Analysis of palatal marginal alveolar exostosis and palatal torus using cone-beam computed tomography.

The aim of the present study was to analyze palatal marginal alveolar exostosis (PMAE) and palatal torus (PT). Cone-beam computed tomography (CBCT) of the maxilla in multiplanar sections and volumetric renderings were used to assess this. PT and PMAE were classified according to location and morphology. Height, width, length, and thickness of the overlying mucosa were determined. The prevalence of PT and PMAE was assessed according to sex and age group. The correlation between the occurrence of PMAE and PT was also evaluated. A total of 385 CBCT scans were examined. PT was found in 38.70% of the sample and located more frequently in the middle third of the maxilla (52.35%) with a flat shape (42.95%). PMAE was found in 54.80% of the sample, bilaterally in 56.40% of the cases, and located more frequently in the molar region (62.42%) in the form of small nodules (36.97%). The mucosa covering PMAE was generally thicker than that over PT. The use of CBCT for the identification of PT and PMAE in vivo showed high frequencies of both conditions. The occurrence of PMAE was independent of the presence of PT.

Key insights into antiresorptive drug use and osteonecrosis in osteoporotic patients undergoing tooth extractions: A clinical and CBCT assessment.

This study investigates the effects of antiresorptive drugs and risk factors for medication-related osteonecrosis of the jaws in osteoporotic patients undergoing tooth extraction. Among the findings, antiresorptive-treated patients had thicker lamina dura and longer healing times. Additionally, corticosteroid intake and multi-rooted teeth carried a higher osteonecrosis risk. Bone sequestrum indicated osteonecrosis. PURPOSE: To describe the effects of antiresorptive drugs (ARD) in the maxilla and mandible and risk factors for medication-related osteonecrosis of the jaws (MRONJ) in osteoporotic patients undergoing tooth extractions using clinical data and cone beam computed tomography (CBCT). METHODS: This retrospective cohort study collected clinical and CBCT data from 176 patients. The study group (n = 78; 224 extractions) received ARD treatment, underwent tooth extraction, and had a pre-operative CBCT. Additionally, age-, sex-, and tooth-matched controls were selected (n = 98; 227 extractions). Radiographic examinations were performed independently by three calibrated examiners. Statistical analysis included Chi-square, Fisher's exact, Mann-Whitney U, and t-tests to contrast clinical and radiographic data between study and control, MRONJ + and MRONJ - , and bisphosphonate and denosumab patients/sites. Significance was set at p ≤ 0.05. RESULTS: From the study group, 4 patients (5%) and 5 sites (2%) developed MRONJ after tooth extraction. ARD-treated patients exhibited significantly more thickening of the lamina dura and a longer average mucosal healing time (4.4 weeks) than controls (2.6 weeks). In the study group, MRONJ risk significantly increased with corticosteroid intake and in multi-rooted teeth. No significant differences between bisphosphonates and denosumab use were seen in the tomographic features (p > 0.05). Lastly, bone sequestrum was exclusively observed in osteoporotic patients, who exhibited post-operative exposed bone or histological evidence of osteonecrosis. CONCLUSION: Osteoporotic patients under ARD may exhibit thickening of the lamina dura and prolonged post-operative healing. Among these patients, multi-rooted teeth are at higher risk for MRONJ than single-rooted teeth. Sequester formation is a radiographic indicator of osteonecrosis.

Using cryoprobes of different sizes combined with cone-beam computed tomography-derived augmented fluoroscopy and endobronchial ultrasound to diagnose peripheral pulmonary lesions: a propensity-matched study.

BACKGROUND: Endobronchial ultrasound (EBUS) and cone-beam computed tomography-derived augmented fluoroscopy (CBCT-AF) are utilized for the diagnosis of peripheral pulmonary lesions (PPLs). Combining them with transbronchial cryobiopsy (TBC) can provide sufficient tissue for genetic analysis. However, cryoprobes of different sizes have varying degrees of flexibility, which can affect their ability to access the target bronchus and potentially impact the accuracy. The aim of this study was to compare the diagnostic efficacy of cryoprobes of varying sizes in CBCT-AF and EBUS for the diagnosis of PPLs. METHODS: Patients who underwent endobronchial ultrasound-guided transbronchial biopsy (EBUS-TBB) and TBC combined with CBCT-AF for PPLs diagnosis between January 2021 and May 2022 were included. Propensity score matching and competing-risks regression were utilized for data analysis. Primary outcome was the diagnostic accuracy of TBC. RESULTS: A total of 284 patients underwent TBC, with 172 using a 1.7-mm cryoprobe (1.7 group) and 112 using a 1.1-mm cryoprobe (1.1 group). Finally, we included 99 paired patients following propensity score matching. The diagnostic accuracy of TBC was higher in the 1.1 group (80.8% vs. 69.7%, P = 0.050), with a similar rate of complications. Subgroup analysis also revealed that the 1.1 group had better accuracy when PPLs were located in the upper lobe (85.2% vs. 66.1%, P = 0.020), when PPLs were smaller than 20 mm (78.8% vs. 48.8%, P = 0.008), and when intra-procedural CBCT was needed to be used (79.5% vs. 42.3%, P = 0.001). TBC obtained larger specimens than TBB in both groups. There is still a trend of larger sample size obtained in the 1.7 group, but there is no statistically different between our two study groups (40.8 mm2 vs. 22.0 mm2, P = 0.283). CONCLUSIONS: The combination of TBC with CBCT-AF and EBUS is effective in diagnosing PPLs, and a thin cryoprobe is preferred when the PPLs located in difficult areas.

Real-time 3D-3D image fusion of CTA/CBCT roadmap fluoroscopy in the transcatheter mitral intervention.

Absence of periprocedural visualization of three-dimensional (3D) left heart anatomy and its surrounding structures in fluoroscopy may reduce the rate of successful transcatheter mitral valve repair. We proposed a multimodal imaging strategy based on 3D computed tomography (CT) angiography and 3D cone beam CT fusion images, which enabled real-time visual inspection of 3D cardiac structures on fluoroscopy, to optimize transcatheter mitral intervention. This new image fusion technology, together with standard transesophageal echocardiography guidance, improved the efficiency and safety of the procedure, and could be considered as a new workflow for transcatheter mitral valve intervention.

Radiomics in cone-beam breast CT for the prediction of axillary lymph node metastasis in breast cancer: a multi-center multi-device study.

OBJECTIVES: To develop a radiomics model in contrast-enhanced cone-beam breast CT (CE-CBBCT) for preoperative prediction of axillary lymph node (ALN) status and metastatic burden of breast cancer. METHODS: Two hundred and seventy-four patients who underwent CE-CBBCT examination with two scanners between 2012 and 2021 from two institutions were enrolled. The primary tumor was annotated in each patient image, from which 1781 radiomics features were extracted with PyRadiomics. After feature selection, support vector machine models were developed to predict ALN status and metastatic burden. To avoid overfitting on a specific patient subset, 100 randomly stratified splits were made to assign the patients to either training/fine-tuning or test set. Area under the receiver operating characteristic curve (AUC) of these radiomics models was compared to those obtained when training the models only with clinical features and combined clinical-radiomics descriptors. Ground truth was established by histopathology. RESULTS: One hundred and eighteen patients had ALN metastasis (N + (≥ 1)). Of these, 74 had low burden (N + (1~2)) and 44 high burden (N + (≥ 3)). The remaining 156 patients had none (N0). AUC values across the 100 test repeats in predicting ALN status (N0/N + (≥ 1)) were 0.75 ± 0.05 (0.67~0.93, radiomics model), 0.68 ± 0.07 (0.53~0.85, clinical model), and 0.74 ± 0.05 (0.67~0.88, combined model). For metastatic burden prediction (N + (1~2)/N + (≥ 3)), AUC values were 0.65 ± 0.10 (0.50~0.88, radiomics model), 0.55 ± 0.10 (0.40~0.80, clinical model), and 0.64 ± 0.09 (0.50~0.90, combined model), with all the ranges spanning 0.5. In both cases, the radiomics model was significantly better than the clinical model (both p < 0.01) and comparable with the combined model (p = 0.56 and 0.64). CONCLUSIONS: Radiomics features of primary tumors could have potential in predicting ALN metastasis in CE-CBBCT imaging. CLINICAL RELEVANCE STATEMENT: The findings support potential clinical use of radiomics for predicting axillary lymph node metastasis in breast cancer patients and addressing the limited axilla coverage of cone-beam breast CT. KEY POINTS: • Contrast-enhanced cone-beam breast CT-based radiomics could have potential to predict N0 vs. N + (≥ 1) and, to a limited extent, N + (1~2) vs. N + (≥ 3) from primary tumor, and this could help address the limited axilla coverage, pending future verifications on larger cohorts. • The average AUC of radiomics and combined models was significantly higher than that of clinical models but showed no significant difference between themselves. • Radiomics features descriptive of tumor texture were found informative on axillary lymph node status, highlighting a higher heterogeneity for tumor with positive axillary lymph node.

Improving culprit artery identification with intraprocedural cone-beam CT aortography and its clinical impact in bronchial artery embolization.

OBJECTIVE: To evaluate the impact of intraprocedural cone-beam CT (CBCT) aortography on culprit artery identification and clinical outcomes in patients undergoing bronchial artery embolization (BAE). MATERIALS AND METHODS: Two hundred eighty-two patients with 317 BAE procedures were retrospectively reviewed. Patients who underwent preprocedural chest CT angiography (CTA) without intraprocedural CBCT aortography were categorized as Group A (n = 177). Patients who underwent both preprocedural chest CTA and intraprocedural CBCT aortography were categorized as Group B (n = 105). Whether CBCT can provide improved culprit artery identification and whether this improvement has a clinical impact were evaluated by comparing the two Groups. RESULTS: In Group B, CBCT aortography detected more culprit non-bronchial systemic arteries originating from the subclavian arteries compared to chest CTA (16 vs 3, p = 0.026), and the average number of embolized vessels was significantly higher than in Group A (2.47 ± 1.61 vs 2.03 ± 1.17, p = 0.016), while the procedure time was shorter (37.4 ± 22.0 vs 43.6 ± 22.7 min, p = 0.024). The recurrent hemoptysis rate was lower in Group B (17.5% vs 8.7%, p = 0.041), and the proportion of patients requiring subsequent procedures was significantly lower (12.4% vs 4.8%, p = 0.035). The changes in estimated glomerular filtration rate before and 3 days after the procedure (0.1 ± 12.8 vs 0.3 ± 11.0 mL/min/1.73 m2, p = 0.909) and total dose area product (DAP, 6119.5 ± 5725.7 vs 6906.2 ± 5978.6 uGym2, p = 0.279) were not significantly different between the two groups. CONCLUSION: BAE with intraprocedural CBCT aortography enabled the embolization of more culprit arteries, leading to lower recurrent hemoptysis rates without increasing the risk of renal deterioration and radiation hazards when compared to procedures without it. KEY POINTS: Question Does intraprocedural CBCT aortography improve culprit artery detection and clinical outcomes in BAE for hemoptysis? Findings CBCT aortography significantly improved the detection of additional culprit arteries, especially from non-bronchial systemic arteries, increasing the number of vessels treated during BAE. Clinical relevance Using CBCT aortography during BAE results in better long-term outcomes by reducing recurrent hemoptysis and the need for additional procedures, without increasing the risk of renal impairment.

Exploratory analysis of new craniometric measures for the investigation of biological sex using open-access statistical and machine-learning tools on a cone-beam computed tomography sample.

Investigation of the biological sex of human remains is a crucial aspect of physical anthropology. However, due to varying states of skeletal preservation, multiple approaches and structures of interest need to be explored. This research aims to investigate the potential use of distances between bifrontal breadth (FMB), infraorbital foramina distance (IOD), nasal breadth (NLB), inter-canine width (ICD), and distance between mental foramina (MFD) for combined sex prediction through traditional statistical methods and through open-access machine-learning tools. Ethical approval was obtained from the ethics committee, and out of 100 cone beam computed tomography (CBCT) scans, 54 individuals were selected with all the points visible. Ten extra exams were chosen to test the predictors developed from the learning sample. Descriptive analysis of measurements, standard deviation, and standard error were obtained. T-student and Mann-Whitney tests were utilized to assess the sex differences within the variables. A logistic regression equation was developed and tested for the investigation of the biological sex as well as decision trees, random forest, and artificial neural networks machine-learning models. The results indicate a strong correlation between the measurements and the sex of individuals. When combined, the measurements were able to predict sex using a regression formula or machine learning based models which can be exported and added to software or webpages. Considering the methods, the estimations showed an accuracy rate superior to 80% for males and 82% for females. All skulls in the test sample were accurately predicted by both statistical and machine-learning models. This exploratory study successfully established a correlation between facial measurements and the sex of individuals, validating the prediction potential of machine learning, augmenting the investigative tools available to experts with a high differentiation potential.

Metric evaluation of the anterior nasal spine to estimate sex and population group in South African individuals.

INTRODUCTION: The anterior nasal spine is a pointed, midline projection of the maxilla. This bony structure dictates the overlying soft tissues providing the phenotypic features of the nose and upper lip and determines the differences in the mid-face morphology. Little data is available on the metric features of the Anterior nasal spine (ANS). This study aimed to perform metric evaluations of the ANS of white and black South African males and females to ascertain if morphological variations exist and if the differences are viable for the use in sex and population identification. MATERIALS AND METHODS: The sample included 100 CBCT images for each population and sex group. Linear and angular measurements of the ANS were recorded in both the sagittal and axial planes. RESULTS: Classification decision trees (pruned) were fitted to ascertain the relationship between population group, sex and the ANS measurements including and excluding age. For population group, all the ANS measurements were statistically significant for females but in males, all the ANS measurements were significant when performed individually. However, when fitted to the classification tree, Sagittal 2 did not show any statistical significance. When considering sex, only 2 of the ANS measurements (Sagittal 2 and Axial 1) were found to be significant. The results did not differ significantly when comparing the decision trees including and excluding age. CONCLUSIONS: White South African individuals presented with a longer ANS that produced a more acute angle whereas black South African individuals presented with a shorter ANS and a more obtuse angle. Additionally, males presented with a longer ANS compared to females. ANS measurements were found to be more relevant for population discernment than for sex.

Accuracy of cone-beam computed tomography in imaging the components of the periodontal phenotype.

The components and dimensions of the periodontal and peri-implant phenotype have a high relevance in contemporary dental research and should be taken into consideration in the decision-making process in the management of a variety of clinical scenarios to optimize the outcomes of therapy. Various assessment methods for quantifying and classifying the phenotypical dimensions have emerged and developed in recent decades. Nevertheless, the use of cone-beam computed tomography (CBCT) scans remains the most commonly used approach worldwide. However, the accuracy to adequately imaging and measuring the dimensions of the hard and soft tissue components around teeth may represent a significant challenge in different clinical scenarios due to factors such as the age of the patient and motion during the scan, presence of metallic artifacts causing streaks and gray-value distortion, overlapping of soft tissue structures, machine performance, file processing, and small voxel size among others. These factors pose a particular challenge when tiny structures are under investigation, for example, the buccal/lingual bony or soft tissue layer of lower/upper incisors. Therefore, this review addresses the underlying technical information of the use of CBCT scans, and suggests some recommendations on the utilization of this method of assessment to optimally use it despite its' system-inherent limitations.

Radiographic assessment of the peri-implant site.

While peri-implant mucositis relies solely on clinical parameters, radiological assessment becomes indispensable for diagnosing peri-implantitis. Intraoral radiography, with its simplicity of application, low radiation exposure, and adequate representation of peri-implant structures, stands out as the standard of care for both immediate and follow-up assessments. Standardization by custom-made radiologic splints allows for excellent comparability with previous images and allows for the determination of even small changes in contour and density of the peri-implant bone. Furthermore, other radiographic modalities like panoramic radiography and cone beam computed tomography (CBCT) may provide useful features for specific patients and clinical cases while also showing innate limitations. Beyond the assessment of the marginal peri-implant bone level as the crucial parameter of clinical relevance, radiologic assessment may reveal various other findings related to the prosthetic restoration itself, the precision of its fit to the implant, and the peri-implant soft and hard tissues. Since such findings can be crucial for the assessment of peri-implant health and the implants' prognosis, a systematic diagnostic evaluation pathway for a thorough assessment is recommended to extract all relevant information from radiologic imaging. This article also provides an overview of the clinical and chronological indications for different imaging modalities in peri-implant issues.

The influence of different extraction indications on the morphological changes in the maxillary sinus: A retrospective cohort study.

AIMS: The comprehensive effects of maxillary posterior tooth extraction on the maxillary sinus (MS) morphology remain to be thoroughly elucidated. This retrospective cohort study aimed at evaluating the influence of different extraction indications on the morphological changes in the MS by utilizing cone-beam computed tomography (CBCT). METHODS: One hundred and seventy-eight of maxillary posterior tooth extractions underwent CBCT scans before and after extraction using 3D Slicer software. Parameters such as maxillary sinus pneumatization (MSP, the primary outcome measure), buccal bone height (BBH), palatal bone height (PBH), mucosal thickness (MT), and other anatomical structures were measured for patients undergoing extraction due to periodontitis, periapical lesions, or tooth fracture. Multiple linear regression analysis was employed to assess the effect of extraction indications on the MS. RESULTS: While the primary outcome, MSP, did not reveal statistically significant differences across various indications for tooth extraction (p > .05), extraction itself resulted in MSP (p < .05). The rate of this pneumatization was influenced by the position of the extraction site (p < .05). Additionally, baseline values of bone height and mucosal thickness showed an inverse correlation with the rate of change in these parameters following tooth extraction (p < .001). CONCLUSIONS: Tooth extraction led to increased pneumatization of the maxillary sinus while simultaneously reducing bone height and mucosal thickness. However, these outcomes were not influenced by the reason for tooth extraction.

Radiographic outcomes of lateral sinus floor elevation at sites without perforations and sites with perforations managed with a resorbable membrane: A retrospective study.

AIM: To evaluate the radiographic outcomes of lateral sinus floor elevation with simultaneous implant placement at sites without sinus membrane perforation (SMP) and sites with SMP managed with a resorbable membrane. MATERIALS AND METHODS: One hundred and thirty-nine patients and 170 implants (56 perforation, 114 non-perforation) were included. Cone-beam computed tomography (CBCT) images were taken before surgery (T0), immediately after surgery (T1) and 6 months after surgery (T2). Post-operative augmentation parameters, including endo-sinus bone gain (ESBG) along the implant axis, mean new bone height (NBH) surrounding the implant and augmentation volume (AV), were measured at T1 and T2. RESULTS: At T1, there were no significant differences in ESBG, NBH and AV between the two groups. At T2, although ESBG did not significantly differ between the two groups, NBH (8.50 ± 1.99 mm vs. 9.99 ± 2.52 mm, p = .039) and AV (519.37 ± 258.38 mm3 vs. 700.99 ± 346.53 mm3, p < .001) were significantly lower in the perforation group. The shrinkage of graft material from T1 to T2, including ΔESBG (p = .002), ΔNBH (p < .001) and ΔAV (p < .001), was higher in the perforation group. CONCLUSIONS: SMP during LSFE with simultaneous implant placement is associated with greater resorption of the grafted area at a 6-month follow-up.

Assessment of soft and hard tissue changes following micro crestal flap-Alveolar ridge preservation and augmentation at molar extraction sites in patients with stage III/IV periodontitis: A randomized controlled trial.

AIM: This study aimed to assess hard and soft tissue contour changes following micro crestal flap-alveolar ridge preservation (MCF-ARP) and natural healing (NH) in periodontally compromised molar extraction sites and to analyse the feasibility and need for bone augmentation during implant therapy. MATERIALS AND METHODS: Fifty-six patients with 70 sites were randomized into two groups at the site level (35 sites from 31 patients in the test group and 35 sites from 29 patients in the control group). Among whom, four patients contributed one tooth to the control group and one tooth to the test group. Hard tissue indicators were measured using cone beam computed tomography performed before tooth extraction and 6 months after surgery. Soft tissue contour changes were assessed using intraoral scanning performed before and immediately after surgery and also 2 weeks and 1, 3 and 6 months after surgery. RESULTS: Six months after surgery, the MCF-ARP group showed less resorption in buccal bone height (p = .032) and greater augmentation in central bone height (p = .001) and ridge width (p = .009). The mean, vertical and horizontal collapse of buccal soft tissue contour in the MCF-ARP group were 0.95 mm (p = .010), 0.61 mm (p = .019) and 0.56 mm (p = .013) less than that in the NH group, respectively. There were significantly (p = .007) fewer sites in the MCF-ARP group than in the NH group (0% vs. 26.7%) for staged bone augmentation and more sites that could be treated with simple implant procedure in the MCF-ARP group than in the NH group (71.9% vs. 56.6%). CONCLUSIONS: Compared with NH, MCF-ARP reduced bone resorption in periodontally compromised molar extraction sites and maintained the buccal soft tissue contour. MCF-ARP reduces the need for complex bone augmentation procedures in implant therapy. TRIAL REGISTRATION: Chinese Clinical Trial Register (ChiCTR) ChiCTR2200056335. Registered on 4 February 2022, Version 1.0.

Determinants of radiation exposure during mobile cone-beam CT-guided robotic-assisted bronchoscopy.

BACKGROUND AND OBJECTIVE: Robotic-assisted bronchoscopy (RAB) is an emerging modality to sample pulmonary lesions. Cone-beam computed tomography (CBCT) can be incorporated into RAB. We investigated the magnitude and predictors of patient and staff radiation exposure during mobile CBCT-guided shape-sensing RAB. METHODS: Patient radiation dose was estimated by cumulative dose area product (cDAP) and cumulative reference air kerma (cRAK). Staff equivalent dose was calculated based on isokerma maps and a phantom simulation. Patient, lesion and procedure-related factors associated with higher radiation doses were identified by logistic regression models. RESULTS: A total of 198 RAB cases were included in the analysis. The median patient cDAP and cRAK were 10.86 Gy cm2 (IQR: 4.62-20.84) and 76.20 mGy (IQR: 38.96-148.38), respectively. Among staff members, the bronchoscopist was exposed to the highest median equivalent dose of 1.48 µSv (IQR: 0.85-2.69). Both patient and staff radiation doses increased with the number of CBCT spins and targeted lesions (p < 0.001 for all comparisons). Patient obesity, negative bronchus sign, lesion size <2.0 cm and inadequate sampling by on-site evaluation were associated with a higher patient dose, while patient obesity and inadequate sampling by on-site evaluation were associated with a higher bronchoscopist equivalent dose. CONCLUSION: The magnitude of patient and staff radiation exposure during CBCT-RAB is aligned with safety thresholds recommended by regulatory authorities. Factors associated with a higher radiation exposure during CBCT-RAB can be identified pre-operatively and solicit procedural optimization by reinforcing radiation protective measures. Future studies are needed to confirm these findings across multiple institutions and practices.

Mobile cone-beam computed tomography complementing shape-sensing robotic-assisted bronchoscopy in the small pulmonary nodule sampling: A multicentre experience.

BACKGROUND AND OBJECTIVE: Shape-sensing robotic-assisted bronchoscopy (ssRAB) has expanded as an important diagnostic tool for peripheral pulmonary nodules (PPNs), with diagnostic yields ranging from 60% to 88%. However, sampling and diagnosing PPN less than 2 cm in size has historically been challenging. Mobile cone-beam computed tomography (mCBCT) has been recently integrated into ssRAB to improve diagnostic accuracy, but its added value remains uncertain. We aim to describe the role of mCBCT and determine if it provides any diagnostic advantage. METHODS: A multicentre, retrospective study on the use of ssRAB and mCBCT in two tertiary care institutions: Mayo Clinic Florida and Massachusetts General Hospital. The primary outcome was diagnostic yield and sensitivity for malignancy of ssRAB complemented with mCBCT, compared to ssRAB with the standard 2D fluoroscopy. RESULTS: A total of 192 nodules were biopsied from 173 patients. mCBCT was used in 117 (60.9%) nodules. The overall diagnostic yield was 85.4%. Diagnostic yield between subgroups with and without mCBCT was 83.8% and 88% (p = 0.417), respectively. The mCBCT group had fewer solid nodules (65.8% vs. 81.3%, p = 0.020) and a higher number of ground-glass nodules (10.3% vs. 1.3%, p = 0.016). CONCLUSION: Overall, diagnostic yield between subgroups with and without mCBCT was similar. The complementary use of mCBCT to ssRAB allows proceduralists to target more complex and subsolid PPNs with a diagnostic yield comparable to simple solid PPNs while maintaining an excellent safety profile.

A cross-sectional CBCT assessment of the relative position of one-piece titanium-zirconium mini-implants placed for mandibular overdentures using non-guided surgery.

OBJECTIVE: To assess the relative position of mini-implants to retain a mandibular overdenture, according to the surgical protocol, technical and anatomical factors. METHODS: Mandibular cone-beam computed tomography (CBCT) scans were analyzed for 73 patients who received four one-piece titanium-zirconium mini-implants. Drilling was performed using a 1.6 mm needle drill and a 2.2 mm Pilot Drill, according to the bone density with a surgical stent. Post-insertion CBCT images in DICOM format were analyzed using the E-Vol-DX software with BAR filters. Divergence angle between implants and between implants and the overdenture path of insertion was measured using CliniView 10.2.6 software. RESULTS: Divergence between implants ranged from 0° to 22.3° (mean = 4.2; SD = 3.7) in the lateral and from 0° to 26.2° (mean = 5.3; SD = 4.1) in the frontal projections (p < .001). Only 1 (0.2%) and 3 (0.7%) of the measurements were higher than 20° in the lateral and frontal views, respectively. The mean angulations between the implant and the path of insertion for the overdenture were 9.3° (SD = 7.5) and 4.0° (SD = 2.9) for the lateral and frontal views, respectively (p < .001). Regression analyses showed a significant association between the divergence of implants and the frontal view projection (p < .001), greater distance between the paired implants (p = .017), the flapped surgical protocol (p = .002), higher final insertion torque (p = .011), and deeper preparation with the needle drill (p < .001). CONCLUSIONS: The mini-implants were placed with low divergence angles and satisfactory parallelism. Factors including shorter distances between the implants, higher density bone, and a flapless surgical approach all contributed positively to improved parallelism of the mini-implants.

Guided bone regeneration for peri-implant augmentation: A retrospective study comparing two surgical techniques with a mean follow-up of 26 months.

OBJECTIVES: To introduce a modified guided bone regeneration (GBR) technique using intact periosteum and deproteinized bovine bone mineral (DBBM) for peri-implant augmentation and compare the clinical outcomes with those of conventional GBR. MATERIALS AND METHODS: Patients who received peri-implant augmentation in posterior sites between 2015 and 2021 were reviewed in this study. Group A was treated with a modified GBR technique, and Group B was treated with conventional GBR. For group comparison, propensity score matching was performed with a sensitivity analysis. The implant survival rate, dimensional changes in hard tissue, marginal bone loss (MBL), and peri-implant parameters were evaluated. RESULTS: In total, 114 implants from 98 patients were included. The implant survival rates were 95.74% in Group A and 95.00% in Group B during the follow-up period. At 6 months, the median horizontal thickness was recorded at 0.87 mm (IQ1-IQ3 = 0.00-1.75 mm) in Group A, exhibiting a relatively lower value compared to the corresponding measurement of 0.98 mm (IQ1-IQ3 = 0.00-1.89 mm) in Group B (p = .937). Vertical height displayed no statistically significant intergroup difference between the two groups (p = .758). The mean follow-up period was 25.83 ± 12.93 months after loading in Group A and 27.47 ± 21.29 months in Group B (p = .761). MBL and peri-implant parameters were comparable between the two groups. CONCLUSIONS: Within the limitations of this study, the modified GBR technique using intact periosteum and DBBM grafting might be a viable alternative to correct bone defects around implants in molar and premolar sites.

Do the number of zirconia implants and the thickness of CBCT image reconstruction affect the detection of peri-implant bone defect? A diagnostic accuracy ex vivo study.

OBJECTIVES: To evaluate the influence of multiplanar reconstruction thickness on the detection of peri-implant bone defects with a standalone zirconia implant and compare it to when another implant is in the vicinity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Five dry human mandibles were used to create twenty implant sites in the second premolar and first molar regions. The OP300 Maxio was used to acquire CBCT images (90 kVp, 6.3 mA, 5 × 5 cm FOV, and 0.125 mm3 voxel size) before and after creating 3 mm peri-implant bone defects in the buccal aspect of the premolar region. Half of the scans featured a single zirconia implant in the premolar region, while the others had two implants in the premolar and molar regions. Three reconstruction thicknesses (0.125 mm, 1 mm, and 2 mm) were considered for the multiplanar reconstruction analyses. Five oral and maxillofacial radiologists assessed the detection of peri-implant bone defects using a 5-point scale. Diagnostic parameters were calculated and compared using Two-way ANOVA (α = .05). RESULTS: The studied factors showed no significant influence on the diagnosis of peri-implant bone defects (p > .05). Diagnostic performance was notably higher with a single implant, especially with a 2-mm reconstruction thickness (AUC = 0.88, sensitivity = 0.68, specificity = 0.94). Although the differences were not statistically significant, the results were more modest when two implants were present (AUC = 0.80, sensitivity = 0.58, specificity = 0.82). CONCLUSIONS: The presence of an adjacent zirconia implant and variations in reconstruction thickness did not influence the detection of 3 mm buccal peri-implant bone defects on CBCT images.

Validation of a novel AI-based automated multimodal image registration of CBCT and intraoral scan aiding presurgical implant planning.

OBJECTIVES: The objective of this study is to assess accuracy, time-efficiency and consistency of a novel artificial intelligence (AI)-driven automated tool for cone-beam computed tomography (CBCT) and intraoral scan (IOS) registration compared with manual and semi-automated approaches. MATERIALS AND METHODS: A dataset of 31 intraoral scans (IOSs) and CBCT scans was used to validate automated IOS-CBCT registration (AR) when compared with manual (MR) and semi-automated registration (SR). CBCT scans were conducted by placing cotton rolls between the cheeks and teeth to facilitate gingival delineation. The time taken to perform multimodal registration was recorded in seconds. A qualitative analysis was carried out to assess the correspondence between hard and soft tissue anatomy on IOS and CBCT. In addition, a quantitative analysis was conducted by measuring median surface deviation (MSD) and root mean square (RMS) differences between registered IOSs. RESULTS: AR was the most time-efficient, taking 51.4 ± 17.2 s, compared with MR (840 ± 168.9 s) and SR approaches (274.7 ± 100.7 s). Both AR and SR resulted in significantly higher qualitative scores, favoring perfect IOS-CBCT registration, compared with MR (p = .001). Additionally, AR demonstrated significantly superior quantitative performance compared with SR, as indicated by low MSD (0.04 ± 0.07 mm) and RMS (0.19 ± 0.31 mm). In contrast, MR exhibited a significantly higher discrepancy compared with both AR (MSD = 0.13 ± 0.20 mm; RMS = 0.32 ± 0.14 mm) and SR (MSD = 0.11 ± 0.15 mm; RMS = 0.40 ± 0.30 mm). CONCLUSIONS: The novel AI-driven method provided an accurate, time-efficient, and consistent multimodal IOS-CBCT registration, encompassing both soft and hard tissues. This approach stands as a valuable alternative to manual and semi-automated registration approaches in the presurgical implant planning workflow.

Three-dimensional changes and influencing factors of tent space following osteotome sinus floor elevation without grafting: A 48-month retrospective radiographic study.

OBJECTIVES: To analyze the three-dimensional stability and morphologic changes of tent space after the osteotome sinus floor elevation (OSFE) procedures without bone grafts. MATERIALS AND METHODS: Forty-six implants placed using the OSFE technique with simultaneous implant placement without bone grafts were included in this retrospective study. Cone-beam computed tomography (CBCT) scans of the augmented sinuses were obtained pre- and postoperatively up to 48 months of follow-up. The maxillary sinus cavity profiles were outlined using three-dimensional virtual reconstruction and superimposition of CBCT scans. The three-dimensional changes in the tent space were measured. A generalized estimating equation (GEE) was used to explore potential factors. RESULTS: The implant survival rate was 97.8%. The mean volume of remaining tent space immediately after surgery was 96.8 ± 70.5 mm3, shrinking to 31.0 ± 24.9 mm3 after 48 months, while the mean percentage of remaining tent space volume decreased to 29.1 ± 20.7%. The tent space volume and the percentage of residual tent space volume only decreased significantly within 12 months after surgery (p = .008, .013). GEE results indicated positive correlations between the percentage of remaining tent space volume and implant protrusion length (p = .000) and apical height (p = .000), with a negative correlation between the sinus floor area immediately after surgery (p = .002) and the healing time (p = .022). CONCLUSIONS: The volume of the tent space rapidly shrank after OSFE without bone grafts. Several factors might influence the tent space stability. Long-term clinical trials with larger sample sizes are necessary to further validate the results.