with a combined sample size of 4,889 participants. The analysis revealed that patients with obesity had slightly longer operative times compared to patients with normal weight, with a mean difference of 14.87 minutes, though not significant. Similarly, morbidly obese patients had a mean difference of 21.44 minutes in operative time. Estimated blood loss was comparable in both groups. However, morbidly obese patients had longer hospital stays, with a mean difference of 8.18 days and obese patients have 20% higher odds of experiencing complications compared to nonobese patients. The incidence of pseudoarthrosis, ODI scores, or pain scores (VAS back and leg) were similar in obese and normal weight patients. CONCLUSIONS: Obesity, particularly morbid obesity, may have an impact on certain outcomes in patients undergoing minimally invasive TLIF surgeries. Morbidly obese patients tend to have significantly longer operative times with significantly longer hospital stays than nonobese patients.
Asunto(s)
Vértebras Lumbares , Procedimientos Quirúrgicos Mínimamente Invasivos , Obesidad , Fusión Vertebral , Humanos , Fusión Vertebral/métodos , Fusión Vertebral/efectos adversos , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Obesidad/complicaciones , Obesidad/cirugía , Vértebras Lumbares/cirugía , Resultado del Tratamiento , Tempo Operativo , Tiempo de Internación , Complicaciones Posoperatorias/epidemiología , Complicaciones Posoperatorias/etiología , Pérdida de Sangre Quirúrgica/estadística & datos numéricosRESUMEN
In this study, we proposed a biological approach to efficiently produce pseudouridine (Ψ) from glucose and uracil in vivo using engineered Escherichia coli. By screening host strains and core enzymes, E. coli MG1655 overexpressing Ψ monophosphate (ΨMP) glycosidase and ΨMP phosphatase was obtained, which displayed the highest Ψ concentration. Then, optimization of the RBS sequences, enhancement of ribose 5-phosphate supply in the cells, and overexpression of the membrane transport protein UraA were investigated. Finally, fed-batch fermentation of Ψ in a 5 L fermentor can reach 27.5 g/L with a yield of 89.2 mol % toward uracil and 25.6 mol % toward glucose within 48 h, both of which are the highest to date. In addition, the Ψ product with a high purity of 99.8% can be purified from the fermentation broth after crystallization. This work provides an efficient and environmentally friendly protocol for allowing for the possibility of Ψ bioproduction on an industrial scale.
Asunto(s)
Proteínas de Escherichia coli , Escherichia coli , Escherichia coli/metabolismo , Seudouridina/metabolismo , Glucosa/metabolismo , Uracilo/metabolismo , Reactores Biológicos , Fermentación , Ingeniería Metabólica , Proteínas de Transporte de Membrana/metabolismo , Proteínas de Escherichia coli/metabolismoRESUMEN
5-Hydroxytryptophan (5-HTP), as the precursor of serotonin and melatonin in animals, can regulate mood, sleep, and behavior, which is widely used in pharmaceutical and health products industry. The enzymatic production of 5-hydroxytryptophan (5-HTP) from L-tryptophan (L-Trp) using tryptophan hydroxylase (TPH) show huge potential in application due to its advantages, such as mild reaction conditions, avoidance of protection/deprotection processes, excellent regioselectivity and considerable catalytic efficiency, compared with chemical synthesis and natural extraction. However, the low thermostability of TPH restricted its hydroxylation efficiency toward L-Trp. In this study, we aimed to improve the thermostability of TPH via semi-rational design guided by (folding free energy) ΔΔG fold calculation. After two rounds of evolution, two beneficial mutants M1 (S422V) and M30 (V275L/I412K) were obtained. Thermostability evaluation showed that M1 and M30 possessed 5.66-fold and 6.32-fold half-lives (t1/2) at 37 °C, and 4.2 °C and 6.0 °C higher melting temperature (Tm) than the WT, respectively. The mechanism behind thermostability improvement was elucidated with molecular dynamics simulation. Furthermore, biotransformation of 5-HTP from L-Trp was performed, M1 and M30 displayed 1.80-fold and 2.30-fold than that of WT, respectively. This work provides important insights into the thermostability enhancement of TPH and generate key mutants that could be robust candidates for practical production of 5-HTP.
Asunto(s)
5-Hidroxitriptófano , Triptófano Hidroxilasa , Animales , 5-Hidroxitriptófano/metabolismo , Triptófano Hidroxilasa/genética , Triptófano Hidroxilasa/metabolismo , Triptófano/metabolismo , Serotonina/metabolismo , Ingeniería de ProteínasRESUMEN
Fermentation plays a pivotal role in the industrialization of bioproducts, yet there is a substantial lag in the fermentation process regulation. Here, an artificial neural network (ANN) and genetic algorithm (GA) coupled with fermentation kinetics were employed to establish an innovative lysine fermentation control. Firstly, the strategy of coupling GA with ANN was established. Secondly, specific lysine formation rate (qp), specific substrate consumption rate (qs), and specific cell growth rate (µ) were predicted and optimized by ANN-GA. The optimal ANN model adopts a three-layer feed-forward back-propagation structure (4:10:1). The optimal fermentation control parameters are obtained through GA. Finally, when the carbon to nitrogen ratio, residual sugar concentration, ammonia nitrogen concentration, and dissolved oxygen were [2.5, 4.5], [6.5, 9.5] g·L-1, [1.0, 2.0] g·L-1 and [20, 30] %, respectively, the lysine concentration reaches its peak at 213.0 ± 5.10 g·L-1. The novel control strategy holds significant potential for optimizing the fermentation of other bioproducts.
Asunto(s)
Algoritmos , Lisina , Fermentación , Redes Neurales de la Computación , NitrógenoRESUMEN
In this study, co-immobilization of PLP and its dependent enzyme were investigated using a novel type of porous chitin bead (PCB). Crayfish shell was used to prepare PCB via dissolution of it to form beads, followed by the removal of CaCO3 and protein in-situ. Scanning electron microscopy, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller method showed that the PCB had abundant porous structures with deacetylation degree of 33 % and the specific surface area of 35.87 m2/g. Then, the beads are used to co-immobilize pyridoxal 5-phosphate (PLP) and l-lysine decarboxylase fused with chitin-binding protein (SpLDC-ChBD). Laser scanning confocal microscopy revealed that the beads could co-immobilize PLP and SpLDC-ChBD successfully. In addition, a packed bed was also constructed using the PCB containing co-immobilized SpLDC-ChBD and PLP. The substrate conversion remained at 91.09 % after 48 h with 50 g/L l-lysine, which showed good continuous catalysis ability. This study provides a novel method for co-immobilization of enzyme and PLP, as well as develops a new application of waste crustacean shells.
Asunto(s)
Astacoidea , Quitina , Animales , Fosfato de Piridoxal , Porosidad , CatálisisRESUMEN
N-acetylneuraminic acid (Neu5Ac) possesses the ability to promote mental health and enhance immunity and is widely used in both medicine and food fields as a supplement. Enzymatic production of Neu5Ac using N-acetyl-D-glucosamine (GlcNAc) as substrate was significant. However, the high-cost GlcNAc limited its development. In this study, an in vitro multi-enzyme catalysis was built to produce Neu5Ac using affordable chitin as substrate. Firstly, exochitinase SmChiA from Serratia proteamaculans and N-acetylglucosaminosidase CmNAGase from Chitinolyticbacter meiyuanensis SYBC-H1 were screened and combined to produce GlcNAc, effectively. Then, the chitinase was cascaded with N-acetylglucosamine-2-epimerase (AGE) and N-neuraminic acid aldolase (NanA) to produce Neu5Ac; the optimal conditions of the multi-enzyme catalysis system were 37°C and pH 8.5, the ratio of AGE to NanA (1:4) and addition of pyruvate (70 mM), respectively. Finally, 9.2 g/L Neu5Ac could be obtained from 20 g/L chitin within 24 h along with two supplementations with pyruvate. This work will lay a good foundation for the production of Neu5Ac from cheap chitin resources.
RESUMEN
Cis-3-Hydroxypipecolic acid (cis-3-HyPip) is an important intermediate for the synthesis of GE81112 tetrapeptides, a small family of unusual nonribosomal peptide congeners with potent inhibitory activity against prokaryotic translation initiation. In this study, we constructed a microbial cell factory that can convert L-lysine into cis-3-hydroxypipecolic acid (cis-3-HyPip). Lysine cyclodeaminase SpLCD and Fe(II)/α-ketoglutarate (2-OG)-based oxygenase GetF were co-expressed in Escherichia coli. Plasmids with different copy numbers were used to balance the expression of these two enzymes, and the cell with the most appropriate balance of this kind for carrying plasmid pET-duet-getf-splcd was obtained. After determining the temperature (30 °C), pH (7.0), cell biomass, substrate concentration, Fe2+ concentration (10 mM), L-ascorbate concentration (10 mM), and TritonX-100 concentration (0.1% w/v) that were optimal for whole-cell catalysis, the yield of cis-3-HyPip reached as high as 25 mM (3.63 g/L).
Asunto(s)
Lisina , Ácidos Pipecólicos , Escherichia coli/genética , Plásmidos/genéticaRESUMEN
Cis-3-hydroxypipecolic acid (cis-3-HyPip), a key structural component of tetrapeptide antibiotic GE81112, which has attracted substantial attention for its broad antimicrobial properties and unique ability to inhibit bacterial translation initiation. In this study, a combined strategy to increase the productivity of cis-3-HyPip was investigated. First, combinatorial optimization of the ribosomal binding site (RBS) sequence was performed to tune the gene expression translation rates of the pathway enzymes. Next, in order to reduce the addition of the co-substrate α-ketoglutarate (2-OG), the major engineering strategy was to reconstitute the tricarboxylic acid (TCA) cycle of Escherichia coli to force the metabolic flux to go through GetF catalyzed reaction for 2-OG to succinate conversion, a series of engineered strains were constructed by the deletion of the relevant genes. In addition, the metabolic flux (gltA and icd) was improved and glucose concentrations were optimized to enhance the supply and catalytic efficiency of continuous 2-OG supply powered by glucose. Finally, under optimal conditions, the cis-3-HyPip titer of the best strain catalysis reached 33 mM, which was remarkably higher than previously reported.
RESUMEN
In this study, a gene encoding ß-N-acetylglucosaminidase, designated NAGaseA, was cloned from Chitinibacter sp. GC72 and subsequently functional expressed in Escherichia coli BL21 (DE3). NAGaseA contains a glycoside hydrolase family 20 catalytic domain that shows low identity with the corresponding domain of the well-characterized NAGases. The recombinant NAGaseA had a molecular mass of 92 kDa. Biochemical characterization of the purified NAGaseA revealed that the optimal reaction condition was at 40°C and pH 6.5, and exhibited great pH stability in the range of pH 6.5-9.5. The V ma x , K m, k cat, and k cat /K m of NAGaseA toward p-nitrophenyl-N-acetyl glucosaminide (pNP-GlcNAc) were 3333.33 µmol min-1 l-1, 39.99 µmol l-1, 4667.07 s-1, and 116.71 ml µmol-1 s-1, respectively. Analysis of the hydrolysis products of N-acetyl chitin oligosaccharides (N-Acetyl COSs) indicated that NAGaseA was capable of converting N-acetyl COSs ((GlcNAc)2-(GlcNAc)6) into GlcNAc with hydrolysis ability order: (GlcNAc)2 > (GlcNAc)3 > (GlcNAc)4 > (GlcNAc)5 > (GlcNAc)6. Moreover, NAGaseA could generate (GlcNAc)3-(GlcNAc)6 from (GlcNAc)2-(GlcNAc)5, respectively. These results showed that NAGaseA is a multifunctional NAGase with transglycosylation activity. In addition, significantly synergistic action was observed between NAGaseA and other sources of chitinases during hydrolysis of colloid chitin. Finally, 0.759, 0.481, and 0.986 g/l of GlcNAc with a purity of 96% were obtained using three different chitinase combinations, which were 1.61-, 2.36-, and 2.69-fold that of the GlcNAc production using the single chitinase. This observation indicated that NAGaseA could be a potential candidate enzyme in commercial GlcNAc production.
RESUMEN
A novel multifunctional chitinase (CmChi3)-encoding gene was cloned from Chitinolyticbacter meiyuanensis and actively expressed in Escherichia coli. Sequence analysis showed that CmChi3 contains two glycoside hydrolase family 18 (GH18) catalytic domains and exhibited low identity with well-characterized chitinases. The optimum pH and temperature of purified recombinant CmChi3 were 6.0 and 50°C, respectively. CmChi3 exhibited strict substrate specificity of 4.1 U/mg toward colloidal chitin (CC) and hydrolyzed it to yield N-acetyl-D-glucosamine (GlcNAc) as the sole end product. An analysis of the hydrolysis products toward N-acetyl chitooligosaccharides (N-acetyl COSs) and CC substrates revealed that CmChi3 exhibits endochitinase, N-acetyl-ß-d-glucosaminidase (NAGase), and transglycosylase (TGase) activities. Further studies revealed that the N-terminal catalytic domain of CmChi3 exhibited endo-acting and NAGase activities, while the C-terminal catalytic domain showed exo-acting and TGase activities. The hydrolytic properties and favorable environmental adaptations indicate that CmChi3 holds potential for commercial GlcNAc production from chitin.
RESUMEN
Chitinolyticbacter meiyuanensis SYBC-H1, a bacterium capable of hydrolyzing chitin and shrimp shell to N-acetyl glucosamine (GlcNAc) as the only product, was isolated previously. Here, the hydrolysis mechanism of this novel strain toward chitin was investigated. Sequencing and analysis of the complete genome of SYBC-H1 showed that it encodes 32 putatively chitinolytic enzymes including 30 chitinases affiliated with the glycoside hydrolase (GH) families 18 (26) and 19 (4), one GH family 20 ß-N-acetylglucosaminidase (NAGase), and one Auxiliary Activities (AA) family 10 lytic polysaccharide monooxygenase (LPMO). However, only eight GH18 chitinases, one AA10 LPMO, and one GH20 NAGase were detected in the culture broth of the strain, according to peptide mass fingerprinting (PMF). Of these, genes encoding chitinolytic enzymes including five GH18 chitinases (Cm711, Cm3636, Cm3638, Cm3639, and Cm3769) and one GH20 NAGase (Cm3245) were successfully expressed in active form in Escherichia coli. The hydrolysis of chitinous substrates showed that Cm711, Cm3636, Cm3638, and Cm3769 were endo-chitinases and Cm3639 was exo-chitinase. Moreover, Cm3639 and Cm3769 can convert the GlcNAc dimer and colloidal chitin (CC) into GlcNAc, which showed that they also possess NAGase activity. In addition, NAGase Cm3245 possesses a very high exo-acting activity of hydrolyzing GlcNAc dimer. These results suggest that chitinases and NAGase from SYBC-H1 both play important roles in conversion of N-acetyl chitooligosaccharides to GlcNAc, resulting in the accumulation of the final product GlcNAc. To our knowledge, this is the first report of the complete genome sequence and chitinolytic enzyme genes discovery of this strain.
RESUMEN
Lysine decarboxylase (CadA) can directly convert L-lysine to cadaverine, which is an important platform chemical that can be used to produce polyamides. However, the non-recyclable and the poor pH tolerance of pure CadA hampered its practical application. Herein, a one-step purification and immobilization procedure of CadA was established to investigate the cadaverine production from L-lysine. Renewable biomass chitin was used as a carrier for lysine decarboxylase (CadA) immobilization via fusion of a chitin-binding domain (ChBD). Scanning electron microscopy, laser scanning confocal microscopy, fourier transform infrared spectra, elemental analysis, and thermal gravimetric analysis proved that the fusion protein ChBD-CadA can be adsorbed on chitin effectively. Furthermore, the fusion protein (ChBD-CadA) existed better pH stability compared to wild CadA, and kept over 73% of the highest activity at pH 8.0. Meanwhile, the ChBD-CadA showed high specificity toward chitin and reached 93% immobilization yield within 10 min under the optimum conditions. The immobilized ChBD-CadA (I-ChBD-CadA) could efficiently converted L-lysine at 200.0 g/L to cadaverine at 135.6 g/L in a batch conversion within 120 min, achieving a 97% molar yield of the substrate L-lysine. In addition, the I-ChBD-CadA was able to be reused under a high concentration of L-lysine and retained over 57% of its original activity after four cycles of use without acid addition to maintain pH. These results demonstrate that immobilization of CadA using chitin-binding domain has the potential in cadaverine production on an industrial scale.