Computational Identification and Experimental Demonstration of High-Performance Methane Sorbents.

Remarkable methane uptake is demonstrated experimentally in three metal-organic frameworks (MOFs) identified by computational screening: UTSA-76, UMCM-152 and DUT-23-Cu. These MOFs outperform the benchmark sorbent, HKUST-1, both volumetrically and gravimetrically, under a pressure swing of 80 to 5 bar at 298 K. Although high uptake at elevated pressure is critical for achieving this performance, a low density of high-affinity sites (coordinatively unsaturated metal centers) also contributes to a more complete release of stored gas at low pressure. The identification of these MOFs facilitates the efficient storage of natural gas via adsorption and provides further evidence of the utility of computational screening in identifying overlooked sorbents.

Ligand-Conformer-Induced Formation of Zirconium-Organic Framework for Methane Storage and MTO Product Separation.

In pursuit of novel adsorbents with efficient adsorptive gas storage and separation capabilities remains highly desired and challenging. Although the documented zirconium-tricarboxylate-based metal-organic frameworks (MOFs) have displayed a variety of topologies encompassing underlying and geometry mismatch ones, the employed organic linkers are exclusively rigid and poorly presenting one type of conformation in the resultant structures. Herein, a used and semirigid tricarboxylate ligand of H3 TATAB was judiciously selected to isolate a zirconium-based spe-MOF after the preliminary discovery of srl-MOF. Single-crystal X-ray diffraction reveals that the fully deprotonated TATAB linker in spe-MOF exhibits two distinct conformers, concomitant with popular Oh and rare S6 symmetrical Zr6 molecular building blocks, generating an unprecedented (3,3,12,12)-c nondefault topology. Specifically, the spe-MOF exhibits structurally higher complexity, hierarchical micropores, open metal sites free and rich electronegative groups on the pore surfaces, leading to relatively high methane storage capacity without considering the missing-linker defects and efficient MTO product separation performance.

Molecular Expansion for Constructing Porous Organic Polymers with High Surface Areas and Well-Defined Nanopores.

Construction of porous organic polymers (POPs) with high surface areas, well-defined nanopores, and excellent stability remains extremely challenging because of the unmanageable reaction process. Until now, only a few reported POPs have Brunauer-Emmett-Teller (BET) surface areas (SBET ) exceeding 3000 m2 g-1 . Herein, we demonstrate a molecular expansion strategy to integrate high surface areas, large nanopore sizes, and outstanding stability into POPs. A series of hyper-crosslinked conjugated polymers (HCCPs) with exceptional porosity are synthesized through this strategy. Specially, HCCP-6 and HCCP-11 exhibit the highest surface areas (SBET >3000 m2 g-1 ) and excellent total pore volumes (up to 3.98 cm3 g-1 ) among these HCCPs. They present decent total CH4 storage capacities of 491 and 421 mg g-1 at 80 bar and 298 K, respectively. Meanwhile, they are highly stable in harsh environments. The facile and general molecular expansion strategy would lead to improved synthetic routes of POPs for desired functions.

The influence of biochar and compost mixtures, water content, and gas flow rate, on the continuous adsorption of methane in a fixed bed column.

Biofiltration is an excellent alternative for the treatment of diffuse emissions of methane (CH4) that cannot be treated by physical/chemical means or recovered for energy. Despite the advances on CH4 biological treatment technologies, they are limited by the low aqueous solubility of CH4 into the biofilm where CH4 mineralization occurs. In this study, the CH4 adsorption kinetics, adsorption capacity and transport behavior of CH4 was studied in batch experiments and in a fixed-bed column by varying the biochar and compost mixtures under 5-levels, 3 different water contents (dry, 15% and 30% water holding capacity), and 2 inlet flow rates. Experimental results were formally tested using analysis of variance (ANOVA) in order to draw objective conclusions based on statistical inference. As CH4 biofiltration requires water addition to maintain microbial activity, these results indicate adsorption capacity is not lost with water addition if biochar content is the dominant packing material. The Langmuir isotherm described the data best (R2 = 0.99). Maximum adsorption capacity by monolayer adsorption, or qmax, is relatively similar with or without the addition of water as long as the biochar component is the dominant material at 3.5 mg CH4/g medium for a 7:1 biochar: compost, v/v mixture. Empirical regression models for qo, kTh, (Thomas model) and τ and KYN (Yoon-Nelson model) were developed for the break through curves of CH4. The current work demonstrates the applicability of utilizing biochar, a relatively inexpensive adsorbent, can compensate for the low solubility of CH4 and overcome the rate-limiting step of mass transfer from the gas phase and into the methanotrophic biofilm. Further, biochar may be a reliable back-up system for CH4 storage especially for fluctuating inlet loads that may be encountered in industrial applications adsorbing up to 13 mg CH4/g biochar under dry conditions.

Harnessing Bottom-Up Self-Assembly To Position Five Distinct Components in an Ordered Porous Framework.

Positioning a diverse set of building blocks in a well-defined array enables cooperativity amongst them and the systematic programming of functional properties. The extension of this concept to porous metal-organic frameworks (MOFs) is challenging since the installation of multiple components in a well-ordered framework requires careful design of the lattice topology, judicious selection of building blocks, and precise control of the crystallization parameters. Herein, we report how we met these challenges to prepare the first quinary MOF structure, FDM-8, by bottom-up self-assembly from two metals, ZnII and CuI , and three distinct carboxylate- and pyrazolate-based linkers. With a surface area of 3643 m2 g-1 , FDM-8 contains hierarchical pores and shows outstanding methane-storage capacity at high pressure. Furthermore, functional groups introduced on the linkers became compartmentalized in predetermined arrays in the pores of the FDM-8 framework.

Incorporating Heavy Alkanes in Metal-Organic Frameworks for Optimizing Adsorbed Natural Gas Capacity.

Metal-organic frameworks (MOFs) as methane adsorbents are highly promising materials for applications such as methane-powered vehicles, flare gas capture, and field natural gas separation. Pre- and post-synthetic modification of MOFs have been known to help improve both the overall methane uptake as well as the working capacity. Here, a post-synthetic modification strategy to non-covalently modify MOF adsorbents for the enhancement of the natural gas uptake for the MOF material is introduced. In this study, PCN-250 adsorbents were doped with C10 alkane and C14 fatty acid and their impact on the methane uptake capabilities was investigated. It was found that even trace amounts of heavy hydrocarbons could considerably enhance the raw methane uptake of the MOF while still being regenerable. The doped hydrocarbons are presumably located at the mesoporous defects of PCN-250, thus optimizing the framework-methane interactions. These findings reveal a general approach that can be used to modify the MOF absorbents, improving their ability to be sustainable and renewable natural gas adsorption platforms.

Reversible Switching between Highly Porous and Nonporous Phases of an Interpenetrated Diamondoid Coordination Network That Exhibits Gate-Opening at Methane Storage Pressures.

Herein, we report that a new flexible coordination network, NiL2 (L=4-(4-pyridyl)-biphenyl-4-carboxylic acid), with diamondoid topology switches between non-porous (closed) and several porous (open) phases at specific CO2 and CH4 pressures. These phases are manifested by multi-step low-pressure isotherms for CO2 or a single-step high-pressure isotherm for CH4 . The potential methane working capacity of NiL2 approaches that of compressed natural gas but at much lower pressures. The guest-induced phase transitions of NiL2 were studied by single-crystal XRD, in situ variable pressure powder XRD, synchrotron powder XRD, pressure-gradient differential scanning calorimetry (P-DSC), and molecular modeling. The detailed structural information provides insight into the extreme flexibility of NiL2 . Specifically, the extended linker ligand, L, undergoes ligand contortion and interactions between interpenetrated networks or sorbate-sorbent interactions enable the observed switching.

Crystallization of Covalent Organic Frameworks for Gas Storage Applications.

Covalent organic frameworks (COFs) have emerged as a new class of crystalline porous materials prepared by integrating organic molecular building blocks into predetermined network structures entirely through strong covalent bonds. The consequently encountered "crystallization problem" has been conquered by dynamic covalent chemistry in syntheses and reticular chemistry in materials design. In this contribution, we have reviewed the progress in the crystallization of COF materials and their hydrogen, methane and carbon dioxide gas storage properties for clean energy applications.

Fine Tuning of MOF-505 Analogues To Reduce Low-Pressure Methane Uptake and Enhance Methane Working Capacity.

We present a crystal engineering strategy to fine tune the pore chemistry and CH4 -storage performance of a family of isomorphic MOFs based upon PCN-14. These MOFs exhibit similar pore size, pore surface, and surface area (around 3000 m2 g-1 ) and were prepared with the goal to enhance CH4 working capacity. [Cu2 (L2)(H2 O)2 ]n (NJU-Bai 41: NJU-Bai for Nanjing University Bai's group), [Cu2 (L3)(H2 O)2 ]n (NJU-Bai 42), and [Cu2 (L4)(DMF)2 ]n (NJU-Bai 43) were prepared and we observed that the CH4 volumetric working capacity and volumetric uptake values are influenced by subtle changes in structure and chemistry. In particular, the CH4 working capacity of NJU-Bai 43 reaches 198 cm3 (STP: 273.15 K, 1 atm) cm-3 at 298 K and 65 bar, which is amongst the highest reported for MOFs under these conditions and is much higher than the corresponding value for PCN-14 (157 cm3 (STP) cm-3 ).

Rigidity with Flexibility: Porous Triptycene Networks for Enhancing Methane Storage.

In the pursuit of advancing materials for methane storage, a critical consideration arises given the prominence of natural gas (NG) as a clean transportation fuel, which holds substantial potential for alleviating the strain on both energy resources and the environment in the forthcoming decade. In this context, a novel approach is undertaken, employing the rigid triptycene as a foundational building block. This strategy is coupled with the incorporation of dichloromethane and 1,3-dichloropropane, serving as rigid and flexible linkers, respectively. This combination not only enables cost-effective fabrication but also expedites the creation of two distinct triptycene-based hypercrosslinked polymers (HCPs), identified as PTN-70 and PTN-71. Surprisingly, despite PTN-71 manifesting an inferior Brunauer-Emmett-Teller (BET) surface area when compared to the rigidly linked PTN-70, it showcases remarkably enhanced methane adsorption capabilities, particularly under high-pressure conditions. At a temperature of 275 K and a pressure of 95 bars, PTN-71 demonstrates an impressive methane adsorption capacity of 329 cm3 g-1. This exceptional performance is attributed to the unique flexible network structure of PTN-71, which exhibits a pronounced swelling response when subjected to elevated pressure conditions, thus elucidating its superior methane adsorption characteristics. The development of these advanced materials not only signifies a significant stride in the realm of methane storage but also underscores the importance of tailoring the structural attributes of hypercrosslinked polymers for optimized gas adsorption performance.

Machine Learning Predictions of Methane Storage in MOFs: Diverse Materials, Multiple Operating Conditions, and Reverse Models.

A machine learning (ML) model is developed for predicting useable methane (CH4) capacities in metal-organic frameworks (MOFs). The model applies to a wide variety of MOFs, including those with and without open metal sites, and predicts capacities for multiple pressure swing conditions. Despite its wider applicability, the model requires only 5 measurable structural features as input, yet achieves accuracies that surpass less-general models. Application of the model to a database of more than a million hypothetical MOFs identified several hundred whose capacities surpass that of the benchmark MOF, UMCM-152. Guided by the computational predictions, one of the promising candidates, UMCM-153, was synthesized and demonstrated to achieve superior volumetric capacity for CH4. Feature importance analyses reveal that pore volume and gravimetric surface area are the most important features for predicting CH4 capacity in MOFs. Finally, a reverse ML model is demonstrated. This model predicts the set of elementary MOF structural properties needed to achieve a desired CH4 capacity for a prescribed operating condition.

Dibromomethane Knitted Highly Porous Hyper-Cross-Linked Polymers for Efficient High-Pressure Methane Storage.

Hyper-cross-linked polymers (HCPs) with ultra-high porosity, superior physicochemical stability, and excellent cost-effectiveness are attractive candidates for methane storage. However, the construction of HCPs with BET surface areas exceeding 3000 m2 g-1 remains extremely challenging. In this work, a newly developed DBM-knitting method with a slow-knitting rate is employed to increase the cross-linking degree, in which dichloromethane (DCM) is replaced by dibromomethane (DBM) as both solvent and electrophilic cross-linker, resulting in highly porous and physicochemically stable HCPs. The BET surface areas of DBM-knitted SHCPs-Br are 44%-120% higher than that of DCM-knitted SHCPs-Cl using the same building blocks. Remarkably, SHCP-3-Br exhibits an unprecedentedly high porosity (SBET = 3120 m2 g-1) among reported HCPs, and shows a competitive volumetric 5-100 bar working methane capacity of 191 cm3 (STP) cm-3 at 273 K calculated by using real packing density, which outperforms sate-of-art metal-organic framework (MOFs) at comparable conditions. This facile and versatile low-knitting-rate strategy enables effective improvement in the porosity of HCPs for porosity-desired applications.

Metal Doping to Control Gate Opening and Increase Methane Working Capacity in Isostructural Flexible Diamondoid Networks.

Adsorbed natural gas (ANG) systems involve using porous materials to increase the working capacity and/or reduce the storage pressure compared to compressed natural gas (CNG). Flexible metal-organic materials (FMOMs) are particularly interesting in this context since their stepped isotherms can afford increased working capacity if the adsorption/desorption steps occur within the proper pressure range. We report herein that metal doping in a family of isostructural FMOMs, ML2 (M=Co, Ni or Nix Co1-x , L=4-(4-pyridyl)-biphenyl-4-carboxylic acid), enables control over the gate opening between non-porous (closed) and porous (open) phases at pressures relevant to methane storage. Specifically, methane-induced phase transformations can be fine-tuned by using different Ni/Co ratios to enhance methane working capacity. The optimal working capacity from 5 to 35 bar at 298 K (153 cm3  cm-3 ) was found for Ni0.89 Co0.11 L2 (X-dia-1-Ni0.89 Co0.11 ), which is greater than that of benchmark rigid MOFs.

Discovery of High-Performing Metal-Organic Frameworks for On-Board Methane Storage and Delivery via LNG-ANG Coupling: High-Throughput Screening, Machine Learning, and Experimental Validation.

Liquefied natural gas (LNG) gasification coupled with adsorbed natural gas (ANG) charging (LNG-ANG coupling) is an emerging strategy for efficient delivery of natural gas. However, the potential of LNG-ANG to attain the advanced research projects agency-energy (ARPA-E) target for onboard methane storage has not been fully investigated. In this work, large-scale computational screening is performed for 5446 metal-organic frameworks (MOFs), and over 193 MOFs whose methane working capacities exceed the target (315 cm3 (STP) cm-3 ) are identified. Furthermore, structure-performance relationships are realized under the LNG-ANG condition using a machine learning method. Additional molecular dynamics simulations are conducted to investigate the effects of the structural changes during temperature and pressure swings, further narrowing down the materials, and two synthetic targets are identified. The synthesized DUT-23(Cu) and DUT-23(Co) show higher working capacities (≈373 cm3 (STP) cm-3 ) than that of any other porous material under ANG or LNG-ANG conditions, and excellent stability during cyclic LNG-ANG operation.

Using Helium Pycnometry to Study the Apparent Densities of Metal-Organic Frameworks.

When investigating the gas storage capacities of metal-organic frameworks, volumetric values are often reported based on crystallographic densities. Although it is widely accepted that Langmuir and BET surface areas of a given MOF can vary depending on the exact synthetic conditions used to prepare the materials, it is rare that deviations in density from the optimal crystallographic density are considered. The actual (apparent) densities of these materials are highly variable depending on the presence of defects, impurities, or multiple phases that arise during synthesis. The apparent density of specific samples, which represent an experimentally determined crystallographic density, can be measured with helium pycnometry where the skeletal density measured via pycnometry is easily converted to an apparent density. In the work reported here, apparent density was measured for 46 samples across a series of different structure types where experimentally measured density was consistently lower than crystallographic density, up to 30% in some cases. Subsequently, use of this technique allows for quantification of densities for those materials whose structures have not been crystallographically determined.

Tuning Open Metal Site-Free ncb Type of Metal-Organic Frameworks for Simultaneously High Gravimetric and Volumetric Methane Storage Working Capacities.

The design and synthesis of a single metal-organic framework (MOF) material with simultaneously high gravimetric and volumetric methane storage working capacities are still a great challenge. The open metal site (OMS) in MOFs is generally regarded as an advantage to enhance host-guest affinity. However, it is detrimental to the methane storage working capacity to some extent due to the resulting high low-pressure uptake. Moreover, the reported methane storage MOFs are predominately focusing on edge-transitive or low-connected mixed-linker networks. In contrast, high-connected mixed-linker MOFs have been less investigated for methane storage. Herein, three isoreticular nine-connected trinuclear iron-based Fe-ncb-MOFs without OMSs have been judiciously designed and successfully constructed by means of the mixed-linker approach associated with the fixing amide-functionalized pyridyl-carboxylate ligand LP (4-(pyridin-4-ylcarbamoyl)benzoate) and three differing sized dicarboxylate ligands. High-pressure methane adsorption measurements show that, with the isoreticular extension from BDC (1,4-benzenedicarboxylate) to BPDC (4,4'-biphenyldicarboxylate) and ABDC (azobenzene-4,4'-dicarboxylate), three Fe-ncb-MOFs exhibit gradually increasing not only gravimetric but also volumetric storage capacities because of their balancing gravimetric surface area and volumetric surface area, hierarchical pore system, and modest CH4 heats of adsorption. Among them, the Fe-ncb-ABDC demonstrates a rare combination of simultaneously high gravimetric and volumetric CH4 storage working capacities of 0.302/0.37 g g-1 and 196/240 cm3 (STP) cm-3 at 298/273 K and between 80 and 5 bar, respectively, which outperform the 8-c Fe-8T18-ABDC assembled from a shorter pyridyl-carboxylate ligand IN (isonicotinate) and ABDC, due to its limited pore volume, the presence of OMSs, and more confined pore spaces, and place Fe-ncb-ABDC among the best performing MOFs.

Computational Screening of Trillions of Metal-Organic Frameworks for High-Performance Methane Storage.

In the past decade, there has been an increasing number of computational screening works to facilitate finding optimal materials for a variety of different applications. Unfortunately, most of these screening studies are limited to their initial set of materials and result in a brute-force type of screening approach. In this work, we present a systematic strategy that can find metal-organic frameworks (MOFs) with the desired properties from an extremely diverse and large set of over 100 trillion possible MOFs using machine learning and evolutionary algorithm. It is demonstrated that our algorithm can discover 964 MOFs with methane working capacity over 200 cm3 cm-3 and 96 MOFs with methane working capacity over the current world record of 208 cm3 cm-3. We believe that this methodology can take advantage of the modular nature of MOFs and can readily be extended to other important applications as well.

Heat and Mass Transfer in an Adsorbed Natural Gas Storage System Filled with Monolithic Carbon Adsorbent during Circulating Gas Charging.

Adsorbed natural gas (ANG) technology is a promising alternative to traditional compressed (CNG) and liquefied (LNG) natural gas systems. Nevertheless, the energy efficiency and storage capacity of an ANG system strongly depends on the thermal management of its inner volume because of significant heat effects occurring during adsorption/desorption processes. In the present work, a prototype of a circulating charging system for an ANG storage tank filled with a monolithic nanoporous carbon adsorbent was studied experimentally under isobaric conditions (0.5-3.5 MPa) at a constant volumetric flow rate (8-18 m3/h) or flow mode (Reynolds number at the adsorber inlet from 100,000 to 220,000). The study of the thermal state of the monolithic adsorbent layer and internal heat exchange processes during the circulating charging of an adsorbed natural gas storage system was carried out. The correlation between the gas flow mode, the dynamic gas flow temperature, and the heat transfer coefficient between the gas and adsorbent was determined. A one-dimensional mathematical model of the circulating low-temperature charging process was developed, the results of which correspond to the experimental measurements.

Design of Zeolite-Covalent Organic Frameworks for Methane Storage.

A new type of zeolite-based covalent organic frameworks (ZCOFs) was designed under different topologies and linkers. In this study, the silicon atoms in zeolite structures were replaced by carbon atoms in thiophene, furan, and pyrrole linkers. Through the adoption of this strategy, 300 ZCOFs structures were constructed and simulated. Overall, the specific surface area of ZCOFs is in the range of 300-3500 m2/g, whereas the pore size is distributed from 3 to 27 Å. Furthermore, the pore volume exhibits a wide range between 0.01 and 1.5 cm3/g. Screening 300 ZCOFs with the criteria towards methane storage, 11 preliminary structures were selected. In addition, the Grand Canonical Monte Carlo technique was utilized to evaluate the CH4 adsorption ability of ZCOFs in a pressure ranging from 1 to 85 bar at a temperature of 298 K. The result reveals that two ZCOF structures: JST-S 183 v/v (65-5.8 bar) and NPT-S 177 v/v (35-1 bar) are considered as potential adsorbents for methane storage. Furthermore, the thermodynamic stability of representative structures is also checked base on quantum mechanical calculations.

Thermodynamic Behaviors of Adsorbed Methane Storage Systems Based on Nanoporous Carbon Adsorbents Prepared from Coconut Shells.

The present work focused on the experimental study of the performance of a scaled system of adsorbed natural gas (ANG) storage and transportation based on carbon adsorbents. For this purpose, three different samples of activated carbons (AC) were prepared by varying the size of coconut shell char granules and steam activation conditions. The parameters of their porous structure, morphology, and chemical composition were determined from the nitrogen adsorption at 77 K, X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), and scanning electron microscopy (SEM) measurements. The methane adsorption data measured within the temperature range from 178 to 360 K and at pressures up to 25 MPa enabled us to identify the most efficient adsorbent among the studied materials: AC-90S. The differential heats of methane adsorption on AC-90S were determined in order to simulate the gas charge/discharge processes in the ANG system using a mathematical model with consideration for thermal effects. The results of simulating the charge/discharge processes under two different conditions of heat exchange are consistent with the experimentally determined temperature distribution over a scaled ANG storage tank filled with the compacted AC-90S adsorbent and equipped with temperature sensors and heat-exchanger devices. The amounts of methane delivered from the ANG storage system employing AC-90S as an adsorbent differ from the model predictions by 4-6%. Both the experiments and mathematical modeling showed that the thermal regulation of the ANG storage tank ensured the higher rates of charge/discharge processes compared to the thermal insulation.