Aberrant activation of Notch1 signaling in the mouse uterine epithelium promotes hyper-proliferation by increasing estrogen sensitivity.

In mammals, the endometrium undergoes dynamic changes in response to estrogen and progesterone to prepare for blastocyst implantation. Two distinct types of endometrial epithelial cells, the luminal (LE) and glandular (GE) epithelial cells play different functional roles during this physiological process. Previously, we have reported that Notch signaling plays multiple roles in embryo implantation, decidualization, and postpartum repair. Here, using the uterine epithelial-specific Ltf-iCre, we showed that Notch1 signaling over-activation in the endometrial epithelium caused dysfunction of the epithelium during the estrous cycle, resulting in hyper-proliferation. During pregnancy, it further led to dysregulation of estrogen and progesterone signaling, resulting in infertility in these animals. Using 3D organoids, we showed that over-activation of Notch1 signaling increased the proliferative potential of both LE and GE cells and reduced the difference in transcription profiles between them, suggesting disrupted differentiation of the uterine epithelium. In addition, we demonstrated that both canonical and non-canonical Notch signaling contributed to the hyper-proliferation of GE cells, but only the non-canonical pathway was involved with estrogen sensitivity in the GE cells. These findings provided insights into the effects of Notch1 signaling on the proliferation, differentiation, and function of the uterine epithelium. This study demonstrated the important roles of Notch1 signaling in regulating hormone response and differentiation of endometrial epithelial cells and provides an opportunity for future studies in estrogen-dependent diseases, such as endometriosis.

Fluorine-Containing Triblock Copolymer Vesicles with Microphase-Separated Structure.

Introduction of a fluorine-containing block into block copolymers is an effective method to tune block copolymer nanoassemblies with a microphase-separated structure. However, this microphase-separated structure is difficult to clearly observe due to its nanoscale size. In this work, fluorine-containing ABC triblock copolymer vesicles of poly(ethylene glycol)-block-polystyrene-block-poly(4-vinylbenzyl pentafluorophenyl ether) (PEG-b-PS-b-PVBFP) are synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization under dispersed condition. Owing to the choice of a suitable degree of polymerization of the three blocks, the synthesized PEG45-b-PS197-b-PVBFP233 vesicles have a relatively large size of around 216 nm and a thin vesicular membrane with a thickness of around 28 nm. Ascribed to the relatively large size of the vesicles and the thin vesicular membrane, it is concluded that the fluorine-containing PVBFP block forms 9 nm columnar microdomains shielded by the PS phase in the vesicular membrane.

A Versatile Assembly Approach toward Multifunctional Supramolecular Poly(Ionic Liquid) Nanoporous Membranes in Water.

Hydrogen (H)-bonding-integration of multiple ingredients into supramolecular polyelectrolyte nanoporous membranes in water, thereby achieving tailor-made porous architectures, properties, and functionalities, remains one of the foremost challenges in materials chemistry due to the significantly opposing action of water molecules against H-bonding. Herein, a strategy is described that allows direct fusing of the functional attributes of small additives into water-involved hydrogen bonding assembled supramolecular poly(ionic liquid) (PIL) nanoporous membranes (SPILMs) under ambient conditions. It discloses that the pore size distributions and mechanical properties of SPILMs are rationally controlled by tuning the H-bonding interactions between small additives and homo-PIL. It demonstrates that, benefiting from the synergy of multiple noncovalent interactions, small dye additives/homo-PIL solutions can be utilized as versatile inks for yielding colorful light emitting films with robust underwater adhesion strength, excellent stretchability, and flexibility on diverse substrates, including both hydrophilic and hydrophobic surfaces. This system provides a general platform for integrating the functional attributes of a diverse variety of additives into SPILMs to create multifunctional and programmable materials in water.

Large-Scale and Controllable Syntheses of Covalently-Crosslinked Poly(ionic liquid) Nanoporous Membranes.

Herein, we report an exciting synthetic procedure for the scalable and controllable fabrication of covalently crosslinked poly(ionic liquid) (PIL) nanoporous membranes (CPILMs) in water solution under ambient conditions. We found that the pore sizes, flexibility and compositions of freestanding CPILMs can be finely tailored by a rational structural choice of PIL, diketone and aldehyde. Studies on the CPILM formation mechanism revealed that hydrogen bonding-induced phase separation of amino-functionalized homo-PIL between its polar and apolar domains coupled with structural rearrangements due to the Debus Radsizewski reaction-triggered ambient covalent crosslinking process created a stable three-dimensionally interconnected pore system in water solution. Employing structurally stable CPILMs in ion sieving devices resulted in an excellent Li+ /Mg2+ separation efficiency due to the positively charged nature and "Donann" effects. This green, facile yet versatile approach to the production of CPILMs is a conceptually distinct and commercially interesting strategy for making useful nanoporous functional polyelectrolyte membranes.

Synthesis of Cross-Linked Block Copolymer Nanoassemblies and their Coating Application.

Since the discovery of polymerization-induced self-assembly (PISA), convenient synthesis of concentrated block copolymer nanoassemblies dispersed in solvent has been achieved. Now, application of block copolymer nanoassemblies should be paid more attention. In this study, corona-cross-linked block copolymer nanoparticles of poly[dimethylacrylamide-co-(diacetone acrylamide)]-b-polystyrene [P(DMA-co-DAAM)-b-PS] containing the poly(DAAM) segment in the hydrophilic P(DMA-co-DAAM) block are synthesized initially by PISA following dispersion reversible addition-fragmentation chain transfer polymerization and then by covalent intraparticle cross-linking through the poly(DAAM) segment and adipic acid dihydrazide. Coating application of the corona-cross-linked block copolymer nanoassemblies is tried, and much higher water resistance of the corona-cross-linked block copolymer nanoassemblies than that of the linear block copolymer nanoassemblies is demonstrated.

Zearalenone affects the growth of endometriosis via estrogen signaling and inflammatory pathways.

Endometriosis is a chronic, inflammatory, estrogen-dependent gynecological disease characterized by the growth of endometrial stromal cells and glands outside the uterine cavity in response to hormones, which commonly occurs in reproductive-age women. Zearalenone (ZEA) is a toxic metabolite produced by Fusarium, which acts as estrogen activity because of the similarity of its structure to estrogen. In this study, we used an endometriosis mouse model: 15 days after ovariectomy, endometrial fragments were sutured on the pelvic wall, and exogenous estrogen was supplied using an estrogen-releasing silicone tube embedded subcutaneously. Mice were treated with different doses of ZEA by gavage for 21 days. The results show that ZEA significantly inhibited the growth of ectopic endometrium in a dose-dependent manner. The proliferation of cells decreased while apoptosis increased in the ectopic tissues of ZEA-treated mice compared to the vehicle group. The expression of estrogen receptor-α and its downstream targets MUC1 and p-AKT decreased, indicating an impaired estrogen signaling activity by ZEA treatment. In addition, the decreased expression of pro-inflammatory cytokine Tnf-α, Il-1ß, and Il-6, the lower number of macrophages and neutrophils cells, and the inhibited NF-κB signaling pathway suggest the inflammatory response in the ectopic endometrium was also suppressed by ZEA treatment. However, when the exogenous estrogen supply is removed, ZEA, in turn, plays an estrogen-like role that promotes cell proliferation in the ectopic endometrium. In summary, our data suggest ZEA acts as an antagonist in endometriotic tissue when estrogen is sufficient but turns to estrogenic activity in the absence of estrogen in the development of endometriosis. ZEA also inhibits ectopic tissue growth by inhibiting inflammatory response in the endometriosis model.

Single-Step Expeditious Synthesis of Diblock Copolymers with Different Morphologies by Lewis Pair Polymerization-Induced Self-Assembly.

Lewis pair polymerization has demonstrated its unique advantages and powerful capability in polymer synthesis. Here we employ strong nucleophilic N-heterocyclic olefin (NHO) and bulky organoaluminum to construct a frustrated Lewis pair, which can realize the compounded sequence control (CSC) copolymerization and self-assembly the mixture of dimethylaminoethyl acrylate and fluoride-functionalized methacrylate into diblock copolymers (di-BCPs) nano-assemblies through polymerization-induced self-assembly in one-pot, single-step manner within minutes. These di-BCPs were characterized by 1 H and 13 C NMR, GPC, DSC, and TEM. By utilizing appropriate solvophilic block and solvophobic block, such Lewis pair polymerization-induced self-assembly strategy enables the expeditious, room-temperature synthesis of di-BCP nanoparticles with different morphologies, including spheres, worms, vesicles, and even fibers, thus suggesting the great application potential of such method in the future.

Thermoresponsive Polymers Based on Tertiary Amine Moieties.

Thermoresponsive polymers exhibiting unique reversible phase transition properties in aqueous solution in response to temperature stimuli have been extensively investigated. In the past two decades, thermoresponsive polymers based on tertiary amine moieties have achieved considerable progress and become an important family of thermoresponsive polymers, including tertiary amine functionalized poly((meth)acrylamide)s, poly((meth)acrylate)s, poly(styrene)s, poly(vinyl alcohol)s, and poly(ethylene oxide)s, which exhibit lower critical solution temperature and/or upper critical solution temperature in water or aliphatic alcohols. Their phase transition behavior can be modulated by the solution pH and CO2 due to the protonation of tertiary amine moieties in acidic condition and deprotonation in alkaline condition and the charged ammonium bicarbonate formed by the tertiary amine moieties and CO2 . The aim of this review is to summarize the recent progress in the thermoresponsive polymers based on tertiary amine moieties.

Selective adsorption of PHC and regeneration of washing effluents by modified diatomite.

Selective removal of petroleum hydrocarbons (PHCs) from soil washing effluents is the key to the surfactant-enhanced soil washing technology. In this study, the diatomite was modified by nonionic surfactant TX-100 and applied in the selective adsorption of PHCs in the soil washing effluents. The modified diatomites were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, N2 adsorption/desorption and X-ray photoelectron spectroscopy respectively. The adsorption process followed the pseudo-second-order model and the adsorption isotherms indicated that the interaction between PHCs and modified diatomite was monolayer adsorption. The important operating factors such as TX-100 dosage, adsorbent dosage, time and temperature were optimized. With the participation of the low-cost adsorbent TX3-Db with high adsorption capacity, the recovery efficiency of the washing effluents was still up to 78.9% after three cycles. A selective adsorption mechanism, based on steric hindrance and electrostatic repulsion, was proposed to explain the removal of PHCs from washing effluents.

ICAR ATRP in PEG with Low Concentration of Cu(II) Catalyst: A Versatile Method for Synthesis of Block Copolymer Nanoassemblies under Dispersion Polymerization.

A versatile method for synthesis of block copolymer nanoassemblies via initiators for continuous activator regeneration (ICAR) atom transfer radical polymerization (ATRP) dispersion polymerization in a low molecular weight poly(ethylene glycol) (PEG) is discussed. This ICAR ATRP dispersion polymerization uses a low concentration of CuBr2 catalyst, which is stable under atmospheric conditions and is soluble in most polar solvents and employs a polymerization medium of viscous and nonvolatile PEG. Through this ICAR ATRP dispersion polymerization, various block copolymer nanoassemblies, including poly(ethylene glycol)-block-polystyrene, poly(ethylene glycol)-block-poly(methyl methacrylate), and poly(2-hydroxypropyl methacrylate)-block-poly(methyl methacrylate), have been synthesized. The parameters affecting the size and morphology of the block copolymer nanoassemblies are briefly discussed.

Switchable Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization with the Assistance of Azobenzenes.

Modulating controlled radical polymerization is an interesting and important issue. Herein, modulating RAFT polymerization employing photosensitive azobenzenes is achieved. In the presence of azobenzenes and with visible light off, RAFT polymerization runs smoothly and follows a pseudo-first-order kinetics. In contrast, with light on, RAFT polymerization is greatly decelerated or quenched depending on the type and concentration of azobenzenes. Switchable RAFT polymerization of different (meth)acrylate monomers alternatively with light off and on is demonstrated. A mechanism of photoregulating RAFT polymerization involving radical quenching by azobenzenes is proposed.

Peptide-crosslinked molecularly imprinted polymers for efficient separation of immunoglobulin G from human serum.

Low-cost and highly effective methods are highly desirable to replace the costly ethanol fractionation and affinity chromatography in IgG isolation from human plasma. Molecularly imprinted polymers (MIPs) of IgG are potential candidates, however, they still suffer from severe problems such as difficult template removal and low imprinting efficiency. Here, a recently developed strategy was adopted to overcome these problems. The MIPs were synthesized using poly(L-glutamic acid) (PLGA) peptide crosslinkers instead of commonly used crosslinkers, such as N,N-methylenebisacrylamide (BIS). Because of the pH-induced helix-coil transition and the precise folding of the peptide segments in the polymers, the imprint cavities can be enlarged by adjusting the pH from 5.0 to 7.0, but their original size and shape are restored when the pH is adjusted back. Therefore, the IgG template can be eluted completely under mild conditions, and significantly improved imprinting efficiency can be achieved. Compared with BIS-crosslinked MIP, 8.6 times more binding sites can be created by molecular imprinting PLGA-crosslinked MIP. The factors influencing the performance of the MIP were studied systematically. An optimized MIP with a high adsorption capacity (612.5 mg g-1), high IF (4.92), and high selectivity was obtained. The adsorption capacity and selectivity of the MIP are much higher than the previously reported IgG MIPs. Because of its high adsorption capacity and selectivity, it can separate IgG from human serum effectively, affording high purity products.

Distinguish Characters of Luminal and Glandular Epithelium from Mouse Uterus Using a Novel Enzyme-Based Separation Method.

The uterine luminal epithelium, glandular epithelium, and stromal cells are vital for the establishment of pregnancy. Previously studies have shown various methods to isolate mouse uterine epithelium and stromal cells, including laser capture microdissection (LCM), enzyme digestion, and immunomagnetic beads. Despite the importance of the endometrial epithelium as the site of implantation and nutritional support for the conceptus, there is no isolated method to separate the luminal epithelium and glandular epithelium. Here, we establish a novel enzyme-based way to separate two types of epithelium and keep their viability. In this article, we analyzed their purity by mRNA level, immunostaining, and transcriptome analysis. Our isolation method revealed several unstudied luminal and glandular epithelial markers in transcriptome analysis. We further demonstrated the viability of the isolated epithelium by 2D and 3D cultures. The results showed that we successfully separated the endometrial luminal epithelium and glandular epithelium. We also provided an experimental model for the following study of the physiological function of the different parts of the uterus and related diseases.

Multifunctional Underwater Adhesive Film Enabled by a Single-Component Poly(ionic liquid).

Tremendous efforts have been devoted to exploiting synthetic wet adhesives for real-life applications. However, developing low-cost, robust, and multifunctional wet adhesive materials remains a considerable challenge. Herein, a wet adhesive composed of a single-component poly(ionic liquid) (PIL) that enables fast and robust underwater adhesion is reported. The PIL adhesive film possesses excellent stretchability and flexibility, enabling its anchoring on target substrates regardless of deformation and water scouring. Surface force measurements show the PIL can achieve a maximum adhesion of 56.7 mN·m-1 on diverse substrates (both hydrophilic and hydrophobic substrates) in aqueous media, within ∼30 s after being applied. The adhesion mechanisms of the PIL were revealed via the force measurements, and its robust wet adhesive capacity was ascribed to the synergy of different non-covalent interactions, such as of hydrogen bonding, cation-π, electrostatic, and van der Waals interactions. Surprisingly, this PIL adhesive film exhibited impressive underwater sound absorption capacity. The absorption coefficient of a 0.7 mm-thick PIL film to 4-30 kHz sound waves could be as high as 0.80-0.92. This work reports a multifunctional PIL wet adhesive that has promising applications in many areas and provides deep insights into interfacial interaction mechanisms underlying the wet adhesion capability of PILs.

Synthesis of hierarchical hollow silica microspheres containing surface nanoparticles employing the quasi-hard template of poly(4-vinylpyridine) microspheres.

A facile method of preparing hierarchical hollow silica microspheres containing surface silica nanoparticles (HHSMs) through the sol-gel process of tetraethylorthosilicate employing a quasi-hard template of non-cross-linking poly(4-vinylpyridine) microspheres is proposed. The quasi-hard template contains the inherent catalyst of the basic pyridine group, and a few of the polymer chains can escape from the template matrix into the aqueous phase, which initiates the sol-gel process spontaneously both on the surface of the template used to prepare the hollow silica shell and in the aqueous phase to produce the surface silica nanoparticles. By tuning the weight ratio of the silica precursor to the quasi-hard template, HHSMs with a size of about 180 nm and a shell thickness ranging from 14 to 32 nm and surface silica nanoparticles ranging from 17 to 36 nm are produced initially through the deposition of surface silica nanoparticles onto the silica shell, followed by template removal either by calcination or solvent extraction. The synthesized HHSMs are characterized, and a possible mechanism for the synthesis of HHSMs is proposed.

Covalent assembly of hierarchical particles by efficient coupling of ß-diketones and benzyl chloride.

A coupling reaction is performed between polymeric nanoparticles and microparticles via the nucleophilic substitution of pendent ß-diketone groups with benzyl chloride. The coupling reaction results in the formation of hierarchical particles, through the nanoparticles being covalently linked onto the microparticles. The coupling reaction is tracked by TEM and SEM, and the formation of covalent C-C bonds through the coupling reaction between the polymeric nanoparticles and microparticles is confirmed by solid-state (13)C CP-MAS NMR spectroscopy and XPS. The proposed coupling reaction between the nanoparticles and the microparticles is believed to be a promising strategy in particle-surface modification.

Notch1 signaling enhances collagen expression and fibrosis in mouse uterus.

Fibrosis is a pathological process characterized by abnormal activation of fibroblasts with increased synthesis of extracellular matrix components, including collagens. It may lead to loss of proper tissue architecture and organ function in clinical diseases such as systemic sclerosis and liver fibrosis. Excess accumulation of collagens is considered the primary indicator of fibrosis. Notch signaling has been reported to be involved in the fibrosis of many different organs, including the liver. Our previous study showed that the uterine-specific over-activation of canonical Notch1 signaling in the mouse uterus (Pgrcre/+ Rosa26N1ICD/+ , OEx) results in complete infertility as a consequence of multiple developmental and physiological defects, together with increased collagen accumulation evidenced by Masson's staining. In this study, we further detected expressions of all 44 collagen genes in these Notch1 gain-of-function transgenic mice and found that 18 collagens have been largely affected. In another aspect, using an intrauterine adhesion model (IUA), we mimicked fibrosis in the mouse uterine. The results suggested that Notch receptors were upregulated only 3 days after induction, and most of the fibril-forming collagen began to upregulate 6 days after the surgery. Furthermore, when induced IUA in the N1ICD-OEx mice, the expression of collagens and fibrosis levels were significantly enhanced. At last, as a Notch signaling inhibitor, the γ-secretase inhibitor N-[N-(3,5-difl uorophenacetyl)-L-alanyl]-S-phenylglycine t-butyl ester (DAPT) pretreatment could alleviate the expression of collagens and the symptoms of fibrosis. These results demonstrate that Notch signaling may play a role in upregulating collagens expression in endometrial fibrosis and might be a potential target of fibrosis therapy in the endometrium.

Thermoresponsive Polymers of Poly(2-(N-alkylacrylamide)ethyl acetate)s.

Thermoresponsive poly(2-(N-alkylacrylamide) ethyl acetate)s with different N-alkyl groups, including poly(2-(N-methylacrylamide) ethyl acetate) (PNMAAEA), poly(2-(N-ethylacrylamide) ethyl acetate) (PNEAAEA), and poly(2-(N-propylacrylamide) ethyl acetate) (PNPAAEA), as well as poly(N-acetoxylethylacrylamide) (PNAEAA), were synthesized by solution RAFT polymerization. Unexpectedly, it was found that there are induction periods in the RAFT polymerization of these monomers, and the induction time correlates with the length of the N-alkyl groups in the monomers and follows the order of NAEAA < NMAAEA < NEAAEA < NPAAEA. The solubility of poly(2-(N-alkylacrylamide) ethyl acetate)s in water is also firmly dependent on the length of the N-alkyl groups. PNPAAEA including the largest N-propyl group is insoluble in water, whereas PNMAAEA and PNEAAEA are thermoresponsive in water and undergo the reversible soluble-to-insoluble transition at a critical solution temperature. The cloud point temperature (Tcp) of the thermoresponsive polymers is in the order of PNEAAEA < PNAEAA < PNMAAEA. The parameters affecting the Tcp of thermoresponsive polymers, e.g., degree of polymerization (DP), polymer concentration, salt, urea, and phenol, are investigated. Thermoresponsive PNMAAEA-b-PNEAAEA block copolymer and PNMAAEA-co-PNEAAEA random copolymers with different PNMAAEA and/or PNEAAEA fractions are synthesized, and their thermoresponse is checked.

Catalytic degradation of TCE by a PVDF membrane with Pd-coated nanoscale zero-valent iron reductant.

Trichloroethylene (TCE) has serious threat to ecosystem. Fe-Pd nanoparticles (NPs) are good materials for catalytic degradation of TCE but still face severe challenges including easy fouling, agglomeration, deactivation and difficult separation and reuse etc. To overcome these drawbacks, we have constructed a novel structured PVDF/Fe-Pd NPs composite membrane with nanosized surface pores to execute the TCE degradation. Results indicate the degradation shows pseudo first-order reaction kinetics and high degradation rate in the static state degradation. Furthermore, the degradation ability can be enhanced by increasing Fe and Pd contents, the degradation temperature or decreasing the degradation pH value. However, the degradation is essentially limited by the diffusion. Thus, the cross-flow degradation is further applied to promote the diffusion. By this operating model, the degradation ability of the composite membrane can be greatly improved. More importantly, the reactants always keep the purity in the membrane surface side and can be controlled to enter the membrane pore for catalytic degradation. Thus, products can be timely discharged via the membrane pores and the side reactions between reactants and products can be largely reduced. In addition, the nanosized surface pores can also prevent the Fe-Pd NPs from being fouled. In a word, the novel composite membrane shows strong degradation ability, good stability and convenient operating ability for the TEC catalytic degradation.