RESUMEN
Dynamic 3D covalent organic frameworks (COFs) have shown concerted structural transformation and adaptive gas adsorption due to the conformational diversity of organic linkers. However, the isolation and observation of COF rotamers constitute undergoing challenges due to their comparable free energy and subtle rotational energy barrier. Here, we report the atomic-level observation and structural evolution of COF rotamers by cryo-3D electron diffraction and synchrotron powder X-ray diffraction. Specifically, we optimize the crystallinity and morphology of COF-320 to manifest its coherent dynamic responses upon adaptive inclusion of guest molecules. We observe a significant crystal expansion of 29 vol% upon hydration and a giant swelling with volume change up to 78 vol% upon solvation. We record the structural evolution from a non-porous contracted phase to two narrow-pore intermediate phases and the fully opened expanded phase using n-butane as a stabilizing probe at ambient conditions. We uncover the rotational freedom of biphenylene giving rise to significant conformational changes on the diimine motifs from synclinal to syn-periplanar and anticlinal rotamers. We illustrate the 10-fold increment of pore volumes and 100% enhancement of methane uptake capacity of COF-320 at 100 bar and 298 K. The present findings shed light on the design of smarter organic porous materials to maximize host-guest interaction and boost gas uptake capacity through progressive structural transformation.
RESUMEN
Dynamic 3D covalent organic frameworks (dynaCOFs) have shown concerted structural transformation and responses upon adaptive guest adsorption. The multivariate (MTV) strategy incorporating multiple functionalities within a backbone is attractive for tuning the framework flexibility and dynamic responses. However, a major synthetic challenge arises from the different chemical reactivities of linkers usually resulting in phase separation. Here, we report a general synthetic protocol for making 3D MTV-COFs by balancing the linker reactivity and solvent polarity. Specifically, 15 crystalline and phase pure MTV-COF-300 isostructures are constructed by linking a tetrahedral unit with eight ditopic struts carrying various functional groups. We find that the electron-donating groups make the linker reactivity too low to allow the reaction to proceed fully, while the electron-withdrawing groups afford increased reactivity and hardly yield crystalline materials. To overcome the crystallization dilemma, the combination of polar aprotic with nonpolar solvents was used to improve the solubility of oligomers and slow the reaction kinetics in MTV-COF synthesis. We demonstrate the abilities of these MTV-COFs to tune gas dynamic behaviors and the separation of benzene and cyclohexane. These findings reveal the integration of multivariate functionalities into dynaCOFs with on-demand flexibility to achieve dynamic synergism in particular applications, outperforming their pure, monofunctional counterparts.
RESUMEN
Eco-friendly photocatalysts for water splitting, highly efficient in oxygen/hydrogen evolution reactions, hold great promise for the storage of inexhaustible solar energy and address environmental challenges. However, current common photocatalysts rarely exhibit both H2 and O2 production performances unless some regulatory measures, such as strain engineering, are implemented. Additionally, the extensive utilization of flexible electronics remains constrained by their high Young's modulus. Herein, on the basis of density functional theory calculations, we identify a novel spontaneous oxygen-producing two-dimensional Ca(BiO2)2 material, which can efficiently regulate the electronic structures of the surface active sites, optimize the reaction pathways, reduce the reaction energy barriers, and boost the overall water-splitting activity through biaxial strain modulation. In detail, an unstrained Ca(BiO2)2 monolayer not only possesses a suitable band gap value (2.02 eV) to fulfill the photocatalytic water-splitting band edge relationships but also holds favorable transport properties, excellent optical absorption across the visible light spectrum, and spontaneous oxygen production under neutral conditions. More excitingly, under application of a 7% biaxial tensile strain modulation with an ideal biaxial strength of 32.35 GPa nm, the Ca(BiO2)2 monolayer not only maintains its structural integrity but also exhibits a completely spontaneous reaction for photocatalytic hydrogen precipitation with superior optical absorption. This can primarily be attributed to the substantial reduction of the potential barrier through strain engineering as well as the weakening of bond energy resulting from changes of the adsorption site as calculated by crystal orbital Hamiltonian population analysis. This flexible stretchable electronic modulated the photocatalyst behavior and bond energy of O-Bi and O-Ca interactions, offering outstanding potential for photocatalytic water spontaneous oxygen and hydrogen evolution among all of the reported metal oxides, and is more likely to become a promising candidate for future flexible electronic devices.
RESUMEN
Reticular chemistry provides opportunities to design solid-state electrolytes (SSEs) with modular tunability. However, SSEs based on modularly designed crystalline metal-organic frameworks (MOFs) often require liquid electrolytes for interfacial contact. Monolithic glassy MOFs can have liquid processability and uniform lithium conduction, which is promising for the reticular design of SSE without liquid electrolytes. Here, we develop a generalizable strategy for the modular design of noncrystalline SSEs based on a bottom-up synthesis of glassy MOFs. We demonstrate such a strategy by linking polyethylene glycol (PEG) struts and nanosized titanium-oxo clusters into network structures termed titanium alkoxide networks (TANs). The modular design allows the incorporation of PEG linkers with different molecular weights, which give optimal chain flexibility for high ionic conductivity, and the reticular coordinative network provides a controlled degree of cross-linking that gives adequate mechanical strength. This research shows the power of reticular design in noncrystalline molecular framework materials for SSEs.
RESUMEN
Metal-organic framework (MOF)-based mixed matrix membranes (MMMs) have shown great promises to overcome the performance upper limit of polymeric membranes for various gas separation processes. However, the gas separation properties of the MMMs largely depend on the MOF-polymer interfacial compatibility which is a metric difficult to quantify. In most cases, whether a MOF filler and a polymer matrix make a good pair is not revealed until the gas transport experiments are performed. This is because there is a lack of characterization techniques to directly probe the MOF-polymer interfacial compatibility. In this work, we demonstrate a self-sorting method to rank the interface compatibility among several MOF-polymer pairs. By mixing one MOF with two polymers in an MMM, the demixing of two polymers will form two polymer domains. The MOF particles will preferably partition into the "preferred" polymer domain due to their higher interfacial affinity. By scanning different polymer pairs, a rank of MOF-polymer interfacial compatibility from high to low can be obtained. Moreover, based on this ranking, it was also found that a highly compatible MOF-polymer pair suggested by this method also corresponds to a more predictable MMM gas separation performance.
RESUMEN
Soft porous crystals combine flexibility and porosity, allowing them to respond structurally to external physical and chemical environments. However, striking the right balance between flexibility and sufficient rigidity for porosity is challenging, particularly for molecular crystals formed by using weak intermolecular interactions. Here, we report a flexible oxygen-bridged prismatic organic cage molecule, Cage-6-COOH, which has three pillars that exhibit "hinge-like" rotational motion in the solid state. Cage-6-COOH can form a range of hydrogen-bonded organic frameworks (HOFs) where the "hinge" can accommodate a remarkable 67° dihedral angle range between neighboring units. This stems both from flexibility in the noncovalent hydrogen-bonding motifs in the HOFs and the molecular flexibility in the oxygen-linked cage hinge itself. The range of structures for Cage-6-COOH includes two topologically complex interpenetrated HOFs, CageHOF-2α and CageHOF-2ß. CageHOF-2α is nonporous, while CageHOF-2ß has permanent porosity and a surface area of 458 m2 g-1. The flexibility of Cage-6-COOH allows this molecule to rapidly transform from a low-crystallinity solid into the two crystalline interpenetrated HOFs, CageHOF-2α and CageHOF-2ß, under mild conditions simply by using acetonitrile or ethanol vapor, respectively. This self-healing behavior was selective, with the CageHOF-2ß structure exhibiting structural memory behavior.
RESUMEN
Monolayer transition metal dichalcogenides (TMDCs) with direct bandgaps are considered promising candidates for building light-emitting diodes (LEDs). One crucial indicator of their performance is the brightness of electroluminescence (EL). In this study, we fabricate WS2-based LEDs that make full use of the assistance of effective transient-mode charge injection. By introducing self-assembled silver nanoparticles (NPs) on top of the LED, the extraction efficiency is significantly improved, with a 2.9-fold EL enhancement observed in the experiment. Full-wave simulations further confirm that the improvement comes from the scattering capability of silver NPs, with results qualitatively fitting the experiment. This approach, with its compatibility with van der Waals heterostructures, can be further promoted to enhance the brightness of 2D monolayer TMDC-based LEDs.
RESUMEN
The effective conversion and recycling of organic solid waste contribute to the resolution of widespread issues such as global environmental pollution, energy scarcity and resource depletion. The anaerobic fermentation technology provides for the effective treatment of organic solid waste and the generation of various products. The analysis, which is based on bibliometrics, concentrates on the valorisation of affordable and easily accessible raw materials with high organic matter content as well as the production of clean energy substances and high value-added platform products. The processing and application status of fermentation raw materials such as waste activated sludge, food waste, microalgae and crude glycerol are investigated. To analyse the status of the preparation and engineering applications of the products, the fermentation products biohydrogen, VFAs, biogas, ethanol, succinic acid, lactic acid, and butanol are employed as representatives. Simultaneously, the anaerobic biorefinery process with multiple product co-production is sorted out. Product co-production can reduce waste discharge, enhance resource recovery efficiency, and serve as a model for improving anaerobic fermentation economics.
Asunto(s)
Eliminación de Residuos , Residuos Sólidos , Fermentación , Residuos Sólidos/análisis , Anaerobiosis , Alimentos , Aguas del Alcantarillado , BiocombustiblesRESUMEN
Milk is a highly nutritional food rich in protein and fat that is prone to deterioration by oxidation and glycation reactions at storage and processing. In this study, glycation products and lipid oxidation products contents in skim milk, whole milk, and milk fat simulation groups were determined to evaluate the effect of milk fat components on glycation at 120 °C for 60 min. The increase rate of carbonyl compound, main advanced glycation end products (AGEs) levels, and glycation sites number of α-casein and ß-casein are higher in whole milk than that in skim milk, indicating that milk fat promoted protein glycation significantly. In milk fat simulation groups, oleic acid and linoleic acid (LA) were added to milk fat in skim milk proportionally, promoting the formation of glycation products; however, palmitic acid had no such effect. LA exhibited strong promotion on AGEs formation. Lipid oxidation radicals, protein carbonyl amine condensation, and carbonyl compound formation were critical factors for milk glycation, according to OPLS-DA results. Therefore, radicals of fat oxidation are speculated to trigger the early glycation, and carbonyl compounds of fat oxidation act as important intermediates of glycation, fat type, form, and its degradation rate, thus play essential roles in milk glycation. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05658-z.
RESUMEN
Glassy and liquid state metal-organic frameworks (MOFs) are emerging type of materials subjected to intense research for their rich physical and chemical properties. In this report, we obtained the first glassy MOF that involves metal-carboxylate cluster building units via multi-stage structural transformations. This MOF is composed of linear [Mn3 (COO)6 ] node and flexible pyridyl-ethenylbenzoic linker. The crystalline MOF was first perturbed by vapor hydration and thermal dehydration to give an amorphous state, which can go through a glass transition at 505â K into a super-cooled liquid. The super-cooled liquid state is stable through a wide temperature range of 40â K and has the largest fragility index of 105, giving a broad processing window. Remarkably, the super-cooled liquid can not only be quenched into glass, but also recrystallize into the initial MOF when heated to a higher temperature above 558â K. The mechanism of the multi-stage structural transformations was studied by systematic characterizations of in situ X-ray diffraction, calorimetry, rheological, spectroscopic and pair-distribution function analysis. These multi-stage transformations not only represent a rare example of high temperature coordinative recognition and self-assembly, but also provide new MOF processing strategy through crystal-amorphous-liquid-crystal transformations.
RESUMEN
Metal-organic framework (MOF) glasses are a fascinating new class of materials, yet their prosperity has been impeded by the scarcity of known examples and limited vitrification methods. In the work described in this report, we applied synergistic stimuli of vapor hydration and thermal dehydration to introduce structural disorders in interpenetrated dia-net MOF, which facilitate the formation of stable super-cooled liquid and quenched glass. The material after stimulus has a glass transition temperature (Tg) of 560 K, far below the decomposition temperature of 695 K. When heated, the perturbed MOF enters a super-cooled liquid phase that is stable for a long period of time (>104 s), across a broad temperature range (26 K), and has a large fragility index of 83. Quenching the super-cooled liquid gives rise to porous MOF glass with maintained framework connectivity, confirmed by EXAFS and PDF analysis. This method provides a fundamentally new route to obtain glassy materials from MOFs that cannot be melted without causing decomposition.
RESUMEN
Highly efficient hole injection into a AlGaN quantum well is desirable in nitride deep-ultraviolet light-emitting diodes (DUV LEDs) for high optical performance. In this work, we report the observation of enhanced hole injection in the N-polar AlGaN-based DUV LEDs with compositionally graded p-AlxGa1-xN (x = 0.65-0.75) by simulation and show that the enhanced hole injection leads to the increase of the peak internal quantum efficiency (IQE) and the significant reduction of efficiency droop at high current density. This work might activate researchers to realize the efficient polarization p-type doping of N-polar AlGaN with high Al content and thus to achieve high performance DUV LEDs experimentally.
RESUMEN
The electronic character of porphyrin active sites for electrocatalytic reduction of CO2 to CO in a two-dimensional covalent organic framework (COF) was tuned by modification of the reticular structure. Efficient charge transport along the COF backbone promotes electronic connectivity between remote functional groups and the active sites and enables the modulation of the catalytic properties of the system. A series of oriented thin films of these COFs was found to reduce CO2 to CO at low overpotential (550 mV) with high selectivity (faradaic efficiency of 87%) and at high current densities (65 mA/mg), a performance well beyond related molecular catalysts in regard to selectivity and efficiency. The catalysts are stable for more than 12 h without any loss in reactivity. X-ray absorption measurements on the cobalt L-edge for the modified COFs enable correlations between the inductive effects of the appended functionality and the electronic character of the reticulated molecular active sites.
RESUMEN
INTRODUCTION: Neuropathic pain induced by brachial plexus avulsion (BPA) is a pathological condition. We hypothesized that inhibition of histone deacetylase (HDAC) could suppress BPA-induced neuropathic pain through inhibition of transient reception potential (TRP) overexpression and protein kinase B (Akt)-mediated mammalian target of rapamycin (mTOR) activation. METHODS: We generated a rat BPA model; administered HDAC inhibitor tricostatin A (TSA) for 7 days postsurgery; and assessed the effects on HDAC expression, Akt phosphorylation, neuroinflammation, and mTOR activation. RESULTS: TSA treatment alleviated BPA-induced mechanical hyperalgesia, suppressed Akt phosphorylation, and increased HDAC. We found suppressed proinflammatory cytokine levels, TRPV1 and TRPM8 expression, and mTOR activity in TSA-treated BPA rats. DISCUSSION: Our results suggest that altered HDAC and Akt signaling are involved in BPA-induced neuropathic pain and that inhibition of HDAC could be an effective therapeutic approach in reducing neuropathic pain. Muscle Nerve 58: 434-440, 2018.
Asunto(s)
Inhibidores de Histona Desacetilasas/uso terapéutico , Ácidos Hidroxámicos/uso terapéutico , Neuralgia/tratamiento farmacológico , Neuralgia/enzimología , Dimensión del Dolor/efectos de los fármacos , Animales , Plexo Braquial/efectos de los fármacos , Plexo Braquial/enzimología , Plexo Braquial/patología , Relación Dosis-Respuesta a Droga , Inhibidores de Histona Desacetilasas/farmacología , Histona Desacetilasas/metabolismo , Ácidos Hidroxámicos/farmacología , Masculino , Neuralgia/patología , Dimensión del Dolor/métodos , Ratas , Ratas Sprague-DawleyRESUMEN
Developing synthetic methodology to crystallize extended covalent structures has been an important pursuit of reticular chemistry. Here, we report a homogeneous synthetic route for imine covalent organic frameworks (COFs) where crystallites emerge from clear solutions without forming amorphous polyimine precipitates. The key feature of this route is the utilization of tert-butyloxycarbonyl group protected amine building blocks, which are deprotected in situ and gradually nucleate the crystalline framework. We demonstrate the utility of this approach by crystallizing a woven covalent organic framework (COF-112), in which covalent organic threads are interlaced to form a three-dimensional woven framework. The homogeneous imine COF synthesis also enabled the control of nucleation and crystal growth leading to uniform nanocrystals, through microwave-assisted reactions, and facile preparation of oriented thin films.
RESUMEN
Linking molecular building units by covalent bonds to make crystalline extended structures has given rise to metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), thus bringing the precision and versatility of covalent chemistry beyond discrete molecules to extended structures. The key advance in this regard has been the development of strategies to overcome the "crystallization problem", which is usually encountered when attempting to link molecular building units into covalent solids. Currently, numerous MOFs and COFs are made as crystalline materials in which the large size of the constituent units provides for open frameworks. The molecular units thus reticulated become part of a new environment where they have (a) lower degrees of freedom because they are fixed into position within the framework; (b) well-defined spatial arrangements where their properties are influenced by the intricacies of the pores; and (c) ordered patterns onto which functional groups can be covalently attached to produce chemical complexity. The notion of covalent chemistry beyond molecules is further strengthened by the fact that covalent reactions can be carried out on such frameworks, with full retention of their crystallinity and porosity. MOFs are exemplars of how this chemistry has led to porosity with designed metrics and functionality, chemically-rich sequences of information within their frameworks, and well-defined mesoscopic constructs in which nanoMOFs enclose inorganic nanocrystals and give them new levels of spatial definition, stability, and functionality.
RESUMEN
While glassy materials can be made from virtually every class of liquid (metallic, molecular, covalent, and ionic), to date, formation of glasses in which structural units impart porosity on the nanoscopic level remains undeveloped. In view of the well-established porosity of metal-organic frameworks (MOFs) and the flexibility of their design, we have sought to combine their formation principles with the general versatility of glassy materials. Although the preparation of glassy MOFs can be achieved by amorphization of crystalline frameworks, transparent glassy MOFs exhibiting permanent porosity accessible to gases are yet to be reported. Here, we present a generalizable chemical strategy for making such MOF glasses by assembly from viscous solutions of metal node and organic strut and subsequent evaporation of a plasticizer-modulator solvent. This process yields glasses with 300 m(2)/g internal surface area (obtained from N2 adsorption isotherms) and a 2 nm pore-pore separation. On a volumetric basis, this porosity (0.33 cm(3)/cm(3)) is 3 times that of the early MOFs (0.11 cm(3)/cm(3) for MOF-2) and within range of the most porous MOFs known (0.60 cm(3)/cm(3) for MOF-5). We believe the porosity originates from a 3D covalent network as evidenced by the disappearance of the glass transition signature as the solvent is removed and the highly cross-linked nanostructure builds up. Our work represents an important step forward in translating the versatility and porosity of MOFs to glassy materials.
RESUMEN
We enclose octahedral silver nanocrystals (Ag NCs) in metal-organic frameworks (MOFs) to make mesoscopic constructs O(h)-nano-AgâMOF in which the interface between the Ag and the MOF is pristine and the MOF is ordered (crystalline) and oriented on the Ag NCs. This is achieved by atomic layer deposition of aluminum oxide on Ag NCs and addition of a tetra-topic porphyrin-based linker, 4,4',4â³,4â´-(porphyrin-5,10,15,20-tetrayl)tetrabenzoic acid (H4TCPP), to react with alumina and make MOF [Al2(OH)2TCPP] enclosures around Ag NCs. Alumina thickness is precisely controlled from 0.1 to 3 nm, thus allowing control of the MOF thickness from 10 to 50 nm. Electron microscopy and grazing angle X-ray diffraction confirm the order and orientation of the MOF by virtue of the porphyrin units being perpendicular to the planes of the Ag. We use surface-enhanced Raman spectroscopy to directly track the metalation process on the porphyrin and map the distribution of the metalated and unmetalated linkers on a single-nanoparticle level.
RESUMEN
A key challenge in the field of electrochemical carbon dioxide reduction is the design of catalytic materials featuring high product selectivity, stability, and a composition of earth-abundant elements. In this work, we introduce thin films of nanosized metal-organic frameworks (MOFs) as atomically defined and nanoscopic materials that function as catalysts for the efficient and selective reduction of carbon dioxide to carbon monoxide in aqueous electrolytes. Detailed examination of a cobalt-porphyrin MOF, Al2(OH)2TCPP-Co (TCPP-H2 = 4,4',4â³,4â´-(porphyrin-5,10,15,20-tetrayl)tetrabenzoate) revealed a selectivity for CO production in excess of 76% and stability over 7 h with a per-site turnover number (TON) of 1400. In situ spectroelectrochemical measurements provided insights into the cobalt oxidation state during the course of reaction and showed that the majority of catalytic centers in this MOF are redox-accessible where Co(II) is reduced to Co(I) during catalysis.
RESUMEN
Metal-organic network-forming glasses are an emerging type of material capable of combining the modular design and high porosity of metal-organic frameworks and the high processability and optical transparency of glasses. However, a generalizable strategy for achieving both high porosity and high glass-forming ability in modularly designed metal-organic networks has yet to be developed. Herein, we develop a series of aluminum alkoxide glasses and monoliths by linking aluminum-oxo clusters with alcohol linkers. A bulky monodentate alcohol modulator is introduced during synthesis and act as both network plasticizer and pore template, which can be removed by the subsequent solvent exchange to give gas accessible pores. Glasses synthesized with the modulator template exhibit well-defined glass transitions in their as-synthesized form and high surface areas up to 500 m2/g after activation, making them among the most porous glassy materials. The aluminum alkoxide glasses also have optical transparency and fluorescent properties, and their structures are elucidated by pair-distribution functions, spectroscopic and compositional analysis. These findings could significantly expand the library of microporous metal-organic network-forming glasses and enable their future applications.