Definition, detection, and tracking of nanowaste in foods: Challenges and perspectives.

Commercial applications of nanotechnology in the food industry are rapidly increasing. Accordingly, there is a simultaneous increase in the amount and diversity of nanowaste, which arise as byproducts in the production, use, disposal, or recycling processes of nanomaterials utilized in the food industry. The potential risks of this nanowaste to human health and the environment are alarming. It is of crucial significance to establish analytical methods and monitoring systems for nanowaste to ensure food safety. This review provides comprehensive information on nanowaste in foods as well as comparative material on existing and new analytical methods for the detection of nanowaste. The article is specifically focused on nanowaste in food systems. Moreover, the current techniques, challenges as well as potential use of new and progressive methods are underlined, further highlighting advances in technology, collaborative efforts, as well as future perspectives for effective nanowaste detection and tracking. Such detection and tracking of nanowaste are required in order to effectively manage this type ofwasted in foods. Although there are devices that utilize spectroscopy, spectrometry, microscopy/imaging, chromatography, separation/fractionation, light scattering, diffraction, optical, adsorption, diffusion, and centrifugation methods for this purpose, there are challenges to be overcome in relation to nanowaste as well as food matrix and method characteristics. New technologies such as radio-frequency identification, Internet of things, blockchain, data analytics, and machine learning are promising. However, the cooperation of international organizations, food sector, research, and political organizations is needed for effectively managing nanowaste. Future research efforts should be focused on addressing knowledge gaps and potential strategies for optimizing nanowaste detection and tracking processes.

An eclectic approach to monitor and manage the disposal of carbon nanotubes.

Nanotechnology, in general, and nanomaterials in particular, have conferred and are continuing to confer many benefits to mankind, just as the advent of "plastics" did in previous generations. In the case of carbon nanotubes, which can be produced in vast quantities, documented methods to manage this carbon nanotube waste by recycling and or safe disposal are so minimal that it is a matter of great concern that the paucity of studies on managing carbon nanotube waste may lead to complacency. The latter could be a trigger for human illnesses, through poor handling of carbon nanotube waste. The present study investigated ways to manage recycling and disposal of waste carbon nanotubes and a limited study of some aspects of the toxicity of waste carbon nanotubes in the environment. An eclectic approach was adopted for this study, involving an application and analysis of questionnaires, to ascertain the current practices used by practitioners in carbon nanotube research, as well as experimental work to determine the potential toxicity of carbon nanotubes. This investigation was undertaken to determine if a change from current practice is warranted in the light of the potential toxicity of carbon nanotubes (CNTs). Analysis of the questionnaires revealed the use of differing practices for the recycling and disposal of engineered nanomaterials (ENMs), implying that there is a dire need for a uniform code of practice. The toxicity study showed that carbon nanotubes did not kill earthworms in soil. However, worms were observed to be highly sensitive to increased concentrations of carbon nanotubes. The leaching in a soil column test showed that the movement of carbon nanotubes was inhibited, being confined mainly to the topmost layers of the soil. This is taken to imply that the water table is safe from possible contamination by CNTs.

Face masks and nanotechnology: Keep the blue side up.

Coronavirus Disease 2019 (COVID-19) is one of the biggest challenges of the 21st century. While researchers are working on vaccine development and elucidating the mechanism of action and evolution of the harmful SARS-CoV-2, the current most important public health measure, second only to social distancing, is the obligatory wearing of facial protection. The Centers for Disease Control and Prevention recommended in April 2020 that the public wear face coverings in areas with high rates of transmission based on epidemiological evidence on the strong relationship between mask wearing and pandemic control. This protection against SARS-CoV-2 and other airborne pathogens, boost the design and production of innovative solutions by industry stakeholders. Nanoparticles, nanofibers, and other pioneering technologies based on nanomaterials have been introduced in mask production chains to improve performance and confer antiviral properties. During an emergency like COVID-19, these products directly available to the public should be carefully analyzed in terms of efficacy and possible long-term effects on the wearers' skin and lungs as well as on the environment. This opinion paper provides a wealth of information on the role of nanotechnologies in improving the performance of facial masks and on possible future consequences caused by a poorly regulated use of nanotechnology in textiles.

Mobility and fate of ligand stabilized semiconductor nanoparticles in landfill leachates.

Semiconductor quantum dots (QDs) are nanocrystals used in diverse optoelectronics. At the end of their useful life they are likely to end up in landfills, where they could be mobilzed by infiltrating rain water. In this work, spectroscopic and light scattering techniques were employed to investigate the environmental fate of QDs exposed to leachates from Austrian landfill sites containing municipal solid and bulky wastes. Brij-58-coated CdSe QDs, a model for surfactant stabilized hydrophobic nanoparticles, primarily sedimented before being degraded on a slower timescale in the course of 6 months. In contrast, N-acetyl-l-cystein-coated CdTe QDs, which represent electrostatically stabilized nanoparticles with a small covalently linked stabilizing molecule, mainly underwent a degradation mechanism that was accelerated by temperature. 71-95 % of this QD type was still dispersed in all leachates after 6 months at low temperature. Leachate temperature and composition, such as the DOC, as well as the used particle coating determined the mechanistic route of clearance of sedimentation versus degradation. Our study shows, that mechanistic investigations are necessary to determine the persistence of nanoparticles depending on their coatings in waste matrices which can be further used to assess hazardous risks of such nanowastes.

Gold Recycling at Laboratory Scale: From Nanowaste to Nanospheres.

The market for products based on nanotechnology, and with it the use of nanomaterials and the generation of nanowaste, increases day by day. Among the vast variety of nanomaterials available, gold nanoparticles (AuNPs) are among the most studied and applied in commercial products. This current situation requires both the development of recovery methods to reduce the amount of nanowaste produced, and new synthetic methods that allow the reuse of recovered gold for new nanomaterial production, keeping in mind both economical and ecological considerations. In this work, a methodology to recover gold from aqueous laboratory nanowaste and transform it into an aqueous HAuCl4 solution was developed, using extremely simple procedures and readily available chemical reagents (NaCl, HCl, H2 O2 ) and allowing the recovery of more than 99 % of the original gold. The experiments were performed by using both simulated and real laboratory nanowastes, and practically the same results were obtained. Moreover, the subsequent use of the obtained aqueous HAuCl4 solution from the recovered gold to produce spherical AuNPs through a seed-mediated approach was demonstrated. Thus, this work presents for the first time a complete recycling cycle from nanowaste to the reagent and back to the nanomaterial.

Activated charcoal as a capture material for silver nanoparticles in environmental water samples.

Silver nanoparticles (AgNPs), due to their antibacterial activity, have been incorporated into numerous consumer products. Their environmental impact however, is currently unclear. Uncertainties surround the concentration, fate, and effects of AgNPs in aquatic environments. This study examined the suitability of activated charcoal as a capture material for AgNPs from water. Samples of 100 ppb AgNPs were initially generated and exposed to activated charcoal for 24 h to examine the ability of charcoal to capture AgNPs. The decrease in Ag concentration was measured using ICP-MS. Following initial investigations, the surface area of the charcoal was increased firstly with a pestle and mortar and secondly by milling the charcoal using a ball mill. The increased surface area of the milled charcoal increased the capture of the AgNPs from 11.9% to 63.6% for the 100 ppb samples. Further investigations were carried out examining the effect on the capture of AgNP concentration (with concentration ranging from 10 to 100 ppb), particle coating and the effect of exposure time to the activated charcoal. The capture of AgNP increased with decreasing concentration. A hydrochloric acid (HCl) leaching procedure was also developed which successfully removed the captured silver allowing the fraction captured by the charcoal to be quantified with an average of 94.8% recovery. The results show that milled activated charcoal, can successfully capture AgNPs from water samples, and that therefore, activated charcoal may prove to be a cost effective material for the remediation of waters impacted by AgNP or other nano-wastes.

Modeling the fate and end-of-life phase of engineered nanomaterials in the Japanese construction sector.

To date construction materials that contain engineered nanomaterials (ENMs) are available at the markets, but at the same time very little is known about their environmental fate. Therefore, this study aimed at modeling the potential fate of ENMs by using the example of the Japanese construction sector and by conducting a dynamic material flow analysis. Expert interviews and national reports revealed that about 3920-4660 tons of ENMs are annually used for construction materials in Japan. Nanoscale TiO2, SiO2, Al2O3 and carbon black have already been applied for decades to wall paints, road markings or concrete. The dynamic material flow model indicates that in 2016 about 95% of ENMs, which have been used since their year of market penetration, remained in buildings, whereas only 5% ended up in the Japanese waste management system or were diffusely released into the environment. Considering the current Japanese waste management system, ENMs were predicted to end up in recycled materials (40-47%) or in landfills (36-41%). It was estimated that only a small proportion was used in agriculture (5-7%, as ENM-containing sewage sludges) or was diffusely released into soils, surface waters or the atmosphere (5-19%). The results indicate that ENM release predominantly depend on their specific applications and characteristics. The model also highlights the importance of adequate collection and treatment of ENM-containing wastes. In future, similar dynamic flow models for other countries should consider, inasmuch as available, historical data on ENM production (e.g. like declaration reports that are annually published by relevant public authorities or associations), as such input data is very important regarding data reliability in order to decrease uncertainties and to continuously improve model accuracy. In addition, more environmental monitoring studies that aim at the quantification of ENM release and inadvertent transfer, particularly triggered by waste treatment processes, would be needed in order to validate such models.

Traceability of fluorescent engineered nanomaterials and their fate in complex liquid waste matrices.

The number of products containing engineered nanomaterials (ENMs) has increased due to their high industrial relevance as well as their use in diverse consumer products. At the end of their life cycle ENMs might be released to the environment and therefore concerns arise regarding their environmental impact. In order to track their fate upon disposal, it is crucial to establish methods to trace ENMs in complex environmental samples and to differentiate them from naturally-occurring nanoparticles. The goal of this study was to distinctively trace ENMs by (non-invasive) detection methods. For this, fluorescent ENMs, namely quantum dots (QDs), were distinctively traced in complex aqueous matrices, and were still detectable after a period of two months using fluorescence spectroscopy. In particular, two water-dispersible QD-species, namely CdTe/CdS QDs with N-acetyl-l-cysteine as capping agent (NAC-QDs) and surfactant-stabilized CdSe/ZnS QDs (Brij(®)58-QDs), were synthesized to examine their environmental fate during disposal as well as their potential interaction with naturally-occurring substances present in landfill leachates. When QDs were spiked into a leachate from an old landfill site, alteration processes, such as sorption, aggregation, agglomeration, and interactions with dissolved organic carbon (DOC), led to modifications of the optical properties of QDs. The spectral signatures of NAC-QDs deteriorated depending on residence time and storage temperature, while Brij(®)58-QDs retained their photoluminescence fingerprints, indicating their high colloidal stability. The observed change in photoluminescence intensity was mainly caused by DOC-interaction and association with complexing agents, such as fulvic or humic acids, typically present in mature landfill leachates. For both QD-species, the results also indicated that pH of the leachate had no significant impact on their optical properties. As a result, the unique spectroscopic fingerprints of QDs, specifically surfactant-stabilized QDs, allowed distinctive tracing in complex aqueous waste matrices in order to study their long-term behavior and ultimate fate.

Flows of engineered nanomaterials through the recycling process in Switzerland.

The use of engineered nanomaterials (ENMs) in diverse applications has increased during the last years and this will likely continue in the near future. As the number of applications increase, more and more waste with nanomaterials will be generated. A portion of this waste will enter the recycling system, for example, in electronic products, textiles and construction materials. The fate of these materials during and after the waste management and recycling operations is poorly understood. The aim of this work is to model the flows of nano-TiO2, nano-ZnO, nano-Ag and CNT in the recycling system in Switzerland. The basis for this study is published information on the ENMs flows on the Swiss system. We developed a method to assess their flow after recycling. To incorporate the uncertainties inherent to the limited information available, we applied a probabilistic material flow analysis approach. The results show that the recycling processes does not result in significant further propagation of nanomaterials into new products. Instead, the largest proportion will flow as waste that can subsequently be properly handled in incineration plants or landfills. Smaller fractions of ENMs will be eliminated or end up in materials that are sent abroad to undergo further recovery processes. Only a reduced amount of ENMs will flow back to the productive process of the economy in a limited number of sectors. Overall, the results suggest that risk assessment during recycling should focus on occupational exposure, release of ENMs in landfills and incineration plants, and toxicity assessment in a small number of recycled inputs.

Current limitations and challenges in nanowaste detection, characterisation and monitoring.

Engineered nanomaterials (ENMs) are already extensively used in diverse consumer products. Along the life cycle of a nano-enabled product, ENMs can be released and subsequently accumulate in the environment. Material flow models also indicate that a variety of ENMs may accumulate in waste streams. Therefore, a new type of waste, so-called nanowaste, is generated when end-of-life ENMs and nano-enabled products are disposed of. In terms of the precautionary principle, environmental monitoring of end-of-life ENMs is crucial to allow assessment of the potential impact of nanowaste on our ecosystem. Trace analysis and quantification of nanoparticulate species is very challenging because of the variety of ENM types that are used in products and low concentrations of nanowaste expected in complex environmental media. In the framework of this paper, challenges in nanowaste characterisation and appropriate analytical techniques which can be applied to nanowaste analysis are summarised. Recent case studies focussing on the characterisation of ENMs in waste streams are discussed. Most studies aim to investigate the fate of nanowaste during incineration, particularly considering aerosol measurements; whereas, detailed studies focusing on the potential release of nanowaste during waste recycling processes are currently not available. In terms of suitable analytical methods, separation techniques coupled to spectrometry-based methods are promising tools to detect nanowaste and determine particle size distribution in liquid waste samples. Standardised leaching protocols can be applied to generate soluble fractions stemming from solid wastes, while micro- and ultrafiltration can be used to enrich nanoparticulate species. Imaging techniques combined with X-ray-based methods are powerful tools for determining particle size, morphology and screening elemental composition. However, quantification of nanowaste is currently hampered due to the problem to differentiate engineered from naturally-occurring nanoparticles. A promising approach to face these challenges in nanowaste characterisation might be the application of nanotracers with unique optical properties, elemental or isotopic fingerprints. At present, there is also a need to develop and standardise analytical protocols regarding nanowaste sampling, separation and quantification. In general, more experimental studies are needed to examine the fate and transport of ENMs in waste streams and to deduce transfer coefficients, respectively to develop reliable material flow models.

Environmental exposure assessment framework for nanoparticles in solid waste.

Information related to the potential environmental exposure of engineered nanomaterials (ENMs) in the solid waste management phase is extremely scarce. In this paper, we define nanowaste as separately collected or collectable waste materials which are or contain ENMs, and we present a five-step framework for the systematic assessment of ENM exposure during nanowaste management. The framework includes deriving EOL nanoproducts and evaluating the physicochemical properties of the nanostructure, matrix properties and nanowaste treatment processes as well as transformation processes and environment releases, eventually leading to a final assessment of potential ENM exposure. The proposed framework was applied to three selected nanoproducts: nanosilver polyester textile, nanoTiO2 sunscreen lotion and carbon nanotube tennis racquets. We found that the potential global environmental exposure of ENMs associated with these three products was an estimated 0.5-143 Mg/year, which can also be characterised qualitatively as medium, medium, low, respectively. Specific challenges remain and should be subject to further research: (1) analytical techniques for the characterisation of nanowaste and its transformation during waste treatment processes, (2) mechanisms for the release of ENMs, (3) the quantification of nanowaste amounts at the regional scale, (4) a definition of acceptable limit values for exposure to ENMs from nanowaste and (5) the reporting of nanowaste generation data.

Review and prospect of emerging contaminants in waste--key issues and challenges linked to their presence in waste treatment schemes: general aspects and focus on nanoparticles.

The presence in waste of emerging pollutants (EPs), whose behaviours and effects are not well understood, may present unexpected health and environmental risks and risks for the treatment processes themselves. EP may include substances that are newly detected in the environment, substances already identified as risky and whose use in items is prohibited (but which may be present in old or imported product waste) or substances already known but whose recent use in products can cause problems during their future treatment as waste. Several scientific studies have been conducted to assess the presence of EP in waste, but they are mostly dedicated to a single category of substance or one particular waste treatment. In the absence of a comprehensive review focused on the impact of the presence of EP on waste treatment schemes, the authors present a review of the key issues associated with the treatment of waste containing emerging pollutants. This review presents the typologies of emerging pollutants that are potentially present in waste along with the major challenges for each treatment scheme (recycling, composting, digestion, incineration, landfilling and wastewater treatment). All conventional treatment processes are affected by these new pollutants, and they were almost never originally designed to consider these substances. In addition to these general aspects, a comprehensive review of available data, projects and future R&D needs related to the impact of nanoparticles on waste treatment is presented as a case study.