Postsynthetically Modified Cationic, Robust MOF Featuring Selective Separation of Carboxylate-Containing Pharmaceutical Drugs from Water at Neutral pH: Elucidation of the Adsorption Mechanism by Theory and Experiments.

The escalating levels of hazardous pharmaceutical contaminants, specifically nonsteroidal anti-inflammatory drugs (NSAIDs), in groundwater reservoir surfaces and surface waterway systems have prompted substantial scientific interest regarding their potential deleterious effects on both aquatic ecosystems and human health. Extraction of those pollutants from wastewater is quite challenging. Hence, the development of economic, sustainable, and scalable techniques for capturing and removing those pollutants is crucial to ensure water safety. Herein, we demonstrate a physicochemically stable, reusable, porous Hf(IV)-based cationic metal-organic framework (MOF), namely, 1'@MeCl for the aqueous phase adsorption-based removal of NSAIDs (diclofenac, naproxen, ibuprofen) from the wastewater environment. The highly positively charged surface of the 1'@MeCl MOF enables it to selectively extract more than 99% of diclofenac, naproxen, and ibuprofen contaminants within less than 30 s. With fast adsorption kinetics, very high adsorption capacities (Qe) were achieved at neutral pH for diclofenac (482.9 mg/g), naproxen (295.9 mg/g), and ibuprofen (219.5 mg/g). Moreover, the influence of changes in pH and coexisting anions on the adsorption property of the 1'@MeCl MOF was studied. Furthermore, the adsorption efficiency of 1'@MeCl in different real water environments was ensured by performing diclofenac, naproxen, and ibuprofen adsorption from tap, river, and lake water. Moreover, a 1'@MeCl-anchored cellulose acetate-chitosan membrane was developed successfully to demonstrate the membrane-based extraction of diclofenac, naproxen, and ibuprofen from contaminated water. Furthermore, a molecular-level mechanistic study was performed through experimental and computational study to propose the plausible adsorption mechanisms for diclofenac, naproxen, and ibuprofen over the surface of 1'@MeCl.

Geopolymer-Based Materials for the Removal of Ibuprofen: A Preliminary Study.

Every year, new compounds contained in consumer products, such as detergents, paints, products for personal hygiene, and drugs for human and veterinary use, are identified in wastewater and are added to the list of molecules that need monitoring. These compounds are indicated with the term emerging contaminants (or Contaminants of Emerging Concern, CECs) since they are potentially dangerous for the environment and human health. To date, among the most widely used methodologies for the removal of CECs from the aquatic environment, adsorption processes play a role of primary importance, as they have proven to be characterized by high removal efficiency, low operating and management costs, and an absence of undesirable by-products. In this paper, the adsorption of ibuprofen (IBU), a nonsteroidal anti-inflammatory drug widely used for treating inflammation or pain, was performed for the first time using two different types of geopolymer-based materials, i.e., a metakaolin-based (GMK) and an organic-inorganic hybrid (GMK-S) geopolymer. The proposed adsorbing matrices are characterized by a low environmental footprint and have been easily obtained as powders or as highly porous filters by direct foaming operated directly into the adsorption column. Preliminary results demonstrated that these materials can be effectively used for the removal of ibuprofen from contaminated water (showing a concentration decrease of IBU up to about 29% in batch, while an IBU removal percentage of about 90% has been reached in continuous), thus suggesting their potential practical application.

Preparation of a thiols ß-cyclodextrin/gold nanoparticles-coated open tubular column for capillary electrochromatography enantioseparations.

Inspired by the distinct chemical and physical properties of nanoparticles, here a novel open-tubular capillary electrochromatography column was prepared by electrostatic assembly of poly(diallydimethylammonium chloride) onto the inner surface of a fused-silica capillary, followed by self-adsorption of negatively charged SH-ß-cyclodextrin/gold nanoparticles. The formation of the SH-ß-cyclodextrin/gold nanoparticles coated capillary was confirmed and characterized by scanning electron microscopy and energy dispersive spectrometry. The results of scanning electron microscopy and energy dispersive spectrometry studies indicated that SH-ß-cyclodextrin/gold nanoparticles were successfully coated on the inner wall of the capillary column. The performance of the SH-ß-cyclodextrin/gold nanoparticles coated capillary was validated by the analysis of six pairs of chiral drugs, namely zopiclone, carvedilol, salbutamol, terbutaline sulfate, phenoxybenzamine hydrochloride, and ibuprofen. Satisfactory enantioseparation results were achieved, confirming the use of gold nanoparticles as the support could enhance the phase ratio of the open-tubular capillary column. Additionally, the stability and reproducibility of the SH-ß-cyclodextrin/gold nanoparticles coated capillary column were also investigated. Then, this proposed method was well validated with good linearity (≥0.999), recovery (90.0-93.5%) and repeatability, and was successfully used for enantioseparation of ibuprofen in spiked plasma samples, which indicated the new column's potential usage in biological analysis.

Effect of Spathiphyllum blandum on the removal of ibuprofen and conventional pollutants from polluted river water, in fully saturated constructed wetlands at mesocosm level.

In this study, the effect of Spathiphyllum blandum on the removal of ibuprofen (IB) and conventional pollutants such as chemical oxygen demand (COD), total nitrogen (TN), ammonium (NH4 +-N), total phosphorus (TP), and total suspended solids (TSS) is reported; this, through its use as an emergent vegetation in fully saturated (FS) constructed wetlands (CWs) at mesocosm level treating polluted river water. With the exception of TP and COD, it was found that for TN (12%), NH4 +-N (11%), TSS (19%), and IB (23%), the removals in systems with vegetation were superior to systems without vegetation (p < 0.05). These findings demonstrate the importance of the species S. blandum, in particular, for the removal of ibuprofen, which is an anti-inflammatory drug commonly found in effluents of wastewater treatment plants. Thus, the results obtained provide information that can be used for the design of future efficient large-scale systems using a new ornamental species, mainly under tropical climatic conditions.

Small-Scale Spherical Granulation Using a Planetary Centrifugal Mixer.

A concise spherical granulation method is required to prepare extemporaneously granules remanufactured from oral dosage forms for administration to individuals who cannot swallow tablets or capsules. In this study, we determined the feasibility of spherical granulation using a planetary centrifugal mixer. A model formulation, 20% ibuprofen (IBP) granules, was prepared using a lactose/cornstarch (7 : 3, w/w) mixture or D-mannitol as diluents, and changes in granule characteristics (mean diameter (d50), distribution range of granule size (span), and yield) were evaluated according to the amount of water added and the granulation time. The amount of water was assessed using the plastic limit value as measured using a digital force gauge. We successfully produced granules, and larger amounts of water and longer granulation times resulted in larger d50 values and smaller span values. The optimal granulation time was 45 s and the optimal water contents were 70 and 67.5% of the plastic limit value for the lactose/cornstarch mixture and D-mannitol, respectively. When compared to commercial 20% IBP granules, powder X-ray diffraction and differential scanning calorimetry analyses showed that the granulation process did not alter the crystallinity of the drug. Thus, this novel granulation method using a planetary centrifugal mixer may be a promising technique for compounding in pharmacies and in pharmaceutical manufacturing.

Extraction of Ibuprofen from Natural Waters Using a Covalent Organic Framework.

Ibuprofen is one of the most widely used pharmaceuticals, and due to its inefficient removal by conventional wastewater treatment, it can be found in natural surface waters at high concentrations. Recently, we demonstrated that the TpBD-(CF3)2 covalent organic framework (COF) can adsorb ibuprofen from ultrapure water with high efficiency. Here, we investigate the performance of the COF for the extraction of ibuprofen from natural water samples from a lake, river, and estuary. In general, the complexity of the natural water matrix induced a reduction in the adsorption efficiency of ibuprofen as compared to ultrapure water. The best performance, with over 70% adsorption efficiency, was found in lake water, the sample which featured the lowest pH. According to the theoretical calculations, ibuprofen more favorably interacts with the COF pores in the protonated form, which could partially account for the enhanced adsorption efficiency found in lake water. In addition, we explored the effect of the presence of competing pharmaceuticals, namely, acetaminophen and phenobarbital, on the ibuprofen adsorption as binary mixtures. Acetaminophen and phenobarbital were adsorbed by TpBD-(CF3)2 with low efficiency and their presence led to an increase in ibuprofen adsorption in the binary mixtures. Overall, this study demonstrates that TpBD-(CF3)2 is an efficient adsorbent for the extraction of ibuprofen from natural waters as well.

A nanohybrid composed of polyoxotungstate and graphene oxide for dispersive micro solid-phase extraction of non-steroidal anti-inflammatory drugs prior to their quantitation by HPLC.

A nanohybrid was prepared from polyoxotungstate anion and graphene oxide (POT/GO) and characterized in terms of porosity by applying Fourier transform infrared and transmission electron microscopy. The nanohybrid was applied as a sorbent for the dispersive micro solid-phase extraction of the non-steroidal anti-inflammatory drugs (NSAIDs) ibuprofen, diclofenac, and naproxen. Different types of sorbents were compared, and the POT/GO nanohybrid was found to have the best adsorption affinity. The NSAIDs were quantified via HPLC with UV detection. Under the optimum conditions, the limits of detection (at an S/N ratio of 3) range between 0.02-0.03 ng.mL-1, and the linear response ranges extend from 0.08-200 ng.mL-1, respectively. The relative standard deviations (RSDs) for five replicates at three concentration levels (0.1, 5 and 100 ng.mL-1) of NSAIDs ranged from 4.1 to 6.1%. The applicability of the method was confirmed by analyzing spiked real water samples, and satisfactory results were obtained, with recoveries between 95.6 and 99.6%. Graphical abstract Schematic representation of the polyoxotungstate/graphene oxide nanohybrid preparation.

Hybrid monoliths with metal-organic frameworks in spin columns for extraction of non-steroidal drugs prior to their quantitation by reversed-phase HPLC.

A (glycidyl methacrylate)-co-(ethylene glycol dimethacrylate) polymer (poly(GMA-co-EDMA)) was functionalized with metal-organic frameworks (MOF) and used as a sorbent for solid-phase extraction (SPE). The polymeric sorbent was prepared in-situ by photopolymerization in a previously wall-modified spin column, and then modified with an amino-modified MOF of type NH2-MIL-101(Cr). The sorbents were used for the extraction of nonsteroidal anti-inflammatory drugs (NSAIDs) from human urine samples. The sorbent was compared with the parent monolith and embedded approach, where the MOF particles are admixed in the polymerization mixture before the in-situ polymerization in the modified spin column. SPE is performed by percolating the sample solutions in a centrifuge, which streamlines the SPE steps. The hybrid composites were characterized by scanning electron microscopy and nitrogen intrusion porosimetry. Three NSAIDs (ketoprofen, flurbiprofen, and ibuprofen) were tested. They were eluted from the sorbent with acidified water-acetonitrile mixtures and subsequently analyzed by reversed-phase HPLC with UV detection. The detection limits varied in the range from 0.1 to 7 µg·L-1, and the precisions (relative standard deviation) were <14% in all the cases. The recoveries were between 71.0 and 78.0% in spiked urine samples. Graphical abstractA hybrid monolith modified with amino-modified MOF [named NH2-MIL-101(Cr)] in wall-modified spin columns was prepared. The resulting micro-extraction device was applied to the extraction and preconcentration of non-steroidal anti-inflammatory drugs.

Solid-phase extraction of drugs with cuttlefish bone powder as a sorbent.

We investigated cuttlefish bone powder for the solid-phase extraction of naproxen, ibuprofen, and carbamazepine. The basic principles controlling the extraction are presented to aid in the choice of the nature and quantity of the extracting phase according to the sample matrix and the solute properties, based on the mechanisms of phase retention. Their retention mechanism is based on hydrogen bonding and electrostatic interactions. The results show a significant recovery rate for the three drugs, selectivity, and low cost. The method has successfully reduced the amount of tested pharmaceuticals with recoveries >87% at pH 4.

Biosorption-based dispersive liquid-liquid microextraction combined with polypyrrole-coated magnetic nanoparticles as an effective sorbent for the extraction of ibuprofen from water samples using magnetic solid-phase extraction.

In this paper, biosorption-based dispersive liquid-liquid microextraction (BioDLLME) in combination with magnetic solid-phase extraction (MSPE) has been developed as a sample pretreatment method with high enrichment factor for the sensitive determination of ibuprofen in water samples. At first, magnetic Fe3 O4 /polypyrrole nanoparticles were synthesized and employed as sorbent for the MSPE of ibuprofen. After the elution of the desired compound from the sorbent by using methanol, BioDLLME technique was performed on the obtained solution. After MSPE, the eluent of MSPE was used as the disperser solvent for BioDLLME, so that the extra preconcentration factor could be achieved. The properties of the prepared magnetic sorbent were characterized using field emission scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction methods. Experimental parameters affecting the extraction efficiency were studied and optimized. Under optimum conditions, the enrichment factor was 274. The linear dynamic range and limit of detection are 0.25-80 and 0.083 µg/L, respectively. The relative standard deviations for six replicate measurements are 3.82%.

High-repetition rate laser ablation coupled to dielectric barrier discharge postionization for ambient mass spectrometry.

Most ambient sample introduction and ionization techniques for native mass spectrometry are highly selective for polar agents. To achieve a more general sensitivity for a wider range of target analytes, a novel laser ablation dielectric barrier discharge (LA DBD) ionization scheme was developed. The approach employs a two-step mechanism with subsequent sample desorption and post-ionization. Effective ablation was achieved by the second harmonic output (λ=532nm) of a diode pumped Nd:YVO4 laser operating at a high-repetition rate of several kHz and pulse energies below 100µJ. The ejected analyte-containing aerosol was consecutively vaporized and ionized in the afterglow of a DBD plasma jet. Depending on their proton affinity the superexcited helium species in this afterglow produced analyte ions as protonated and ammoniated species, as well as radical cations. The optimization procedure could corroborate underlying conceptual consideration on the ablation, desorption and ionization mechanisms. A successful detection of a variety of target molecules could be shown from the pharmaceutical ibuprofen, urea, the amino acids l-arginine, l-lysine, the polymer polyethylene glycol, the organometallic compound ferrocene and the technical mixture wild mint oil. For a reliable evaluation of the introduced detection procedure spectra from the naturally abundant alkaloid capsaicin in dried capsicum fruits were recorded.

Single-drop microextraction combined in-line with capillary electrophoresis for the determination of nonsteroidal anti-inflammatory drugs in urine samples.

This study describes a method to determine nonsteroidal anti-inflammatory drugs (NSAIDs) in urine samples based on the use of single-drop microextraction (SDME) in a three-phase design as a preconcentration technique coupled in-line to capillary electrophoresis. Different parameters affecting the extraction efficiency of the SDME process were evaluated (e.g. type of extractant, volume of the microdroplet, and extraction time). The developed method was successfully applied to the analysis of human urine samples with LODs ranging between 1.0 and 2.5 µg/mL for all of the NSAIDs under study. This method shows RSD values ranging from 8.5 to 15.3% in interday analysis. The enrichment factors were calculated, resulting 27-fold for ketoprofen, 14-fold for diclofenac, 12-fold for ibuprofen, and 44-fold naproxen. Samples were analyzed applying the SDME-CE method and the obtained results presented satisfactory recovery values (82-115%). The overall method can be considered a promising approach for the analysis of NSAIDs in urine samples after minimal sample pretreatment.

Ultrasound-assisted magnetic dispersive solid-phase microextraction: A novel approach for the rapid and efficient microextraction of naproxen and ibuprofen employing experimental design with high-performance liquid chromatography.

A simple, rapid, and sensitive method for the determination of naproxen and ibuprofen in complex biological and water matrices (cow milk, human urine, river, and well water samples) has been developed using ultrasound-assisted magnetic dispersive solid-phase microextraction. Magnetic ethylendiamine-functionalized graphene oxide nanocomposite was synthesized and used as a novel adsorbent for the microextraction process and showed great adsorptive ability toward these analytes. Different parameters affecting the microextraction were optimized with the aid of the experimental design approach. A Plackett-Burman screening design was used to study the main variables affecting the microextraction process, and the Box-Behnken optimization design was used to optimize the previously selected variables for extraction of naproxen and ibuprofen. The optimized technique provides good repeatability (relative standard deviations of the intraday precision 3.1 and 3.3, interday precision of 5.6 and 6.1%), linearity (0.1-500 and 0.3-650 ng/mL), low limits of detection (0.03 and 0.1 ng/mL), and a high enrichment factor (168 and 146) for naproxen and ibuprofen, respectively. The proposed method can be successfully applied in routine analysis for determination of naproxen and ibuprofen in cow milk, human urine, and real water samples.

Ibuprofen removal from aqueous solution by in situ electrochemically generated ferrate(VI): proof-of-principle.

The possibility of removing pharmaceuticals from aqueous solutions was examined using ibuprofen (Ibu) oxidation as an example, using in situ electrochemically synthesized ferrate(VI), a strong oxidant and coagulant, with forming of non-harmful byproducts. A solution of ibuprofen of 206 mg/L in 0.1 M phosphate buffer solution was treated with different amounts of fresh, electrochemically synthesized ferrate(VI). The changes of ibuprofen concentration in samples were determined using a UV-Vis spectrophotometer. The extent of mineralization was estimated using the changes in chemical oxygen demand (COD) values and total organic carbon (TOC) values of test samples. The largest reduction of the concentration of Ibu (41.75%) was obtained by adding 69.2 mg/L ferrate(VI) as Fe (Ibu: Fe = 1: 0.34). An effective removal of ibuprofen from aqueous solutions was recorded up to 68% and it can be done by using ferrate(VI) in the ratio Ibu: Fe = 1:3 as Fe. The possibility of ibuprofen removal by ferrate(VI) was confirmed by COD and TOC results, which demonstrated reduction up to 65% and 63.6%, respectively.

Planar Mn4O cluster homochiral metal-organic framework for HPLC separation of pharmaceutically important (±)-ibuprofen racemate.

A planar tetracoordinated oxygen containing a homochiral metal-organic framework (MOF) has been synthesized and characterized that can be used as a new chiral stationary phase in high-performance liquid chromatography to efficiently separate racemates such as pharmaceutically important (±)-ibuprofen and (±)-1-phenyl-1,2-ethanediol.

Parallel artificial liquid membrane extraction of acidic drugs from human plasma.

The new sample preparation concept "Parallel artificial liquid membrane extraction (PALME)" was evaluated for extraction of the acidic drugs ketoprofen, fenoprofen, diclofenac, flurbiprofen, ibuprofen, and gemfibrozil from human plasma samples. Plasma samples (250 µL) were loaded into individual wells in a 96-well donor plate and diluted with HCl to protonate the acidic drugs. The acidic drugs were extracted as protonated species from the individual plasma samples, through corresponding artificial liquid membranes each comprising 2 µL of dihexyl ether, and into corresponding acceptor solutions each comprising 50 µL of 25 mM ammonia solution (pH 10). The liquid membranes and the acceptor solutions were located in a 96-well filter plate, which was sandwiched with the 96-well donor plate during extraction. Parallel extraction of several samples was performed for 15 to 60 min, followed by high-performance liquid chromatography-ultraviolet detection of the individual acceptor solutions. Important PALME parameters including the chemical composition of the liquid membrane, extraction time, and sample pH were optimized, and the extraction performance was evaluated. Except for flurbiprofen, exhaustive extraction was accomplished from plasma. Linearity was obtained for all six drugs in the range 0.025-10 µg/mL, with r (2) values ranging between 0.998 and 1.000. Precision data were in the range 3-22% RSD, and accuracy data were within 72-130% with spiked plasma samples. Based on the current experiences, PALME showed substantial potential for future high-throughput bioanalysis of non-polar acidic drugs.

A three-minute synthesis and purification of ibuprofen: pushing the limits of continuous-flow processing.

In a total residence time of three minutes, ibuprofen was assembled from its elementary building blocks with an average yield of above 90% for each step. A scale-up of this five-stage process (3 bond-forming steps, one work-up, and one in-line liquid-liquid separation) provided ibuprofen at a rate of 8.09 g h(-1) (equivalent to 70.8 kg y(-1)) using a system with an overall footprint of half the size of a standard laboratory fume hood. Aside from the high throughput, several other aspects of this synthesis expand the capabilities of continuous-flow processing, including a Friedel-Crafts acylation run under neat conditions and promoted by AlCl3, an exothermic in-line quench of high concentrations of precipitation-prone AlCl3, liquid-liquid separations run at or above 200 psi to provide solvent-free product, and the use of highly aggressive oxidants, such as iodine monochloride. The use of simple, inexpensive, and readily available reagents thus affords a practical synthesis of this important generic pharmaceutical.

High-performance liquid chromatographic enantioseparation of racemic drugs based on homochiral metal-organic framework.

Homochiral metal-organic frameworks with fine-tuned pore sizes/walls and large surface areas are promising porous materials for enantioseparation considering the traditional zeolite molecular sieves have no chirality. Using enantiopure pyridyl-functionalized salen [(N-(4-Pyridylmethyl)-L-leucine·HBr)] as a starting material, we have prepared a noninterpenetrated three-dimensional homochiral metal organic framework {[ZnLBr]·H2O}n, which was further used as a chiral stationary phase for high-performance liquid chromatography to enantioseparate racemic drugs, showing excellent performances in enantioseparation of drugs. The metal-organic framework can be regarded as a novel molecular sieve-like material with a chiral separation function based on the relative sizes of the chiral channels and the resolved molecules.

Removal performance and mechanism of ibuprofen from water by catalytic ozonation using sludge-corncob activated carbon as catalyst.

To discover the catalytic activity of sludge-corncob activated carbon in catalytic ozonation of Ibuprofen, the performance of sludge-corncob activated carbon and three selected commercial activated carbons as catalysts in catalytic ozonation was investigated. The observation indicates the degradation rate of Ibuprofen increases significantly in the presence of sludge-corncob activated carbon and the catalytic activity of sludge-corncob activated carbon is much higher than that of the other three commercial activated carbons. Ibuprofen's removal rate follows pseudo-first order kinetics model well. It is also found that the adsorption removal of Ibuprofen by sludge-corncob activated carbon is less than 30% after 40 min. And the removal efficiency of Ibuprofen in the hybrid ozone/sludge-corncob activated carbon system is higher than the sum of sludge-corncob activated carbon adsorption and ozonation alone, which is a supportive evidence for catalytic reaction. In addition, the results of radical scavenger experiments demonstrate that catalytic ozonation of Ibuprofen by sludge-corncob activated carbon follows a hydroxyl radical reaction pathway. During ozonation of Ibuprofen in the presence of activated carbon, ozone could be catalytically decomposed to form hydrogen peroxide, which can promote the formation of hydroxyl radical. The maximum amount of hydrogen peroxide occurs in the presence of sludge-corncob activated carbon, which can explain why sludge-corncob activated carbon has the best catalytic activity among four different activated carbons.

Optimization of naproxen and ibuprofen removal in photolysis using a Box-Behnken design: effect of Fe(III), NO3-, and humic acid.

This study investigated the roles and optimum conditions of four independent variables [ultraviolet (UV) intensity, Fe(III), NO3 (-), and humic acid (HA) concentration] in the photolytic removal of naproxen (NPX) and ibuprofen (IBP) in water using a response surface method based on the Box-Behnken design. Lab-scale experiments used analysis of variance and t-test statistics to test the significance of independent variables and their interactions. Predicted levels of NPX and IBP removals were found to be in good agreement with experimental levels (R(2) = 0.9891 for NPX and 0.9936 for IBP). UV intensity and HA were the most positively and negatively significant variables (P < 0.001), respectively. However, Fe(III) and NO3 (-) ions had a less significant impact (P > 0.05). This result implies that NPX was removed by both direct photolysis (photons) and indirect reaction (OH radical), while IBP was removed mainly by the OH radical. NPX was more susceptible to the OH radical than IBP (kOH/NPX = 8.24 × 10(9) M(-1)s(-1) and kOH/IBP = 7.51 × 10(9) M(-1)s(-1)). According to a quadratic regression model, the predicted maximum removal efficiencies for NPX and IBP were 71.66% and 63.58% when the predicted optimum ratio of UV (mW cm(-2)):Fe(III) (mg/L):NO3(-) (mg/L):HA (mg/L) was 6.3:0.94:0:0 and 6.3:0.94:20:0, respectively, which was similar to the respective experimental NPX and IBP removal values of 70.21% and 62.16%. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of Environmental Science and Health, Part A, to view the supplemental file.