Centimetre-scale perovskite solar cells with fill factors of more than 86 per cent.

Owing to rapid development in their efficiency1 and stability2, perovskite solar cells are at the forefront of emerging photovoltaic technologies. State-of-the-art cells exhibit voltage losses3-8 approaching the theoretical minimum and near-unity internal quantum efficiency9-13, but conversion efficiencies are limited by the fill factor (<83%, below the Shockley-Queisser limit of approximately 90%). This limitation results from non-ideal charge transport between the perovskite absorber and the cell's electrodes5,8,13-16. Reducing the electrical series resistance of charge transport layers is therefore crucial for improving efficiency. Here we introduce a reverse-doping process to fabricate nitrogen-doped titanium oxide electron transport layers with outstanding charge transport performance. By incorporating this charge transport material into perovskite solar cells, we demonstrate 1-cm2 cells with fill factors of >86%, and an average fill factor of 85.3%. We also report a certified steady-state efficiency of 22.6% for a 1-cm2 cell (23.33% ± 0.58% from a reverse current-voltage scan).

Observation of In-Gap States in a Two-Dimensional CrI2/NbSe2 Heterostructure.

Low-dimensional magnetic structures coupled with superconductors are promising platforms for realizing Majorana zero modes, which have potential applications in topological quantum computing. Here, we report a two-dimensional (2D) magnetic-superconducting heterostructure consisting of single-layer chromium diiodide (CrI2) on a niobium diselenide (NbSe2) superconductor. Single-layer CrI2 nanosheets, which hold antiferromagnetic (AFM) ground states by our first-principles calculations, were epitaxially grown on the layered NbSe2 substrate. Using scanning tunneling microscopy/spectroscopy, we observed robust in-gap states spatially located at the edge of the nanosheets and defect-induced zero-energy peaks inside the CrI2 nanosheets. Magnetic-flux vortices induced by an external field exhibit broken 3-fold rotational symmetry of the pristine NbSe2 superconductor, implying the efficient modulation of the interfacial superconducting states by the epitaxial CrI2 layer. A phenomenological model suggests the existence of chiral edge states in a 2D AFM-superconducting hybrid system with an even Chern number, providing a qualitatively plausible understanding for our experimental observation.

Direct aryl-aryl coupling of pentacene on Au(110).

Selective C-H bond activation of polycyclic aromatic hydrocarbons is challenging due to the relatively high bond dissociation energy and the existence of multiple equivalent C-H sites. Herein, we report a scanning tunneling microscopy study on the covalent coupling of pentacene molecules on Au(110) surfaces. The missing-row reconstruction of Au(110) surfaces strengthens the molecule-substrate interactions. At elevated temperatures (470-520 K), pentacenes undergo direct aryl-aryl coupling via C-H bond activation. Due to the anisotropic feature of the reconstructed Au(110) surface, pentacenes are preferentially oriented parallel or perpendicular, making the linear and T-shaped dimers the predominant products. Based on density functional theory calculations, the aryl C-H bond activation barrier is reduced to 1.42 eV on Au(110)-(1 × 3) reconstructed surfaces, at which the extra row of gold atoms located in the (1 × 3) reconstructed grooves plays a key role.

Effect of interfacial recombination, bulk recombination and carrier mobility on the J-V hysteresis behaviors of perovskite solar cells: a drift-diffusion simulation study.

In organic-inorganic hybrid perovskite solar cells, though the current density-voltage (J-V) hysteresis phenomenon is accepted to be caused by ion migration coupled with charge carrier recombination, there are still rich hysteresis characteristics (various J-V hysteresis loops) remaining to be explained. Here, a systematic drift-diffusion simulation study is conducted to explore the effect of interfacial recombination lifetime (τinterface), bulk charge carrier lifetime (τbulk) and mobility (µ) on J-V hysteresis behaviors. The simulation results show that, for devices with only interfacial recombination, the decrease of τinterface will lead to J-V hysteresis loops with a large gap on the open circuit side. For devices with only bulk recombination, the drop of τbulk will lead to J-V hysteresis loops with a large gap on the short circuit side. Meanwhile, in both cases, the decrease of µ aggravates the effect of interfacial and bulk recombination, while it has no effect on VOC. Our simulations reveal the effect of decreased τinterface, τbulk and µ on the J-V characteristics and explain the hysteresis loops with specific shapes, which have been reported in the literature.

Synthesis and Characterization of Hexapole [7]Helicene, A Circularly Twisted Chiral Nanographene.

We report the synthesis and characterization of two hexapole [7]helicenes (H7Hs). Single crystal X-ray diffraction unambiguously confirms the molecular structure. H7H absorbs light, with distinct Cotton effect, from ultraviolet to the near-infrared (λmax = 618 nm). Cyclic voltammetry reveals nine reversible redox states, consecutively from -2 to +6. These chiroptical and electronic properties of H7H are inaccessible from helicene's small homologues.

Surface-Assisted Alkane Polymerization: Investigation on Structure-Reactivity Relationship.

Surface-assisted polymerization of alkanes is a remarkable reaction for which the surface reconstruction of Au(110) is crucial. The surface of (1×2)-Au(110) precovered with molecules can be completely transformed into (1×3)-Au(110) by introducing branched methylidene groups on both sides of the aliphatic chain (18, 19-dimethylidenehexatriacontane) or locally shifted into (1×3)-Au(110) under exposure to low-energy electrons (beam energy from 3.5 to 33.6 eV, for alkane dotriacontane). Scanning tunneling microscopy investigations demonstrate that alkane chains adsorbed on (1×3)-Au(110) are more reactive than on (1×2)-Au(110), presenting a solid experimental proof for structure-reactivity relationships. This difference can be ascribed to the existence of an extra row of gold atoms in the groove of (1×3)-Au(110), providing active sites of Au atoms with lower coordination number. The experimental results are further confirmed by density functional theory simulations.

Quaterrylene molecules on Ag(111): self-assembly behavior and voltage pulse induced trimer formation.

The self-assembly behavior of quaterrylene (QR) molecules on Ag(111) surfaces has been investigated by scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. It is found that the QR molecules are highly mobile on the Ag(111) surface at 78 K. No ordered assembled structure is formed on the surface with a sub-monolayer coverage up to 0.8 monolayer due to the intermolecular repulsive interactions, whereas ordered molecular structures are observed at one monolayer coverage. According to our DFT calculations, charge transfer occurs between the substrate and the adsorbed QR molecule. As a result, out-of-plane dipoles appear at the interface, which are ascribed to the repulsive dipole-dipole interactions between the QR molecules. Furthermore, due to the planar geometry, the QR molecules exhibit relatively low diffusion barriers on Ag(111). By applying a voltage pulse between the tunneling gap, immobilization and aggregation of QR molecules take place, resulting in the formation of a triangle-shaped trimer. Our work demonstrates the ability of manipulating intermolecular repulsive and attractive interactions at the single molecular level.

On-surface synthesis of rylene-type graphene nanoribbons.

The narrowest armchair graphene nanoribbon (AGNR) with five carbons across the width of the GNR (5-AGNR) was synthesized on Au(111) surfaces via sequential dehalogenation processes in a mild condition by using 1,4,5,8-tetrabromonaphthalene as the molecular precursor. Gold-organic hybrids were observed by using high-resolution scanning tunneling microscopy and considered as intermediate states upon AGNR formation. Scanning tunneling spectroscopy reveals an unexpectedly large band gap of Δ = 2.8 ± 0.1 eV on Au(111) surface which can be interpreted by the hybridization of the surface states and the molecular states of the 5-AGNR.

Linear alkane C-C bond chemistry mediated by metal surfaces.

Linear alkanes undergo different C-C bond chemistry (coupling or dissociation) thermally activated on anisotropic metal surfaces depending on the choice of the substrate material. Owing to the one-dimensional geometrical constraint, selective dehydrogenation and C-C coupling (polymerization) of linear alkanes take place on Au(110) surfaces with missing-row reconstruction. However, the case is dramatically different on Pt(110) surfaces, which exhibit similar reconstruction as Au(110). Instead of dehydrogenative polymerization, alkanes tend to dehydrogenative pyrolysis, resulting in hydrocarbon fragments. Density functional theory calculations reveal that dehydrogenation of alkanes on Au(110) surfaces is an endothermic process, but further C-C coupling between alkyl intermediates is exothermic. On the contrary, due to the much stronger C-Pt bonds, dehydrogenation on Pt(110) surfaces is energetically favorable, resulting in multiple hydrogen loss followed by C-C bond dissociation.

Building chessboard-like supramolecular structures on Au(111) surfaces.

We investigate an anthracene derivative, 3(5)-(9-anthryl) pyrazole (ANP), self-assembled on the Au(111) surface by means of scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. A chessboard-like network structure composed of ANP molecules is found, covering the whole Au(111) substrate. Our STM results and DFT calculations reveal that the formation of chessboard-like networks originates from a basic unit cell, a tetramer structure, which is formed by four ANP molecules connected through C-H…N hydrogen bonds. The hydrogen bonds inside each tetramer and the molecule-substrate interaction are fundamentally important in providing a driving force for formation of the supramolecular networks.

Thymine and adenine tetrads formed on anisotropic metal surfaces.

The interplay of the Au(110) surface and alkyl-substituted DNA bases induces reorganization of the surface with parallel atomic grooves, while the enhanced surface anisotropy constrains the substituent alkyl chains along the grooves. Every four molecules are bound together through H-bonds while further possible H-bonds are prohibited by either the alkyl chains or the groove borders, resulting in separated tetrad structures located in the grooves.

Surface supported gold-organic hybrids: on-surface synthesis and surface directed orientation.

The surface-assisted synthesis of gold-organic hybrids on Au (111) and Au (100) surfaces is repotred by thermally initiated dehalogenation of chloro-substituted perylene-3,4,9,10-tetracarboxylic acid bisimides (PBIs). Structures and surface-directed alignment of the Au-PBI chains are investigated by scanning tunnelling microscopy in ultra high vacuum conditions. Using dichloro-PBI as a model system, the mechanism for the formation of Au-PBI dimer is revealed with scanning tunnelling microscopy studies and density functional theory calculations. A PBI radical generated from the homolytic C-Cl bond dissociation can covalently bind a surface gold atom and partially pull it out of the surface to form stable PBI-Au hybrid species, which also gives rise to the surface-directed alignment of the Au-PBI chains on reconstructed Au (100) surfaces.

Evidence of Ferromagnetism and Ultrafast Dynamics of Demagnetization in an Epitaxial FeCl2 Monolayer.

The development of two-dimensional (2D) magnetism is driven not only by the interest of low-dimensional physics but also by potential applications in high-density miniaturized spintronic devices. However, 2D materials possessing a ferromagnetic order with a relatively high Curie temperature (Tc) are rare. In this paper, the evidence of ferromagnetism in monolayer FeCl2 on Au(111) surfaces, as well as the interlayer antiferromagnetic coupling of bilayer FeCl2, is characterized by using spin-polarized scanning tunneling microscopy. A Curie temperature (Tc) of ∼147 K is revealed for monolayer FeCl2, based on our static magneto-optical Kerr effect measurements. Furthermore, temperature-dependent magnetization dynamics is investigated by the time-resolved magneto-optical Kerr effect. A transition from one- to two-step demagnetization occurs as the lattice temperature approaches Tc, which supports the Elliott-Yafet spin relaxation mechanism. The findings contribute to a deeper understanding of the underlying mechanisms governing ultrafast magnetization in 2D ferromagnetic materials.

Phase-selective in-plane heteroepitaxial growth of H-phase CrSe2.

Phase engineering of two-dimensional transition metal dichalcogenides (2D-TMDs) offers opportunities for exploring unique phase-specific properties and achieving new desired functionalities. Here, we report a phase-selective in-plane heteroepitaxial method to grow semiconducting H-phase CrSe2. The lattice-matched MoSe2 nanoribbons are utilized as the in-plane heteroepitaxial template to seed the growth of H-phase CrSe2 with the formation of MoSe2-CrSe2 heterostructures. Scanning tunneling microscopy and non-contact atomic force microscopy studies reveal the atomically sharp heterostructure interfaces and the characteristic defects of mirror twin boundaries emerging in the H-phase CrSe2 monolayers. The type-I straddling band alignments with band bending at the heterostructure interfaces are directly visualized with atomic precision. The mirror twin boundaries in the H-phase CrSe2 exhibit the Tomonaga-Luttinger liquid behavior in the confined one-dimensional electronic system. Our work provides a promising strategy for phase engineering of 2D TMDs, thereby promoting the property research and device applications of specific phases.

Two-Dimensional Magnetic Semiconducting Heterostructures of Single-Layer CrI3-CrI2.

Single-layer heterostructures of magnetic materials are unique platforms for studying spin-related phenomena in two dimensions (2D) and have promising applications in spintronics and magnonics. Here, we report the fabrication of 2D magnetic lateral heterostructures consisting of single-layer chromium triiodide (CrI3) and chromium diiodide (CrI2). By carefully adjusting the abundance of iodine based on molecular beam epitaxy, single-layer CrI3-CrI2 heterostructures were grown on Au(111) surfaces with nearly atomic-level seamless boundaries. Two distinct types of interfaces, i.e., zigzag and armchair interfaces, have been identified by means of scanning tunneling microscopy. Our scanning tunneling spectroscopy study combined with density functional theory calculations indicates the existence of spin-polarized ground states below and above the Fermi energy localized at the boundary. Both the armchair and zigzag interfaces exhibit semiconducting nanowire behaviors with different spatial distributions of density of states. Our work presents a novel low-dimensional magnetic system for studying spin-related physics with reduced dimensions and designing advanced spintronic devices.

Molecular cloisonné: multicomponent organic alternating nanostructures at vicinal surfaces with tunable length scales.

By careful management of the adsorption preference of organic molecules at faceted vicinal surfaces, organic alternating structures can be extended to multilayers and multicomponent with tunable size scales ranging from several to a few tens nanometers.

Epitaxial growth and electronic properties of an antiferromagnetic semiconducting VI2 monolayer.

The van der Waals materials down to the monolayer (ML) limit provide a fertile platform for exploring low-dimensional magnetism and developing the novel applications of spintronics. Among them, due to the absence of the net magnetic moment, antiferromagnetic (AFM) materials have received much less attention than ferromagnetic ones. Here, by combining scanning tunneling microscopy and state-of-the-art first-principles calculations, we investigate the preparation, and electronic and magnetic properties of a vanadium(II) iodide (VI2) ML. Single-layer VI2 has been grown by molecular beam epitaxy on Au(111) surfaces. A band gap of 2.8 eV is revealed, indicating the semiconducting nature of the VI2 ML. Vanadium and iodine vacancy defects give rise to additional feature states within the bandgap. A typical 120° AFM spin ordering is maintained in the ML limit of VI2, as revealed by the first-principles calculations. Besides, the AFM coupling is greatly enhanced by slightly decreasing lattice constants. Our work provides an ideal platform for further studying two-dimensional magnetism with non-collinear AFM ordering and for investigating the possibility of realizing the spin Hall effect in the ML limit.

Imaging Vacancy Defects in Single-Layer Chromium Triiodide.

As a van der Waals magnetic semiconductor, chromium triiodide (CrI3) is widely considered for its high research value and potential applications. Defects in CrI3 are inevitably present and significantly alter the material properties. However, experimental identification of defects of CrI3 at the atomic level is still lacking. Here for the first time, we carried out a scanning tunneling microscopy (STM) study and density functional theory calculations to explore the intrinsic defects in monolayer CrI3 grown by molecular beam epitaxy. The three most common types of intrinsic point defects, i.e., I vacancy (VI), Cr vacancy (VCr), and multiatom CrI3 vacancy (VCrI3) with distinct spatial distributions of the localized defect states, are identified and characterized by high-resolution STM. Moreover, defect concentrations are estimated based on our experiments, which agree with the calculated formation energies. Our findings provide vital knowledge on the types, concentrations, electronic structures, and migration mechanism of the intrinsic point defects in monolayer CrI3 for future defect engineering of this novel 2D magnet.

Diverse Structures and Magnetic Properties in Nonlayered Monolayer Chromium Selenide.

Thickness-dependent magnetic behavior has previously been observed in chemical vapor deposition-grown chromium selenide. However, the low-dimensional structure in nonlayered chromium selenide, which plays a crucial role in determining the low-dimensional magnetic order, needs further study. Here, we report the structure-dependent magnetic properties in monolayer CrSe2 and Cr2Se3 grown by molecular beam epitaxy. In the monolayer CrSe2, 1T-CrSe2 with a lattice constant of 3.3 Å has a metallic character, coexisting with the 1T″ phase with 2 × 2 surface periodicity. Monolayer CrSe2 can be transformed into Cr2Se3 with a lattice constant of 3.6 Å by annealing at 300 °C. X-ray magnetic circular dichroism (XMCD) measurements combined with DFT calculations reveal that while the MBE-grown monolayer CrSe2 is antiferromagnetic, monolayer Cr2Se3 is ferromagnetic with a Curie temperature of ∼200 K. This work demonstrates the structural diversity in nonlayered chromium selenide and the critical effect of different structures on its electronic and magnetic properties.

Surface-mounted molecular rotors with variable functional groups and rotation radii.

A strategy for designing and activating surface-mounted molecular rotors with variable rotation radii and functional groups is proposed and demonstrated. The key point of the strategy is to separate the anchor and the rotating functional group from each other by using a connector of adjustable length. The three independent parts of the molecule are responsible for different functions to support the rotating movement of the molecule as a whole. In this way, one can easily change each part to obtain molecular rotors with different sizes, anchors, and functional rotating groups.