Improving hydrodynamic injection in capillary electrophoresis by using the integral of pressure.

A careful analysis of the typical devices and conditions used during hydrodynamic injection in capillary electrophoresis shows that the Hagen-Poiseuille model for the laminar flow is valid, even during the transitions of pressure. Therefore, the monitoring of pressure becomes a reliable approach to evaluate the effective injected volume, because the volume is proportional to the integral of pressure (IoP) over time. A piezoresistive sensor was used to monitor the air pressure at headspace of the sample vial. A set of 18 injections at 50 mbar and different times were used to evaluate the use of the normalization of the peak areas of the analytes by the IoP to compensate for imperfection during the injection. There was a significant decrease in relative standard deviation (RSD), and the proposed approach presented results similar to the use of internal standard. In addition, a microcontroller was used not only to monitor the pressure but also to command a peristaltic pump and a solenoid valve creating a system that dynamically controls the applied pressure and stops the injection when the desired value of IoP is reached. The system was used in a proof of concept in which different combinations of pressure and time were used: 10 mbar × 50 s, 25 mbar × 20 s, 50 mbar × 10 s, 125 mbar × 4 s, and 250 mbar × 2 s. Despite the constraints posed by the flowrates of the peristaltic pump and the solenoid valve, the microcontroller effectively conducted the injections across this extensive range of conditions, resulting in an IoP RSD of 2.7%.

A hydrodynamic injection approach for capillary electrophoresis using rotor-stator valves.

Sample injection is a critical step in a capillary electrophoresis (CE) analysis. Electrokinetic injection is the simplest approach and is often selected for implementation in portable CE instruments. However, in order to minimize the effect of sample matrix upon the results of a CE analysis, hydrodynamic injection is preferred. Although portable CE instruments with hydrodynamic injection have been reported, injection has always been performed at the grounded end of the capillary. This simplifies fluidic handling but limits coupling with electrochemical detectors and electrospray ionization-mass spectrometry (ESI-MS). We demonstrated previously that injection at the high-voltage (HV) end of the capillary could be performed using an HV-compatible rotary injection valve (fixed-volume injection). However, the mismatch between the bore sizes of the channels on the rotor-stator valve and the separation capillary caused peak tailing and undesired mixing, impairing analytical performance. In this work, we present an HV-compatible hydrodynamic injection approach that overcomes the issues associated with the fixed-volume injection approach reported previously. The performance of the CE instrument was demonstrated by analyzing a mixture of 13 amino acids by CE coupled to laser-induced fluorescence, which showed relative standard deviations for peak area and migration time below 5% and 1%, respectively, for triplicate analysis. Additionally, replicate measurements of a mixture of amino acids, peptides, nucleobases, and nucleosides by CE coupled to electrospray ionization-mass spectrometry (CE-ESI-MS) were performed to evaluate peak tailing, and results were similar to those obtained with a commercial CE-ESI-MS setup.

Reduction in sample injection bias using pressure gradients generated on chip.

Sample injection in microchip-based capillary zone electrophoresis (CZE) frequently rely on the use of electric fields which can introduce differences in the injected volume for the various analytes depending on their electrophoretic mobilities and molecular diffusivities. While such injection biases may be minimized by employing hydrodynamic flows during the injection process, this approach typically requires excellent dynamic control over the pressure gradients applied within a microfluidic network. The current article describes a microchip device that offers this needed control by generating pressure gradients on-chip via electrokinetic means to minimize the dead volume in the system. In order to realize the desired pressure-generation capability, an electric field was applied across two channel segments of different depths to produce a mismatch in the electroosmotic flow rate at their junction. The resulting pressure-driven flow was then utilized to introduce sample zones into a CZE channel with minimal injection bias. The reported injection strategy allowed the introduction of narrow sample plugs with spatial standard deviations down to about 45 µm. This injection technique was later integrated to a capillary zone electrophoresis process for analyzing amino acid samples yielding separation resolutions of about 4-6 for the analyte peaks in a 3 cm long analysis channel.

IL-8 exacerbates alcohol-induced fatty liver disease via the Akt/HIF-1α pathway in human IL-8-expressing mice.

Alcoholic fatty liver disease (AFLD) is a disease that causes liver damage due to chronic heavy drinking. AFLD is related to lipid accumulation in liver cells caused by alcohol intake. Interleukin-8 (IL-8) is an inflammatory cytokine associated with chemotaxis (deletion in mice) that has robust effects on the occurrence and development of disease by activating related signal transduction pathways to promote inflammation and cell proliferation. There is significantly increased IL-8 expression in liver disease, which may be related to the pathogenesis of AFLD. In this study, we used hydrodynamic injection to deliver the liver-specific expression vector pLIVE-hIL-8 into mice. We found that hIL-8 can exacerbate alcohol-induced fatty liver disease via the Akt/HIF-1α pathway. Exacerbated liver lipid degeneration in mice, which is characterized by excessive accumulation of triglycerides, and liver damage markers were significantly increased. Moreover, hIL-8 could increase the alcohol-induced release of ROS in fatty liver caused by alcohol and exacerbate fatty liver disease. The expression of liver lipid metabolism-related gene sterol regulatory element-binding protein-1c (SREBP-1c) was increased. Furthermore, the expression of peroxisome proliferator-activated receptor alpha (PPARα), which is related to liver fatty acid oxidation, was decreased. The findings obtained in this study of hIL-8 will help identify a potential target for the clinical treatment of AFLD.

Molecular Mechanisms and Animal Models of HBV-Related Hepatocellular Carcinoma: With Emphasis on Metastatic Tumor Antigen 1.

Hepatocellular carcinoma (HCC) is an important cause of cancer death worldwide, and hepatitis B virus (HBV) infection is a major etiology, particularly in the Asia-Pacific region. Lack of sensitive biomarkers for early diagnosis of HCC and lack of effective therapeutics for patients with advanced HCC are the main reasons for high HCC mortality; these clinical needs are linked to the molecular heterogeneity of hepatocarcinogenesis. Animal models are the basis of preclinical and translational research in HBV-related HCC (HBV-HCC). Recent advances in methodology have allowed the development of several animal models to address various aspects of chronic liver disease, including HCC, which HBV causes in humans. Currently, multiple HBV-HCC animal models, including conventional, hydrodynamics-transfection-based, viral vector-mediated transgenic, and xenograft mice models, as well as the hepadnavirus-infected tree shrew and woodchuck models, are available. This review provides an overview of molecular mechanisms and animal models of HBV-HCC. Additionally, the metastatic tumor antigen 1 (MTA1), a cancer-promoting molecule, was introduced as an example to address the importance of a suitable animal model for studying HBV-related hepatocarcinogenesis.

CDK9 is dispensable for YAP-driven hepatoblastoma development.

BACKGROUND: Hepatoblastoma (HB) is the most common pediatric liver malignancy, occurring mainly during the first 4 years of life. Recent studies unraveled the frequent, coordinated activation of Wnt/ß-catenin and YAP/Hippo (where YAP is yes-associated protein) pathways in human HB samples. Furthermore, it was found that concomitant overexpression of activated forms of ß-catenin and YAP in the mouse liver triggers HB formation in YAP/ß-catenin mice. Cyclin-dependent kinases 9 (CDK9) is an elongating kinase, which has been shown to mediate YAP-driven tumorigenesis. The role of CDK9 in HB molecular pathogenesis has not been investigated to date. METHODS: CDK9 expression was determined in human HB lesions, HB cell lines, and YAP/ß-catenin mouse livers. CDK9 was silenced in human HB cell lines and the effects on growth rate and YAP targets were analyzed. Hydrodynamic transfection of YAPS127A and ∆N90-ß-catenin together with either shCdk9 or control shLuc (where Luc is luciferase) plasmids was employed to assess the requirement of Cdk9 for HB development in vivo. RESULTS: Nuclear immunoreactivity for CDK9 protein was more pronounced in human HB samples and YAP/ß-catenin mouse HB tumor tissues than in corresponding surrounding nontumorous liver tissues. CDK9 protein was also expressed in human HB cell lines. Silencing of CDK9 in human HB cell lines did not lead to consistent effects on HB cell growth or YAP target gene expression. Surprisingly, silencing of Cdk9 led to accelerated liver tumorigenesis in YAP/ß-catenin mice. CONCLUSION: CDK9 is not a major downstream mediator of YAP oncogenic function in HB development and progression.

A new sequential injection analysis-capillary electrophoresis system with amperometric detection.

A novel and fully automated sequential injection analysis manifold coupled to a capillary electrophoresis apparatus with amperometric detection, is described. The sequential injection manifold was isolated from the high voltage by inserting an air plug into the circuit. Small buffer reservoirs were used to avoid the need to pump fresh buffer to the interface during the electrophoretic separation. No decoupling device was used to mitigate the interference from the high voltage electric field, instead the potential shift induced by the separation voltage, was accounted for. The new hydrodynamic injection method presented is based on the overpressure created in the circuit when a pinch valve is closed for a predetermined time. The injection method yields RSD values of peak height and area below 2.55 and 1.82%, respectively, at different durations of valve closure (n = 5). The capillary and working electrode alignment was achieved by adapting a commercial available capillary union. When the electrode was replaced, the alignment method proved to be very reliable, yielding RSD values of peak height and area lower than 2.64 and 2.08%, respectively (n = 8). Using this system with a gold microelectrode, dopamine, and epinephrine could be quantified within the concentration range of 1-500 µM and detected at a concentration of 0.3 µM. The methods here presented could be applied for the development of new capillary electrophoresis systems with amperometric detection and/or to the design of fully automated systems for online process monitoring purposes.

Simultaneous electrokinetic and hydrodynamic injection and sequential stacking featuring sweeping for signal amplification following MEKC during the analysis of rapamycin (sirolimus) in serum samples.

Simultaneous electrokinetic and hydrodynamic injection of rapamycin (sirolimus) with off-line and online sample preconcentration techniques and using MEKC has been studied. Compared to conventional hydrodynamic injection, a 168-fold improvement in the signal was obtained with a combination of simultaneous electrokinetic and hydrodynamic injectionand field enhanced sample injection in conjunction with a sweeping technique called sequential stacking featuring sweeping. However, the coupling of the developed electrophoretic method and solid-phase microextraction allowed the signal intensity to increase more than 231 times. In this approach, the injection of the sample at negative polarity (anode at the detector end) into the capillary and the MEKC separation was achieved within 5 min using an electrolyte (composed of 10 mM sodium tetraborate and 40 mM SDS) when ultraviolet (UV) detection was performed at 280 nm. Thus, by combining the application of the sequential stacking featuring sweeping supported by the solid-phase microextraction clean-up procedure, the detection limit (LOD) for rapamycin in a serum sample was significantly decreased, and was set at 25 ng/mL. The proposed combined simultaneous electrokinetic and hydrodynamic injection with field enhanced sample injection -sweeping technique following MEKC separation of sirolimus in human serum could be an effective tool in biomedical and clinical applications.

The doses of plasmid backbone plays a major role in determining the HBV clearance in hydrodynamic injection mouse model.

BACKGROUND: Hepatitis B virus (HBV) chronically infects approximately 350 million people worldwide, causing a major risk of liver disease and hepatocellular carcinoma (HCC). Many mouse models have been tried to establish HBV infection through injection with various HBV-containing plasmids. However, it is not well understood that different plasmids, all of which contain the similar HBV genome, even the same plasmids with different dose, results in opposite immune responses toward HBV. METHODS: In this study, we investigated the role of HBV-containing plasmid backbones and the HBcAg in determining the HBV persistence. C57BL/6 mice were injected hydrodynamically with 6 µg or 20 µg of WT pAAV/HBV1.2 plasmid, e/core-null pAAV/HBV1.2 plasmid, or none-HBV genome pAAV/control plasmid. Serum levels of HBV-related markers were measured by quantitative immunoradiometric assay (IRMA). Liver HBcAg expression was detected by immunohistochemical staining. The mRNA levels of cytokines and Th1-related immune factors were quantified by qRT-PCR. RESULTS: All mice injected with 6 µg of the pAAV/HBV1.2 plasmid shows HBsAg positive at week 6 after hydrodynamic injection (AHI) as previously investigated. However, the mice injected with 20 µg pAAV/HBV1.2 or 6µgpAAV/HBV1.2 plus 14µgpAAV/control plasmid results in HBV clearance within 4 weeks AHI, indicating the anti-HBV activity is induced by 20 µg plasmid DNA, but not by the inserted viral genome. This anti-HBV activity is independent of HBcAg and Toll like receptor (TLR) signaling pathway, since the lack of HBcAg in pAAV/HBV1.2 plasmid or stimulation with TLRs agonists does not influence the kinetics of serum HBsAg in mice. The mRNA levels of t-bet and cxcr3 were dramatically up-regulated in the liver of the mice injected with 20 µg plasmid DNA. CONCLUSION: Our studies demonstrate that plasmid backbones are responsible for modulating immune responses to determine HBV persistence or clearance in our HBV mouse model by hydrodynamic injection of HBV-containing plasmid, and Th1 cells play key roles on HBV clearance.

HBVcircle: A novel tool to investigate hepatitis B virus covalently closed circular DNA.

BACKGROUND & AIMS: Hepatitis B virus (HBV) covalently closed circular DNA (cccDNA) persists as a stable episome in infected hepatocytes and serves as a template for the transcription of all viral genes. Due to the narrow host range of HBV, the development of a robust mouse model that supports cccDNA-dependent viral replication is a key hurdle in the development of novel HBV therapeutics. This study aimed to develop a novel tool to investigate HBV cccDNA. METHODS: Through minicircle technology, HBVcircle, a recombinant cccDNA, was easily generated and extracted from a genetically engineered E. coli strain. We characterized the performance of HBVcircle in cell culture by transfection and in immunocompetent mice by hydrodynamic injection (HDI). RESULTS: We demonstrated that HBVcircle formed authentic cccDNA-like molecules in vitro in transiently transfected hepatic cells and in vivo in mouse liver after HDI. HBVcircle supported high levels and persistent HBV replication. In addition, we investigated different factors affecting HBV in vivo replication and persistence, including the host genetic background, vector design and dosage, viral genes and genotypes, and immune activation status. Furthermore, different classes of anti-HBV drugs were also assessed with the HBVcircle system. CONCLUSION: Compared with previous reported HBV mouse models which employ other viral vectors to introduce overlength HBV genomes, viral gene expression and associated phenotypes are entirely driven by cccDNA-like viral genomes in the HBVcircle mouse model. Therefore, the HBVcircle is a close mimic of cccDNA, and it represents a novel tool for addressing HBV cccDNA related biological questions and for anti-HBV drug discovery. LAY SUMMARY: To establish a mouse model that supports cccDNA-dependent transcription, a novel tool named HBVcircle, was developed with minicircle technology. HBVcircle formed authentic cccDNA-like molecules in hepatocytes, and supported high levels and persistent HBV replication in vivo. The HBVcircle is a close mimic of cccDNA, and it represents a novel tool for addressing HBV cccDNA related biological questions and for anti-HBV drug discovery.

The dose of HBV genome contained plasmid has a great impact on HBV persistence in hydrodynamic injection mouse model.

BACKGROUND: Hydrodynamic injection (HI) of hepatitis B virus (HBV) mouse model is an useful tool for HBV related research in vivo. However, only 40% of C57/BL6 mice injected with 10 µg HBV genome contained plasmid (pAAV-HBV1.2), serum HBsAg more than 6 months and none of the BALB/c mice injected with 10 µg pAAV-HBV1.2 plasmid DNA, serum HBsAg positive more than 4 weeks in the previous study. METHODS: In this study, C57/BL6 and BALB/c mice were hydrodynamic injected with different doses of pAAV-HBV1.2 plasmid DNA. HBV related serum markers were detected by ELISA. ALT levels in the serum were measured using full automated biochemistry analyzer. HBcAg positive cells in the liver were detected by immunohistochemical staining. The mRNA levels of IRF3, ISGs including ISG15, OAS, PKR and immune factors including IFNγ, TNFα, TGFß, IL-6, IL-10, PDL1 in liver of the mice were quantified by qRT-PCR. RESULTS: The results showed that the mice injected with 100 µg high-concentration or 1 µg low-concentration of pAAV-HBV1.2 plasmid DNA did not excert dominant influence on HBV persistence. In contrast, injection of 5 µg intermediate-dose of pAAV-HBV1.2 plasmid DNA led to significant prolonged HBsAg expression and HBV persistence in both C57/BL6 (80% of the mice with HBsAg positive more than 6 months) and BALB/c (60% of the mice with HBsAg positive more than 3 months) mice. IFNγ was significant up-regulated in liver of the mice injected with 1 µg or 100 µg pAAV-HBV1.2 plasmid DNA. TNFα was up-regulated significantly in liver of the mice injected with 100 µg pAAV-HBV1.2 plasmid DNA. Moreover, PDL1 was significant up-regulated in liver of the mice injected with 5 µg pAAV-HBV1.2 plasmid DNA. CONCLUSION: In this paper we demonstrated that, in the HBV HI mouse model, the concentration of injected pAAV-HBV1.2 plasmid DNA contributes to the diverse kinetics of HBsAg and HBeAg in the serum as well as HBcAg expression level in the liver, which then determined the HBV persisternce, while the antiviral factors IFNγ, TNFα as well as immune negative regulatory factor PDL1 play important roles on HBV persistence.

Novel murine tumour models depend on strain and route of inoculation.

This study describes variations in tumour growth patterns which occur when changes in the routes of inoculation and mouse strain are used to introduce tumours into established murine model systems that are known to vary in location and aggression. Intraperitoneal, subcutaneous, intravenous and hydrodynamic inoculations of B16F10 cells were compared among CD-1, C57BL/6 and Balb/c mice. Most surprisingly, allogeneic tumour growth in Balb/c mice after intravenous and hydrodynamic inoculation of B16F10 cells was faster than tumour growth in the syngeneic C57BL/6 mice. These and other variations in the tumour growth patterns described here can help provide the researcher with more experimental control when planning to use the optimal tumour model for any particular study.

Electrokinetic sample preconcentration and hydrodynamic sample injection for microchip electrophoresis using a pneumatic microvalve.

A microfluidic platform was developed to perform online electrokinetic sample preconcentration and rapid hydrodynamic sample injection for zone electrophoresis using a single microvalve. The polydimethylsiloxane microchip comprises a separation channel, a side channel for sample introduction, and a control channel which is used as a pneumatic microvalve aligned at the intersection of the two flow channels. The closed microvalve, created by multilayer soft lithography, serves as a nanochannel preconcentrator under an applied electric potential, enabling current to pass through while preventing bulk flow. Once analytes are concentrated, the valve is briefly opened and the stacked sample is pressure injected into the separation channel for electrophoretic separation. Fluorescently labeled peptides were enriched by a factor of ∼450 in 230 s. This method enables both rapid analyte concentration and controlled injection volume for high sensitivity, high-resolution CE.

Validation of Mitochondrial Gene Delivery in Liver and Skeletal Muscle via Hydrodynamic Injection Using an Artificial Mitochondrial Reporter DNA Vector.

For successful mitochondrial transgene expression, two independent processes, i.e., developing a mitochondrial gene delivery system and construction of DNA vector to achieve mitochondrial gene expression, are required. To date, very few studies dealing with mitochondrial gene delivery have been reported and, in most cases, transgene expression was not validated, because the construction of a reporter DNA vector for mitochondrial gene expression is the bottleneck. In this study, mitochondrial transgene expression by the in vivo mitochondrial gene delivery of an artificial mitochondrial reporter DNA vector via hydrodynamic injection is demonstrated. In the procedure, a large volume of naked plasmid DNA (pDNA) is rapidly injected. We designed and constructed pHSP-mtLuc (CGG) as a mitochondrial reporter DNA vector that possesses a mitochondrial heavy strand promoter (HSP) and an artificial mitochondrial genome with the reporter NanoLuc (Nluc) luciferase gene that records adjustments to the mitochondrial codon system. We delivered the pDNA into mouse liver mitochondria by hydrodynamic injection, and detected exogenous mRNA in the liver using reverse transcription PCR analysis. The hydrodynamic injection of pHSP-mtLuc (CGG) resulted in the expression of the Nluc luciferase protein in liver and skeletal muscle. Our mitochondrial transgene expression reporter system would contribute to mitochondrial gene therapy and further studies directed at mitochondrial molecular biology.

Removal of transgene-expressing cells by a specific immune response induced by sustained transgene expression.

BACKGROUND: Induction of the immune response to transgene products is a serious concern in gene therapy, and is generally known to be influenced by the transgene expression profile, as well as the types of cells that express the transgene. However, the exact nature of the association between the transgene expression profile and immune induction following gene transfer is unclear. METHODS: In the present study, plasmids, pCpG-fLuc or pCMV-fLuc, used for driving long- or short-term expression of firefly luciferase, respectively, were injected into mice by hydrodynamic injections along with a reporter plasmid expressing Gaussia luciferase (pROSA-gLuc) to evaluate the transgene expression profile in the liver. Single pROSA-gLuc administration resulted in stable gLuc activity in serum for more than 1 year; thus, gLuc activity was used for monitoring immune responses to the liver cells expressing both gLuc and fLuc after co-injection. RESULTS: A significant reduction in gLuc activity was observed 2 weeks after co-injection of pROSA-gLuc with pCpG-fLuc, whereas stable gLuc activity was observed when pROSA-gLuc was co-injected with pCMV-fLuc. A high level of fLuc-specific immunoglobulin G was detectable in pCpG-fLuc-injected mice; furthermore, histological analysis of the liver sections of these mice indicated CD8(+) cell infiltration, implying that the transgene-expressing hepatocytes were removed by the infiltrating cells. CONCLUSIONS: Our results demonstrate that sustained transgene expression in hepatocytes triggers antigen-specific immune responses, although short-term expression of the same transgene product elicits little, if any, immune response.

Early application of IFNγ mediated the persistence of HBV in an HBV mouse model.

The antiviral activity of interferon gamma (IFNγ) against hepatitis B virus (HBV) was demonstrated both in vivo and in vitro in a previous study. IFNγ can suppress HBV replication by accelerating the decay of replication-competent nucleocapsids of HBV. However, in this study, we found that the direct application of the mouse IFNγ (mIFNγ) expression plasmid to the liver of an HBV hydrodynamic injection (HI) mouse model led to the persistence of HBV, as indicated by sustained HBsAg and HBeAg levels in the serum as well as an increased percentage of the HBsAg positive mice, whereas the level of HBV DNA in the serum and the expression of HBcAg in the liver were inhibited at the early stage after HI. Meanwhile, we found that the productions of both HBcAb and HBsAb were suppressed after the application of mIFNγ. In addition, we found that HBV could be effectively inhibited in mice immunized with HBsAg expression plasmid before the application of mIFNγ. Furthermore, mIFNγ showed antiviral effect and promoted the production of HBsAb when the mice subjected to the core-null HBV plasmid. These results indicate that the application of mIFNγ in the HBV HI mouse model, the mice showed defective HBcAg-specific immunity that impeded the production of HBcAb and HBsAb, finally allowing the persistence of the virus. Moreover, IFNγ-induced negative immune regulatory factors also play an important role in virus persistence.

Neutral Block Copolymer Assisted Gene Delivery using Hydrodynamic Limb Vein Injection.

Three different amphiphilic block copolymer families are synthesized to investigate new opportunities to enhance gene delivery via Hydrodynamic Limb Vein (HLV) injections. First a polyoxazoline-based family containing mostly one poly(2-methyl-2-oxazoline) (PMeOx) block and a second block POx with an ethyl (EtOx), isopropyl (iPrOx) or phenyl substituent (PhOx) is synthesized. Then an ABC poly(2-ethyl-2-oxazoline)-b-poly(2-n-propyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline) triblock copolymer is synthesized, with a thermosensitive middle block. Finally, polyglycidol-b-polybutylenoxide-b-polyglycidol copolymers with various molar masses and amphiphilic balance are produced. The simple architecture of neutral amphiphilic triblock copolymer is not sufficient to obtain enhanced in vivo gene transfection. Double or triple amphiphilic neutral block copolymers are improving the in vivo transfection performances through HLV administration as far as a block having an lower critical solution temperature is incorporated in the vector. The molar mass of the copolymer does not seem to affect the vector performances in a significant manner.

Oncogene-Driven Induction of Orthotopic Cholangiocarcinoma in Mice.

Cholangiocarcinoma (CCA) is a malignancy affecting the epithelial cells that line the bile ducts. This cancer shows a poor prognosis and current treatments remain inefficient. Orthotopic CCA mouse models are useful for the development of innovative therapeutic strategies. Here, we describe an orthotopic model of intrahepatic CCA that can be easily induced in mice within 5 weeks at a high incidence. It is achieved by expressing two oncogenes, namely, (i) the intracellular domain of the Notch1 receptor (NICD) and (ii) AKT, in hepatocytes by means of the sleeping beauty transposon system. These plasmid vectors are delivered by hydrodynamic injection into the tail vein. The present chapter also describes how to perform magnetic resonance imaging (MRI) of the livers to visualize intrahepatic CCA nodules.

Hydrodynamic Delivery: Characteristics, Applications, and Technological Advances.

The principle of hydrodynamic delivery was initially used to develop a method for the delivery of plasmids into mouse hepatocytes through tail vein injection and has been expanded for use in the delivery of various biologically active materials to cells in various organs in a variety of animal species through systemic or local injection, resulting in significant advances in new applications and technological development. The development of regional hydrodynamic delivery directly supports successful gene delivery in large animals, including humans. This review summarizes the fundamentals of hydrodynamic delivery and the progress that has been made in its application. Recent progress in this field offers tantalizing prospects for the development of a new generation of technologies for broader application of hydrodynamic delivery.

Establishment of a Novel Mouse Hepatocellular Carcinoma Model for Dynamic Monitoring of Tumor Development by Bioluminescence Imaging.

In this study, a novel mouse model of hepatocellular carcinoma (HCC) was established by simultaneously knocking out Pten and p53 suppressor genes and overexpressing c-Met and △90-ß-catenin proto-oncogenes in the livers of mice via hydrodynamic injection (HDI). The mutations were introduced using the CRISPR/Cas9 and Sleeping Beauty transposon systems. In this way, a primary liver cancer model was established within six weeks. In addition, macrophages expressing arginase-1(Arg1) promoter coupled with firefly luciferase were engineered for bioluminescence imaging (BLI) of the tumor microenvironment. This novel, rapidly-generated model of primary hepatocellular carcinoma can be monitored noninvasively, which can facilitate not only applications of the model, but also the development of new drugs and treatment strategies of HCC.