RESUMEN
Emission from crystalline organic solids is often quenched by nonemissive energy-transfer deexcitation processes. While dispersion of fluorophores in polymers or other hosts has been used to enhance the emission intensity, this strategy results in randomization of guest orientation and optical losses at grain boundaries. Here, we report the doping of inherently nonemissive single crystals of anilinium bromide with three fluorescent organic molecules. The doping process equips the crystal with emission characteristics that tune from blue to deep orange. The emission intensity can be reversibly modulated by ferroelastic twinning, which causes the material to function as a multiemissive force sensor. This approach opens up new pathways in the manipulation of emissive properties in organic crystals and may have substantial implications for optoelectronic devices and sensors.
RESUMEN
The dense and ordered molecular arrangements endow dynamic molecular crystals with fast response, rapid energy conversion, low energy dissipation, and strong coupling between heat/light and mechanical energy. Most of the known dynamic crystals can only respond to a single stimulus, and materials that can respond to multiple stimuli are rare. Here, we report an organic crystalline material that can be bent plastically and is also thermosalient, as its crystals can move when they undergo a reversible phase transition. The crystals transmit light regardless of their shape or crystalline phase. The combination of light transduction and reversible thermomechanical deformation provides an opportunity to switch the waveguiding capability of the material in a narrow temperature range, which holds a tremendous potential for applications in heat-averse electronic components, such as central processing units. Unlike existing electronics, the material we report here is completely organic and therefore much lighter, potentially reducing the overall weight of electronic circuits.
RESUMEN
The rapid release of gas by a chemical reaction to generate momentum is one of the most fundamental ways to elicit motion that could be used to sustain and control the motility of objects. We report that hollow crystals of a three-dimensional supramolecular metal complex that releases gas by photolysis can propel themselves or other objects and advance in space when suspended in mother solution. In needle-like regular crystals, the reaction occurs mainly on the surface and results in the formation of cracks that evolve due to internal pressure; the expansion on the cracked surface of the crystal results in bending, twisting, or coiling of the crystal. In hollow crystals, gas accumulates inside their cavities and emanates preferentially from the recess at the crystal terminus, propelling the crystals to undergo directional photomechanical motion through the mother solution. The motility of the object which can be controlled externally to perform work delineates the concept of "crystal microbots", realized by photoreactive organic crystals capable of prolonged directional motion for actuation or delivery. Within the prospects, we envisage the development of a plethora of light-weight, efficient, autonomously operating robots based on organic crystals with high work capacity where motion over large distances can be attained due to the large volume of latent gas generated from a small volume of the crystalline solid.
RESUMEN
Organic molecular crystals have historically been viewed as delicate and fragile materials. However, recent studies have revealed that many organic crystals, especially those with high aspect ratios, can display significant flexibility, elasticity, and shape adaptability. The discovery of mechanical compliance in organic crystals has recently enabled their integration with responsive polymers and other components to create novel hybrid and composite materials. These hybrids exhibit unique structure-property relationships and synergistic effects that not only combine, but occasionally also enhance the advantages of the constituent crystals and polymers. Such organic crystal composites rapidly emerge as a promising new class of materials for diverse applications in optics, electronics, sensing, soft robotics, and beyond. While specific, mostly practical challenges remain regarding scalability and manufacturability, being endowed with both structurally ordered and disordered components, the crystal-polymer composite materials set a hitherto unexplored yet very promising platform for the next-generation adaptive devices. This Perspective provides an in-depth analysis of the state-of-the-art in design strategies, dynamic properties and applications of hybrid and composite materials centered on organic crystals. It addresses the current challenges and provides a future outlook on this emerging class of multifunctional, stimuli-responsive, and mechanically robust class of materials.
RESUMEN
Plants and animals that thrive in arid regions utilize the diurnal changes in environmental temperature and humidity to optimize their water budget by combining water-harvesting mechanisms and morphophysiological traits. The Athel tamarisk (Tamarix aphylla) is a halophytic desert shrub that survives in arid, hypersaline conditions by excreting concentrated solutions of ions as droplets on its surface that crystallize into salt crystals and fall off the branches. Here, we describe the crystallization on the surface of the plant and explore the effects of external conditions such as diurnal changes in humidity and temperature. The salt mixtures contain at least ten common minerals, with NaCl and CaSO4·2H2O being the major products, SiO2 and CaCO3 main sand contaminants, and Li2SO4, CaSO4, KCl, K2Ca(SO4)2·H2O, CaMg(CO3)2 and AlNaSi3O8 present in smaller amounts. In natural conditions, the hanging or sitting droplets remain firmly attached to the surface, with an average adhesion force of 275 ± 3.5 µN measured for pure water. Rather than using morphological features of the surface, the droplets adhere by chemical interactions, predominantly by hydrogen bonding. Increasing ion concentration slightly increases the contact angle on the hydrophobic cuticle, thereby lowering surface wettability. Small amounts of lithium sulfate and possibly other hygroscopic salts result in strong hygroscopicity and propensity for deliquescence of the salt mixture overnight. Within a broader context, this natural mechanism for humidity harvesting that uses environmentally benign salts as moisture adsorbents could provide a bioinspired approach that complements the currently available water collection or cloud-seeding technologies.
RESUMEN
Despite being researched for decades, shape-shifting molecular crystals have yet to claim their spot as an actuating materials class among the primary functional materials. While the process for developing and commercializing materials can be lengthy, it inevitably starts with building an extensive knowledge base, which for molecular crystal actuators remains scattered and disjointed. Using machine learning for the first time, we identify inherent features and structure-function relationships that fundamentally impact the mechanical response of molecular crystal actuators. Our model can factor in different crystal properties in tandem and decipher their intersectional and combined effects on each actuation performance. This analysis is an open invitation to utilize interdisciplinary expertise in translating the current basic research on molecular crystal actuators into technology-based development that promotes large-scale experimentation and prototyping.
RESUMEN
In the last century, molecular crystals functioned predominantly as a means for determining the molecular structures via X-ray diffraction, albeit as the century came to a close the response of molecular crystals to electric, magnetic, and light fields revealed that the physical properties of molecular crystals were as rich as the diversity of molecules themselves. In this century, the mechanical properties of molecular crystals have continued to enhance our understanding of the colligative responses of weakly bound molecules to internal frustration and applied forces. Here, the authors review the main themes of research that have developed in recent decades, prefaced by an overview of the particular considerations that distinguish molecular crystals from traditional materials such as metals and ceramics. Many molecular crystals will deform themselves as they grow under some conditions. Whether they respond to intrinsic stress or external forces or interactions among the fields of growing crystals remains an open question. Photoreactivity in single crystals has been a leading theme in organic solid-state chemistry; however, the focus of research has been traditionally on reaction stereo- and regio-specificity. However, as light-induced chemistry builds stress in crystals anisotropically, all types of motions can be actuated. The correlation between photochemistry and the responses of single crystals-jumping, twisting, fracturing, delaminating, rocking, and rolling-has become a well-defined field of research in its own right: photomechanics. The advancement of our understanding requires theoretical and high-performance computations. Computational crystallography not only supports interpretations of mechanical responses, but predicts the responses itself. This requires the engagement of classical force-field based molecular dynamics simulations, density functional theory-based approaches, and the use of machine learning to divine patterns to which algorithms can be better suited than people. The integration of mechanics with the transport of electrons and photons is considered for practical applications in flexible organic electronics and photonics. Dynamic crystals that respond rapidly and reversibly to heat and light can function as switches and actuators. Progress in identifying efficient shape-shifting crystals is also discussed. Finally, the importance of mechanical properties to milling and tableting of pharmaceuticals in an industry still dominated by active ingredients composed of small molecule crystals is reviewed. A dearth of data on the strength, hardness, Young's modulus, and fracture toughness of molecular crystals underscores the need for refinement of measurement techniques and conceptual tools. The need for benchmark data is emphasized throughout.
RESUMEN
Chemical and morphological traits of natural substrates that can propel and transport fluids over their surfaces have long provided inspiration for the engineering of artificial materials that can harvest and collect water from aerial humidity. Here we report that the gradual widening of parallel microchannels on a surface of a slowly subliming hexachlorobenzene crystal can promote the autonomous and bidirectional transduction of condensed aerial water. Driven by topology changes on the surface of the crystal and water exchange with the gas phase, droplets of condensed water migrate over the crystal. These droplets are also able to transport silver particles and other particulate matter, such as dust. The velocity of the particles was shown to be dependent on both the sublimation rate of the crystal and the relative humidity of its environment. This example of a sublimation-powered water flow demonstrates that topological surface changes accompanying crystal phase transitions can be harnessed to transport liquid and solid matter over surfaces.
RESUMEN
The chemical reactions underlying the emission of light in fireflies and other bioluminescent beetles are some of the most thoroughly studied processes by scientists worldwide. Despite these remarkable efforts, fierce academic arguments continue around even some of the most fundamental aspects of the reaction mechanism behind the beetle bioluminescence. In an attempt to reach a consensus, we made an exhaustive search of the available literature and compiled the key discoveries on the fluorescence and chemiluminescence spectrochemistry of the emitting molecule, the firefly oxyluciferin, and its chemical analogues reported over the past 50+ years. The factors that affect the light emission, including intermolecular interactions, solvent polarity, and electronic effects, were analyzed in the context of both the reaction mechanism and the different colors of light emitted by different luciferases. The collective data points toward a combined emission of multiple coexistent forms of oxyluciferin as the most probable explanation for the variation in color of the emitted light. We also highlight realistic research directions to eventually address some of the remaining questions related to firefly bioluminescence. It is our hope that this extensive compilation of data and detailed analysis will not only consolidate the existing body of knowledge on this important phenomenon but will also aid in reaching a wider consensus on some of the mechanistic details of firefly bioluminescence.
Asunto(s)
Escarabajos , Luciérnagas , Animales , Escarabajos/química , Luciérnagas/química , Luciferasas/química , Luminiscencia , Mediciones LuminiscentesRESUMEN
The outstanding performance and facile processability turn hybrid organic-inorganic perovskites into one of the most sought-after classes of semiconducting materials for optoelectronics. Yet, their translation into real-world applications necessitates that challenges with their chemical stability and poor mechanical robustness are first addressed. Here, centimeter-size single crystals of methylammoniumlead(II) iodide (MAPbI3 ) are reported to be capable of autonomous self-healing under minimal compression at ambient temperature. When crystals are halved and the fragments are brought in contact, they can readily self-repair as a result of a liquid-like behavior of their lattice at the contact surface, which leads to a remarkable healing with an efficiency of up to 82%. The successful reconstitution of the broken single crystals is reflected in recuperation of their optoelectronic properties. Testing of the healed crystals as photodetectors shows an impressive 74% recovery of the generated photocurrent relative to pristine crystals. This self-healing capability of MAPbI3 single crystals is an efficient strategy to overcome the poor mechanical properties and low wear resistance of these materials, and paves the way for durable and stable optoelectronic devices based on single crystals of hybrid perovskites.
RESUMEN
The anticipated shift in the focal point of interest of solid-state chemists, crystal engineers, and crystallographers from structure to properties to function parallels the need to apply our accumulated understanding of the intricacies of crystal structure to explaining the related properties, with the ultimate goal of harnessing that knowledge in applications that require soft, lightweight, or biocompatible organic solids. In these developments, the adaptive molecular crystals warrant particular attention as an alternative choice of materials for light, flexible, and environmentally benign devices, primarily memories, capacitors, sensors, and actuators. Some of the outstanding requirements for the application of these dynamic materials as high-efficiency energy-storage devices are strongly induced polarization, a high switching field, and narrow hysteresis in the case of reversible dynamic processes. However, having been studied almost exclusively by chemists, molecular crystals still lack the appropriate investigations that reliably evaluate their reproducibility, scalability, and actuating performance, and some important drawbacks have diverted the interest of engineers from these materials in applications. United under the umbrella term crystal adaptronics, the recent research efforts aim to realistically assess the appositeness of dynamic crystals for applications that require fast, reversible, and continuous operation over prolonged periods of time. With the aim of highlighting the most recent developments, this Perspective discusses their assets and pitfalls. It also provides some hints on the likely future developments that capitalize on the untapped, sequestered potential of this distinct materials class for applications.
RESUMEN
Mechanochemical analogues have recently been established for several enzymatic reactions, but they require periodic interruption of the reaction for sampling, dissolution, and (bio)chemical analysis to monitor their progress. By applying a mechanochemical procedure to induce bioluminescence analogous to that used by the marine ostracod Cypridina (Vargula) hilgendorfii, here we demonstrate that the light emitted by a bioluminescent reaction can be used to directly monitor the progress of a mechanoenzymatic reaction without sampling. Mechanical treatment of Cypridina luciferase with luciferin generates bright blue light which can be readily detected and analyzed spectroscopically. This mechanically assisted bioluminescence proceeds through a mechanism identical to that of bioluminescence in solution, but has higher activation energy due to being diffusion-controlled in the viscous matrix. The results suggest that luciferases could be used as light-emissive reporters of mechanoenzymatic reactions.
Asunto(s)
Luciferasas/metabolismo , Mediciones Luminiscentes , Animales , Crustáceos , Luciferina de Luciérnaga/química , Luciferina de Luciérnaga/metabolismo , Luciferasas/química , Estructura MolecularRESUMEN
The perception of organic crystals being rigid static entities is quickly eroding, and molecular crystals are now matching a number of properties previously thought to be unique to soft materials. Here, we present crystals of a boronate ester that encompass many of the elastic and plastic mechanical properties of polymers such as bending, twisting, coiling and highly efficient self-healing of up to 67%, while they maintain their long-range structural order. The approach utilizes the concept of dynamic covalent chemistry and proves it can be applied towards ordered materials. This work expands our current understanding of the properties of crystalline molecular materials, and it could have implications towards the development of mechanically robust organic crystals that are capable of self-repair for durable all-organic electronics and soft robotics.
RESUMEN
Being capable of rapid and complete structure switching, the martensitic phase transitions in molecular crystals are thought to hold a tremendous potential as thermally driven organic actuators. However, the mechanical engineering parlance in the assessment of their performance is not immediately legible to the chemistry research community that starts to explore these materials, and the unavailability of performance indices has precluded molecular crystals from being considered in the device design process. Here, we demonstrate that an organic martensite, hexamethylbenzene, can be used to perform work that is comparable to that of most actuator classes. Millimeter-size single crystals of this material undergo a transition between two forms by uniaxial expansion at a rate of 6.36(2) mm s-1, exerting force in the range 10-100 mN. The force-to-weight ratio of the crystals is on the order of 104 and is superior to that of some living creatures. An actuator performance chart reveals that the performance of this material is close to that of nanomuscles, electrostatic actuators and voice coils, with a strain higher than that of electro/magnetostrictive actuators and ceramic piezoelectrics and stress higher than that of the electroactive polymers, MEMS devices, nanomuscles, voice coils, and some solenoids. Moreover, the crystals of this material are mechanically compliant and can be reversibly bent and shaped to fit the desired application. Altogether, the results point to the untapped potential of molecular crystals as rapid and efficient soft, organic actuators.
RESUMEN
Ischemic heart disease often leads to myocardial infarction and remains the most common cause for death in humans. Although the exact impetus for the infarction remains elusive, a mechanism has been proposed that relates the disease to the observed high cholesterol levels in the body. The mechanism claims that cholesterol crystallizes inside the arterial plaque into needle-shaped crystals. The crystals puncture the fibrous cap of the plaque, whereby the necrotic contents of the plaque are spilled, subsequently clotting the blood vessels. This hypothesis has not been given sufficient attention partly due to the purported softness of the organic crystals and the common platy habit of the known crystal forms of cholesterol. In this work it is shown that, from hydrophobic solutions that attempt to emulate the plaque contents, a new solid form of cholesterol crystallizes as prisms with mucronate tips, and they are sufficiently strong to puncture a lamb pericardium, which mimics the plaque cap. The properties of the crystals were assessed by mechanical, structural, and crystallographic analyses. The results support the hypothesis that the cholesterol crystals can be considered, at least within the framework of the proposed mechanism, a possible cause of myocardial infarction.
Asunto(s)
Colesterol/química , Pericardio , Animales , Fenómenos Biomecánicos , Aceite de Maíz/química , Cristalización , Humanos , Modelos Moleculares , Octanoles/química , Aceite de Oliva/química , Placa Aterosclerótica , Aceite de Brassica napus/química , Ovinos , SolucionesRESUMEN
The concept of biomineralization and encapsulation of organic molecules into inorganic matrices to alter and enhance their physical properties has been evolved and perfected in natural systems. Being inspired by the natural biomineralization of foreign components into calcite, here the inclusion of a plant virus, cowpea mosaic virus (CPMV) of 5.4% by mass into crystals of calcite is reported. The viral particles are labeled with a fluorescent tag (Alexa Fluor 532), and are observed within the calcite matrix using confocal fluorescence microscopy. Upon encapsulation, the calcite crystals exhibit an irregular and aggregated morphology, as visualized with atomic force and electron microscopy. The viral particles protected inside the calcite crystals are able to resist harsh chemical agents. While spherical viral particles such as CPMV can be easily included in calcite, viruses such as the tobacco mosaic virus are not compatible with the host, presumably due to their high aspect ratio. The results provide a simple and scalable method to incorporate viral particles into inorganic matrix, and could prove useful in thermal stabilization of sensitive viral biological agents such as vaccines in the future.
RESUMEN
The interactions between cucurbit[7]uril (CB7) macrocycles and pilocarpine (PIL) were investigated in aqueous solution by using (1)H NMR and circular dichroism (CD) spectroscopic techniques. The characterizations of the freeze-drying solid complex were conducted by electrospray ionization mass spectroscopy (ESI-MS), Fourier transform-infrared spectroscopy (FT-IR), thermogravimetry, and differential scanning calorimetry (DSC) techniques. The DSC and thermogravimetry confirmed the production of a thermally stable solid complex. The NMR, CD and ESI-MS measurements confirmed asymmetric induction during the complexation reaction, in which the γ-lactone ring of PIL (not the imidazole nucleus) has been fully encapsulated within the cavity of CB7. The stability of the drug has significantly enhanced as evidenced by the high-performance liquid chromatographic (HPLC) method. The results are discussed in the context of utilizing non-conventional supramolecular host-guest approaches to enhance the chemical stability in aqueous media of hydrophilic PIL drugs as model compounds. The non-classical stereospecific interactions between CB7 and PIL drugs are also highlighted.