Resveratrol augments paclitaxel sensitivity by modulating miR-671-5p/STOML2/PINK1/Parkin-mediated autophagy signaling in A549 cell.

BACKGROUND: Paclitaxel (PTX) resistance has become a notable clinical concern of Non-small cell lung cancer (NSCLC). Our study aim is to investigate the effects of Resveratrol (RES) on NSCLC cells that have developed resistance to PTX. The NSCLC cell line A549 was employed in this investigation to establish a PTX-resistant NSCLC cell line, denoted as A549/PTX, and established tumor transplantaton model. The presence of miR-671-5p, Stomatin-like protein 2 (STOML2), and mitophagy biomarkers was evaluated using quantitative teal-time PCR (qRT-PCR) and western blot, The assessment of cell proliferation and apoptosis was conducted through the utilisation of colony formation and flow cytometry assays. The investigation of mitochondrial autolysosomes was conducted using transmission electron microscopy (TEM). Our results showed that the application of RES therapy resulted in a substantial improvement in the sansitivity of A549/PTX cells. RES exhibited an augmentation of apoptosis and a suppression of mitophagy in A549/PTX cells. RES induced an upregulation in the expression of miR-671-5p. This, in turn, leaded to the inhibition of STOML2, a protein that directly interacts with PINK1. In summary, our research indicates that RES improved the susceptibility of A549/PTX cells to PTX through miR-671-5p-mediated STOML2 inhibition.

Application of 3D Slicer Combined With Simple Coordinate Method in Operation of Cerebral Arteriovenous Malformations in Functional Areas.

The authors report a case of intracranial arteriovenous malformation in functional areas, initially presenting with symptomatic epilepsy was surgically excised by the Neurosurgery Department of our hospital. The patient's head computed tomography, magnetic resonance imaging, and digital subtraction angiography examination suggested intracranial arteriovenous malformations in the left frontal functional area. A preoperative 3D-reconstruction technique was used to reconstruct the malformed vascular mass, supplying arteries, draining veins, and precise surgical resection was performed. Postoperative pathology indicated vascular malformation. No seizures occurred after surgery. There was no further neurological impairment. Preoperative use of image postprocessing techniques can facilitate precise surgical resection of brain arteriovenous malformations. Three-dimensional Slicer in cerebral arteriovenous malformations in functional areas not only shortened the preoperative planning time but also improved the efficiency of the surgery. Reduce the incidence of postoperative complications. It is helpful for further popularization and application.

Oxidation of Cathepsin D by Hydroxy Radical: Its Effect on Enzyme Structure and Activity against Myofibrillar Proteins Extracted from Coregonus peled.

In this study, cathepsin D was oxidized in vitro with different concentrations of H2O2, and the activity, structure, and extent of myofibrillar protein degradation by oxidized cathepsin D were evaluated. The sulfhydryl content of cathepsin D decreased to 9.20% after oxidation, while the carbonyl content increased to 100.06%. The ß-sheet in the secondary structure altered due to oxidation as well. The changes in the intrinsic fluorescence and UV absorption spectra indicated that oxidation could cause swelling and aggregation of cathepsin D molecules. The structure of cathepsin D could change its activity, and the activity was highest under 1 mM H2O2. Cathepsin D could degrade myofibrillar proteins in different treatment groups, and the degree of degradation is various. Therefore, this study could provide a scientific basis for the mechanism of interaction among hydroxyl radical oxidation, cathepsin D, and MP degradation.

Effect of flocculant dosage on the settling properties and underflow concentration of thickener for flocculated tailing suspensions.

Flocculation is important in the thickening process to improve the underflow concentration in thickeners for tailing suspensions. Traditional zone settling velocity (ZSV) functions ignore the effect of flocculant dosage on the ZSV and the thickening behavior of thickeners. To investigate the effect of flocculant dosage on the settling flux function, a series of batch settling tests were conducted at various flocculant dosages for unclassified and fine tailings. The correlation among flocculant dosage, solid fraction, and parameters in the ZSV function was revealed. Moreover, a simulation of continuous thickening based on the ZSV function was performed. Results indicated that flocculation influenced settling velocity and floc density. With an increased flocculant dosage, the settling velocity of floc increased, resulting in increased underflow concentration. Conversely, floc density decreased due to a stronger particle-particle interaction, leading to a decreased underflow concentration.

Droplet Dispersion States of Cyclodextrin-Based Emulsions from Nonlinear Rheological Properties.

Polymers are desirable to improve emulsion stability by stuffing them into the continuous phase. How to get information on the droplet dispersion states of the emulsions remains a challenge, as the emulsion characteristics are dictated by two intertwining components, the polymer matrix and the droplets. Herein, we use an amphiphilic polymer, gum arabic (GA), to mediate the droplet flocculation of cyclodextrin (CD)-based emulsions and compare them with our previous studies on the stabilization of CD-based emulsions by a nonamphiphilic polymer, methylcellulose (MC). We characterize the emulsions by using optical microscopy, confocal laser scanning microscopy, and laser particle analysis, explore their rheological behavior through large-amplitude oscillatory shear experiments, and analyze the nonlinear viscoelasticities through Fourier transform (FT)-rheology and Lissajous-Bowditch plots. There is a great difference between GA and MC in the viscosity effect and the arrangement around emulsion droplets. GA is not an effective flocculation inhibitor due to a bridging flocculation mechanism rather than a direct viscosity effect. Our analysis highlights the role of the intrinsic nonlinearity parameter (Q0) extracted by FT analysis in reflecting the droplet dispersion states of the emulsions by decoupling structural contributions from the polymers and the emulsion droplets.

Preparation of Cellulose Nanocrystals from Jujube Cores by Fractional Purification.

Jujube cores are fiber-rich industrial waste. Dewaxing, alkali treatment, bleaching, and sulfuric acid hydrolysis were used to generate cellulose nanocrystals (CNCs) from the jujube cores in this study. The morphological, structural, crystallinity, and thermal properties of the fibers were investigated using FE-SEM, TEM, AFM, FT-IR, XRD, and TGA under various processes. CNCs' zeta (ζ) potential and water contact angle (WAC) were also investigated. The findings demonstrate that non-fibrous components were effectively removed, and the fiber particles shrunk over time because of many activities. CNCs had a rod-like shape, with a length of 205.7 ± 52.4 nm and a 20.5 aspect ratio. The crystal structure of cellulose Iß was preserved by the CNCs, and the crystallinity was 72.36%. The temperature of the fibers' thermal degradation lowered during the operations, although CNCs still had outstanding thermal stability (>200 °C). Aside from the CNCs, the aqueous suspension of CNCs was slightly agglomerated; thus, the zeta (ζ) potential of the CNCs' suspension was −23.72 ± 1.7 mV, and the powder had high hydrophilicity. This research will be valuable to individuals who want to explore the possibility for CNCs made of jujube cores.

Bulk and Interfacial Contributions to Stabilization of Cyclodextrin-Based Emulsions Mediated by Bacterial Cellulose.

Cyclodextrin (CD)-based emulsions have a characteristic of rapid droplet flocculation, which limits their application as functional material templates, so it is very important to improve the stability of CD-based emulsions. In this study, we select bacterial cellulose (BC) as a nonadsorbing inhibitor to prevent flocculation of CD-based emulsions. We map a phase diagram of the aqueous dispersions of CD inclusion complexes (ICs) and BC from morphological observations and investigate the effects of BC on properties of the IC-laden films. We further explore the effects of BC concentration on the stability of the CD-based emulsions and investigate rheological behavior of the emulsions through large-amplitude oscillatory shear experiments. It shows that BC can effectively suppress the flocculation of CD-based emulsion droplets even at a concentration as low as 0.01 wt %. We propose that BC has dual effects from bulk and interfacial contributions on increasing emulsion stability. At low concentrations, BC mainly results in higher packing density of ICs on the emulsion droplet surface through excluded volume repulsion, and at high concentrations, BC creates a network structure that confines the motion of emulsion droplets and retards flocculation.

Stress buffering in cyclodextrin-based membranes coated on emulsion droplet surfaces.

Surface instability of membranes not only plays a critical role in the morphological evolution observed in natural and biological systems, but also underpins a promising way for the bottom-up fabrication of novel functional materials. There is an urgent need for the design of novel building blocks into membranes, and the understanding of the abilities of the membranes to cope with mechanical stress is therefore of considerable importance. Here, we design membranes built with cyclodextrin-oil inclusion complexes, which are formed spontaneously at the oil/water interface by a self-assembly process. We select the oil phases of distinct molecular structures, namely, branched triglyceride oil and straight-chain n-dodecane, and examine the patterns in which the membranes adopt morphological transitions to buffer stress. We discuss two possible buffering scenarios for the behaviors observed in view of structural arrest and interfacial rheology, which are most closely linked to the rigidity of the membranes. The membranes represent fascinating models and shed some light on the origin of arrested stress relaxation.

Extraction Optimization of Astragaloside IV by Response Surface Methodology and Evaluation of Its Stability during Sterilization and Storage.

Radix Astragali is referred to as a variety of food-medicine herb, and it is commonly applied as Traditional Chinese Medicine (TCM). However, it is extremely difficult to extract its bio-active compounds (astragaloside IV) and apply it in food processing efficiently, which restricts its practical applications. In this study, the conditions required for the extraction of astragaloside IV were optimized by following the response surface methodology. More specifically, ammonia with a concentration of 24% was used as an extracting solvent, the solid-liquid ratio was 1:10 (w:v); the Radix Astragali was soaked at 25 °C for 120 min in advance and then stirred at 25 °C for 52 min (150 rpm) to extract astragaloside IV. This method promoted the transformation of other astragalosides into astragaloside IV and replaced the traditional approach for extraction, the solvent reflux extraction method. The yield of astragaloside IV reached the range of 2.621 ± 0.019 mg/g. In addition, the stability of astragaloside IV was evaluated by detecting its retention rate during sterilization and 60-day storage. As suggested by the results, the astragaloside IV in acidic, low-acidic, and neutral solutions was maintained above 90% after sterilization (95 °C and 60 min) but below 60% in an alkaline solution. High temperature and short-term sterilization approach is more appropriate for astragaloside IV in an alkaline solution. It was also found out that the astragaloside IV obtained using our method was maintained over 90% when stored at room temperature (25 °C), and there was no significant difference observed to low temperature (4 °C) in solutions regardless of acidity.

Droplet clustering in cyclodextrin-based emulsions mediated by methylcellulose.

Rapid droplet aggregation in cyclodextrin (CD)-stabilized emulsions limits their practical use as material templates. Herein, we formulate mixtures of submicron CD-based emulsion droplets suspended in aqueous solutions of methylcellulose (MC) with various concentrations and molecular weights. We evaluate the effects of MC on the microstructure and stability of the emulsions using different techniques including optical microscopy, laser particle analysis, confocal laser scanning microscopy and multiple light scattering, explore the rheological behavior of the emulsions through large amplitude oscillatory shear experiments, and study the viscoelastic nonlinearities of the emulsions as a function of strain and strain-rate space through nondimensional elastic and viscous Lissajous-Bowditch plots. It is demonstrated that the emulsion droplets are present in the form of small clusters and their size is almost independent of MC concentration and molecular weight. The clustering pattern is also supported by the changes in viscoelastic properties of the emulsions and the intracycle nonlinear behavior of the Lissajous-Bowditch plots. We propose for the first time that glass-like dynamic arrest takes place with the formation of small equilibrium droplet clusters in the situation where the CD-based emulsion droplets are forced by depletion flocculation and kinetic trapping simultaneously exerted by MC.

Preparation of Doum fruit (Hyphaene thebaica) dietary fiber supplemented biscuits: influence on dough characteristics, biscuits quality, nutritional profile and antioxidant properties.

The increasing demand for functional foods has boosted up the food industry to produce fiber-enriched products. In this study, dietary fiber (DF) was isolated from Doum fruit by exploiting the combination of microwave reactor technique and superfine grinding technology. The isolated Doum dietary fiber (DDF) possessed a high content of total dietary fiber, essential minerals and total polyphenols with good antioxidant activity. Biscuits were prepared by substituting wheat flour with DDF at different levels (0, 2.5, 5, 7.5 and 10%) and assessed for dough mixing properties and biscuit quality. The results showed that an increase of DDF in the flour affected physical parameters of biscuits by increasing the biscuits hardness and reducing the diameter, thickness and spread ratio. Supplementation of biscuits with DDF improved the nutritional value in terms of DF contents and essential minerals. Improvement in total phenolic contents (TPC) and antioxidant activities of the biscuits were also noted as a result of DDF supplementation. Biscuits supplemented with 7.5% DDF showed overall better sensorial characteristics. Conclusively, this study has shown that supplementation of wheat flour with DDF improved nutritional profile, antioxidant properties and overall consumer acceptability of biscuits. The present findings will be helpful regarding the development of functional foods enriched with DDF.

Driving Forces for Accumulation of Cellulose Nanofibrils at the Oil/Water Interface.

Understanding the adsorption and organization of nanocelluloses at oil/water interfaces is crucial to develop a promising route to fabricate functional materials from the bottom-up. Here, we prepare acetylated cellulose nanofibrils (CNFs) with 2 degrees of substitution and investigate their assembly behavior at the oil/water interface. We study the adsorption process by tracking the dynamic interfacial tension using pendant drop tensiometry and further characterize the viscoelasticity of the CNF interfacial films as a function of ionic strength. The results show that the adsorption of the CNFs at the interface is dominated by energy barriers associated with electrostatic repulsion. With the addition of NaCl, the fibrils are rapidly accumulated at the oil/water interface and jammed into a solidlike film. The overall accumulation of the fibrils is related to the competition between van der Waals attractive forces and electrostatic repulsive forces according to the Derjaguin-Landau-Verwey-Overbeek theory. By screening on the fibril-fibril and fibril-interface electrostatic repulsive forces, the salt addition facilitates the formation of packed fibril clusters and the development of the clusters into a solidlike film. Moreover, the salt addition is assumed to trigger an abrupt density fluctuation in the vicinity of the interface (the formation of locally dense clusters and voids), leading to an increase in brittleness of the film.

Evaluation of the extent of initial Maillard reaction during cooking some vegetables by direct measurement of the Amadori compounds.

BACKGROUND: During vegetable cooking, one of the most notable and common chemical reactions is the Maillard reaction, which occurs as a result of thermal treatment and dehydration. Amadori compound determination provides a very sensitive indicator for early detection of quality changes caused by the Maillard reaction, as well as to retrospectively assess the heat treatment or storage conditions to which the product has been subjected. In this paper, a hydrophilic interaction liquid chromatographic-electrospray ionization-tandem mass spectrometric method was developed for the analysis of eight Amadori compounds, and the initial steps of the Maillard reaction during cooking (steaming, frying and baking) bell pepper, red pepper, yellow onion, purple onion, tomato and carrot were also assessed by quantitative determination of these Amadori compounds. RESULTS: These culinary treatments reduced moisture and increased the total content of Amadori compounds, which was not dependent on the type of vegetable or cooking method. Moreover, the effect of steaming on Amadori compound content and water loss was less than that by baking and frying vegetables. Further studies showed that the combination of high temperature and short time may lead to lower formation of Amadori compounds when baking vegetables. CONCLUSION: Culinary methods differently affected the extent of initial Maillard reaction when vegetables were made into home-cooked products. © 2017 Society of Chemical Industry.

Preparation and characterization of Dendrobium officinale powders through superfine grinding.

BACKGROUND: Dendrobium officinale has been used in China for several thousand years as a health food and has become one of the most expensive tea materials worldwide as a result of extremely scarce resources in the wild and an increasing demand. Hence, it is very important to improve the depth and width of its application. In the present study, the physico-chemical, surface chemistry and thermal properties of micron range particles and coarse particles prepared by superfine grinding and shear pulverization were investigated. RESULTS: As the particle size decreased, the specific surface area of D. officinale powders increased significantly. Microscopy observations confirmed that superfine grinding effectively changed the original structure of D. officinale. The Fourier transform infrared spectroscopy spectra depicted the characteristic bands shifted in terms of absorbance and/or wave number as the powder particle size decreased. The crystallinity and intensity of the crystal peaks of D. officinale powders increased as the particle size decreased. Moisture sorption isotherms suggested that superfine powders were more unstable as a result of the increase in surface area, as well as the exposure of polar groups. CONCLUSION: The results of the present study suggest that superfine grinding may provide new methods of processing for D. officinale with respect to further enhancement of its application value. © 2017 Society of Chemical Industry.

Protective Effects of Lepidium meyenii (Maca) Aqueous Extract and Lycopene on Testosterone Propionate-Induced Prostatic Hyperplasia in Mice.

The inhibitory effect of maca extractant, lycopene, and their combination was evaluated in benign prostatic hyperplasia (BPH) mice induced by testosterone propionate. Mice were divided into a saline group, solvent control group and testosterone propionate-induced BPH mice [BPH model group, solvent BPH model group, benzyl glucosinolate group (1.44 mg/kg), maca group (60 mg/kg), lycopene treated (15, 5, and 2.5 mg/kg), maca (30 mg/kg) combine lycopene treated (7.5, 2.5, and 1.25 mg/kg), and finasteride treated]. Benzyl glucosinolate was used in order to evaluate its pharmacological activity on BPH to find out whether it is the major active component of maca aqueous extract. Finasteride was used as positive control. The compounds were administered once for 30 successive days. Compared with solvent BPH model group, BPH mice fed with maca (30 mg/kg) and lycopene (7.5 mg/kg) combination exhibited significant reductions in the prostatic index, prostatic acid phospatase, estradiol, testosterone, and dihydrotestosterone levels in serum. They also had similar histological compared with those aspects observed in the mice in the solvent control group. The results indicated that combination of maca and lycopene synergistically inhibits BPH in mice. Copyright © 2017 John Wiley & Sons, Ltd.

Direct UV determination of Amadori compounds using ligand-exchange and sweeping capillary electrophoresis.

The detection of Amadori compounds poorly absorbing in the UV region is challenging. To cope with this problem, a simple and effective method using ligand-exchange and sweeping capillary electrophoresis was first developed. With this method, Amadori compounds can be detected by UV at 236 nm without derivatization steps and separated based on the stable levels of Amadori compound-Cu(2+) complexes. Under optimal conditions with background electrolyte of 50 mmol/L copper sulfate, pH 3.94, and separation voltage 25 kV, baseline separations of the following five Amadori compounds, N-(1-deoxy-D-fructos-1-yl) valine (Fru-Val), N-(1-deoxy-D-fructos-1-yl) leucine (Fru-Leu), N-(1-deoxy-D-fructos-1-yl) alanine (Fru-Ala), N-(1-deoxy-D-fructos-1-yl) methionine (Fru-Met), N-(1-deoxy-D-fructos-1-yl) glutamic acid (Fru-Glu), were achieved within a 20 min run. The method was applied to analyze these Amadori compounds in two tomato products. Fru-Glu could be quantitated sensitively down to 0.706 mg/L in MS powder (a kind of tomato powder), 0.726 mg/L in MS liquid (a kind of concentrated tomato juice), and the limit of quantification for the others ranged from 0.792 to 1.084 mg/L. The most abundant Amadori compound was Fru-Glu (1057.5 mg/100 g) in MS powder; however, Fru-Met was rarely detected in MS liquid. The accuracy of the method was tested by recovery measurement of the spiked samples, which yielded good results (94.2-106.0%) with relative standard deviation lower than 5%. Simultaneously, the method was also applied in the analysis of Fru-Glu content during a tomato puree evaporating concentration process. The first significant increase in Fru-Glu content coincided with the increment rate of soluble solids, which indicated that fast evaporation of water could be a critical step for the formation of Amadori compounds. These results show that this method is convenient and reliable for rapid analysis of Amadori compounds in tomato products.

Blocking and Blending: Different Assembly Models of Cyclodextrin and Sodium Caseinate at the Oil/Water Interface.

The stability of cyclodextrin (CD)-based emulsions is attributed to the formation of a solid film of oil-CD complexes at the oil/water interface. However, competitive interactions between CDs and other components at the interface still need to be understood. Here we develop two different routes that allow the incorporation of a model protein (sodium caseinate, SC) into emulsions based on ß-CD. One route is the components adsorbed simultaneously from a mixed solution to the oil/water interface (route I), and the other is SC was added to a previously established CD-stabilized interface (route II). The adsorption mechanism of ß-CD modified by SC at the oil/water interface is investigated by rheological and optical methods. Strong sensitivity of the rheological behavior to the routes is indicated by both steady-state and small-deformation oscillatory experiments. Possible ß-CD/SC interaction models at the interface are proposed. In route I, the protein, due to its higher affinity for the interface, adsorbs strongly at the interface with blocking of the adsorption of ß-CD and formation of oil-CD complexes. In route II, the protein penetrates and blends into the preadsorbed layer of oil-CD complexes already formed at the interface. The revelation of interfacial assembly is expected to help better understand CD-based emulsions in natural systems and improve their designs in engineering applications.

Salting-out and salting-in: competitive effects of salt on the aggregation behavior of soy protein particles and their emulsifying properties.

Emulsions stabilized by protein particles have gained increasing research attention due to their combined advantages of biocompatibility and superior stability. In this study, colloidal particles consisting of soy protein isolates (SPIs) prepared through a heat-treatment procedure are used to make oil-in-water emulsions at a protein concentration of 10 g L(-1) and a pH of 5.91. We investigate parallelly the effects of NaCl on the stability and rheological properties of the particle suspensions and their stabilized emulsions at salt concentrations of 0, 100 and 400 mM. The aggregation behavior of the particles is strongly dependent on the NaCl concentration, showing signs of sedimentation at low NaCl concentration (100 mM) but redispersion again at high NaCl concentration (400 mM). The extensive particle aggregation is beneficial to the formation of a continuous interfacial film for the emulsions, and hence results in a remarkable increase of creaming stability and interfacial viscoelastic moduli. The results can be explained in terms of two competitive effects of NaCl: salting-out and salting-in, which are attributed to complex electrostatic interactions between the particles as a function of NaCl concentration. The delicate balance between salting-out and salting-in provides an interesting insight into the nature of underlying protein particle interactions in aqueous suspensions and a possible mechanism for tailoring their emulsifying properties via salt effects.

Effects of Low Temperature-Ultrasound-Papain (LTUP) Combined Treatments on Purine Removal from Pork Loin and Its Influence on Meat Quality and Nutritional Value.

A combined pretreatment method of "low temperature-ultrasound-papain" (LTUP) was proposed to remove the purine of pork loins. Compared with untreated pork loin, under optimal conditions (temperature 58 °C, ultrasound density 100 W/cm2, and papain concentration 0.085%), the purine removal rate of treated pork loin could reach 59.29 ± 1.39%. The meat quality of pork loin treated with the LTUP method such as hardness and chewiness decreased by 58.37% and 64.38%, respectively, and the in vitro protein digestibility was increased by 19.64%; the cooking loss was decreased by 15.45%, compared with the simulated household blanching process (HT). In view of the high purine removal rate, the losses of free amino acids and soluble peptides were acceptable and reasonable. SEM and LF-NMR results showed that low temperature and ultrasound combined with papain treatment opened a channel for purine transfer and promoted purine dissolution by affecting the protein structure of pork loin. In addition, the migration of water within the muscle tissue was also related to purine removal. In summary, LTUP is recommended as an efficient and green way for the meat industry to remove purine.

Aqueous preparation of arginyl-fructosyl-glucose (a maltose-arginine AC) and determination of Amadori compounds (ACs) in red ginseng by ultra-high performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS).

Amadori compounds (ACs) are key Maillard intermediates in various foods after thermal processing, and are also important non-saponin components in red ginseng. Currently, due to the difficulty in obtaining AC standards, the determination of multiple ACs is limited and far from optimal. In this study, an ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed and validated. A green synthetic method was developed for arginyl-fructosyl-glucose (AFG), the major AC in red ginseng with potential health benefits. The UPLC-MS/MS method was then applied in identification and quantification of ACs in red ginseng samples, which showed for the first time that 12 other ACs also exist in red ginseng in addition to AFG and arginyl-fructose (total 98.88 % of all ACs). Contents of AFG and arginyl-fructose in whole red ginseng were 36.23 and 10.80 mg/g dry weight, respectively. Raw ginseng can be steamed and then dried whole to obtain whole red ginseng, or sliced before drying to obtain sliced red ginseng. Slicing before drying was found to reduce ACs content. Results of the present study will help to reveal the biological functions of red ginseng and related products associated with ACs and promote the standardization of red ginseng manufacture.