Domain Switching Characteristics in Ga-Doped HfO2 Ferroelectric Thin Films with Low Coercive Field.

The gallium-doped hafnium oxide (Ga-HfO2) films with different Ga doping concentrations were prepared by adjusting the HfO2/Ga2O3 atomic layer deposition cycle ratio for high-speed and low-voltage operation in HfO2-based ferroelectric memory. The Ga-HfO2 ferroelectric films reveal a finely modulated coercive field (Ec) from 1.1 (HfO2/Ga2O3 = 32:1) to an exceptionally low 0.6 MV/cm (HfO2/Ga2O3 = 11:1). This modulation arises from the competition between domain nucleation and propagation speed during polarization switching, influenced by the intrinsic domain density and phase dispersion in the film with specific Ga doping concentrations. Higher Ec samples exhibit a nucleation-dominant switching mechanism, while lower Ec samples undergo a transition from a nucleation-dominant to a propagation-dominant reversal mechanism as the electric field increases. This work introduces Ga as a viable dopant for low Ec and offers insights into material design strategies for HfO2-based ferroelectric memory applications.

Self-Rectifying All-Optical Modulated Optoelectronic Multistates Memristor Crossbar Array for Neuromorphic Computing.

Researching optoelectronic memristors capable of integrating sensory and processing functions is essential for advancing the development of efficient neuromorphic vision. Here, we experimentally demonstrated an all-optical controlled and self-rectifying optoelectronic memristor (OEM) crossbar array with the function of multilevel storage under light stimuli. The NiO/TiO2 device exhibits an ultrahigh (>104) rectifying ratio (RR) thus overcoming the presence of sneak current. The reversible conductance modulation without electric signal involvement provides a novel way to realize ultrafast information processing. The proposed OEM array realized synaptic functions observed in the human brain, including long-term potentiation (LTP), long-term depression (LTD), paired-pulse facilitation (PPF), the transition from short-term memory (STM) to long-term memory (LTM), and learning experience behaviors successfully. The authors present a novel OEM crossbar that possesses complete light-modulation capabilities, potentially advancing the future development of efficient neuromorphic vision.

Novel Three-Dimensional Artificial Neural Network Based on an Eight-Layer Vertical Memristor with an Ultrahigh Rectify Ratio (>107) and an Ultrahigh Nonlinearity (>105) for Neuromorphic Computing.

In recent years, memristors have successfully demonstrated their significant potential in artificial neural networks (ANNs) and neuromorphic computing. Nonetheless, ANNs constructed by crossbar arrays suffer from cross-talk issues and low integration densities. Here, we propose an eight-layer three-dimensional (3D) vertical crossbar memristor with an ultrahigh rectify ratio (RR > 107) and an ultrahigh nonlinearity (>105) to overcome these limitations, which enables it to reach a >1 Tb array size without reading failure. Furthermore, the proposed 3D RRAM shows advanced endurance (>1010 cycles), retention (>104 s), and uniformity. In addition, several synaptic functions observed in the human brain were mimicked. On the basis of the advanced performance, we constructed a novel 3D ANN, whose learning efficiency and recognition accuracy were enhanced significantly compared with those of conventional single-layer ANNs. These findings hold promise for the development of highly efficient, precise, integrated, and stable VLSI neuromorphic computing systems.

Long-Range Epitaxial MOF Electronics for Continuous Monitoring of Human Breath Ammonia.

As an important biomarker, ammonia exhibits a strong correlation with protein metabolism and specific organ dysfunction. Limited by the immobile instrumental structure, invasive and complicated procedures, and unsatisfactory online sensitivity and selectivity, current medical diagnosis fails to monitor this chemical in real time efficiently. Herein, we present the successful synthesis of a long-range epitaxial metal-organic framework on a millimeter domain-sized single-crystalline graphene substrate (LR-epi-MOF). With a perfect 30° epitaxial angle and a mere 2.8% coincidence site lattice mismatch between the MOF and graphene, this long-range-ordered epitaxial structure boosts the charge transfer from ammonia to the MOF and then to graphene, thereby promoting the overall charge delocalization and exhibiting extraordinary electrical global coupling properties. This unique characteristic imparts a remarkable sensitivity of 0.1 ppb toward ammonia. The sub-ppb detecting capability and high anti-interference ability enable continuous information recording of breath ammonia that is strongly correlated with the intriguing human lifestyle. Wearable electronics based on the LR-epi-MOF could accurately portray the active protein metabolism pattern in real time and provide personal assistance in health management.

Two-dimensional molybdenum ditelluride waveguide-integrated near-infrared photodetector.

Low-cost, small-sized, and easy integrated high-performance photodetectors for photonics are still the bottleneck of photonic integrated circuits applications and have attracted increasing attention. The tunable narrow bandgap of two-dimensional (2D) layered molybdenum ditelluride (MoTe2) from ∼0.83 to ∼1.1 eV makes it one of the ideal candidates for near-infrared (NIR) photodetectors. Herein, we demonstrate an excellent waveguide-integrated NIR photodetector by transferring mechanically exfoliated 2D MoTe2onto a silicon nitride (Si3N4) waveguide. The photoconductive photodetector exhibits excellent responsivity (R), detectivity (D*), and external quantum efficiency at 1550 nm and 50 mV, which are 41.9 A W-1, 16.2 × 1010Jones, and 3360%, respectively. These optoelectronic performances are 10.2 times higher than those of the free-space device, revealing that the photoresponse of photodetectors can be enhanced due to the presence of waveguide. Moreover, the photodetector also exhibits competitive performances over a broad wavelength range from 800 to 1000 nm with a highRof 15.4 A W-1and a largeD* of 59.6 × 109Jones. Overall, these results provide an alternative and prospective strategy for high-performance on-chip broadband NIR photodetectors.

Reconfigurable Logic-in-Memory Computing Based on a Polarity-Controllable Two-Dimensional Transistor.

Logic-in-memory architecture holds great promise to meet the high-performance and energy-efficient requirements of data-intensive scenarios. Two-dimensional compacted transistors embedded with logic functions are expected to extend Moore's law toward advanced nodes. Here we demonstrate that a WSe2/h-BN/graphene based middle-floating-gate field-effect transistor can perform under diverse current levels due to the controllable polarity by the control gate, floating gate, and drain voltages. Such electrical tunable characteristics are employed for logic-in-memory architectures and can behave as reconfigurable logic functions of AND/XNOR within a single device. Compared to the conventional devices like floating-gate field-effect transistors, our design can greatly decrease the consumption of transistors. For AND/NAND, it can save 75% transistors by reducing the transistor number from 4 to 1; for XNOR/XOR, it is even up to 87.5% with the number being reduced from 8 to 1.

The Doping Effect on the Intrinsic Ferroelectricity in Hafnium Oxide-Based Nano-Ferroelectric Devices.

Hafnium oxide (HfO2)-based ferroelectric tunnel junctions (FTJs) have been extensively evaluated for high-speed and low-power memory applications. Herein, we investigated the influence of Al content in HfAlO thin films on the ferroelectric characteristics of HfAlO-based FTJs. Among HfAlO devices with different Hf/Al ratios (20:1, 34:1, and 50:1), the HfAlO device with Hf/Al ratio of 34:1 exhibited the highest remanent polarization and excellent memory characteristics and, thereby, the best ferroelectricity among the investigated devices. Furthermore, first-principal analyses verified that HfAlO thin films with Hf/Al ratio of 34:1 promoted the formation of the orthorhombic phase against the paraelectric phase as well as alumina impurities and, thus, enhanced the ferroelectricity of the device, providing theoretical support for supporting experimental results. The findings of this study provide insights for developing HfAlO-based FTJs for next-generation in-memory computing applications.

Ultralow Power Wearable Organic Ferroelectric Device for Optoelectronic Neuromorphic Computing.

In order to imitate brain-inspired biological information processing systems, various neuromorphic computing devices have been proposed, most of which were prepared on rigid substrates and have energy consumption levels several orders of magnitude higher than those of biological synapses (∼10 fJ per spike). Herein, a new type of wearable organic ferroelectric artificial synapse is proposed, which has two modulation modes (optical and electrical modulation). Because of the high photosensitivity of organic semiconductors and the ultrafast polarization switching of ferroelectric materials, the synaptic device has an ultrafast operation speed of 30 ns and an ultralow power consumption of 0.0675 aJ per synaptic event. Under combined photoelectric modulation, the artificial synapse realizes associative learning. The proposed artificial synapse with ultralow power consumption demonstrates good synaptic plasticity under different bending strains. This provides new avenues for the construction of ultralow power artificial intelligence system and the development of future wearable devices.

Integrated In-Sensor Computing Optoelectronic Device for Environment-Adaptable Artificial Retina Perception Application.

With the development and application of artificial intelligence, there is an appeal to the exploitation of various sensors and memories. As the most important perception of human beings, vision occupies more than 80% of all the received information. Inspired by biological eyes, an artificial retina based on 2D Janus MoSSe was fabricated, which could simulate functions of visual perception with electronic/ion and optical comodulation. Furthermore, inspired by human brain, sensing, memory, and neuromorphic computing functions were integrated on one device for multifunctional intelligent electronics, which was beneficial for scalability and high efficiency. Through the formation of faradic electric double layer (EDL) at the metal-oxide/electrolyte interfaces could realize synaptic weight changes. On the basis of the optoelectronic performances, light adaptation of biological eyes, preprocessing, and recognition of handwritten digits were implemented successfully. This work may provide a strategy for the future integrated sensing-memory-processing device for optoelectronic artificial retina perception application.

Wafer-Scale Demonstration of MBC-FET and C-FET Arrays Based on Two-Dimensional Semiconductors.

Two-dimentional semiconductors have shown potential applications in multi-bridge channel field-effect transistors (MBC-FETs) and complementary field-effect transistors (C-FETs) due to their atomic thickness, stackability, and excellent electrical properties. However, the exploration of MBC-FET and C-FET based on large-scale 2D semiconductors is still lacking. Here, based on a reliable vertical stacking of wafer-scale 2D semiconductors, large-scale MBC-FETs and C-FETs using n-type MoS2 and p-type MoTe2 are successfully fabricated. The drive current of an MBC-FET with two layers of MoS2 channel (20 µm/10 µm) is up to 60 µA under 1 V bias. Compared with the single-gate MoS2 FET, the carrier mobility of MBC-FET is 2.3 times higher and the sub-threshold swing is 70% smaller. Furthermore, NAND and NOR logic circuits are also constructed based on two vertically stacked MoS2 channels. Then, C-FET arrays are fabricated by 3D integrating n-type MoS2 FET and p-type MoTe2 FET, which exhibit a voltage gain of 7 V/V when VDD  = 4 V. In addition, this C-FET device can directly convert light signals to an electrical digital signal within a single device. The demonstration of MBC-FET and C-FET based on large-scale 2D semiconductors will promote the application of 2D semiconductors in next-generation circuits.

A Steep-Slope MoS2/Graphene Dirac-Source Field-Effect Transistor with a Large Drive Current.

In the continuous transistor feature size scaling down, the scaling of the supply voltage is stagnant because of the subthreshold swing (SS) limit. A transistor with a new mechanism is needed to break through the thermionic limit of SS and hold the large drive current at the same time. Here, by adopting the recently proposed Dirac-source field-effect transistor (DSFET) technology, we experimentally demonstrate a MoS2/graphene (1.8 nm/0.3 nm) DSFET for the first time, and a steep SS of 37.9 mV/dec at room temperature with nearly free hysteresis is observed. Besides, by bringing in the structure of gate-all-around (GAA), the MoS2/graphene DSFET exhibits a steeper SS of 33.5 mV/dec and a 40% increased normalized drive current up to 52.7 µA·µm/µm (VDS = 1 V) with a current on/off ratio of 108, which shows potential for low-power and high-performance electronics applications.

Ferroelectric domain wall memory with embedded selector realized in LiNbO3 single crystals integrated on Si wafers.

Interfacial 'dead' layers between metals and ferroelectric thin films generally induce detrimental effects in nanocapacitors, yet their peculiar properties can prove advantageous in other electronic devices. Here, we show that dead layers with low Li concentration located at the surface of LiNbO3 ferroelectric materials can function as unipolar selectors. LiNbO3 mesa cells were etched from a single-crystal LiNbO3 substrate, and Pt metal contacts were deposited on their sides. Poling induced non-volatile switching of ferroelectric domains in the cell, and volatile switching in the domains in the interfacial (dead) layers, with the domain walls created within the substrate being electrically conductive. These features were also confirmed using single-crystal LiNbO3 thin films bonded to SiO2/Si wafers. The fabricated nanoscale mesa-structured memory cell with an embedded interfacial-layer selector shows a high on-to-off ratio (>106) and high switching endurance (~1010 cycles), showing potential for the fabrication of crossbar arrays of ferroelectric domain wall memories.

Improved electro-optical and photoelectric performance of GaN-based micro-LEDs with an atomic layer deposited AlN passivation layer.

The quantum efficiency of GaN-based micro-light-emitting diodes (micro-LEDs) is of great significance for their luminescence and detection applications. Optimized passivation process can alleviate the trapping of carriers by sidewall defects, such as dangling bonds, and is regarded as an effective way to improve the quantum efficiency of micro-LEDs. In this work, an AlN passivation layer was prepared by atomic layer deposition to improve the electro-optical and photoelectric conversion efficiency in GaN-based micro-LEDs. Compared to conventional Al2O3 passivation, the AlN passivation process has a stronger ability to eliminate the sidewall defects of micro-LEDs due to the homogeneous passivation interface. Our experiments show that the AlN-passivated device exhibits two orders of magnitude lower forward leakage and a smaller ideality factor, which leads to significantly enhanced external quantum efficiency (EQE). For 25*25 µm2 micro-LEDs, the EQE of the AlN-passivated device was 18.3% and 57.7% higher than that of the Al2O3-passivated device in luminescence application and detection application, respectively.

High-bandwidth light inputting multilevel photoelectric memory based on thin-film transistor with a floating gate of CsPbBr3/CsPbI3 blend quantum dots.

The electronic-photonic convergent systems can overcome the data transmission bottleneck for microchips by enabling processor and memory chips with high-bandwidth optical input/output. However, current silicon-based electronic-photonic systems require various functional devices/components to convert high-bandwidth optical signals into electrical ones, thus making further integrations of sophisticated systems rather difficult. Here, we demonstrate thin-film transistor-based photoelectric memories employing CsPbBr3/CsPbI3 blend perovskite quantum dots (PQDs) as a floating gate, and multilevel memory cells are achieved under programming and erasing modes, respectively, by imputing high-bandwidth optical signals. For different bandwidth light input (i.e. 500-550, 575-650 and 675-750 nm) with the same intensity, three levels of programming window (i.e. 3.7, 1.9 and 0.8 V) and erasing window (i.e. -1.9, -0.6 and -0.1 V) are obtained under electrical pulses, respectively. This is because the blend PQDs have two different bandgaps, and different amounts of photo-generated carriers can be produced for different wavelength optical inputs. It is noticed that the 675-750 nm light inputs have no effects on both programming and erasing windows because of no photo-carriers generation. Four memory states are demonstrated, showing enough large gaps (1.12-5.61 V) between each other, good data retention and programming/erasing endurance. By inputting different optical signals, different memory states can be switched easily. Therefore, this work directly demonstrates high-bandwidth light inputting multilevel memory cells for novel electronic-photonic systems.

Dual-gate MoS2phototransistor with atomic-layer-deposited HfO2as top-gate dielectric for ultrahigh photoresponsivity.

An asymmetric dual-gate (DG) MoS2field-effect transistor (FET) with ultrahigh electrical performance and optical responsivity using atomic-layer-deposited HfO2as a top-gate (TG) dielectric was fabricated and investigated. The effective DG modulation of the MoS2FET exhibited an outstanding electrical performance with a high on/off current ratio of 6 × 108. Furthermore, a large threshold voltage modulation could be obtained from -20.5 to -39.3 V as a function of the TG voltage in a DG MoS2phototransistor. Meanwhile, the optical properties were systematically explored under a series of gate biases and illuminated optical power under 550 nm laser illumination. An ultrahigh photoresponsivity of 2.04 × 105AW-1has been demonstrated with the structure of a DG MoS2phototransistor because the electric field formed by the DG can separate photogenerated electrons and holes efficiently. Thus, the DG design for 2D materials with ultrahigh photoresponsivity provides a promising opportunity for the application of optoelectronic devices.

Three-Dimensional Nanoscale Flexible Memristor Networks with Ultralow Power for Information Transmission and Processing Application.

To construct an artificial intelligence system with high efficient information integration and computing capability like the human brain, it is necessary to realize the biological neurotransmission and information processing in artificial neural network (ANN), rather than a single electronic synapse as most reports. Because the power consumption of single synaptic event is ∼10 fJ in biology, designing an intelligent memristors-based 3D ANN with energy consumption lower than femtojoule-level (e.g., attojoule-level) and faster operating speed than millisecond-level makes it possible for constructing a higher energy efficient and higher speed computing system than the human brain. In this paper, a flexible 3D crossbar memristor array is presented, exhibiting the multilevel information transmission functionality with the power consumption of 4.28 aJ and the response speed of 50 ns per synaptic event. This work is a significant step toward the development of an ultrahigh efficient and ultrahigh-speed wearable 3D neuromorphic computing system.

A Dual-Gate MoS2 Photodetector Based on Interface Coupling Effect.

2D transition metal dichalcogenides (TMDs) based photodetectors have shown great potential for the next generation optoelectronics. However, most of the reported MoS2 photodetectors function under the photogating effect originated from the charge-trap mechanism, which is difficult for quantitative control. Such devices generally suffer from a poor compromise between response speed and responsivity (R) and large dark current. Here, a dual-gated (DG) MoS2 phototransistor operating based on the interface coupling effect (ICE) is demonstrated. By simultaneously applying a negative top-gate voltage (VTG ) and positive back-gate voltage (VBG ) to the MoS2 channel, the photogenerated holes can be effectively trapped in the depleted region under TG. An ultrahigh R of ≈105 A W-1 and detectivity (D*) of ≈1014 Jones are achieved in several devices with different thickness under Pin of 53 µW cm-2 at VTG = -5 V. Moreover, the response time of the DG phototransistor can also be modulated based on the ICE. Based on these systematic measurements of MoS2 DG phototransistors, the results show that the ICE plays an important role in the modulation of photoelectric performances. The results also pave the way for the future optoelectrical application of 2D TMDs materials and prompt for further investigation in the DG structured phototransistors.

SERCA and P-glycoprotein inhibition and ATP depletion are necessary for celastrol-induced autophagic cell death and collateral sensitivity in multidrug-resistant tumor cells.

Multidrug resistance (MDR) represents an obstacle in anti-cancer therapy. MDR is caused by multiple mechanisms, involving ATP-binding cassette (ABC) transporters such as P-glycoprotein (P-gp), which reduces intracellular drug levels to sub-therapeutic concentrations. Therefore, sensitizing agents retaining effectiveness against apoptosis- or drug-resistant cancers are desired for the treatment of MDR cancers. The sarcoplasmic/endoplasmic reticulum Ca2+ ATPase (SERCA) pump is an emerging target to overcome MDR, because of its continuous expression and because the calcium transport function is crucial to the survival of tumor cells. Previous studies showed that SERCA inhibitors exhibit anti-cancer effects in Bax-Bak-deficient, apoptosis-resistant and MDR cancers, whereas specific P-gp inhibitors reverse the MDR phenotype of cancer cells by blocking efflux of chemotherapeutic agents. Here, we unraveled SERCA and P-gp as double targets of the triterpenoid, celastrol to reverse MDR. Celastrol inhibited both SERCA and P-gp to stimulate calcium-mediated autophagy and ATP depletion, thereby induced collateral sensitivity in MDR cancer cells. In vivo studies further confirmed that celastrol suppressed tumor growth and metastasis by SERCA-mediated calcium mobilization. To the best of our knowledge, our findings demonstrate collateral sensitivity in MDR cancer cells by simultaneous inhibition of SERCA and P-gp for the first time.

High-energy x-ray radiation effects on the exfoliated quasi-two-dimensional ß-Ga2O3 nanoflake field-effect transistors.

The effects of x-ray irradiation on the mechanically exfoliated quasi-two-dimensional (quasi-2D) ß-Ga2O3 nanoflake field-effect transistors (FETs) under the condition of biasing voltage were systematically investigated for the first time. It has been revealed that the device experienced two stages during irradiation. At low ionizing doses (<240 krad), the device performance is mainly influenced by the photo-effect and the subsequent persistent photocurrent (PPC) effect as a result of the pre-existing electron traps (e-trap) in the oxides far away from the SiO2/ß-Ga2O3 interface. At larger doses (>240 krad), the device characteristics are dominated by the radiation-induced structural or compositional deterioration. The newly-generated e-traps are found located at the SiO2/ß-Ga2O3 interface. This study shed light on the future radiation-tolerant device fabrication process development, paving a way towards the feasibility and practicability of ß-Ga2O3-based devices in extreme-environment applications.

Tubular 3D Resistive Random Access Memory Based on Rolled-Up h-BN Tube.

Due to their advantages compared with planar structures, rolled-up tubes have been applied in many fields, such as field-effect transistors, compact capacitors, inductors, and integrative sensors. On the other hand, because of its perfect insulating nature, ultrahigh mechanical strength and atomic thickness property, 2D hexagonal boron nitride (h-BN) is a very suitable material for rolled-up memory applications. In this work, a tubular 3D resistive random access memory (RRAM) device based on rolled-up h-BN tube is realized, which is achieved by self-rolled-up technology. The tubular RRAM device exhibits bipolar resistive switching behavior, nonvolatile data storage ability, and satisfactorily low programming current compared with other 2D material-based RRAM devices. Moreover, by releasing from the substrate, the footprint area of the tubular device is reduced by six times. This tubular RRAM device has great potential for increasing the data storage density, lowering the power consumption, and may be applied in the fields of rolled-up systems and sensing-storage integration.