Colorimetric Detection of HER2-Overexpressing-Cancer-Derived Exosomes in Mouse Urine Using Magnetic-Polydiacetylene Nanoparticles.

Breast cancer (BC) is a major global health problem, with ≈20-25% of patients overexpressing human epidermal growth factor receptor 2 (HER2), an aggressive marker, yet access to early detection and treatment varies across countries. A low-cost, equipment-free, and easy-to-use polydiacetylene (PDA)-based colorimetric sensor is developed for HER2-overexpressing cancer detection, designed for use in low- and middle-income countries (LMICs). PDA nanoparticles are first prepared through thin-film hydration. Subsequently, hydrophilic magnetic nanoparticles and HER2 antibodies are sequentially conjugated to them. The synthesized HER2-MPDA can be concentrated and separated by a magnetic field while inheriting the optical characteristics of PDA. The specific binding of HER2 antibody in HER2-MPDA to HER2 receptor in HER2-overexpressing exosomes causes a blue-to-red color change by altering the molecular structure of the PDA backbone. This colorimetric sensor can simultaneously separate and detect HER2-overexpressing exosomes. HER2-MPDA can detect HER2-overexpressing exosomes in the culture medium of HER2-overexpressing BC cells and in mouse urine samples from a HER2-overexpressing BC mouse model. It can selectively isolate and detect only HER2-overexpressing exosomes through magnetic separation, and its detection limit is found to be 8.5 × 108 particles mL-1. This colorimetric sensor can be used for point-of-care diagnosis of HER2-overexpressing BC in LMICs.

A Biodegradable, Porous Flier Inspired by a Parachute-Like Tragopogon Fruit for Environmental Preservation.

New devices inspired by flying seeds, or more technically by fruits with dispersal units, could have a significant impact for environmental monitoring and aerial seeding. Among the various types of dispersal units (e.g., winged, gliding), parachuted or plumed units offer the lowest vertical descent speed (i.e., 0.3-0.7 m s-1), making them an appealing solution for wind-driven distribution over large areas. Here, a biodegradable and porous parachute flier based on cellulose acetate, inspired by a Tragopogon pratensis fruit is presented. A micrometric-thick pappus is 3D printed and integrated with a porous colorimetric indicator or a porous beak, with micrometric pores, fabricated through injection molding and leaching techniques. Thanks to the bioinspired design and the lightweight porous structure, the artificial Tragopogon mimics the aerodynamics and descent speed of the natural species. Its feasibility is demonstrated in aerial seeding by integrating the beak with a mustard seed (as a model), and in environmental monitoring by coupling it with colorimetric indicators for rain pH and nitrate levels in soils. The proposed flier represents a significant advancement as it is the first parachute-like biodegradable solution, seamlessly integrated into natural ecosystems, thus contributing to moving a step forward in artificial solutions with zero impact.

Chemical sensors for the early diagnosis of bacterial resistance to ß-lactam antibiotics.

ß-Lactamases are bacterial enzymes that inactivate ß-lactam antibiotics and, as such, are the most prevalent cause of antibiotic resistance in Gram-negative bacteria. The ever-increasing production and worldwide dissemination of bacterial strains producing carbapenemases is currently a global health concern. These enzymes catalyze the hydrolysis of carbapenems - the ß-lactam antibiotics with the broadest spectrum of activity that are often considered as drugs of last resort. The incidence of carbapenem-resistant pathogens such as Pseudomonas aeruginosa, Acinetobacter baumannii and carbapenemase or extended spectrum beta-lactamase (ESBL)-producing Enterobacterales, which are frequent in clinical settings, is worrisome since, in some cases, no therapies are available. These include all metallo-ß-lactamases (VIM, IMP, NDM, SMP, and L1), and serine-carbapenemases of classes A (KPC, SME, IMI, and GES), and of classes D (OXA-23, OXA-24/40, OXA-48 and OXA-58). Consequently, the early diagnosis of bacterial strains harboring carbapenemases is a pivotal task in clinical microbiology in order to track antibiotic bacterial resistance and to improve the worldwide management of infectious diseases. Recent research efforts on the development of chromogenic and fluorescent chemical sensors for the specific and sensitive detection and quantification of ß-lactamase production in multidrug-resistant pathogens are summarized herein. Studies to circumvent the main limitations of the phenotypic and molecular methods are discussed. Recently reported chromogenic and fluorogenic cephalosporin- and carbapenem-based ß-lactamase substrates will be reviewed as alternative options to the currently available nitrocefin and related compounds, a chromogenic cephalosporin-based reagent widely used in clinical microbiology laboratories. The scope of these new chemical sensors, along with the synthetic approaches to synthesize them, is also summarized.

Nanostructured transition metal dichalcogenides-based colorimetric sensors: Synthesis, characterization, and emerging applications.

Nanostructured transition metal dichalcogenides (TMDCs) have garnered significant attention as prospective materials for the development of highly sensitive and versatile colorimetric sensors. This work explores the synthesis, characterization, and emerging applications of TMDC-based sensors, focusing on their unique structural aspects and inherent properties. The synthesis methods involve tailored fabrication techniques, such as chemical vapor deposition and hydrothermal processes, aimed at producing well-defined nanostructures that enhance sensor performance. Characterization techniques, including microscopy, spectroscopy, and surface analysis, are employed to elucidate the structural and chemical features of the nanostructured TMDCs. These analyses provide insights into the correlation between the material's morphology and its sensing capabilities. The colorimetric sensing mechanism relies on the modulation of optical properties in response to specific analytes, enabling rapid and visual detection. The emerging applications of TMDC-based colorimetric sensors span diverse fields, including environmental monitoring, healthcare, and industrial processes. The sensors exhibit high sensitivity, selectivity, and real-time response, making them ideal candidates for detecting various target analytes. Furthermore, their integration with complementary technologies such as microfluidics, can facilitate the development of on-site and point-of-care applications. This work highlights the interdisciplinary significance of nanostructured TMDC-based colorimetric sensors and underscores their potential contributions to addressing contemporary challenges in sensing technology.

Silicas with Covalently Anchored Fluorosolvatochromic Dyes Suitable for Naked-Eye Detection of Colourless Compounds.

In this work, two stilbene derivatives with different substituents on the phenolic core (phenyl and dimethoxyphenyl) were prepared. The fluorosolvatochromic response of their N-propylated derivatives was studied in a solution of twelve different solvents using UV-Vis absorption and fluorescence emission spectra. Both stilbazolium dyes showed a significant negative solvatochromic effect, with a hypsochromic shift in the visible absorption band of approximately 232 nm and 265 nm for phenyl and the dimethoxyphenyl derivative, respectively, when the solvent was changed from water to pyridine. The stilbene derivatives were subsequently N-alkylated with (3-iodopropyl)trimethoxysilane and covalently anchored to the silica surface. The fluorosolvatochromic response of the prepared silicas compared to N-propylated dyes was then evaluated colorimetrically under daylight and UV illumination. The fluorosolvatochromic behaviour of the anchored dyes was preserved on the silica surface; therefore, the modified silicas could be used for the visual detection of colourless liquids.

Hydrogen Bonding Parameters by Rapid Colorimetric Assessment: Evaluation of Structural Components Found in Biological Ligands and Organocatalysts.

Hydrogen bonding is a key molecular interaction in biological processes, drug delivery, and catalysis. This report describes a high throughput UV-Vis spectroscopic method to measure hydrogen bonding capacity using a pyrazinone sensor. This colormetric sensor reversibly binds to a hydrogen bond donor, resulting in a blue shift as additional equivalents of donor are added. Titration with excess equivalents of donor is used to determine the binding coefficient, ln(Keq ). Over 100 titrations were performed for a variety of biologically relevant compounds. This data enabled development a multiple linear regression model that is capable of predicting 95 % of ln(Keq ) values within 1 unit, allowing for the estimation of hydrogen bonding affinity from a single measurement. To show the effectiveness of the single point measurements, hydrogen bond strengths were obtained for a set of carboxylic acid bioisosteres. The values from the single point measurements were validated with full titrations.

Chemometric-Assisted Litmus Test: One Single Sensing Platform Adapted from 1-13 to Narrow pH Ranges.

A novel 3 × 4 colorimetric sensing platform, named the chemometric-assisted litmus test (CLT), has been developed by covalently anchoring commercial pH indicators to ethylene vinyl alcohol (EVOH). The proposed device can be exploited for pH determinations in a wide range from 1 to 13 and in specific narrow ranges, achieving sufficient accuracy and errors below 0.5 pH units. The experimental procedure is simple, quick and reliable; equilibration is reached in less than 2 h, CLT pictures are acquired by a camera, and data treatment is performed applying chemometric techniques such as principal component analysis (PCA) and partial least square regression (PLS) to RGB indices.

Tectomer-Mediated Optical Nanosensors for Tyramine Determination.

The development of optical sensors for in situ testing has become of great interest in the rapid diagnostics industry. We report here the development of simple, low-cost optical nanosensors for the semi-quantitative detection or naked-eye detection of tyramine (a biogenic amine whose production is commonly associated with food spoilage) when coupled to Au(III)/tectomer films deposited on polylactic acid (PLA) supports. Tectomers are two-dimensional oligoglycine self-assemblies, whose terminal amino groups enable both the immobilization of Au(III) and its adhesion to PLA. Upon exposure to tyramine, a non-enzymatic redox reaction takes place in which Au(III) in the tectomer matrix is reduced by tyramine to gold nanoparticles, whose reddish-purple color depends on the tyramine concentration and can be identified by measuring the RGB coordinates (Red-Green-Blue coordinates) using a smartphone color recognition app. Moreover, a more accurate quantification of tyramine in the range from 0.048 to 10 µM could be performed by measuring the reflectance of the sensing layers and the absorbance of the characteristic 550 nm plasmon band of the gold nanoparticles. The relative standard deviation (RSD) of the method was 4.2% (n = 5) with a limit of detection (LOD) of 0.014 µM. A remarkable selectivity was achieved for tyramine detection in the presence of other biogenic amines, especially histamine. This methodology, based on the optical properties of Au(III)/tectomer hybrid coatings, is promising for its application in food quality control and smart food packaging.

Colorimetric Paper-Based Analytical Devices (PADs) Backed by Chemometrics for Pd(II) Detection.

This paper presents the development of cheap and selective Paper-based Analytical Devices (PADs) for selective Pd(II) determination from very acidic aqueous solutions. The PADs were obtained by impregnating two cm-side squares of filter paper with an azoic ligand, (2-(tetrazolylazo)-1,8 dihydroxy naphthalene-3,6,-disulphonic acid), termed TazoC. The so-obtained orange TazoC-PADs interact quickly with Pd(II) in aqueous solutions by forming a complex purple-blue-colored already at pH lower than 2. The dye complexes no other metal ions at such an acidic media, making TazoC-PADs highly selective to Pd(II) detection. Besides, at higher pH values, other cations, for example, Cu(II) and Ni(II), can interact with TazoC through the formation of stable and pink-magenta-colored complexes; however, it is possible to quantify Pd(II) in the presence of other cations using a multivariate approach. To this end, UV-vis spectra of the TazoC-PADs after equilibration with the metal ions solutions were registered in the 300-800 nm wavelength range. By applying Partial Least Square regression (PLS), the whole UV-vis spectra of the TazoC-PADs were related to the Pd(II) concentrations both when present alone in solution and also in the presence of Cu(II) and Ni(II). Tailored PLS models obtained with matrix-matched standard solutions correctly predicted Pd(II) concentrations in unknown samples and tap water spiked with the metal cation, making the method promising for quick and economical sensing of Pd(II).

A Colorimetric Membrane-Based Sensor with Improved Selectivity towards Amphetamine.

Due to their simplicity, speed and low cost, chemical spot tests are increasingly demanded for the presumptive identification of illicit drugs in a variety of contexts such as point-of-care assistance or prosecution of drug trafficking. However, most of the colorimetric reactions used in these tests are, at best, drug class selective. Therefore, the development of tests based on chemical reactions with improved discrimination power is of great interest. In this work, we propose a new colorimetric assay for amphetamine (AMP) based on its reaction with solutions of alkaline gold bromide to form an insoluble yellow-orange derivative. The resulting suspensions are then filtered onto nylon membranes and the precipitate collected is used for the visual identification of AMP. The measurement of the absorbance of the membranes by diffuse reflectance spectroscopy also allows the quantification of AMP in a simple and rapid way, as demonstrated for different synthetic and drug street samples. On the basis of the results obtained, it was concluded that the proposed procedure is highly selective towards AMP, as this compound could be easily differentiated from other common drugs such as methamphetamine (MET), ephedrine (EPH), scopolamine (SCP) and cocaine (COC).

Carbazole-Based Colorimetric Anion Sensors.

Owing to their strong carbazole chromophore and fluorophore, as well as to their powerful and convergent hydrogen bond donors, 1,8-diaminocarbazoles are amongst the most attractive and synthetically versatile building blocks for the construction of anion receptors, sensors, and transporters. Aiming to develop carbazole-based colorimetric anion sensors, herein we describe the synthesis of 1,8-diaminocarbazoles substituted with strongly electron-withdrawing substituents, i.e., 3,6-dicyano and 3,6-dinitro. Both of these precursors were subsequently converted into model diamide receptors. Anion binding studies revealed that the new receptors exhibited significantly enhanced anion affinities, but also significantly increased acidities. We also found that rear substitution of 1,8-diamidocarbazole with two nitro groups shifted its absorption spectrum into the visible region and converted the receptor into a colorimetric anion sensor. The new sensor displayed vivid color and fluorescence changes upon addition of basic anions in wet dimethyl sulfoxide, but it was poorly selective; because of its enhanced acidity, the dominant receptor-anion interaction for most anions was proton transfer and, accordingly, similar changes in color were observed for all basic anions. The highly acidic and strongly binding receptors developed in this study may be applicable in organocatalysis or in pH-switchable anion transport through lipophilic membranes.

A PNA-DNA2 Triple-Helix Molecular Switch-Based Colorimetric Sensor for Sensitive and Specific Detection of microRNAs from Cancer Cells.

Peptide nucleic acids (PNAs), the synthetic DNA mimics that can bind to oligonucleotides to form duplexes, triplexes, and quadruplexes, could be advantageous as probes for nucleic acid sequences owing to their unique physicochemical and biochemical properties. We have found that a homopurine PNA strand could bind to two homopyrimidine DNA strands to form a PNA-DNA2 triplex. Moreover, the cyanine dye DiSC2 (5) could bind with high affinity to this triplex and cause a noticeable color change. On the basis of this phenomenon, we have designed a label-free colorimetric sensing platform for miRNAs from cancer cells by using a PNA-DNA2 triple-helix molecular switch (THMS) and DiSC2 (5). This sensing platform can detect miRNA-21 specifically with a detection limit of 0.18 nM, which is comparable to that of the THMS-mediated fluorescence sensing platform. Moreover, this colorimetric platform does not involve any chemical modification or enzymatic signal amplification, which boosts its applicability and availability at the point of care in resource-limited settings. The universality of this approach can be simply achieved by altering the sequences of the probe DNA for specific targets.

Iron doped graphitic carbon nitride with peroxidase like activity for colorimetric detection of sarcosine and hydrogen peroxide.

The successful synthesis is reported of Mn, Fe, Co, Ni, Cu-doped g-C3N4 nanoflakes via a simple one-step pyrolysis method, respectively. Among them, the Fe-doped g-C3N4 nanoflakes exhibited the highest peroxidase-like activity, which can be used for colorimetric detection of hydrogen peroxide (H2O2) and sarcosine (SA), within the detection ranges of 2-100 µM and 10-500 µM and detection limits of 1.8 µM and 8.6 µM, respectively. The catalytic mechanism of the Fe-doped g-C3N4 nanoflake was also explored and verified the generation of hydroxyl radical (•OH) through fluorescence method. It is believed that the Fe-doped g-C3N4 nanoflakes as enzyme mimics will greatly promote the practical applications in a variety of fields in the future including biomedical science, environmental governance, antibacterial agent, and bioimaging due to their extraordinary catalytic performance and stability. Graphical abstract.

pH Colorimetric Sensor Arrays: Role of the Color Space Adopted for the Calculation of the Prediction Error.

A pH colorimetric sensor array was prepared and characterized by combining tetrabromophenol blue (TBB) and bromothymol blue (BB) embedded in organically modified silicate (OrMoSil) spots polyvinylidene fluoride (PVDF)-supported. The signal was based on the Hue profile (H). The individual calibrations of TBB and BB showed precisions with minimum values of 0.012 pH units at pH = 2.196 for TBB and 0.018 at pH = 6.692 for BB. The overall precision of 10 spots of the mixture TBB/BB increased in the pH range of 1.000-8.000 from a minimum value of pH precision of 0.009 at pH = 2.196 to 0.012 at pH = 6.692, with the worst value of 0.279 pH units at pH = 4.101. The possibility to produce an array with much more than 10 spots allows for improving precision. The H analytical performance was compared to those of other color spaces such as RGB, Lab, and XYZ. H was the best one, with prediction error in the range of 0.016 to 0.021 pH units, at least three times lower than the second-best (x coordinate), with 0.064 pH units. These results were also confirmed by the calculation of the main experimental contributions to the pH prediction error, demonstrating the consistency of the proposed calculation approach.

Stimuli-Directed Colorimetric Interconversion of Helical Polymers Accompanied by a Tunable Self-Assembly Process.

Interconversion between extended and bent structures at the pendant groups of a chiral polyene framework [poly(phenylacetylene) with (R)-(2-methoxy-2-phenylacetyl)glycine residues linked to 4-vinylanilines] allows the reversible colorimetric transformation from stretched to compressed helical cis-transoid polyenic structures through manipulation of the flexible spacer. This transformation generates either organogels (stretched helical form) or nanoparticles (compressed helical form) under the control of polar/low polar stimuli respectively and opens the way to the development of new sensors and stimuli-sensitive materials based on these concepts.

Dermal Tattoo Biosensors for Colorimetric Metabolite Detection.

Tattooing is a ubiquitous body modification involving the injection of ink and/or dye pigments into the dermis. Biosensors in the form of tattoos can be used to monitor metabolites in interstitial fluid. Here, minimally invasive, injectable dermal biosensors were developed for measuring pH, glucose, and albumin concentrations. The dermal pH sensor was based on methyl red, bromothymol blue, and phenolphthalein, which responded to a pH range from 5.0 to 9.0. The dermal glucose sensor consisted of glucose oxidase, 3,3',5,5'-tetramethylbenzidine, and peroxidase that detected concentrations up to 50.0 mmol L-1 . The dermal albumin sensor consisted of 3',3'',5',5''-tetrachlorophenol-3,4,5,6-tetrabromosulfophthalein to measure concentrations up to 5.0 g L-1 . The sensors were multiplexed in ex vivo skin tissue and quantitative readouts were obtained using a smartphone camera. These sensors can be used to manage of acid-base homeostasis, diabetes, and liver failure in point-of-care settings.

A novel 4-phenyl amino thiourea derivative designed for real-time ratiometric-colorimetric detection of toxic Pb2.

The objective of this study was to develop a ratiometric and colorimetric organic sensor for Pb2+ detection in environmental samples. A new probe 4-phenyl amino thiourea (PAT) was designed and synthesized using hydrazine hydrate and phenyl isothiocyanate as raw materials. After its structure was characterized and confirmed, its UV-vis spectral property was investigated in detail. PAT possesses a specifically real-time, ratiometric and colorimetric response to Pb2+ in dimethyl formamide (DMF)/H2O (v/v = 9:1, pH = 7.0) within 18.0 s. There was little interference in the presence of some other common metal ions, such as Fe3+, Cd2+, Zn2+, Mg2+, Cr3+, Ca2+, Ba2+, Sn2+, Na+, Mn2+, Hg2+, and Pb2+. Under the optimized conditions (DMF/H2O with v/v of 9:1, cPAT = 1.0 × 10-3 mol·L-1, pH = 7.0), the present sensor PAT was successfully applied for Pb2+ determination in environmental water samples with satisfied recoveries (83.0%-106.0%) and analytical precision (≤7.2%). The recognition mechanism was confirmed to form a stable 1:1 six-member ring complex between the target dye and Pb2+ with a coordination constant of 4.96 × 104.

Plasmonic Metasurfaces Based on Nanopin-Cavity Resonator for Quantitative Colorimetric Ricin Sensing.

In view of the toxic potential of a bioweapon threat, rapid visual recognition and sensing of ricin has been of considerable interest while remaining a challenging task up to date. In this study, a gold nanopin-based colorimetric sensor is developed realizing a multicolor variation for ricin qualitative recognition and analysis. It is revealed that such plasmonic metasurfaces based on nanopin-cavity resonator exhibit reflective color appearance, due to the excitation of standing-wave resonances of narrow bandwidth in visible region. This clear color variation is a consequence of the reflective color mixing defined by different resonant wavelengths. In addition, the colored metasurfaces appear sharp color difference in a narrow refractive index range, which makes them especially well-suited for sensing applications. Therefore, this antibody-functionalized nanopin-cavity biosensor features high sensitivity and fast response, allowing for visual quantitative ricin detection within the range of 10-120 ng mL-1 (0.15 × 10-9 -1.8 × 10-9 m), a limit of detection of 10 ng mL-1 , and the typical measurement time of less than 10 min. The on-chip integration of such nanopin metasurfaces to portable colorimetric microfluidic device may be envisaged for the quantitative studies of a variety of biochemical molecules.

Paper-Based Colorimetric Sensor System for High-Throughput Screening of C-H Borylation.

A paper-based colorimetric sensor system (PBCSS) was developed to detect the amount of bis(pinacolato)diboron (B2 Pin2 ) and applied as a high-throughput screening protocol in Ir-catalyzed C-H borylation. First, 96 ligands were screened for the borylation of benzene, and then 12 of them were selected and tested for five substrates. These reaction mixtures were spotted in the PBCSS, showing a blue-violet color. The value of the gray scale of each reaction was obtained from these colored spots and converted to the extent of conversion of B2 Pin2 . The extents of conversion of B2 Pin2 obtained from the PBCSS showed good correlation with those obtained from gas chromatography analysis. In addition, the modified conversion using blank data showed good correlation with the yield of products.

Colorimetric sensing of selenocystine using gold nanoparticles.

We present a highly selective and sensitive colorimetric method for the detection of selenocystine (SeCys) coexisting with other amino acids, especially cysteine (Cys) using the gold nanoparticles (AuNPs). Firstly, Cys was oxidized to cystine (Cys-Cys) by dissolved oxygen under Cu2+ catalysis in the pre-reaction, which eliminated the interference of Cys in the SeCys sensing process. Then SeCys induced the rapid aggregation of AuNPs through Au-Se bond and complex formation of Cu2+-SeCys in the colorimetric reaction, in which the color change of AuNPs from red to blue or purple with the naked eye detection or with a UV-vis spectrophotometric determination. The concentration of SeCys was quantified by the value at 670 nm from the second-derivative SPR absorbance spectrum. The linear range was from 2 µM to 14 µM with correlation coefficient of 0.999 and a detection limit (LOD) was 0.14 µM. Moreover, the colorimetric response of AuNPs exhibited remarkable specificity to SeCys coexisting with 18 amino acids in a simulation sample, in which the total concentration of Cys and Cys-Cys was less than 15 µM and the each concentration of other 16 common amino acids was 10 µM.