Molecular recognition between volatile molecules and odorant binding proteins 7 by homology modeling, molecular docking and molecular dynamics simulation.

BACKGROUND: Odorant-binding proteins (OBPs) in insects are key to detection and recognition of external chemical signals associated with survival. OBP7 in Spodoptera frugiperda's larval stage (SfruOBP7) may search for host plants by sensing plant volatiles, which are important sources of pest attractants and repellents. However, the atomic-level basis of binding modes remains elusive. RESULTS: SfruOBP7 structure was constructed through homology modeling, and complex models of six plant volatiles ((E)-2-hexenol, α-pinene, (Z)-3-hexenyl acetate, lauric acid, O-cymene and 1-octanol) and SfruOBP7 were obtained through molecular docking. To study the detailed interactions between the six plant volatile molecules and SfruOBP7, we conducted three 300 ns molecular dynamics simulations for each study object. The correlation coefficients between binding free energy obtained by molecular mechanics/generalized Born surface area together with solvated interaction energy methods and experimental values are 0.90 and 0.88, respectively, showing a good correlation. By comparing binding free energy along with interaction patterns between SfruOBP7 and the six volatile molecules, hotspot residues of SfruOBP7 when binding with different volatile molecules were determined. Hydrophobic interactions stemming from van der Waals interactions play a significant role in SfruOBP7 and these plant volatile systems. CONCLUSION: The optimized three-dimensional structure of SfruOBP7 and its binding modes with six plant volatiles revealed their interactions, thus providing a means for estimating the binding energies of other plant volatiles. Our study will help to guide the rational design of effective and selective insect attractants. © 2024 Society of Chemical Industry.

Chemical Variation and Environmental Influence on Essential Oil of Cinnamomum camphora.

Cinnamomum camphora is a traditional aromatic plant used to produce linalool and borneol flavors in southern China; however, its leaves also contain many other unutilized essential oils. Herein, we report geographic relationships for the yield and compositional diversity of C. camphora essential oils. The essential oils of 974 individual trees from 35 populations in 13 provinces were extracted by hydrodistillation and analyzed qualitatively and quantitatively by gas chromatography-mass spectrometry and gas chromatography-flame ionization detection, respectively. Oil yields ranged from 0.01% to 3.46%, with a significantly positive correlation with latitude and a significantly negative correlation with longitude. In total, 41 compounds were identified, including 15 monoterpenoids, 24 sesquiterpenoids, and two phenylpropanoids. Essential oil compositions varied significantly among individuals and could be categorized into various chemotypes. The six main chemotypes were eucalyptol, nerolidol, camphor, linalool, selina, and mixed types. The other 17 individual plants were chemotypically rare and exhibited high levels of methyl isoeugenol, methyl eugenol, δ-selinene, or borneol. Eucalyptol-type plants had the highest average oil yield of 1.64%, followed in decreasing order by linalool-, camphor-, mixed-, selina-, and nerolidol-type plants. In addition, the five main compounds exhibited a clear geographic gradient. Eucalyptol and linalool showed a significantly positive correlation with latitude, while selina-6-en-4-ol was significantly and negatively correlated with latitude. trans-Nerolidol and selina-6-en-4-ol showed significantly positive correlations with longitude, whereas camphor was significantly and negatively correlated with longitude. Canonical correspondence analysis indicated that environmental factors could strong effect the oil yield and essential oil profile of C. camphora.

Integrated SMRT and Illumina Sequencing Provide New Insights into Crocin Biosynthesis of Gardenia jasminoides.

Crocins are valuable bioactive components of gardenia fruit, and their biosynthesis and accumulation have attracted widespread interest. Studies have investigated the biosynthesis and accumulation of crocin based on Illumina sequencing, but there is a lack of reports based on full-length transcriptome sequencing. Utilising SMRT sequencing and high-performance liquid chromatography (HPLC), we explored crocin biosynthesis and accumulation in the fruit of Gardenia jasminoides. HPLC analysis showed that crocins specifically exist in fruit and that the content of crocins increases gradually during fruit development. SMRT sequencing generated 46,715 high-quality full-length isoforms, including 5230 novel isoforms that are not present in the G. jasminoides genome. Furthermore, a total of 46 genes and 91 lncRNAs were involved in the biosynthesis and accumulation of crocin. The qRT-PCR indicated that genes involved in crocin biosynthesis reached a peak in the NOV stage. These findings contributed to our understanding of crocin biosynthesis and accumulation.

Full-Length Transcriptome Sequencing and Different Chemotype Expression Profile Analysis of Genes Related to Monoterpenoid Biosynthesis in Cinnamomum porrectum.

Leaves of C. porrectum are rich in essential oils containing monoterpenes, sesquiterpenes and aromatic compounds, but the molecular mechanism of terpenoid biosynthesis in C. porrectum is still unclear. In this paper, the differences in the contents and compositions of terpenoids among three chemotypes were analyzed using gas chromatography mass spectrometry (GC/MS). Furthermore, the differential expression of gene transcripts in the leaf tissues of the three C. porrectum chemotypes were analyzed through a comparison of full-length transcriptomes and expression profiles. The essential oil of the three C. porrectum chemotypes leaves was mainly composed of monoterpenes. In the full-length transcriptome of C. porrectum, 104,062 transcripts with 306,337,921 total bp, an average length of 2944 bp, and an N50 length of 5449 bp, were obtained and 94025 transcripts were annotated. In the eucalyptol and linalool chemotype, the camphor and eucalyptol chemotype, and the camphor and linalool chemotype comparison groups, 21, 22 and 18 terpene synthase (TPS) unigenes were identified respectively. Three monoterpene synthase genes, CpTPS3, CpTPS5 and CpTPS9, were upregulated in the eucalyptol chemotype compared to the linalool chemotype and camphor chemotype. CpTPS1 was upregulated in the camphor chemotype compared to the linalool chemotype and the eucalyptol chemotype. CpTPS4 was upregulated in the linalool chemotype compared to the camphor chemotype and the eucalyptol chemotype. Different unigenes had different expression levels among the three chemotypes, but the unigene expression levels of the 2-C-methyl-D-erythritol 4phosphate (MEP) pathway were generally higher than those of the mevalonate acid (MVA) pathway. Quantitative reverse transcription PCR(qRT-PCR) further validated these expression levels. The present study provides new clues for the functional exploration of the terpenoid synthesis mechanism and key genes in different chemotypes of C. porrectum.

Transcriptome analysis and identification of genes related to terpenoid biosynthesis in Cinnamomum camphora.

BACKGROUND: Cinnamomum camphora has been cultivated as an economically important tree for its medicinal and aromatic properties. Selective breeding has produced Cinnamomum plants for special uses, including spice strains with characteristic flavors and aromas and high-potency medicinal cultivars. The molecular biology underlying terpenoid biosynthesis is still unexplored. RESULTS: Gas chromatography-mass spectrometry was used to analyze the differences in contents and compositions of essential oil terpenoids in linalool- and borneol-type chemotypes of C. camphora. The data revealed that the essential oils consist primarily of monoterpenes with only very minor quantities of sesquiterpenes and diterpenes and that the essential oil differs in different chemotypes of C. camphora, with higher yields of (-)-borneol from the borneol-type than from the linalool-type. To study the terpenoid biosynthesis of signature compounds of the major monoterpenes, we performed RNA sequencing to profile the leaf transcriptomes of the two chemotypes of C. camphora. A total of 23.76 Gb clean data was generated from two chemotypes and assembled into 156,184 unigenes. The total length, average length, N50 and GC content of unigenes were 155,645,929 bp, 997 bp, 1430 bp, and 46.5%, respectively. Among them, 76,421 unigenes were annotated by publicly available databases, of which 67 candidate unigenes were identified to be involved in terpenoid biosynthesis in C. camphora. A total of 2863 unigenes were identified to be differentially expression between borneol-type and linalool-type, including 1714 up-regulated and 1149 down-regulated unigenes. Most genes encoding proteins involved in terpenoid precursor MVA and MEP pathways were expressed in similar levels in both chemotypes of C. camphora. In addition, 10 and 17 DEGs were significantly enriched in the terpene synthase activity and oxidoreductase activity terms of their directed acyclic graphs (DAG), respectively. Three monoterpene synthase genes, TPS14-like1, TPS14-like2 and TPS14-like3 were up-regulated in the borneol-type compared to the linalool-type, and their expression levels were further verified using quantitative real-time PCR. CONCLUSIONS: This study provides a global overview of gene expression patterns related to terpenoid biosynthesis in C. camphora, and could contribute to a better understanding of the differential accumulation of terpenoids in different C. camphora chemotypes.

Genome-wide analysis of CrRLK1L gene family in Gossypium and identification of candidate CrRLK1L genes related to fiber development.

Members of the CrRLK1L family, a subgroup of the receptor-like kinase (RLK) gene family, are thought to act as sensors for the integrity of the cell wall and regulators of polar elongation. To better understand the various functions in fiber development, we conducted genome-wide identification and characterization analyses of CrRLK1L family in cotton. Here 44, 40, and 79 CrRLK1L genes were identified from three cotton species: diploid G. raimondii (D5), diploid G. arboreum (A2), and tetraploid G. hirsutum TM-1 (AD1), respectively. The 44 CrRLK1Ls in G. raimondii were anchored to the 12 chromosomes unevenly and were classified into six groups (I-VI), with group II and group IV being further divided into two subgroups (groups IIa and IIb, and IVa and IVb, respectively). These CrRLK1Ls displayed a highly regular pattern of developmental and spatial regulation in cotton. Using the transcriptome data of five chromosomal segment introgression lines (CSILs) and the physical integration of CrRLK1Ls with the quantitative trait loci (QTLs) related to fiber quality traits, we revealed that six CrRLK1L genes were highly associated with fiber development. This study brings new insights into the integrated genome-wide identification of CrRLK1Ls in cotton and provides references for the genetic improvement of cotton fiber.

Oxidation effects on Microcystis aeruginosa inactivation through various reactive oxygen species: Degradation efficiency, mechanisms, and physiological properties.

The study investigated the inactivation of Microcystis aeruginosa using a combined approach involving thermally activated peroxyacetic acid (Heat/PAA) and thermally activated persulfate (Heat/PDS). The Heat/PDS algal inactivation process conforms to first-order reaction kinetics. Both hydroxyl radical (•OH) and sulfate radical (SO4-•) significantly impact the disruption of cell integrity, with SO4-• assuming a predominant role. PAA appears to activate organic radicals (RO•), hydroxyl (•OH), and a minimal amount of singlet oxygen (1O2). A thorough analysis underscores persulfate's superior ability to disrupt algal cell membranes. Additionally, SO4-• can convert small-molecule proteins into aromatic hydrocarbons, accelerating cell lysis. PAA can accelerate cell death by diffusing into the cell membrane and triggering advanced oxidative reactions within the cell. This study validates the effectiveness of the thermally activated persulfate process and the thermally activated peroxyacetic acid as strategies for algae inactivation.

Effects of organic trace minerals chelated with oligosaccharides on growth performance, blood parameters, slaughter performance and meat quality in sheep.

The present study assessed the effects of oligosaccharide-chelated organic trace minerals (OTM) on the growth performance, digestive enzyme activity, blood parameters, slaughter performance, and meat quality indexes of mutton sheep. A total of 60 East Ujumuqin × small-tailed Han crossbred mutton sheep were assigned to two groups (10 duplicates per group) by body weight (26.12 ± 3.22 kg) according to a completely randomized design. Compared to the CON group, the results of the OTM group showed: (1) no significant changes in the initial body weight, final body weight, dry matter intake, average daily gain, and feed conversion ratio (p > 0.05); (2) the activities of trypsin, lipase, and amylase in the jejunum were significantly increased (p < 0.05); (3) serum total protein, albumin, and globulin of the blood were significantly increased (p < 0.05), and the growth factor interleukin IL-10 was significantly higher (p < 0.05), while IL-2, IL-6, and γ-interferon were significantly lower (p < 0.05). Immunoglobulins A, M, and G were significantly higher (p < 0.05); (4) the live weight before slaughter, carcass weights, dressing percentage, eye muscle areas, and GR values did not differ significantly (p > 0.05); (5) shear force of mutton was significantly lower (p < 0.05), while the pH45min, pH24h, drip loss, and cooking loss did not show a significant difference (p > 0.05). The content of crude protein was significantly higher (p < 0.05), while the ether extract content was significantly reduced (p < 0.05), but no significant difference was detected between moisture and ash content; (6) the total amino acids, essential amino acids, semi-essential amino acids, and umami amino acids were significantly increased (p < 0.05). Although umami amino acids were not significant, the total volume increased (p > 0.05). Among these, the essential amino acids, threonine, valine, leucine, lysine in essential amino acids and arginine were significantly increased (p < 0.05). Also, non-essential amino acids, glycine, serine, proline, tyrosine, cysteine, and aspartic acid, were significantly higher (p < 0.05). The content of alanine, aspartate, glutamic acid, phenylalanine, and tyrosine in umami amino acids was significantly higher (p < 0.05).

Effects of nanoselenium on the performance, blood indices, and milk metabolites of dairy cows during the peak lactation period.

To compare the impact of nanoselenium and sodium selenite on the performance, blood indices, and milk metabolites of dairy cows during the peak lactation period, two groups of dairy cows under the same conditions were selected as the control group (CON group) and treatment group (NSe group) for a 38-day (10 days for adaptation and 28 days for sampling) experiment. The control group (CON) was provided a basal diet +3.3 g/d of sodium selenite (purity1%), whereas the nanoselenium group (NSe) was offered the same diet +10 mL/d of nanoselenium (selenium concentration 1,500 mg/L). The results showed that NSe significantly increased the milk yield, milk selenium content, and feed efficiency (p < 0.05), but had no significant effect on other milk components (p > 0.05). NSe significantly increased blood urea nitrogen (BUN) and alkaline phosphatase (ALP) (p < 0.05), but had no significant effects on malondialdehyde (MDA), superoxide dismutase (SOD), glutathione peroxidase (GSH-Px), blood total antioxidant capacity (T-AOC), or blood selenium (p > 0.05). In addition, the nontargeted metabolomics of the milk was determined by LC-MS technology, and the differentially abundant metabolites and their enrichment pathways were screened. According to these findings, NSe considerably increased the contents of cetylmannoside, undecylenoic acid, 3-hydroxypentadecanoic acid, 16-hydroxypentadecanoic acid, threonic acid, etc., but decreased the contents of galactaric acid, mesaconic acid, CDP-glucose etc. Furthermore, the enriched metabolic pathways that were screened with an impact value greater than 0.1 included metabolism of niacin and niacinamide, pyruvate, citrate cycle, riboflavin, glycerophospholipid, butanoate and tyrosine. Pearson correlation analysis also revealed a relationship between different milk metabolites and blood selenium, as well as between milk selenium and blood biochemical indices. In conclusion, compared with sodium selenite, nanoselenium improves the milk yield, feed efficiency, and milk selenium content of dairy cows and regulates milk metabolites and related metabolic pathways in Holstein dairy cows during the peak lactation period, which has certain application prospects in dairy production.

Effects of Lactobacillus plantarum (L) and molasses (M) on nutrient composition, aerobic stability, and microflora of alfalfa silage in sandy grasslands.

The objective of this experiment was to investigate the effects of Lactobacillus plantarum and molasses on the nutrient composition, fermentation quality, bacterial count, aerobic stability, and microflora of alfalfa silage in sandy grasslands. The experimental treatments included control (CK), 106 CFU/g Lactobacillus plantarum (L), 5% molasses (M), and 106 CFU/g Lactobacillus plantarum + 5% molasses (LM). The nutrient composition, fermentation quality, bacterial count, aerobic stability, and microflora were determined after 14 days and 56 days of ensiling, respectively. The results showed that the addition of L, M, and LM reduced dry matter loss (DM), neutral detergent fiber (NDF), and acid detergent fiber (ADF) content, and increased water-soluble carbohydrates (WSC) and ether extract (EE) content, compared to the CK group. Meanwhile, more lactic acid (LA) and accelerated fermentation were observed, causing the pH value to drop below 4.5 in the L, M, and LM groups after 56 days of ensiling. The addition of L, M, and LM promoted lactic acid bacteria (LAB), and inhibited yeast. The addition of L significantly increased the content of acetic acid (AA). In terms of microflora, the addition of L, M, and LM made Firmicutes become the dominant bacterial phylum earlier, while Lactobacillus, Weissella, and Pediococcus had a higher abundance. According to the result of Pearson's correlation, there is a very significant negative correlation between pH value and Lactobacillus (P < 0.01) and a very significant positive correlation between pH value and Lactococcus, Enterobacter, Enterococcus, and Leuconostoc (P < 0.01), which may be inhibited by Lactobacillus under the decreased pH value. The results of the prediction of microbial genes indicated that the addition of M could enhance the carbohydrate metabolism and membrane transport metabolism, which may contribute to LA production by LAB metabolism. In general, L, M and LM all improved the fermentation quality and reduced the loss of nutrients to varying degrees, but considering the fermentation quality, the overall effects of M and LM were better than L. M and LM are recommended to be used as silage additives in the process of alfalfa silage in sandy grasslands to improve the quality.

Study on the efficiency and recyclability of Fenton-MnFe2O4 for the degumming of hemp fibers.

Traditional alkali degumming (TAL) has been widely used for hemp degumming; however, the produced degumming waste liquid pollutes the environment. For this phenomenon, an improved Fenton oxidation degumming process was developed in this study, that is, MnFe2O4 (Fenton-MnFe2O4) was added to the Fenton system. The purpose was to reduce the reaction time and the addition of chemical reagents, and reuse the added MnFe2O4. The effects of the Fenton-MnFe2O4 system on fiber properties (such as residual gum rate, and breaking strength) and the recyclability of MnFe2O4 were studied. The results indicated that the hemp fiber could be separated by Fenton-MnFe2O4 treatment (5.30% H2O2 (w/w), 0.310% FeSO4·7H2O (w/w), 0.040% MnFe2O4 (w/w), 40.0 °C, 40.0 min). The breaking strength of the refined fiber was 18.22 cN per dtex, and the residual gum rate was 5.47%. Compared with the TAL system, the time was shorter, energy consumption was less and pollution was smaller. In addition, the fiber treated with MnFe2O4 after five cycles still showed excellent properties, namely, 15.76 cN per dtex breaking strength and 7.79% residual gum rate, which met the needs of the spinning process. Therefore, Fenton-MnFe2O4 show great development potential in hemp fiber degumming.

The critical role of biochar to mitigate the adverse impacts of drought and salinity stress in plants.

Drought stress (DS) is a potential abiotic stress that is substantially reducing crop productivity across the globe. Likewise, salinity stress (SS) is another serious abiotic stress that is also a major threat to global crop productivity. The rapid climate change increased the intensity of both stresses which pose a serious threat to global food security; therefore, it is urgently needed to tackle both stresses to ensure better crop production. Globally, different measures are being used to improve crop productivity under stress conditions. Among these measures, biochar (BC) has been widely used to improve soil health and promote crop yield under stress conditions. The application of BC improves soil organic matter, soil structure, soil aggregate stability, water and nutrient holding capacity, and the activity of both beneficial microbes and fungi, which leads to an appreciable increase in tolerance to both damaging and abiotic stresses. BC biochar protects membrane stability, improves water uptake, maintains nutrient homeostasis, and reduces reactive oxygen species production (ROS) through enhanced antioxidant activities, thereby substantially improving tolerance to both stresses. Moreover, BC-mediated improvements in soil properties also substantially improve photosynthetic activity, chlorophyll synthesis, gene expression, the activity of stress-responsive proteins, and maintain the osmolytes and hormonal balance, which in turn improve tolerance against osmotic and ionic stresses. In conclusion, BC could be a promising amendment to bring tolerance against both drought and salinity stresses. Therefore, in the present review, we have discussed various mechanisms through which BC improves drought and salt tolerance. This review will help readers to learn more about the role of biochar in causing drought and salinity stress in plants, and it will also provide new suggestions on how this current knowledge about biochar can be used to develop drought and salinity tolerance.

[Effects of electroacupuncture on NLRP3/Caspase-1/GSDMD axis and neurological function in rats with cerebral ischemic reperfusion].

OBJECTIVE: To investigate the neuroprotective effect of electroacupuncture (EA) at "Quchi" (LI 11) and "Zusanli" (ST 36) in the rats with cerebral ischemic reperfusion and the potential mechanism of microglia pyroptosis. METHODS: Sixty SD rats were randomly divided into a sham-operation group, a model group and an EA group, with 20 rats in each group. The Zea Longa method was employed to establish the rat model of the middle cerebral artery occlusion and reperfusion (MACO/R) in the left brain. In the EA group, since the 2nd day of modeling, EA was given at "Quchi" (LI 11) and "Zusanli" (ST 36) of right side with disperse-dense wave, 4 Hz/20 Hz in frequency and 0.2 mA in current intensity, 30 min each time, once a day for lasting 7 consecutive days. The reduction rate of cerebral blood flow was measured with laser Doppler flowmetry during operation. The neurological function of rats was observed using Zea Longa neurobehavioral score. The cerebral infarction volume was detected by TTC staining method. The microglia positive expression in the ischemic side of the cortex was detected with the immunofluorescence method. Under transmission electron microscope, the ultrastructure of cell in the ischemic cortex was observed. The mRNA expression levels of nucleotide-binding oligomerization domain-like receptor protein 3 (NLRP3), apoptosis-associated speck-like protein containing a caspase recruitment domain (ASC), cysteinyl aspartate specific proteinase-1 (Caspase-1) and gasdermin D (GSDMD) in the ischemic cortex were detected using real-time PCR. RESULTS: Compared with the sham-operation group, in the model group, the reduction rate of cerebral blood flow was increased during operation (P<0.001); Zea Longa neurobehavional score and the percentage of cerebral infarction volume were increased (P<0.001), the numbers of M1-type microglia marked by CD68+ and M2-type microglia marked by TMEM119+ were elevated in the ischemic cortex (P<0.001), the mRNA expression of NLRP3, ASC, Caspase-1 and GSDMD was increased (P<0.001, P<0.01); the cytomembrane structure was destroyed, with more cell membrane pores formed in the ischemic cortex. Compared with the model group, after intervention, Zea Longa neurobehavioral score and the percentage of cerebral infarction volume were reduced (P<0.05), the number of M1-type microglia marked by CD68+ was reduced (P<0.05) and the number of M2-type microglia marked by TMEM119+ was increased (P<0.05); and the mRNA expression of NLRP3, ASC, Caspase-1 and GSDMD was decreased (P<0.01, P<0.05) in the EA group. Even though the cytomembrane structure was incomplete, there were less membrane pores presented in the ischemic cortex in the EA group after intervention. CONCLUSION: The intervention with EA attenuates the neurological dysfunction and reduces the volume of cerebral infarction in the rats with cerebral ischemic reperfusion. The underlying mechanism is related to the inhibition of microglia pyroptosis through modulating NLRP3/Caspase-1/GSDMD axis.

Antibiotics degradation by advanced oxidation process (AOPs): Recent advances in ecotoxicity and antibiotic-resistance genes induction of degradation products.

Antibiotic contamination could cause serious risks of ecotoxicity and resistance gene induction. Advanced oxidation processes (AOPs) such as Fenton, photocatalysis, activated persulfate, electrochemistry and other AOPs technologies have been proven effective in the degradation of high-risk, refractory organic pollutants such as antibiotics. However, due to the limited mineralization ability, a large number of degradation intermediates will be produced in the oxidation process. The residual or undiscovered ecological risks of degradation products are potential safety hazards and problems necessitating comprehensive studies. In-depth investigations especially on the full assessments of ecotoxicity and resistance genes induction capability of antibiotic degradation products are important issues in reducing the environmental problems of antibiotics. Therefore, this review presents an overview of the current knowledge on the efficiency of different AOPs systems in reducing antibiotics toxicity and antibiotic resistance.

Synergistic defect and doping engineering building strong bonded S-scheme heterojunction for photocatalysis.

Photocatalytic degradation of pollutants is considered a promising approach for wastewater treatment, but is hampered by low efficiency and limited understanding of degradation pathways. A novel oxygen-doped porous g-C3N4/oxygen vacancies-rich BiOCl (OCN/OVBOC) heterostructure was prepared for photocatalytic degradation of bisphenol A (BPA). The synergistic defect and doping engineering favor the formation of strong bonded interface for S-scheme mechanism. Among them, 0.3 OCN/OVBOC showed the most excellent degradation rate, which was 8 times and 4 times higher than that of pure g-C3N4 and BiOCl, respectively. This excellent performance is mainly attributed to the significantly enhanced charge separation via strong bonded interface and redox capability of the S-scheme heterojunction structure, by tuning the coordination excitation and electron localization of the catalyst via O doping and vacancies. This work provides important insights into the role of synergistic defect and doping engineering in facilitating the formation of strong bonded S-scheme heterojunction and ultimately sheds new light on the design of efficient photocatalysts.

Recent advances in biodegradation of emerging contaminants - microplastics (MPs): Feasibility, mechanism, and future prospects.

Plastics have become an essential part of life. When it enters the environment, it migrates and breaks down to form smaller size fragments, which are called microplastics (MPs). Compared with plastics, MPs are detrimental to the environment and pose a severe threat to human health. Bioremediation is being recognized as the most environmentally friendly and cost-effective degradation technology for MPs, but knowledge about the biodegradation of MPs is limited. This review explores the various sources of MPs and their migration behavior in terrestrial and aquatic environments. Among the existing MPs removal technologies, biodegradation is considered to be the best removal strategy to alleviate MPs pollution. The biodegradation potential of MPs by bacteria, fungi and algae is discussed. Biodegradation mechanisms such as colonization, fragmentation, assimilation, and mineralization are presented. The effects of MPs characteristics, microbial activity, environmental factors and chemical reagents on biodegradation are analyzed. The susceptibility of microorganisms to MPs toxicity might lead to decreased degradation efficiency, which is also elaborated. The prospects and challenges of biodegradation technologies are discussed. Eliminating prospective bottlenecks is necessary to achieve large-scale bioremediation of MPs-polluted environment. This review provides a comprehensive summary of the biodegradability of MPs, which is crucial for the prudent management of plastic waste.

Effects of guanidinoacetic acid on in vitro rumen fermentation and microflora structure and predicted gene function.

The fermentation substrate was supplemented with 0% guanidinoacetic acid (GAA) (control group, CON), 0.2% GAA (GAA02), 0.4% GAA (GAA04), 0.6% GAA (GAA06) and 0.8% GAA (GAA08) for 48 h of in vitro fermentation. Gas production was recorded at 2, 4, 6, 8, 12, 24, 36, and 48 h of fermentation. The gas was collected, and the proportions (%, v/v) of H2, CH4 and CO2 were determined. The rumen fermentation parameters, including pH, ammonia nitrogen (NH3-N), microbial protein (MCP) and volatile fatty acids (VFAs), were also determined. Furthermore, the bacterial community structure was analyzed through 16S rRNA high-throughput sequencing. The gene functions were predicted using PICRUSt1 according to the Kyoto Encyclopedia of Genes and Genomes (KEGG). The results showed that with the increase in GAA supplementation levels, the MCP and the concentration of rumen propionate were significantly increased, while the concentration of isovalerate was significantly decreased (p < 0.05). The results of microbial diversity and composition showed that the Shannon index was significantly decreased by supplementation with GAA at different levels (p < 0.05), but the relative abundance of norank_f_F082 and Papillibacter in the GAA06 group was significantly increased (p < 0.05). Especially in group GAA08, the relative abundances of Bacteroidota, Prevotella and Prevotellaceae_UCG-001 were significantly increased (p < 0.05). The results of gene function prediction showed that the relative abundances of the functions of flagellar assembly, bacterial chemotaxis, plant-pathogen interaction, mismatch repair and nucleotide excision repair were significantly decreased (p < 0.05), but the relative abundances of bile secretion and protein digestion and absorption were significantly increased (p < 0.05). In conclusion, supplementation with 0.8% GAA enhanced in vitro rumen fermentation parameters, increased the relative abundance of Prevotella and Prevotellaceae_UCG-001 in the rumen, and increased the metabolic pathways of bile secretion and protein digestion and absorption.

Progress in Antibacterial Hydrogel Dressing.

Antibacterial hydrogel has excellent antibacterial property and good biocompatibility, water absorption and water retention, swelling, high oxygen permeability, etc.; therefore, it widely applied in biomedicine, intelligent textiles, cosmetics, and other fields, especially for medical dressing. As a wound dressing, the antibacterial hydrogel has the characteristics of absorbing wound liquid, controlling drug release, being non-toxic, being without side effects, and not causing secondary injury to the wound. Its preparation method is simple, and can crosslink via covalent or non-covalent bond, such as γ-radiation croFsslinking, free radical polymerization, graft copolymerization, etc. The raw materials are easy to obtain; usually these include chondroitin sulfate, sodium alginate, polyvinyl alcohol, etc., with different raw materials being used for different antibacterial modes. According to the hydrogel matrix and antibacterial mode, the preparation method, performance, antibacterial mechanism, and classification of antibacterial hydrogels are summarized in this paper, and the future development direction of the antibacterial hydrogel as wound dressing is proposed.

Insights into the Role of Natural Polysaccharide-Based Hydrogel Wound Dressings in Biomedical Applications.

Acute skin damage caused by burns or cuts occurs frequently in people's daily lives. Such wounds are difficult to heal normally and have persistent inflammation. Wound dressings not only improve the speed of wound healing, but also protect and cover the wound well. Hydrogels have the characteristics of good flexibility, high water content, and good biocompatibility, and are widely used in biomedicine and other fields. Common hydrogels are mainly natural hydrogels and synthetic hydrogels. Hydrogels cross-linked using different raw materials and different methods have different performance characteristics. Natural hydrogels prepared using polysaccharides are simple to obtain and have good biocompatibility, but are inferior to synthetic hydrogels in terms of mechanical properties and stability, and a single polysaccharide hydrogel cannot meet the component requirements for wound healing. Therefore, functional composite hydrogels with high mechanical properties, high biocompatibility, and high antibacterial properties are the current research hotspots. In this review, several common polysaccharides for hydrogel synthesis and the synthesis methods of polysaccharide hydrogels are introduced, and functional composite hydrogel dressings from recent years are classified. It is hoped that this can provide useful references for relevant research in this field.

The complete chloroplast genome of the aromatic tree species Cinnamomum tenuipile Kosterm (Lauraceae).

Cinnamomum tenuipile Kosterm is a precious aromatic tree in Lauraceae. To better determine its phylogenetic location with other Cinnamomum species, the chloroplast genome of C. tenuipile was sequenced. The complete chloroplast genome size is 152,761 bp, consisting of a pair of inverted repeats (IRa/b) with a length of 20,074 bp separated by a large single-copy region (LSC) and a small single-copy region (SSC) which are 93,685 and 18,928 bp, respectively. The overall GC content of the cp genome is 39.16%. The maximum-likelihood phylogenetic tree showed that C. tenuipile is more closely related to C. aromaticum, providing new insight into the evolution of Lauraceae.