RESUMEN
Oxide semiconductors (OS) are attractive materials for memory and logic device applications owing to their low off-current, high field effect mobility, and superior large-area uniformity. Recently, successful research has reported the high field-effect mobility (µFE) of crystalline OS channel transistors (above 50 cm2 V-1 s-1). However, the memory and logic device application presents challenges in mobility and stability trade-offs. Here, we propose a method for achieving high-mobility and high-stability by lowering the grain boundary effect. A DBADMIn precursor was synthesized to deposit highly c-axis-aligned C(222) crystalline 3 nm thick In2O3 films. In this study, the 250 °C deposited 3 nm thick In2O3 channel transistor exhibited high µFE of 41.12 cm2 V-1 s-1, Vth of -0.50 V, and SS of 150 mV decade-1 with superior stability of 0.16 V positive shift during PBTS at 100 °C, 3 MV cm-1 stress conditions for 3 h.
RESUMEN
We present a novel approach that integrates electrical measurements with molecular dynamics (MD) simulations to assess the activity of type-II restriction endonucleases, specifically EcoRV. Our approach employs a single-walled carbon nanotube field-effect transistor (swCNT-FET) functionalized with the EcoRV substrate DNA, enabling the detection of enzymatic cleavage events. Notably, we leveraged the methylene blue (MB) tag as an "orientation guide" to immobilize the EcoRV substrate DNA in a specific direction, thereby enhancing the proximity of the DNA cleavage reaction to the swCNT surface and consequently improving the sensitivity in EcoRV detection. We conducted computational modeling to compare the conformations and electrostatic potential (ESP) of MB-tagged DNA with its MB-free counterpart, providing strong support for our electrical measurements. Both conformational and ESP simulations exhibited robust agreement with our experimental data. The inhibitory efficacy of the EcoRV inhibitor aurintricarboxylic acid (ATA) was also evaluated, and the selectivity of the sensing device was examined.
Asunto(s)
ADN , Desoxirribonucleasas de Localización Especificada Tipo II , Desoxirribonucleasas de Localización Especificada Tipo II/química , Desoxirribonucleasas de Localización Especificada Tipo II/genética , Sondas de ADNRESUMEN
Tungsten oxide (WO3) doped indium oxide (IWO) field-effect transistors (FET), synthesized using atomic layer deposition (ALD) for three-dimensional integration and back-end-of-line (BEOL) compatibility, are demonstrated. Low-concentration (1â¼4 W atom %) WO3-doping in In2O3 films is achieved by adjusting cycle ratios of the indium and tungsten precursors with the oxidant coreactant. Such doping suppresses oxygen deficiency from In2O2.5 to In2O3 stoichiometry with only 1 atom % W, allowing devices to turn off stably and enhancing threshold voltage stability. The ALD IWO FETs exhibit superior performance, including a low subthreshold slope of 67 mV/decade and negligible hysteresis. Strong tunability of the threshold voltage (Vth) is achieved through W concentration tuning, with 2 atom % IWO FETs showing an optimized Vth for enhancement-mode and a high drain current. ALD IWO FETs have remarkable stability under bias stress and nearly ideal performance extending to sub-100 nm channel lengths, making them promising candidates for high-performance monolithic 3D integrated devices.
RESUMEN
The ultimate sensitivity of field-effect-transistor (FET)-based devices for ionic species detection is of great interest, given that such devices are capable of monitoring single-electron-level modulations. It is shown here, from both theoretical and experimental perspectives, that for such ultimate limits to be approached the thermodynamic as well as kinetic characteristics of the (FET surface)-(linker)-(ion-receptor) ensemble must be considered. The sensitivity was probed in terms of optimal packing of the ensemble, through a minimal charge state/capacitance point of view and atomic force microscopy. Through the fine-tuning of the linker and receptor interaction with the sensing surface, a record limit of detection as well as specificity in the femtomolar range, orders of magnitude better than previously obtained and in excellent accord with prediction, was observed.
RESUMEN
We develop a novel metal contact approach using an antimony (Sb)-platinum (Pt) bilayer to mitigate Fermi-level pinning in 2D transition metal dichalcogenide channels. This strategy allows for control over the transport polarity in monolayer WSe2 devices. By adjustment of the Sb interfacial layer thickness from 10 to 30 nm, the effective work function of the contact/WSe2 interface can be tuned from 4.42 eV (p-type) to 4.19 eV (n-type), enabling selectable n-/p-FET operation in enhancement mode. The shift in effective work function is linked to Sb-Se bond formation and an emerging n-doping effect. This work demonstrates high-performance n- and p-FETs with a single WSe2 channel through Sb-Pt contact modulation. After oxide encapsulation, the maximum current density at |VD| = 1 V reaches 170 µA/µm for p-FET and 165 µA/µm for n-FET. This approach shows promise for cost-effective CMOS transistor applications using a single channel material and metal contact scheme.
RESUMEN
The opioid overdose crisis is a global health challenge. Fentanyl, an exceedingly potent synthetic opioid, has emerged as a leading contributor to the surge in opioid-related overdose deaths. The surge in overdose fatalities, particularly due to illicitly manufactured fentanyl and its contamination of street drugs, emphasizes the urgency for drug-testing technologies that can quickly and accurately identify fentanyl from other drugs and quantify trace amounts of fentanyl. In this paper, gold nanoparticle (AuNP)-decorated single-walled carbon nanotube (SWCNT)-based field-effect transistors (FETs) are utilized for machine learning-assisted identification of fentanyl from codeine, hydrocodone, and morphine. The unique sensing performance of fentanyl led to use machine learning approaches for accurate identification of fentanyl. Employing linear discriminant analysis (LDA) with a leave-one-out cross-validation approach, a validation accuracy of 91.2% is achieved. Meanwhile, density functional theory (DFT) calculations reveal the factors that contributed to the enhanced sensitivity of the Au-SWCNT FET sensor toward fentanyl as well as the underlying sensing mechanism. Finally, fentanyl antibodies are introduced to the Au-SWCNT FET sensor as specific receptors, expanding the linear range of the sensor in the lower concentration range, and enabling ultrasensitive detection of fentanyl with a limit of detection at 10.8 fg mL-1.
RESUMEN
Aligned carbon nanotube (A-CNT) with high semiconducting purity and high-density have been considered as one of the most promising active channels for field-effect transistors (FETs), but conjugated polymer dispersant residues on the surface of A-CNT have become the main obstacle for its further development in electronics applications. In this work, a series of removable conjugated polymers (CPs) are designed and synthesized to achieve favorable purification and alignment for CNT arrays with a high density of ≈360 CNTs/µm. Furthermore, a removal process of CPs on the CNT array film is developed. Raman spectra show that the CNTs in array film are almost not damaged after the removal process, and the G/D ratio is as high as 35. The field-effect transistors (FETs) are fabricated with a saturation current density up to 600 µA µm-1 and a current on-off ratio of ≈105, even with a relatively long channel length of ≈3 µm.
RESUMEN
Fullerene (C60) crystals have attracted considerable attention in the field of optoelectronic devices owing to their excellent performance as n-type semiconductor material. However, a challenge still remains unbeaten as to the continuous crystallization of non-solvated C60 single-crystal films with high coverage and uniform alignment using low-cost solution techniques. Here, a facile bar coating method is used to prepare ribbon-shaped non-solvated C60 crystals with a large area (up to centimeters) and high coverage (>95%) by precisely controlling the crystallization process from specific solvents. Benefiting from the non-solvated crystalline structure, well-distributed thickness, uniform morphological alignment, and crystallographic orientation, organic field-effect transistors fabricated from the C60 single-crystal films exhibit a high average electron mobility of 2.28 cm2 V-1s-1, along with the coefficient of variance (CV) as small as 13.6%. This efficient manufacturing method will lay a strong foundation for C60 single-crystal films to fit into the future high-performance integrated optoelectronic application.
RESUMEN
2D materials (2DMs), known for their atomically ultrathin structure, exhibit remarkable electrical and optical properties. Similarly, molecular self-assembled monolayers (SAMs) with comparable atomic thickness show an abundance of designable structures and properties. The strategy of constructing electronic devices through unique heterostructures formed by van der Waals assembly between 2DMs and molecular SAMs not only enables device miniaturization, but also allows for convenient adjustment of their structures and functions. In this review, the fundamental structures and fabrication methods of three different types of electronic devices dominated by 2DM-SAM heterojunctions with varying architectures are timely elaborated. Based on these heterojunctions, their fundamental functionalities and characteristics, as well as the regulation of their performance by external stimuli, are further discussed.
RESUMEN
Electrolyte-gated transistors have strong potential for high-performance artificial synapses in neuromorphic bio-interfaces owing to their outstanding synaptic characteristics, low power consumption, and human-like mechanisms. However, the short retention time is a hurdle to overcome owing to the natural diffusion of protons. Here, a novel modulation technique of ionic conductivity is proposed with yttria-stabilized hafnia for the first time to enhance the retention characteristic of a solid-state electrolyte-gated transistor-based artificial synapse. With the optimization of the ionic conductivity in yttria-stabilized hafnia, a high retention time of over 300 s and remarkable synaptic characteristics are accomplished by regulating channel conductance with precise modulation of the strength of the proton-electron coupling intensity along the input signals. Furthermore, pattern recognition simulation is conducted based on the measured synaptic characteristics, exhibiting 94.41% of operation accuracy, which implies a promising solution for neuromorphic in-memory computing systems with a high operation accuracy and low power consumption.
RESUMEN
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDCs) are extensively employed as channel materials in advanced electronic devices. The electrical contacts between electrodes and 2D semiconductors play a crucial role in the development of high-performance transistors. While numerous strategies for electrode interface engineering have been proposed to enhance the performance of n-type 2D transistors, upgrading p-type ones in a similar manner remains a challenge. In this work, significant improvements in a p-type WSe2 transistor are demonstrated by utilizing metallic MoO2 nanosheets as the electrode contact, which are controllably fabricated through physical vapor deposition and subsequent annealing. The MoO2 nanosheets exhibit an exceptional electrical conductivity of 8.4 × 104 S mâ1 and a breakdown current density of 3.3 × 106 A cmâ2. The work function of MoO2 nanosheets is determined to be ≈5.1 eV, making them suitable for contacting p-type 2D semiconductors. Employing MoO2 nanosheets as the electrode contact in WSe2 transistors results in a notable increase in the field-effect mobility to 92.0 cm2 Vâ1 sâ1, which is one order of magnitude higher than the counterpart devices with conventional electrodes. This study not only introduces an intriguing 2D metal oxide to improve the electrical contact in p-type 2D transistors, but also offers an effective approach to fabricating all-2D devices.
RESUMEN
Bismuth sulfide (Bi2S3) exhibits a direct energy bandgap and an exceptional optical absorption capability over a broadband radiation, thus presents a novel class of 2D photodetector material. The field effect transistor (FET) photodetector device is fabricated from 2D Bi2S3. An anomalous variation in the transport characteristics of 2D Bi2S3 is observed with the variation in temperature. The electrical resistance reduces by 99.26% at 10 K compared to the response at 300 K. Defects due to the bismuth and sulfur vacancies play a critical role in the dramatic behavior, which is confirmed using photoluminescence, time-resolved photoluminescence, Hall measurements, and energy dispersive X-ray spectroscopy. The density functional theory calculations provide a significant insight into the thermodynamic properties of intrinsic defects in Bi2S3. Moreover, the effect of gate bias on responsivity additionally confirms its invariance at low temperature. The Bi2S3 based FET photodetector achieves ultrahigh responsivity in the order of ≈106 A W-1 and detectivity of ≈1014 Jones. Moreover, the external quantum efficiency of ≈107% is measured in a wide spectrum of optical illumination (532 to 1064 nm) with a noise-equivalent power of 3.5 × 10-18 W/âHz at a bias of 0.2 V. The extraordinary performance of Bi2S3 photodetector outstands 2D photodetectors.
RESUMEN
Inspired by the previous machine-learning study that the number of hydrogen-bonding acceptor (NHBA) is important index for the hole mobility of organic semiconductors, seven dithienobenzothiazole (DBT) derivatives 1a-g (NHBA = 5) were designed and synthesized by one-step functionalization from a common precursor. X-ray single-crystal structural analyses confirmed that the molecular arrangements of 1b (the diethyl and ethylthienyl derivative) and 1c (the di(n-propyl) and n-propylthienyl derivative) in the crystal are classified into brickwork structures with multidirectional intermolecular charge-transfer integrals, as a result of incorporation of multiple hydrogen-bond acceptors. The solution-processed top-gate bottom-contact devices of 1b and 1c had hole mobilities of 0.16 and 0.029 cm2 V-1s-1, respectively.
RESUMEN
Numerous efforts have been undertaken to mitigate the Debye screening effect of FET biosensors for achieving higher sensitivity. There are few reports that show sub-femtomolar detection of biomolecules by FET mechanisms but they either suffer from significant background noise or lack robust control. In this aspect, deformed/crumpled graphene has been recently deployed by other researchers for various biomolecule detection like DNA, COVID-19 spike proteins and immunity markers like IL-6 at sub-femtomolar levels. However, the chemical vapor deposition (CVD) approach for graphene fabrication suffers from various surface contamination while the transfer process induces structural defects. In this paper, an alternative fabrication methodology has been proposed where glass substrate has been initially texturized by wet chemical etching through the sacrificial layer of synthesized silver nanoparticles, obtained by annealing of thin silver films leading to solid state dewetting. Graphene has been subsequently deposited by thermal reduction technique from graphene oxide solution. The resulting deformed graphene structure exhibits higher sensor response towards glial fibrillary acidic protein (GFAP) detection with respect to flat graphene owing to the combined effect of reduced Debye screening and higher surface area for receptor immobilization. Additionally, another interesting aspect of the reported work lies in the biomolecule capture by dielectrophoretic (DEP) transport on the crests of the convex surfaces of graphene in a coplanar gated topology structure which has resulted in 10 aM and 28 aM detection limits of GFAP in buffer and undiluted plasma respectively, within 15 min of application of analyte. The detection limit in buffer is almost four decades lower than that documented for GFAP using biosensors which is is expected to pave way for advancing graphene FET based sensors towards ultrasensitive point-of-care diagnosis of GFAP, a biomarker for traumatic brain injury.
Asunto(s)
Técnicas Biosensibles , Proteína Ácida Fibrilar de la Glía , Grafito , Humanos , Técnicas Biosensibles/métodos , Electroforesis/métodos , Vidrio/química , Proteína Ácida Fibrilar de la Glía/análisis , Grafito/química , Límite de Detección , Nanopartículas del Metal/química , Plata/química , Transistores ElectrónicosRESUMEN
Achieving energy-efficient and high-performance field-effect transistors (FETs) is one of the most important goals for future electronic devices. This paper reports semiconducting single-walled carbon nanotube FETs (s-SWNT-FETs) with an optimized high-krelaxor ferroelectric insulator P(VDF-TrFE-CFE) thickness for low-voltage operation. The s-SWNT-FETs with an optimized thickness (â¼800 nm) of the high-kinsulator exhibited the highest average mobility of 14.4 cm2V-1s-1at the drain voltage (ID) of 1 V, with a high current on/off ratio (Ion/off>105). The optimized device performance resulted from the suppressed gate leakage current (IG) and a sufficiently large capacitance (>50 nF cm-2) of the insulating layer. Despite the extremely high capacitance (>100 nF cm-2) of the insulating layer, an insufficient thickness (<450 nm) induces a highIG, leading to reducedIDand mobility of s-SWNT-FETs. Conversely, an overly thick insulator (>1200 nm) cannot introduce sufficient capacitance, resulting in limited device performance. The large capacitance and sufficient breakdown voltage of the insulating layer with an appropriate thickness significantly improved p-type performance. However, a reduced n-type performance was observed owing to the increased electron trap density caused by fluorine proportional to the insulator thickness. Hence, precise control of the insulator thickness is crucial for achieving low-voltage operation with enhanced s-SWNT-FET performance.
RESUMEN
The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), etiological agent for the coronavirus disease 2019 (COVID-19), has resulted in over 775 million global infections. Early diagnosis remains pivotal for effective epidemiological surveillance despite the availability of vaccines. Antigen-based assays are advantageous for early COVID-19 detection due to their simplicity, cost-effectiveness, and suitability for point-of-care testing (PoCT). This study introduces a graphene field-effect transistor-based biosensor designed for high sensitivity and rapid response to the SARS-CoV-2 spike protein. By functionalizing graphene with monoclonal antibodies and applying short-duration gate voltage pulses, we achieve selective detection of the viral spike protein in human serum within 100 µs and at concentrations as low as 1 fg ml-1, equivalent to 8 antigen molecules perµl of blood. Furthermore, the biosensor estimates spike protein concentrations in serum from COVID-19 patients. Our platform demonstrates potential for next-generation PoCT antigen assays, promising fast and sensitive diagnostics for COVID-19 and other infectious diseases.
Asunto(s)
Técnicas Biosensibles , COVID-19 , Grafito , SARS-CoV-2 , Glicoproteína de la Espiga del Coronavirus , Transistores Electrónicos , Glicoproteína de la Espiga del Coronavirus/análisis , Glicoproteína de la Espiga del Coronavirus/inmunología , Técnicas Biosensibles/instrumentación , Técnicas Biosensibles/métodos , Grafito/química , Humanos , SARS-CoV-2/aislamiento & purificación , SARS-CoV-2/inmunología , COVID-19/diagnóstico , COVID-19/sangre , COVID-19/virología , Sensibilidad y Especificidad , Anticuerpos Monoclonales/inmunología , Anticuerpos Monoclonales/químicaRESUMEN
This study examines the memory and read delay characteristics of quasi-nonvolatile memory (QNVM) devices operating in a positive feedback mechanism through technology computer-aided design simulation. The QNVM devices exhibit a rapid operation speed of 5 ns, a significant sensing margin of approximately 8.0µA, and a retention time of around 1 s without any external bias. These devices showcase an exceptionally brief read delay of 0.12 ns. The energy band diagrams during the memory operation are analyzed to clarify the factors influencing the read delay. The write and standby conditions modulate the potential barrier height during the standby operation, thereby affecting the read delay. Moreover, the shorter rising time causes the reduction of the read delay. This study demonstrates that the QNVM device has the potential to resolve energy consumption and speed issues in nonvolatile memory devices.
RESUMEN
Two-dimensional transition metal dichalcogenide (TMDC) semiconductors are emerging as strong contenders for electronic devices that can be used in highly radioactive environments such as outer space where conventional silicon-based devices exhibit nonideal characteristics for such applications. To address the radiation-induced interface effects of TMDC-based electronic devices, we studied high-energy proton beam irradiation effects on the electrical properties of field-effect transistors (FETs) made with tungsten diselenide (WSe2) channels and hexagonal boron-nitride (hBN)/SiO2gate dielectrics. The electrical characteristics of WSe2FETs were measured before and after the irradiation at various proton beam doses of 1013, 1014, and 1015cm-2. In particular, we demonstrated the dependence of proton irradiation-induced effects on hBN layer thickness in WSe2FETs. We observed that the hBN layer reduces the WSe2/dielectric interface effect which would shift the transfer curve of the FET toward the positive direction of the gate voltage. Also, this interface effect was significantly suppressed when a thicker hBN layer was used. This phenomenon can be explained by the fact that the physical separation of the WSe2channel and SiO2dielectric by the hBN interlayer prevents the interface effects originating from the irradiation-induced positive trapped charges in SiO2reaching the interface. This work will help improve our understanding of the interface effect of high-energy irradiation on TMDC-based nanoelectronic devices.
RESUMEN
Gallium oxide (Ga2O3) is attracting attention as a next-generation semiconductor material for power device because it has a wide energy band gap and high breakdown electric field. We deposited a Sn polymer, poly-tetraallyl tin, on Ga2O3samples using a disclosed initiated chemical vapor deposition (iCVD) process. The Sn dopant of the Sn polymer layer is injected into the Ga2O3through a heat treatment process. Diffusion model of Sn into the Ga2O3is proposed through secondary ion mass spectroscopy analysis and bond dissociation energy. The fabricated device exhibited typical n-type field-effect transistor (FET) behavior. Ga2O3Sn-doping technology using iCVD will be applied to 3D structures and trench structures in the future, opening up many possibilities in the Ga2O3-based power semiconductor device manufacturing process.
RESUMEN
Two-dimensional (2D) materials hold great promise for future applications, notably their use as biosensing channels in the field-effect transistor (FET) configuration. On the road to implementing one of the most widely used 2D materials, graphene, in FETs for biosensing, key issues such as operation conditions, sensitivity, selectivity, reportability, and economic viability have to be considered and addressed correctly. As the detection of bioreceptor-analyte binding events using a graphene-based FET (gFET) biosensor transducer is due to either graphene doping and/or electrostatic gating effects with resulting modulation of the electrical transistor characteristics, the gFET configuration as well as the surface ligands to be used have an important influence on the sensor performance. While the use of back-gating still grabs attention among the sensor community, top-gated and liquid-gated versions have started to dominate this area. The latest efforts on gFET designs for the sensing of nucleic acids, proteins and virus particles in different biofluids are presented herewith, highlighting the strategies presently engaged around gFET design and choosing the right bioreceptor for relevant biomarkers.