Evaluation of initial pH and urea hydrogen peroxide (UHP) co-pretreatment on waste-activated sludge.

Wastewater treatment and conversion into renewable energy sources have been of great interest in recent times due to growing environmental pollution concerns and need for sustainable energy sources. Sewage sludge treatment can convert sludge into renewable energy. In this study, the impact of initial pH and urea hydrogen peroxide (UHP) co-pretreatment on sludge hydrolysis and anaerobic digestion was investigated. The pH of sludge was initially adjusted to 7, 9, and 11 before the addition of 8 mmol/g VS UHP. Under 24 h pretreatment, alkaline medium and UHP effectively enhanced sludge solubilization and hydrolysis. The combination of chemical, sonication, and centrifugation improved the extraction of extracellular polymerase substances released in soluble state. Secondly, anaerobic digestion was performed for 11 days to determine the influence of a lower mesophilic temperature (20 °C) and retention time on the pretreated sludge. The highest NH4+-N concentration of 5.32 g/L was recorded in pH 7+UHP. The most significant total VFA concentration of 13.1 g COD/L was observed in pH 7+UHP on day 9. Acetic acid, isovaleric acid and propionic acid accounted for 80%-83% of the total VFA composition in all pretreated reactors. Lower mesophilic temperature efficiently optimized UHP and VFA production in the pretreated reactors. Microbial metabolism was stabilized under a longer retention time. Alkaline pH and longer retention time elevated NH4+-N and VFA concentration. The results showed that initial pH and UHP co-pretreatment of waste activated sludge offer an alternative pathway for enhancing sludge hydrolysis and VFA production applicable in sludge treatment.

Influence of dental bleaching on the pulp tissue: A systematic review of in vivo studies.

BACKGROUND: Although several studies indicate the harmful effects of bleaching on pulp tissue, the demand for this procedure using high concentrations of hydrogen peroxide (HP) is high. OBJECTIVES: To investigate the influence of bleaching on the pulp tissue. METHODS: Electronic searches were conducted (PubMed/MEDLINE, Scopus, Cochrane Library and grey literature) until February 2021. Only in vivo studies that evaluated the effects of HP and/or carbamide peroxide (CP) bleaching gels on the inflammatory response in the pulp tissue compared with a non-bleached group were included. Risk of bias was performed according to a modified Methodological Index for Non-Randomized Studies scale for human studies and the Systematic Review Centre for Laboratory Animal Experimentation's RoB tool for animal studies. Meta-analysis was unfeasible. RESULTS: Of the 1311 studies, 30 were eligible. Of these, 18 studies evaluated the inflammatory response in animal models. All these studies reported a moderate-to-strong inflammatory response in the superficial regions of pulp, characterized by cell disorganization and necrotic areas, particularly during the initial periods following exposure to 35%-38% HP, for 30-40 min. In the evaluation of human teeth across 11 studies, seven investigated inflammatory responses, with five observing significant inflammation in the pulp of bleached teeth. In terms of tertiary dentine deposition, 11 out of 12 studies noted its occurrence after bleaching with 35%-38% HP in long-term assessments. Additionally, three studies reported significant levels of osteocalcin/osteopontin at 2 or 10 days post-treatment. Other studies indicated an increase in pro-inflammatory cytokines ranging from immediately up to 10 days after bleaching. Studies using humans' teeth had a low risk of bias, whereas animal studies had a high risk of bias. DISCUSSION: Despite the heterogeneity in bleaching protocols among studies, High-concentrations of HP shows the potential to induce significant pulp damage. CONCLUSIONS: High-concentrations of bleaching gel increases inflammatory response and necrosis in the pulp tissue at short periods after bleaching, mainly in rat molars and in human incisors, in addition to greater hard tissue deposition over time. However, further well-described histological studies with long-term follow-up are encouraged due to the methodological limitations of these studies. REGISTRATION: PROSPERO (CRD42021230937).

At-home bleaching with carbamide peroxide with concentrations below 10%: bleaching efficacy and permeability in the pulp chamber.

OBJECTIVES: To evaluate the bleaching efficacy and permeability of hydrogen peroxide (HP) in the pulp chamber of human teeth bleached with lower concentrations of carbamide peroxide gel (4%, 5% and 7% CP). MATERIALS AND METHODS: Bleaching gels with lower concentrations were formulated and a commercial standard gel, 10% CP, was used as a reference. Fifty-six human premolars were randomly divided into four groups. Applications of the bleaching gel were made for 3 h for 21 days. The bleaching efficacy was evaluated by digital spectrophotometry on 1, 7, 14 and 21 days, with analysis in the ∆Eab, ∆E00 and WID color spaces. The concentration of HP in the pulp chamber was measured in the same periods by UV-Vis spectrophotometry (µg/mL). Two-way repeated analysis of variance (ANOVA) examined bleaching efficacy and HP permeability, followed by Tukey's post-hoc test (α = 0.05). RESULTS: All groups showed significant color changes, with no statistical differences after the second and third week of bleaching (p > 0.05). The 'time' factor was statistically different (p < 0.05), increasing the bleaching efficacy throughout the treatment. The 4% CP group had lower HP levels in the pulp chamber (p < 0.05). CONCLUSIONS: The results seem promising, revealing that low concentration gels are as effective as 10% CP with the benefit of reducing the amount of HP in the pulp chamber. CLINICAL RELEVANCE: Low concentration 4% PC and 5% PC maintains bleaching efficacy, reduces the penetration of HP peroxide into the pulp chamber, and may reduce tooth sensitivity.

Assessment of color changes and adverse effects of over-the-counter bleaching protocols: a systematic review and network meta-analysis.

OBJECTIVES: To assess color change efficacy and the adverse effects of varied over-the-counter (OTC) bleaching protocols. METHODOLOGY: The study included randomized clinical trials evaluating color changes from OTC bleaching agents. Nine databases were searched, including the partial capture of the grey literature. The RoB2 tool analyzed the individual risk of bias in the studies. Frequentist network meta-analyses compared treatments through common comparators (∆Eab* and ∆SGU color changes, and tooth sensitivity), integrating direct and indirect estimates and using the mean and risk differences as effect measures with respective 95% confidence intervals. The GRADE approach assessed the certainty of the evidence. RESULTS: Overall, 37 remaining studies constituted the qualitative analysis, and ten composed the meta-analyses. The total sample included 1,932 individuals. ∆Eab* was significantly higher in groups 6% hydrogen peroxide (HP) strips (≥ 14 h). ∆SGU was significantly higher in groups at-home 10% carbamide peroxide (CP) (≥ 14 h), followed by 6% HP strips (≥ 14 h) and 3% HP strips (≥ 14 h). At-home 10% CP (7-13 h) and placebo showed lower risks of tooth sensitivity without significant differences between these treatments. CONCLUSION: Considering the low level of evidence, OTC products presented satisfactory short-term effects on tooth bleaching compared to the placebo, with little to no impact on dentin hypersensitivity and gingival irritation. CLINICAL RELEVANCE: OTC products are proving to be practical alternatives for tooth whitening. However, patients should be advised about the possible risks of carrying out such procedures without professional supervision.

Whitening toothpastes with hydrogen peroxide concentrations vs. at-home bleaching.

OBJECTIVES: To evaluate the effect of whitening toothpastes with different hydrogen peroxide (HP) concentrations on HP permeability, color change, and physicochemical properties, compared to at-home bleaching treatment. MATERIALS AND METHODS: Forty-nine premolars were randomized into seven groups (n = 7): untreated (control); at-home bleaching with 10% carbamide peroxide gel (AH; 10% CP) with 14 and 28 applications of 180 min each (AH [14 × 180 min] and AH [28 × 180 min]); three whitening toothpastes (3% HP; 4% HP and 5% HP) and 10% CP brushed 28 times for 90 s each (TB [28 × 90 s]). HP permeability was measured using a UV-VIS spectrophotometer and color change by a digital spectrophotometer (ΔEab, ΔE00, and ΔWID). Initial concentration, pH, and viscosity were measured through titration, digital pH meter, and rheometer, respectively. Statistical analysis included one-way ANOVA, Tukey's test, and Dunnett's test (α = 0.05). RESULTS: 4% HP group showed acidic pH, the lowest viscosity and the highest HP concentration into the pulp chamber (p < 0.05). The 10% CP groups had lower HP in the pulp chamber and greater color change than other groups (p < 0.05), except the 5% HP group in ΔEab and ΔE00. For ΔWID, the 10% CP AH groups showed greater whitening than other groups (p < 0.05). CONCLUSIONS: Whitening toothpaste with up to 5% HP resulted in higher HP permeability and less color change compared to 10% CP. Higher HP commercial concentrations in toothpaste increased whitening effect; however, acidic pH toothpastes exhibited greater HP permeability. CLINICAL RELEVANCE: Whitening toothpastes with high hydrogen peroxide concentrations were less effective than at-home bleaching, resulting in less color change and greater permeability of hydrogen peroxide, potentially increasing the risk of tooth sensitivity.

Effectiveness of desensitizing toothpastes in reducing tooth sensitivity after tooth bleaching: a systematic review.

OBJECTIVE: To evaluate the effectiveness of desensitizing toothpastes in reducing post-bleaching tooth sensitivity. MATERIALS AND METHODS: A systematic review of randomized clinical trials was conducted based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses checklist. Electronic searches were conducted in the PubMed/MEDLINE, Scopus, Web of Science, The Cochrane Library and Embase databases, using the following terms: (dentifrices OR toothpaste) AND (sensitive OR sensitivity OR dental sensitivity) AND (dental bleaching OR tooth bleaching OR dental whitening OR tooth whitening). RESULTS: Five studies involving 387 individuals undergoing in-office or at-home teeth bleaching were reviewed. Desensitizing toothpastes reduced sensitivity effectively after home bleaching with 22% carbamide peroxide and single-session in-office bleaching with 35% hydrogen peroxide. However, they were ineffective for home bleaching with 16% carbamide peroxide and in-office bleaching across two sessions with 35% or 38% hydrogen peroxide. CONCLUSION: Desensitizing toothpastes are effective for home bleaching with high concentration carbamide peroxide and single-session in-office bleaching with highly concentrated hydrogen peroxide, but ineffective for home bleaching with low concentration carbamide peroxide and two-session in-office bleaching with concentrated hydrogen peroxide.

Effect of fluoride or chitosan toothpaste and at-home bleaching in enamel roughness, tooth color, and staining susceptibility.

PURPOSE: To evaluate how fluoride- or chitosan-based toothpaste used during at-home bleaching affects enamel roughness, tooth color, and staining susceptibility. METHODS: Bovine enamel blocks were submitted to a 14-day cycling regime considering a factorial design (bleaching agent x toothpaste, 2 x 3), with n=10: (1) bleaching with 16% carbamide peroxide (CP) or 6% hydrogen peroxide (HP), and (2) daily exposure of a fluoride (1,450 ppm F-NaF) toothpaste (FT), chitosan-based toothpaste (CBT), or distilled water (control). Then, 24 hours after the last day of bleaching procedure the samples were exposed to a coffee solution. Color (ΔEab, ΔE00, L*, a*, b*) and roughness (Ra, µm) analyses were performed to compare the samples initially (baseline), after bleaching, and after coffee staining. The results were evaluated by linear models for repeated measures (L*, a*, b*, and Ra), 2-way ANOVA (ΔEab, ΔE00) and Tukey's test (α= 0.05). RESULTS: After the at-home bleaching procedure (toothpaste vs. time, P< 0.0001), the toothpaste groups presented a statistically lower Ra than the control (CBT 0.05). After coffee exposure, CBT presented lower ΔEab and ΔE00 values in the HP groups (toothpaste, P< 0.0001), and lower b* and a* values in the CP groups (toothpaste vs. time, P= 0.004). CLINICAL SIGNIFICANCE: Fluoride or chitosan delivered by toothpaste can reduce surface alterations of the enamel during at-home bleaching, without affecting bleaching efficacy.

Effect of incorporation of calcium polyphosphate sub-microparticles in low-concentration bleaching gels on physical properties of dental enamel.

AIM: To evaluate the bleaching efficacy and effects on enamel properties of experimental gels with carbamide peroxide (CP; 10%) or hydrogen peroxide (HP; 6%) containing calcium polyphosphate sub-microparticles (CaPPs). METHODS: A total of 216 bovine tooth specimens were divided for microhardness and color analyses (n = 108) and block randomized into nine groups (n = 12): (G1) commercial CP (Whiteness Perfect, FGM; Brazil); (G2) experimental CP; (G3) CP-0.5%CaPPs; (G4) CP-1.5%CaPPs; (G5) commercial HP (Potenza Bianco, PHS; Brazil); (G6) experimental HP; (G7) HP-0.5%CaPPs; (G8) HP-1.5%CaPPs; (G9) artificial saliva. The gels' pH values were determined with a bench pH meter. Color (ΔE, ΔE00, ΔWID) and microhardness variation were evaluated before and after the therapy. Part of the specimens used for microhardness was submitted to the scanning electron microscopy (SEM) (n = 3) and energy-dispersive X-ray spectroscopy EDX (n = 3) analyses. Statistical analyses were performed in the R statistical software (α = 0.05). Linear mixed models for repeated measures in time were used to analyze microhardness and L* values. Generalized linear models were used to analyze the a*, b*, ΔE, ΔE00, and ΔWID, considering a group effect. The EDX data were analyzed using a one-way ANOVA with Tukey's test. RESULTS: The gels' pH remained over 6,0. All gels effectively bleached the specimens and did not differ significantly. When compared to the control group, the hardness was significantly lower in the G1, G2, G6, and G7 groups. The G3, G4, G5, and G8 groups did not differ significantly (p > 0.05). CONCLUSION: The incorporation of CaPPs in low-concentration whitening gels reduces its negative effects on microhardness without interfering with their bleaching efficacy.

Effect of carbamide peroxide treatment on the ion release of different dental restorative materials.

BACKGROUND: To predict the long-term performance of restorative materials in the oral environment, it is important to evaluate their resistance to chemical and mechanical degradation and to know the toxic potential of the type and amount of ions eluted from the filling material. In this study, home bleaching was applied to dental materials with different contents and it was aimed to determine the type and amount of ions released from these materials. METHODS: In this study, amalgam, posterior composite resin, anterior composite resin, bulk fill composite resin, indirect composite resin, hybrid ceramic and all-ceramic were used as restorative materials. 10 specimens of each material were prepared according to the manufacturer's instructions. Each material group was divided into two subgroups as the bleached group and the control group. After bleaching, all specimens were stored in 1 ml of 75% ethanol/water solution. Solutions were renewed after 1, 14 and 28 days. The type and amount of ions released from the materials were determined using Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). Data were analyzed using the Friedman, Wilcoxon Signed Ranks, and Mann-Whitney U tests (α = 0.05). RESULTS: It was determined that the amount of ions release from the restorative materials decreased over time (p < 0.05). According to the results of the Mann-Whitney U test, there was no difference between the bleaching and control groups in most of the restorative materials (p > 0.05). CONCLUSION: Within the limits of this study, home bleaching system does not have a significant effect on ion release from restorative materials.

Comparison of various methods of restoring adhesion to recently bleached enamel.

AIM: This study compared the effectiveness of several techniques in restoring compromised bonding to recently bleached enamel. METHODS: Seventy-five healthy bovine incisors were divided into five groups (n = 15). Fifteen teeth (Group 1) remained intact, whereas 60 (Groups 2 to 5) underwent at-home bleaching with 16% carbamide peroxide. The bonding procedures were as follows: Group 1: Bonding of resin composite to unbleached enamel; Group 2: Bonding immediately after bleaching; Group 3: Application of a 10% sodium ascorbate solution for 10 min before bonding; Group 4: Enamel removal to the depth of 0.5 mm; and Group 5: Increased curing time of the bonding agent to 80 instead of 20 s. After 24 h, the specimens were subjected to micro-shear testing, and the failure mode was determined. RESULTS: ANOVA revealed a significant difference in bond strength among the groups (P < 0.001). The mean bond strength was significantly lower in group 2 than in other groups (P < 0.05), which showed comparable bond strength to each other (P > 0.05). Adhesive failure was the most predominant failure type in all groups. The mixed failure occurred with a frequency of 26.7% in groups 3 and 5. The Fisher's exact test revealed a significant difference in failure modes among the groups (P = 0.047). CONCLUSIONS: The three experimental procedures used in this study, including the application of 10% sodium ascorbate before bonding, enamel removal to the depth of 0.5 mm, and increasing the curing time of the bonding agent to 80 s, were effective in restoring the compromised bonding to recently bleached enamel.

Development of an Efficient On-Tissue Epoxidation Reaction Mediated by Urea Hydrogen Peroxide for MALDI MS/MS Imaging of Lipid C═C Location Isomers.

Unsaturated lipids containing different numbers and locations of C═C bonds are significantly associated with a variety of cellular and metabolic functions. Although matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) has been used to visualize the spatial distribution patterns of various lipids in biological tissues, in situ identification, discrimination, and visualization of lipid C═C location isomers remain challenging. Herein, an efficient and fast on-tissue chemical derivatization (OTCD) approach was developed to pinpoint the locations of C═C bonds in complex lipids in situ via methyltrioxorhenium (MTO)-catalyzed epoxidation of C═C with a urea hydrogen peroxide (UHP)/hexafluoroisopropanol (HFIP) system. The efficiency of OTCD could reach 100% via one-step spray deposition of the solution mixture of MTO/UHP/HFIP at room temperature. The developed OTCD method provided rich structural information on lipid C═C location isomers, and their accurate spatial distribution patterns were resolved in mouse brain tissues. Tissue-specific distributions and changes of lipid C═C location isomers in the liver sections of obese ob/ob and diabetic db/db mice were further investigated, and their correlation in two animal models was revealed. The simplicity and high efficiency of the OTCD method developed for MALDI tandem MSI of lipid C═C location isomers possess great potential for functional spatial lipidomics.

Chemical behavior of 20%-22% carbamide peroxide gels in at-home bleaching: Randomized crossover in situ trial.

OBJECTIVE: To evaluate if distinct 20%-22% carbamide peroxide bleaching gels present similar decomposition pattern and pH during the clinical use in both arches, as well as gels viscosity. METHODS: Participants randomly received treatments with carbamide peroxide gels (n = 10): OPF (OpalescencePF-20%); PNT (Polanight-22%); and WPC (Whiteness Perfect-22%) in three different days, with 2-day washout. Decomposition pattern was assessed by peroxide concentration. Both PC and pH of bleaching gels were measured in different time points in upper and lower trays during a total of 120 min of clinical use. Viscosity of bleaching gels was measured in triplicate. ANOVA and Tukey's test were applied (α = 0.05). RESULTS: Regarding decomposition pattern, no significant differences were observed for the interaction between gel, time, and tray position factors. The peroxide concentration progressively reduced until 120 min of trays use (p < 0.001), being overall more notable in lower trays (p < 0.001). Regarding pH, the lowest values were verified in WPC within time. At 120 min, an increase of pH was observed for both WPC and OPF (p < 0.001) compared to baseline means. PNT exhibited constant pH values over time. The values of viscosity were: OPF (1.682.000 ± 19 cP)a, WPC (1.388.667 ± 172.63 cP)ab, PNT (579.567 ± 0.98 cP)b. CONCLUSIONS: The bleaching gels presented overall decomposition pattern clinically equivalent, being more notable in lower trays over time. Nevertheless, distinct pH and viscosities were observed among the products. CLINICAL SIGNIFICANCE: Although the manufacturers recommend different times of use for bleaching gels with similar peroxide concentrations, the commercial products tested did not exhibit clinically relevant difference in the decomposition pattern during the 120 min of clinical procedure.

In vitro assessment of activated charcoal-based dental products.

OBJECTIVE: Assess the effects of activated charcoal-based products on whitening and changes on dental enamel surface. MATERIAL AND METHODS: Fifty-two blocks of bovine dental enamel were randomly distributed in four groups (n = 13): brushing with activated charcoal-based powder (PW); brushing with activated charcoal-based dentifrice (AC); brushing with a conventional dentifrice containing 1450 ppm of fluoride (CD); and whitening with 10% carbamide peroxide (CP). Color, microhardness, and surface alteration were analyzed at baseline and after 14 days of treatment. Three samples per group were randomly selected and examined using scanning electron microscopy (SEM) to analyze the morphology. RESULTS: PW exhibited greater color change for the ΔE00 , ΔWID, Δb* and ΔL* parameters than other groups (p < 0.05). After treatment, microhardness decreased in AC and CP groups (p < 0.05). Also, PW and AC groups showed more surface alteration than CD and CP (p < 0.001). Changes in the morphology of dental enamel were observed by SEM in PW and AC groups. CONCLUSION: Activated charcoal-based products showed a lower whitening effect than 10% carbamide peroxide. These products also influenced dental enamel microhardness, resulting in greater surface alteration. CLINICAL SIGNIFICANCE: Activated charcoal-based products promoted minimum whitening effects with significant enamel surface alteration. The 10% carbamide peroxide was more effective for whitening and caused slight enamel surface alteration.

Synthesis, Characterization, and Investigation of Novel Ionic Liquid-Based Tooth Bleaching Gels: A Step towards Safer and Cost-Effective Cosmetic Dentistry.

The objective of this study was to synthesize a novel choline hydroxide ionic liquid-based tooth bleaching gel. Ionic liquid-based gels were synthesized and characterized using FTIR along with pH testing. Tooth sample preparation was carried out in line with ISO 28399:2020. The effects of synthesized gels on tooth samples were tested. Tooth samples were stained and grouped into three experimental groups: EAI (22% choline hydroxide gel), EAII (44% choline hydroxide gel), and EB (choline citrate gel) and two control groups: CA (commercial at-home 16% carbamide peroxide gel) and CB (deionized water). The tooth color analysis, which included shade matching with the Vitapan shade guide (n = 2), and digital colorimetric analysis (n = 2) were evaluated. The surface characteristics and hardness were analyzed with 3D optical profilometry, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), and Microhardness testing (n = 3), respectively. The tooth color analysis (Vitapan shade guide) revealed that all the tooth samples treated with synthesized choline citrate gel (EB) showed an A1 shade as compared to the other four groups, giving a range of shades. An analysis of the ΔE values from digital colorimetry; EAI, EAII, CA, and CB showed ΔE values in a range that was clinically perceptible at a glance. However, EB showed the highest value of ΔE. The mean microhardness values for the five groups showed that the effects of three experimental gels i.e., 44% choline hydroxide, 22% choline hydroxide, and choline citrate, on the microhardness of the tooth samples were similar to that of the positive control, which comprised commercial at-home 16% carbamide peroxide gel. SEM with EDX of three tested subgroups was closely related in surface profile, elemental composition, and Ca/P ratio. The roughness average values from optical profilometry of four tested subgroups lie within approximately a similar range, showing a statistically insignificant difference (p > 0.05) between the tested subgroups. The synthesized novel experimental tooth bleaching gels displayed similar tooth bleaching actions without any deleterious effects on the surface characteristics and microhardness of the treated tooth samples when compared with the commercial at-home tooth bleaching gel.

Effects of Dental Bleaching Agents on the Surface Roughness of Dental Restoration Materials.

Background and Objectives: This study aimed to evaluate the surface roughness evolution of several finished and polished composites when bleaching materials are applied. The research was conducted on four microhybrid or nanofilled composites that are used in dental restorations. Materials and Methods: For each composite type, 5 samples were selected for control, 5 samples were subjected to the bleaching protocol "office bleach" with 40% hydrogen peroxide, and 5 other samples were subjected to the "home bleach" protocol with 16% carbamide peroxide, resulting in a total number of 60 samples. The surfaces of all the samples were tested for roughness, and the values of the most relevant parameter (Ra), were collected. Comparisons between composites and samples were performed using one-way ANOVA (in Statistical Package for Social Sciences). Results: After the bleaching protocol with 40% hydrogen peroxide gel, it was found that the roughness of the group increased considerably compared to the control group, so the highest roughness was found at GC Gradia direct anterior group, and the lowest value was registered for the 3M ESPE Valux Plus group. Following the bleaching protocol with 16% carbamide peroxide (home bleach), it was noted that the sample surfaces were not as affected. In this case, the lowest roughness was found at 3M ESPE Valux Plus group, and the highest roughness was registered for the GC G-aenial anterior group. Following the interpretation of the results, all four types of dental composites tested showed significant surface roughness differences between the groups subjected to bleaching protocols and those kept as control (p < 0.05). Conclusions: The surfaces of the samples were affected by the bleaching protocols by increasing the roughness compared to the control samples.

EFFECTS OF PROFESSIONAL ORAL HYGIENE AND TEETH WHITENING ON THE MICROELEMENT COMPOSITION OF ENAMEL.

OBJECTIVE: Aim: The objective of this study is to investigate the impact of professional teeth cleaning and the substances used in modern dentistry for whitening on the microelement composition of tooth enamel. PATIENTS AND METHODS: Materials and Methods: To study the morphology and microelement composition of the enamel, scanning electron microscopy was performed using the MiraLM microscope equipped with a Schottky field emission electron gun from Tescan. RESULTS: Results: A comparative analysis between the areas subjected to mechanical cleaning and those where it was not applied revealed a significant difference in the research results, particularly in carbon, which changed from 25.16±1.04 to 32.02±1.8. An analysis of the enamel's chemical composition before and after whitening revealed a decrease in carbon from 45.91±1.20 to 42.46±1.74. The change in phosphorus content was determined to be from 9.77±0.39 to 9.56±0.75. A decrease in calcium from 15.96±0.64 to 15.21±1.22 and magnesium from 0.07±0.01 to 0.01±0.01 was also observed. CONCLUSION: Conclusions: Professional dental hygiene does not have a direct impact on the microelement composition of enamel, such as the levels of calcium, phosphorus, fluoride, and other microelements. However, it can have an indirect and temporary influence due to the use of abrasive materials that affect dental deposits, pellicle, and the surface layer of enamel. Teeth whitening can affect the microelement composition of enamel, but these changes are mostly temporary and associated with processes of demineralization/ remineralization and oxygenation.

Impact of different intraorifice barriers on fracture resistance of non-vital bleached teeth.

Background and Aim: This study aimed to evaluate the effects of bleaching agents on the fracture resistance of endodontically treated teeth using different intraorifice barrier (IOB) materials. Materials and Methods: The endodontic treatment was performed for 160 mandibular premolars, and then, the teeth were divided into four groups according to the IOB: Ionoseal, Biodentine, ProRoot MTA, and TheraBase. Then, these teeth were subdivided into four subgroups (n = 10) based on the bleaching agents as distilled water (control), hydrogen peroxide 35% (HP), sodium perborate (SP), and carbamide peroxide 37% (CP). The access cavities were restored with composite resin after applying the bleaching agents for 7 days. The fracture resistance test was performed using a universal testing machine. Data were statistically analyzed, and the significance level was set at 5%. A scanning electron microscope was used to evaluate the effect of bleaching agents on the surfaces of IOBs. Results: The highest fracture resistance values were observed in Biodentine groups with significant differences compared to Ionoseal and ProRoot MTA (P <.05). The distilled water groups showed significantly the highest fracture resistance compared to SP and HP groups (P <.05). There was no significant difference between SP, HP, and CP groups (P >.05). It was demonstrated that the morphological surface of the intact IOBs (control) was different from the surface of IOBs treated with bleaching agents. Conclusion: The intracoronal bleaching procedures affected negatively the fracture resistance of the endodontically treated teeth.

Urea hydrogen peroxide-initiated synthesis of pyranopyrazoles through oxidative coupling under base- and metal-free conditions by physical grinding method.

A novel multicomponent one-pot expeditious synthesis of highly functionalized and pharmaceutically fascinated pyranopyrazoles has been developed. This reaction occurs via tandem Knoevenagel condensation reaction of methyl aryl derivatives, 3-methyl pyrazolone and malononitrile in the presence of urea hydrogen peroxide under the physical grinding method. The present methodology offers several benefits such as available green and cheap starting materials, solvent-free, mild reaction conditions, high atom economy, eco-friendly standards, excellent yields and easy isolation of the products without column chromatographic separation.

In vivo evaluation of whitening toothpaste efficiency and patient treatment satisfaction: a randomized controlled trial.

OBJECTIVES: To assess the whitening efficiency and patient satisfaction after usage of commercially available toothpastes with the different whitening ingredients. MATERIALS AND METHODS: This randomized controlled trial study comprised 161 participants who were randomly divided into eight groups based on used whitening or control/conventional toothpaste (Colgate Max Expert White [CMEW], n = 20; Signal Daily White [SDW], n = 20; Himalaya Sparkly White Herbalis [HSWH], n = 20; Signal White System [SWS], n = 20; Rembrandt Deeply White + Peroxide [RDWP], n = 20; Splat Extreme White [SEW], n = 20; Splat White Plus [SWP], n = 21; and Kalodont Multi Repair [control], n = 20). Tooth color and color change were evaluated using a spectrophotometer (CIELAB coordinates, ΔEab*, ΔE00, whiteness index change [ΔWID]). Measurements were performed at baseline, 30 days and 60 days after the beginning of treatment, and 30 days after completing treatment - follow-up. Side effects and satisfaction with the whitening outcome were reported throughout the questionnaire. RESULTS: The results for ΔL*, Δa*, and Δb* showed an increase in lightness and decrease in yellowness for all tested whitening toothpastes compared to the control group after 30 days of use (p ≤ 0.05). Also, significant tooth color difference (ΔEab*, ΔE00) and whiteness index change (ΔWID) were recorded for all tested whitening toothpastes 30 days and 60 days from the beginning of use (p ≤ 0.05). Toothpaste containing a combination of urea peroxide and enzyme ingredients (SEW) demonstrated the highest and the longest whitening effect. CONCLUSIONS: Whitening toothpastes can show perceptibly whitening effect after a short time of usage, but without a long-lasting impact. CLINICAL RELEVANCE: Toothpaste containing a combination of enzymes and peroxides showed the best whitening performance compared to those containing only enzymes, peroxides, or abrasives. TRIAL REGISTRATION: ClinicalTrials.gov: NCT04460755.

Bleaching efficacy and quality of life of different bleaching techniques - randomized controlled trial.

OBJECTIVES: To evaluate bleaching efficacy and oral health-related quality of life (ORHQoL) of three bleaching systems with similar hydrogen peroxide (HP) concentration for up to 6 months post-treatment. MATERIALS AND METHODS: A randomized controlled trial was designed with three parallel groups: group A - in-office 6% HP paint-on varnish; group B - at-home 6% HP with adaptable tray; group C - at-home 16% carbamide peroxide with custom tray. At three different stages (baseline, after bleaching, and 6-month follow-up), ORHQoL was evaluated by the OHIP-14 questionnaire and tooth color of the upper canines and central incisors were measured by two shade guides and a spectrophotometer (measuring CIE L*a*b* with respective color/whiteness differences - ΔE00/ΔWID). Results were presented as mean and 95% confidence intervals and statistical tests were performed appropriately, considering a significance level of α = 0.05. RESULTS: All groups presented significant color differences (P < 0.05) between all stages, with ΔE00/ΔWID surpassing the perceptibility threshold in 98% cases, with group C's results being significantly (P < 0.05) higher when compared to other groups, although with significantly (P < 0.05) higher values of color relapse. Significative ORHQoL improvements (P < 0.05) were detected after bleaching in a global analysis with no differences between techniques. CONCLUSIONS: All techniques presented bleaching efficacy, color stability, and improvements in ORHQoL up to 6 months post-treatment. CLINICAL SIGNIFICANCE: Clinicians may consider both at-home and in-office bleaching techniques with 6% HP to attain long-lasting satisfactory clinical results while producing positive changes in ORHQoL.