Two-Dimensional Ultrathin Silica Films.

Two-dimensional (2D) ultrathin silica films have the potential to reach technological importance in electronics and catalysis. Several well-defined 2D-silica structures have been synthesized so far. The silica bilayer represents a 2D material with SiO2 stoichiometry. It consists of precisely two layers of tetrahedral [SiO4] building blocks, corner connected via oxygen bridges, thus forming a self-saturated silicon dioxide sheet with a thickness of ∼0.5 nm. Inspired by recent successful preparations and characterizations of these 2D-silica model systems, scientists now can forge novel concepts for realistic systems, particularly by atomic-scale studies with the most powerful and advanced surface science techniques and density functional theory calculations. This Review provides a solid introduction to these recent developments, breakthroughs, and implications on ultrathin 2D-silica films, including their atomic/electronic structures, chemical modifications, atom/molecule adsorptions, and catalytic reactivity properties, which can help to stimulate further investigations and understandings of these fundamentally important 2D materials.

Interaction of Hydrogen with Ceria: Hydroxylation, Reduction, and Hydride Formation on the Surface and in the Bulk.

The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO2 ) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO2 (111) thin films and CeO2 powders, and theoretical calculations of CeO2 (111) surfaces with oxygen vacancies (Ov ) at the surface and in the bulk. We show that, on a stoichiometric CeO2 (111) surface, H2 dissociates and forms surface hydroxyls (OH). On the pre-reduced CeO2-x samples, both films and powders, hydroxyls and hydrides (Ce-H) are formed on the surface as well as in the bulk, accompanied by the Ce3+ ↔ Ce4+ redox reaction. As the Ov concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At higher temperatures, surface hydroxyls can react to produce water and create additional oxygen vacancies, increasing its concentration, which controls the H2 /CeO2 interaction. The results demonstrate a large diversity of reaction pathways, which have to be taken into account for better understanding of reactivity of ceria-based catalysts in a hydrogen-rich atmosphere.

Water-Assisted Homolytic Dissociation of Propyne on a Reduced Ceria Surface.

The emergence of ceria (CeO2 ) as an efficient catalyst for the selective hydrogenation of alkynes has attracted great attention. Intensive research effort has been devoted to understanding the underlying catalytic mechanism, in particular the H2 -CeO2 interaction. Herein, we show that the adsorption of propyne (C3 H4 ) on ceria, another key aspect in the hydrogenation of propyne to propene, strongly depends on the degree of reduction of the ceria surface and hydroxylation of the surface, as well as the presence of water. The dissociation of propyne and the formation of methylacetylide (CH3 CC-) have been identified through the combination of infrared reflection absorption spectroscopy (IRAS) and DFT calculations. We demonstrate that propyne undergoes heterolytic dissociation on the reduced ceria surface by forming a methylacetylide ion on the oxygen vacancy site and transferring a proton to the nearby oxygen site (OH group), while a water molecule that competes with the chemisorbed methylacetylide at the vacancy site assists the homolytic dissociation pathway by rebounding the methylacetylide to the nearby oxygen site.

Towards single molecule switches.

The concept of using single molecules as key building blocks for logic gates, diodes and transistors to perform basic functions of digital electronic devices at the molecular scale has been explored over the past decades. However, in addition to mimicking the basic functions of current silicon devices, molecules often possess unique properties that have no parallel in conventional materials and promise new hybrid devices with novel functions that cannot be achieved with equivalent solid-state devices. The most appealing example is the molecular switch. Over the past decade, molecular switches on surfaces have been intensely investigated. A variety of external stimuli such as light, electric field, temperature, tunneling electrons and even chemical stimulus have been used to activate these molecular switches between bistable or even multiple states by manipulating molecular conformations, dipole orientations, spin states, charge states and even chemical bond formation. The switching event can occur either on surfaces or in break junctions. The aim of this review is to highlight recent advances in molecular switches triggered by various external stimuli, as investigated by low-temperature scanning tunneling microscopy (LT-STM) and the break junction technique. We begin by presenting the molecular switches triggered by various external stimuli that do not provide single molecule selectivity, referred to as non-selective switching. Special focus is then given to selective single molecule switching realized using the LT-STM tip on surfaces. Single molecule switches operated by different mechanisms are reviewed and discussed. Finally, molecular switches embedded in self-assembled monolayers (SAMs) and single molecule junctions are addressed.

Reversible Tuning of Interfacial and Intramolecular Charge Transfer in Individual MnPc Molecules.

The reversible selective hydrogenation and dehydrogenation of individual manganese phthalocyanine (MnPc) molecules has been investigated using photoelectron spectroscopy (PES), low-temperature scanning tunneling microscopy (LT-STM), synchrotron-based near edge X-ray absorption fine structure (NEXAFS) measurements, and supported by density functional theory (DFT) calculations. It is shown conclusively that interfacial and intramolecular charge transfer arises during the hydrogenation process. The electronic energetics upon hydrogenation is identified, enabling a greater understanding of interfacial and intramolecular charge transportation in the field of single-molecule electronics.

Single-molecule imaging of activated nitrogen adsorption on individual manganese phthalocyanine.

An atomic-scale understanding of gas adsorption mechanisms on metal-porphyrins or metal-phthalocyanines is essential for their practical application in biological processes, gas sensing, and catalysis. Intensive research efforts have been devoted to the study of coordinative bonding with relatively active small molecules such as CO, NO, NH3, O2, and H2. However, the binding of single nitrogen atoms has never been addressed, which is both of fundamental interest and indeed essential for revealing the elementary chemical binding mechanism in nitrogen reduction processes. Here, we present a simple model system to investigate, at the single-molecule level, the binding of activated nitrogen species on the single Mn atom contained within the manganese phthalocyanine (MnPc) molecule supported on an inert graphite surface. Through the combination of in situ low-temperature scanning tunneling microscopy, scanning tunneling spectroscopy, ultraviolet photoelectron spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations, the active site and the binding configuration between the activated nitrogen species (neutral nitrogen atom) and the Mn center of MnPc are investigated at the atomic scale.

Tuning the Dirac point in CVD-grown graphene through solution processed n-type doping with 2-(2-methoxyphenyl)-1,3-dimethyl-2,3-dihydro-1H-benzoimidazole.

Controlling the Dirac point of graphene is essential for complementary circuits. Here, we describe the use of 2-(2-methoxyphenyl)-1,3-dimethyl-2,3-dihydro-1H-benzoimidazole (o-MeO-DMBI) as a strong n-type dopant for chemical-vapor-deposition (CVD) grown graphene. The Dirac point of graphene can be tuned significantly by spin-coating o-MeO-DMBI solutions on the graphene sheets at different concentrations. The transport of graphene can be changed from p-type to ambipolar and finally n-type. The electron transfer between o-MeO-DMBI and graphene was additionally confirmed by Raman imaging and photoemission spectroscopy (PES) measurements. Finally, we fabricated a complementary inverter via inkjet printing patterning of o-MeO-DMBI solutions on graphene to demonstrate the potential of o-MeO-DMBI n-type doping on graphene for future applications in electrical devices.

Interaction of Gallium with a Copper Surface: Surface Alloying and Formation of Ordered Structures.

Alloys of gallium with transition metals have recently received considerable attention for their applications in microelectronics and catalysis. Here, we investigated the initial stages of the Ga-Cu alloy formation on Cu(111) and Cu(001) surfaces using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and low energy electron diffraction (LEED). The results show that Ga atoms deposited using physical vapor deposition readily intermix with the Cu surface, leading to a random distribution of the Ga and Cu atoms within the surface layer, on both terraces and monolayer-thick islands formed thereon. However, as the Ga coverage increases, several ordered structures are formed. The (√3×√3)R30° structure is found to be thermodynamically most stable on Cu(111). This structure remains after vacuum annealing at 600 K, independent of the initial Ga coverage (varied between 0.5 and 3 monolayers), indicating a self-limited growth of the Ga-Cu alloy layer, with the rest of the Ga atoms migrating into the Cu crystal. For Ga deposited on Cu(001), we observed a (1 × 5)-reconstructed surface, which has never been observed for surface alloys on Cu(001). The experimental findings were rationalized on the basis of density functional theory (DFT) calculations, which provided structural models for the most stable surface Ga-Cu alloys on Cu(111) and Cu(001). The study sheds light on the complex interaction of Ga with transition metal surfaces and the interfaces formed thereon that will aid in a better understanding of surface alloying and chemical reactions on the Ga-based alloys.

The role of gap states in the energy level alignment at the organic-organic heterojunction interfaces.

The interface properties of organic-organic heterojunctions (OOHs), such as interface energy level alignment (ELA), interfacial charge transfer, interface nanostructuring, molecular orientation and so on, play an essential role in determining the device performance for some technologically important organic electronic devices, encompassing organic solar cells, bipolar organic field-effect-transistors, and organic light-emitting-diodes. The aim of this article is to provide a balanced assessment on the understanding of the ELA at the small-molecule based OOH interfaces with well-defined molecular orientation, with particular emphasis on the role of gap states in organic thin films. A generalized picture of gap states determined ELA at the OOH interfaces is provided and their implications in relevant organic electronic devices have been discussed.

Molecular-scale investigation of C60/p-sexiphenyl organic heterojunction interface.

In situ low-temperature scanning tunneling microscopy (LT-STM) and ultraviolet photoelectron spectroscopy (UPS) experiments have been carried out to investigate the interface properties at the C(60)∕p-sexiphenyl (6P) organic-organic heterojunction interface, including the interfacial energy level alignment and the supramolecular packing structures. As revealed by UPS measurements, the vacuum level is almost aligned at the C(60)∕6P interface, suggesting that the interface is dominated by weak intermolecular interactions, such as van der Waals and π-π interactions. In situ LT-STM experiments also indicate the formation of a molecularly sharp C(60)∕6P interface with hexagonally-close-packed C(60) layers nucleated atop 6P layer on graphite.

Structural Evolution of Ga-Cu Model Catalysts for CO2 Hydrogenation Reactions.

We studied the initial stages of Ga interaction with the Cu(001) surface and environment-induced surface transformations in an attempt to elucidate the surface chemistry of the Cu-Ga catalysts recently proposed for CO2 hydrogenation to methanol. The results show that Ga readily intermixes with Cu upon deposition in vacuum. However, even traces of oxygen in the gas ambient cause Ga oxidation and the formation of two-dimensional ("monolayer") Ga oxide islands uniformly covering the Cu surface. The surface morphology and the oxidized state of Ga remain in H2 as well as in a CO2 + H2 reaction mixture at elevated pressures and temperatures (0.2 mbar, 700 K). The results indicate that the Ga-doped Cu surface under reaction conditions exposes a variety of structures including GaO x /Cu interfacial sites, which must be taken into account for elucidating the reaction mechanism.

Operando high-pressure investigation of size-controlled CuZn catalysts for the methanol synthesis reaction.

Although Cu/ZnO-based catalysts have been long used for the hydrogenation of CO2 to methanol, open questions still remain regarding the role and the dynamic nature of the active sites formed at the metal-oxide interface. Here, we apply high-pressure operando spectroscopy methods to well-defined Cu and Cu0.7Zn0.3 nanoparticles supported on ZnO/Al2O3, γ-Al2O3 and SiO2 to correlate their structure, composition and catalytic performance. We obtain similar activity and methanol selectivity for Cu/ZnO/Al2O3 and CuZn/SiO2, but the methanol yield decreases with time on stream for the latter sample. Operando X-ray absorption spectroscopy data reveal the formation of reduced Zn species coexisting with ZnO on CuZn/SiO2. Near-ambient pressure X-ray photoelectron spectroscopy shows Zn surface segregation and the formation of a ZnO-rich shell on CuZn/SiO2. In this work we demonstrate the beneficial effect of Zn, even in diluted form, and highlight the influence of the oxide support and the Cu-Zn interface in the reactivity.

CORM-3 Regulates Microglia Activity, Prevents Neuronal Injury, and Improves Memory Function During Radiation-induced Brain Injury.

OBJECTIVE: This study aims to explore in detail, the mechanism of the carbon monoxide releasing molecule-3 (CORM-3) in regulating the activity of microglia (MG) in the treatment of radiation brain injury (RBI). METHODS: The brain injury models of BV2 cells and Balb/C mice were established and randomly divided into three groups: the normal control group (CON), the single radiation group (RAD), and the radiation plus CORM-3 intervention group (RAD+CORM). Immunofluorescence was used to observe the effects on activation of the MG. The expressions of inflammatory factors, such as intercellular adhesion molecule-1 (ICAM-1) and inducible nitric oxide synthase (iNOS), were detected by Western blot. Neuron apoptosis and regeneration in the radiation brain injury (RBI) model were detected by neuronal nuclear antigen (NeuN)+TUNEL and NeuN+BrdU double staining. A Morris water maze was used to assess the spatial learning and memory of the mice. RESULTS: Within 48 h after radiation, CORM-3 inhibited activation of the MG, blocked the phosphorylation of P38, and increased the expression of ICAM-1 and iNOS. Therefore, CORM-3 might alleviate MG-mediated neuronal apoptosis and promote neural regeneration in the subgranular zone (SGZ) of the dentate gyrus of the hippocampus. CORM-3 could increase the swimming distance and platform-stay time of the mice in the target platform quadrant after radiation. CONCLUSION: CORM-3 could effectively improve the inflammatory response induced by activation of the MG, reduce neuronal apoptosis, promote neural regeneration, and improve the learning and memory performance of mice after radiation.

Isolating the Roles of Hydrogen Exposure and Trace Carbon Contamination on the Formation of Active Catalyst Populations for Carbon Nanotube Growth.

Limited understanding of the factors influencing the yield of carbon nanotubes (CNTs) relative to the number of catalyst particles remains an important barrier to their large-scale production with high quality, and to tailoring CNT properties for applications. This lack of understanding is evident in the frequent use of Edisonian approaches to give high-yield CNT growth, and in the sometimes-confusing influence of trace residues on the reactor walls. In order to create conditions wherein CNT yield is reproducible and to enable large-scale and reliable CNT synthesis, it is imperative to understand-fundamentally-how these common practices impact catalytic activity and thus CNT number density. Herein, we use ambient pressure-X-ray photoelectron spectroscopy (AP-XPS) to reveal the influence of carbon and hydrogen on the coupling between catalyst reduction and CNT nucleation, from an iron catalyst film. We observe a positive correlation between the degree of catalyst reduction and the density of vertically aligned CNTs (forests), verifying that effective catalyst reduction is critical to CNT nucleation and to the resulting CNT growth yield. We demonstrate that the extent of catalyst reduction is the reason for low CNT number density and for lack of self-organization, lift-off, and growth of CNT forests. We also show that hydrocarbon byproducts from consecutive growths can facilitate catalyst reduction and increase CNT number density significantly. These findings suggest that common practices used in the field-such as reactor preconditioning-aid in the reduction of the catalyst population, thus improving CNT number density and enabling the growth of dense forests. Our results also motivate future work using AP-XPS and complementary metrology tools to optimize CNT growth conditions according to the catalyst chemical state.

Probing the effect of the Pt-Ni-Pt(111) bimetallic surface electronic structures on the ammonia decomposition reaction.

We report a detailed investigation of elementary catalytic decomposition of ammonia on the Pt-Ni-Pt(111) bimetallic surface using in situ near ambient pressure X-ray photoelectron spectroscopy. Under the near ambient pressure (0.6 mbar) reaction conditions, a different dehydrogenation pathway with a reduced activation energy barrier for recombinative nitrogen desorption on the Pt-Ni-Pt(111) bimetallic surface is observed. The unique surface catalytic activity is correlated with the downward shift of the Pt 5d band states induced by the Ni subsurface atoms via charge redistribution of the topmost Pt layer. Our results provide a practical understanding of the unique chemistry of bimetallic catalysts for facile ammonia decomposition under realistic reaction conditions.

Immobilization of single argon atoms in nano-cages of two-dimensional zeolite model systems.

The confinement of noble gases on nanostructured surfaces, in contrast to bulk materials, at non-cryogenic temperatures represents a formidable challenge. In this work, individual Ar atoms are trapped at 300 K in nano-cages consisting of (alumino)silicate hexagonal prisms forming a two-dimensional array on a planar surface. The trapping of Ar atoms is detected in situ using synchrotron-based ambient pressure X-ray photoelectron spectroscopy. The atoms remain in the cages upon heating to 400 K. The trapping and release of Ar is studied combining surface science methods and density functional theory calculations. While the frameworks stay intact with the inclusion of Ar atoms, the permeability of gasses (for example, CO) through them is significantly affected, making these structures also interesting candidates for tunable atomic and molecular sieves. These findings enable the study of individually confined noble gas atoms using surface science methods, opening up new opportunities for fundamental research.

Rational design of two-dimensional molecular donor-acceptor nanostructure arrays.

The construction of long-range ordered organic donor-acceptor nanostructure arrays over microscopic areas supported on solid substrates is one of the most challenging tasks towards the realization of molecular nanodevices. They can also be used as ideal model systems to understand light induced charge transfer, charge separation and energy conversion processes and mechanisms at the nanometer scale. The aim of this paper is to highlight recent advances and progress in this topic. Special attention is given to two different strategies for the construction of organic donor-acceptor nanostructure arrays, namely (i) molecular self-assembly on artificially patterned or pre-defined molecular surface nanotemplates and (ii) molecular nanostructure formation steered via directional and selective intermolecular interactions. The interfacial charge transfer and the energy level alignment of these donor-acceptor nanostructures are also discussed.

Energy level realignment in weakly interacting donor-acceptor binary molecular networks.

Understanding the effect of intermolecular and molecule-substrate interactions on molecular electronic states is key to revealing the energy level alignment mechanism at organic-organic heterojunctions or organic-inorganic interfaces. In this paper, we investigate the energy level alignment mechanism in weakly interacting donor-acceptor binary molecular superstructures, comprising copper hexadecafluorophthalocyanine (F16CuPc) intermixed with copper phthalocyanine (CuPc), or manganese phthalocynine (MnPc) on graphite. The molecular electronic structures have been systematically studied by in situ ultraviolet photoelectron spectroscopy (UPS) and low-temperature scanning tunneling microscopy/spectroscopy (LT-STM/STS) experiments and corroborated by density functional theory (DFT) calculations. As demonstrated by the UPS and LT-STM/STS measurements, the observed unusual energy level realignment (i.e., a large downward shift in donor HOMO level and a corresponding small upward shift in acceptor HOMO level) in the CuPc-F16CuPc binary superstructures originates from the balance between intermolecular and molecule-substrate interactions. The enhanced intermolecular interactions through the hydrogen bonding between neighboring CuPc and F16CuPc can stabilize the binary superstructures and modify the local molecular electronic states. The obvious molecular energy level shift was explained by gap-state-mediated interfacial charge transfer.

Correlation between the changes in ambulatory electroencephalography findings and epilepsy recurrence after medication withdrawal among the population in southern China.

Patients suffering from epilepsy need long-term medication. However, after the epilepsy is completely under control, the recurrence rate is high once the drug dose is reduced gradually. The present study investigated the possible correlation between the changes shown by ambulatory electroencephalography (EEG) and epilepsy recurrence after medication withdrawal, and assessed the value of ambulatory EEG findings in predicting the recurrence of epilepsy after medication withdrawal, in 265 patients from Southern China followed up for 5 years. Anticonvulsants were withdrawn until onset had been controlled thoroughly for over 3 years and ambulatory EEG detected no abnormalities. Ambulatory EEG was performed at least once per year, and findings at the first visit, during treatment, and before and after medication withdrawal were compared and analyzed. There were 47 patients with recurrent epilepsy in this study. Patients with normal ambulatory EEG findings at the first visit and during treatment had lower recurrence rate (about 8.1%) compared to patients with epileptic waves (25.0%), and patients with focal epileptic waves in the temporal, occipital, frontal, and parietal lobes, or in multiple areas was even higher. Patients with epileptic waves also showed higher clinical recurrence rate during the follow-up period. Abnormal ambulatory EEG findings are an important indicator of epileptic recurrence, and is of great value in predicting the recurrence of epilepsy after medication withdrawal.

CVD graphene as interfacial layer to engineer the organic donor-acceptor heterojunction interface properties.

We demonstrate the use of chemical-vapor-deposited (CVD) graphene as an effective indium-tin-oxide (ITO) electrode surface modifier to engineer the organic donor-acceptor heterojunction interface properties in an inverted organic solar cell device configuration. As revealed by in situ near-edge X-ray adsorption fine structure measurement, the organic donor-acceptor heterojunction, comprising copper-hexadecafluoro-phthalocyanine (F16CuPc) and copper phthalocyanine (CuPc), undergoes an obvious orientation transition from a standing configuration (molecular π-plane nearly perpendicular to the substrate surface) on the bare ITO electrode to a less standing configuration with the molecular π-plane stacking adopting a large projection along the direction perpendicular to the electrode surface on the CVD graphene-modified ITO electrode. Such templated less-standing configuration of the organic heterojunction could significantly enhance the efficiency of charge transport along the direction perpendicular to the electrode surface in the planar heterojunction-based devices. Compared with the typical standing organic-organic heterojunction on the bare ITO electrode, our in situ ultraviolet photoelectron spectroscopy experiments reveal that the heterojunction on the CVD graphene modified ITO electrode possesses better aligned energy levels with respective electrodes, hence facilitating effective charge collection.