Linear resistivity at van Hove singularities in twisted bilayer WSe2.

Different mechanisms driving a linear temperature dependence of the resistivity ρ ∼ T at van Hove singularities (VHSs) or metal-insulator transitions when doping a Mott insulator are being debated intensively with competing theoretical proposals. We experimentally investigate this using the exceptional tunability of twisted bilayer (TB) WSe2 by tracking the parameter regions where linear-in-T resistivity is found in dependency of displacement fields, filling, and magnetic fields. We find that even when the VHSs are tuned rather far away from the half-filling point and the Mott insulating transition is absent, the T-linear resistivity persists at the VHSs. When doping away from the VHSs, the T-linear behavior quickly transitions into a Fermi liquid behavior with a T2 relation. No apparent dependency of the linear-in-T resistivity, besides a rather strong change of prefactor, is found when applying displacement fields as long as the filling is tuned to the VHSs, including D ∼ 0.28 V/nm where a high-order VHS is expected. Intriguingly, such non-Fermi liquid linear-in-T resistivity persists even when magnetic fields break the spin-degeneracy of the VHSs at which point two linear in T regions emerge, for each of the split VHSs separately. This points to a mechanism of enhanced scattering at generic VHSs rather than only at high-order VHSs or by a quantum critical point during a Mott transition. Our findings provide insights into the many-body consequences arising out of VHSs, especially the non-Fermi liquid behavior found in moiré materials.

PBE-GGA predicts the B8↔B2 phase boundary of FeO at Earth's core conditions.

FeO is a crucial component of the Earth's core, and its thermodynamic properties are essential to developing more accurate core models. It is also a notorious correlated insulator in the NaCl-type (B1) phase at ambient conditions. It undergoes two polymorphic transitions at 300 K before it becomes metallic in the NiAs-type (B8) structure at ~100 GPa. Although its phase diagram is not fully mapped, it is well established that the B8 phase transforms to the CsCl-type (B2) phase at core pressures and temperatures. Here, we report a successful ab initio calculation of the B8↔B2 phase boundary in FeO at Earth's core pressures. We show that fully anharmonic free energies computed with the Perdew-Burke-Ernzerhof-generalized gradient approximation coupled with thermal electronic excitations reproduce the experimental phase boundary within uncertainties at P > 255 GPa, including the largely negative Clapeyron slope of -52 MPa/K. This study validates the applicability of a standard density functional theory functional to FeO under Earth's core conditions and demonstrates the theoretical framework that enables complex predictive studies of this region.

Selective hydroxyl generation for efficient pollutant degradation by electronic structure modulation at Fe sites.

Hydrogen peroxide (H2O2) is an important green oxidant in the field of sewage treatment, and how to improve its activation efficiency and generate free radicals with stronger oxidation performance is a key issue in current research. Herein, we synthesized a Cu-doped α-Fe2O3 catalyst (7% Cu-Fe2O3) for activation of H2O2 under visible light for degradation of organic pollutants. The introduction of a Cu dopant changed the d-band center of Fe closer to the Fermi level, which enhanced the adsorption and activation of the Fe site for H2O2, and the cleavage pathway of H2O2 changed from heterolytic cleavage to homolytic cleavage, thereby improving the selectivity of •OH generation. In addition, Cu doping also promoted the light absorption ability of α-Fe2O3 and the separation of hole-electron pairs, which enhanced its photocatalytic activities. Benefiting from the high selectivity of •OH, 7% Cu-Fe2O3 exhibited efficient degradation activities against ciprofloxacin, the degradation rate was 3.6 times as much as that of α-Fe2O3, and it had good degradation efficiency for a variety of organic pollutants.

In situ ligand-modulated activation of inert Ce(III/IV) into ozonation catalyst for efficient water treatment.

As a classic strategy to maximize catalytic activity, modulation of the electronic structure of central metal using organic ligands encounters great challenge in radical reactions exemplified by advanced oxidation processes (AOPs) due to operando destruction of employed ligands. Herein, we provide a paradigm achieving in situ ligand-modulated activation of the originally inert Ce(III/IV) for catalytic ozonation as a representative AOP widely applied in full-scale water treatment. Among the small-molecule carboxylates typically produced from pollutant degradation during ozonation, we find oxalate (OA) is a potent ligand to activate Ce(III/IV), inducing 11.5- and 5.8-fold elevation in rate constants of O3 decomposition and atrazine degradation, respectively. The Ce(III)-OA complex is proved the catalytic active species to boost pollutant degradation, while the catalytic ozonation unusually involves both •OH-dependent and •OH-independent pathways with comparable contributions. Both experiment and density functional theory calculation results show the pronounced electron donating effect of OA as evidenced by the substantial decreases in the charge residing on Ce, the ionization potential, and the Ce(III/IV) electrode potential, affords the activation of the Ce center for efficient ozonation. A comprehensive kinetic model involving 67 reactions is established to verify and elaborate the catalytic mechanism. Moreover, with in situ OA production, trace Ce3+ enables autocatalytic mineralization and codegradation of typical contaminants, which are not observed in case of Fe2+ or Cu2+. In addition, Ce3+ outperforms numerous state-of-the-art ozonation catalysts in terms of mass activity. This study sheds light on sustainable activation of the metal center harnessing operando ligands produced from the catalyzed reaction.

Self-driven carbon atom implantation into fullerene embedding metal-carbon cluster.

Hundreds of members have been synthesized and versatile applications have been promised for endofullerenes (EFs) in the past 30 y. However, the formation mechanism of EFs is still a long-standing puzzle to chemists, especially the mechanism of embedding clusters into charged carbon cages. Here, based on synthesis and structures of two representative vanadium-scandium-carbido/carbide EFs, VSc2C@Ih (7)-C80 and VSc2C2@Ih (7)-C80, a reasonable mechanism-C1 implantation (a carbon atom is implanted into carbon cage)-is proposed to interpret the evolution from VSc2C carbido to VSc2C2 carbide cluster. Supported by theoretical calculations together with crystallographic characterization, the single electron on vanadium (V) in VSc2C@Ih (7)-C80 is proved to facilitate the C1 implantation. While the V=C double bond is identified for VSc2C@Ih (7)-C80, after C1 implantation the distance between V and C atoms in VSc2C2@Ih (7)-C80 falls into the range of single bond lengths as previously shown in typical V-based organometallic complexes. This work exemplifies in situ self-driven implantation of an outer carbon atom into a charged carbon cage, which is different from previous heterogeneous implantation of nonmetal atoms (Group-V or -VIII atoms) driven by high-energy ion bombardment or high-pressure offline, and the proposed C1 implantation mechanism represents a heretofore unknown metal-carbon cluster encapsulation mechanism and can be the fundamental basis for EF family genesis.

Fermionic wave functions from neural-network constrained hidden states.

We introduce a systematically improvable family of variational wave functions for the simulation of strongly correlated fermionic systems. This family consists of Slater determinants in an augmented Hilbert space involving "hidden" additional fermionic degrees of freedom. These determinants are projected onto the physical Hilbert space through a constraint that is optimized, together with the single-particle orbitals, using a neural network parameterization. This construction draws inspiration from the success of hidden-particle representations but overcomes the limitations associated with the mean-field treatment of the constraint often used in this context. Our construction provides an extremely expressive family of wave functions, which is proved to be universal. We apply this construction to the ground-state properties of the Hubbard model on the square lattice, achieving levels of accuracy that are competitive with those of state-of-the-art variational methods.

Identification of Fenton-like active Cu sites by heteroatom modulation of electronic density.

Developing heterogeneous catalysts with atomically dispersed active sites is vital to boost peroxymonosulfate (PMS) activation for Fenton-like activity, but how to controllably adjust the electronic configuration of metal centers to further improve the activation kinetics still remains a great challenge. Herein, we report a systematic investigation into heteroatom-doped engineering for tuning the electronic structure of Cu-N4 sites by integrating electron-deficient boron (B) or electron-rich phosphorus (P) heteroatoms into carbon substrate for PMS activation. The electron-depleted Cu-N4/C-B is found to exhibit the most active oxidation capacity among the prepared Cu-N4 single-atom catalysts, which is at the top rankings of the Cu-based catalysts and is superior to most of the state-of-the-art heterogeneous Fenton-like catalysts. Conversely, the electron-enriched Cu-N4/C-P induces a decrease in PMS activation. Both experimental results and theoretical simulations unravel that the long-range interaction with B atoms decreases the electronic density of Cu active sites and down-shifts the d-band center, and thereby optimizes the adsorption energy for PMS activation. This study provides an approach to finely control the electronic structure of Cu-N4 sites at the atomic level and is expected to guide the design of smart Fenton-like catalysts.

Nanozyme Catalytic Performance Enhancement through Defect and Electronic Structure Regulation of Metal-Doped NiCo2O4@Pd.

Spinel oxides have emerged as a promising candidate in the realm of nanozymes with variable oxidation states, while their limited active sites and low conductivity hinder further application. In this work, we synthesize a series of metal-doped NiCo2O4 nanospheres decorated with Pd, which are deployed as highly efficient nanozymes for the detection of cancer biomarkers. Through meticulous modulation of the molar ratio between NiCo2O4 and Pd, we orchestrated precise control over the oxygen vacancies and electronic structure within the nanozymes, a key factor in amplifying the catalytic prowess. Leveraging the superior H2O2 reduction catalytic properties of Fe-NiCo2O4@Pd, we have successfully implemented its application in the electrochemical detection of biomarkers, achieving unparalleled analytical performance, much higher than that of Pd/C and other reported nanozymes. This research paves the way for innovative electron modification strategies in the design of high-performance nanozymes, presenting a formidable tool for clinical diagnostic analyses.

Enabling Ultrafine Ru Nanoparticles with Tunable Electronic Structures via a Double-Shell Hollow Interlayer Confinement Strategy toward Enhanced Hydrogen Evolution Reaction Performance.

Engineering of the catalysts' structural stability and electronic structure could enable high-throughput H2 production over electrocatalytic water splitting. Herein, a double-shell interlayer confinement strategy is proposed to modulate the spatial position of Ru nanoparticles in hollow carbon nanoreactors for achieving tunable sizes and electronic structures toward enhanced H2 evolution. Specifically, the Ru can be anchored in either the inner layer (Ru-DSC-I) or the external shell (Ru-DSC-E) of double-shell nanoreactors, and the size of Ru is reduced from 2.2 to 0.9 nm because of the double-shell confinement effect. The electronic structures are efficiently optimized thereby stabilizing active sites and lowering the reaction barrier. According to finite element analysis results, the mesoscale mass diffusion can be promoted in the double-shell configuration. The Ru-DSC-I nanoreactor exhibits a much lower overpotential (η10 = 73.5 mV) and much higher stability (100 mA cm-2). Our work might shed light on the precise design of multishell catalysts with efficient refining electrostructures toward electrosynthesis applications.

Persistence of Structural Distortion and Bulk Band Rashba Splitting in SnTe above Its Ferroelectric Critical Temperature.

The ferroelectric semiconductor α-SnTe has been regarded as a topological crystalline insulator, and the dispersion of its surface states has been intensively measured with angle-resolved photoemission spectroscopy (ARPES) over the past decade. However, much less attention has been given to the impact of the ferroelectric transition on its electronic structure, and in particular on its bulk states. Here, we investigate the low-energy electronic structure of α-SnTe with ARPES and follow the evolution of the bulk-state Rashba splitting as a function of temperature, across its ferroelectric critical temperature of about Tc ≈ 110 K. Unexpectedly, we observe a persistent band splitting up to room temperature, which is consistent with an order-disorder contribution of local dipoles to the phase transition that requires the presence of fluctuating dipoles above Tc. We conclude that no topological surface state can occur under these conditions at the (111) surface of SnTe, at odds with recent literature.

Bottom-up Synthesis and Characterization of Porous 12-Atom-Wide Armchair Graphene Nanoribbons.

Although several porous carbon/graphene nanoribbons (GNRs) have been prepared, a direct comparison of the electronic properties between a nonporous GNR and its periodically perforated counterpart is still missing. Here, we report the synthesis of porous 12-atom-wide armchair-edged GNRs from a bromoarene precursor on a Au(111) surface via hierarchical Ullmann and dehydrogenative coupling. The selective formation of porous 12-GNRs was achieved through thermodynamic and kinetic reaction control combined with tailored precursor design. The structure and electronic properties of the porous 12-GNR were elucidated by scanning tunneling microscopy/spectroscopy and density functional theory calculations, revealing that the pores induce a 2.17 eV band gap increase compared to the nonporous 12-AGNR on the same surface.

Excited State Band Mapping and Ultrafast Nonequilibrium Dynamics in Topological Dirac Semimetal 1T-ZrTe2.

We performed time- and polarization-resolved extreme ultraviolet momentum microscopy on the topological Dirac semimetal candidate 1T-ZrTe2. Excited state band mapping uncovers the previously inaccessible linear dispersion of the Dirac cone above the Fermi level. We study the orbital texture of bands using linear dichroism in photoelectron angular distributions. These observations provide hints about the topological character of 1T-ZrTe2. Time-, energy-, and momentum-resolved nonequilibrium carrier dynamics reveal that intra- and interband scattering processes play a major role in the relaxation mechanism, leading to multivalley electron-hole accumulation near the Fermi level. We also show that electrons' inverse lifetime has a linear dependence as a function of their excess energy. Our time- and polarization-resolved XUV photoemission results shed light on the excited state electronic structure of 1T-ZrTe2 and provide valuable insights into the relatively unexplored field of quantum-state-resolved ultrafast dynamics in 3D topological Dirac semimetals.

On-Surface Boronation of Porphyrin into a Molecular Dipole.

Functionalized porphyrins by introducing exotic atoms into their central cavities have significant applications across various fields. As unique nanographenes, porphyrins functionalized with monoboron are intriguing, yet their synthesis remains highly challenging. Herein, we present the first on-surface boronation of porphyrin, bonding a single boron atom into the porphyrin's cavity. The boronation is selective, being observed exclusively in molecules featuring a specific aromatic ring-fused structure (ARFS*), not the pristine porphyrin molecule or its other ARFS forms. The boron's bonding geometry is noncentered, transforming the boronated porphyrin into a molecular dipole and imparting a markedly varied electronic structure. Well-ordered two-dimensional dipole arrays are achieved. Upon elevated thermoactivation, intermolecular O-B-O bonds provide robustness and flexibility to the molecular chains. This work demonstrates the high selectivity of on-surface porphyrin boronation and provides an effective strategy for tailoring molecules' electronic structure, producing molecular dipoles, and promoting the robustness and flexibility of molecular chains.

Bridging the gap between surface physics and photonics.

Use and performance criteria of photonic devices increase in various application areas such as information and communication, lighting, and photovoltaics. In many current and future photonic devices, surfaces of a semiconductor crystal are a weak part causing significant photo-electric losses and malfunctions in applications. These surface challenges, many of which arise from material defects at semiconductor surfaces, include signal attenuation in waveguides, light absorption in light emitting diodes, non-radiative recombination of carriers in solar cells, leakage (dark) current of photodiodes, and light reflection at solar cell interfaces for instance. To reduce harmful surface effects, the optical and electrical passivation of devices has been developed for several decades, especially with the methods of semiconductor technology. Because atomic scale control and knowledge of surface-related phenomena have become relevant to increase the performance of different devices, it might be useful to enhance the bridging of surface physics to photonics. Toward that target, we review some evolving research subjects with open questions and possible solutions, which hopefully provide example connecting points between photonic device passivation and surface physics. One question is related to the properties of the wet chemically cleaned semiconductor surfaces which are typically utilized in device manufacturing processes, but which appear to be different from crystalline surfaces studied in ultrahigh vacuum by physicists. In devices, a defective semiconductor surface often lies at an embedded interface formed by a thin metal or insulator film grown on the semiconductor crystal, which makes the measurements of its atomic and electronic structures difficult. To understand these interface properties, it is essential to combine quantum mechanical simulation methods. This review also covers metal-semiconductor interfaces which are included in most photonic devices to transmit electric carriers to the semiconductor structure. Low-resistive and passivated contacts with an ultrathin tunneling barrier are an emergent solution to control electrical losses in photonic devices.

Spin Effect to Regulate the Electronic Structure of Ir─Fe Aerogels for Efficient Acidic Water Oxidation.

"Spin" has been recently reported as an important degree of electronic freedom to promote catalysis, yet how it influences electronic structure remains unexplored. This work reports the spin-induced orbital hybridization in Ir─Fe bimetallic aerogels, where the electronic structure of Ir sites is effectively regulated by tuning the spin property of Fe atoms. The spin-optimized electronic structure boosts oxygen evolution reaction (OER) electrocatalysis in acidic media, resulting in a largely improved catalytic performance with an overpotential of as low as 236 mV at 10 mA cm-2. Furthermore, the gelation kinetics for the aerogel synthesis is improved by an order of magnitude based on the introduction of a magnetic field. Density functional theory calculation reveals that the increased magnetic moment of Fe (3d orbital) changes the d-band structure (i.e., the d-band center and bandwidth) of Ir (5d orbital) via orbital hybridization, resulting in optimized binding of reaction intermediates. This strategy builds the bridge between the electron spin theory with the d-band theory and provides a new way for the design of high-performance electrocatalysts by using spin-induced orbital interaction.

Recent Advancements on Spin Engineering Strategies for Highly Efficient Electrocatalytic Oxygen Evolution Reactions.

Oxygen evolution reaction (OER) is a widely employed half-electrode reaction in oxygen electrochemistry, in applications such as hydrogen evolution, carbon dioxide reduction, ammonia synthesis, and electrocatalytic hydrogenation. Unfortunately, its slow kinetics limits the commercialization of such applications. It is therefore highly imperative to develop highly robust electrocatalysts with high activity, long-term durability, and low noble-metal contents. Previously intensive efforts have been made to introduce the advancements on developing non-precious transition metal electrocatalysts and their OER mechanisms. Electronic structure tuning is one of the most effective and interesting ways to boost OER activity and spin angular momentum is an intrinsic property of the electron. Therefore, modulation on the spin states and the magnetic properties of the electrocatalyst enables the changes on energy associated with interacting electron clouds with radical absorbance, affecting the OER activity and stability. Given that few review efforts have been made on this topic, in this review, the-state-of-the-art research progress on spin-dependent effects in OER will be briefed. Spin engineering strategies, such as strain, crystal surface engineering, crystal doping, etc., will be introduced. The related mechanism for spin manipulation to boost OER activity will also be discussed. Finally, the challenges and prospects for the development of spin catalysis are presented. This review aims to highlight the significance of spin engineering in breaking the bottleneck of electrocatalysis and promoting the practical application of high-efficiency electrocatalysts.

Copper Sulfide based Photocatalysts, Electrocatalysts and Photoelectrocatalysts: Innovations in Structural Modulation and Application.

Copper sulfides (CuxS, 1 ≤ x ≤ 2) are notable for their unique photoelectric properties and potential applications, particularly in photo/electrocatalysis. These materials are valued for their tunable band gap, near-infrared optical characteristics, and plasmonic resonance effects. However, challenges such as low catalytic activity and limited stability impede their practical applications. This review addresses these issues by exploring advanced strategies for electronic structure modulation, including atomic doping, shape alteration, heterojunction construction, and defect introduction to enhance catalytic efficiency. A detailed analysis of the optical and electrical properties of CuxS across various stoichiometric ratios and crystal structures is provided, offering a comprehensive overview of their applications in photocatalysis, electrocatalysis, and photo/electrocatalysis. Additionally, the review synthesizes current knowledge and highlights the potential of these strategies to optimize CuxS-based photo/electrocatalysts, proposing future research directions to bridge the gap between theoretical studies and practical applications. This work underscores the importance of CuxS in photo/electrocatalysis and aims to inspire further innovation and exploration in this field, emphasizing its significance in material science and engineering.

High-Energy Facet Engineering for Electrocatalytic Applications.

The design of high-energy facets in electrocatalysts has attracted significant attention due to their potential to enhance electrocatalytic activity. In this review, the significance of high-energy facets in various electrochemical reactions are highlighted, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CRR). Their importance in various electrochemical reactions and present strategies for constructing high-energy facets are discussed, including alloying, heterostructure formation, selective etching, capping agents, and coupling with substrates. These strategies enable control over crystallographic orientation and surface morphology, fine-tuning electrocatalytic properties. This study also addresses future directions and challenges, emphasizing the need to better understand fundamental mechanisms. Overall, high-energy facets offer exciting opportunities for advancing electrocatalysis.

Porous Tellurium-Doped Ruthenium Dioxide Nanotubes for Enhanced Acidic Water Oxidation.

Electrocatalysts with high activity and durability for acidic oxygen evolution reaction (OER) play a crucial role in achieving cost-effective hydrogen production via proton exchange membrane water electrolysis. A novel electrocatalyst, Te-doped RuO2 (Te-RuO2) nanotubes, synthesized using a template-directed process, which significantly enhances the OER performance in acidic media is reported. The Te-RuO2 nanotubes exhibit remarkable OER activity in acidic media, requiring an overpotential of only 171 mV to achieve an anodic current density of 10 mA cm-2. Furthermore, they maintain stable chronopotentiometric performance under 10 mA cm-2 in acidic media for up to 50 h. Based on the experimental results and density functional calculations, this significant improvement in OER performance to the synergistic effect of large specific surface area and modulated electronic structure resulting from the doping of Te cations is attributed.

Structure and Electron Engineering for Nitrate Electrocatalysis to Ammonia: Identification and Modification of Active Sites in Spinel Oxides.

Cobalt spinel oxides, which consist of tetrahedral site (AO4) and octahedral site (BO6), are a potential group of transition metal oxides (TMO) for electrocatalytic nitrate reduction reactions to ammonia (NRA). Identifying the true active site in spinel oxides is crucial to designing advanced catalysts. This work reveals that the CoO6 site is the dominant site for NRA through the site substitution strategy. The suitable electronic configuration of Co at the octahedral site leads to a stronger interaction between the Co d-orbital and the O p-orbital in O-containing intermediates, resulting in a high-efficiency nitrate-to-ammonia reduction. Furthermore, the substitution of metallic elements at the AO4 site can affect the charge density at the BO6 site via the structure of A-O-B. Thereafter, Ni and Cu are introduced to replace the tetrahedral site in spinel oxides and optimize the electronic structure of CoO6. As a result, NiCo2O4 exhibits the best activity for NRA with an outstanding yield of NH3 (15.49 mg cm-2 h-1) and FE (99.89%). This study introduces a novel paradigm for identifying the active site and proposes an approach for constructing high-efficiency electrocatalysts for NRA.