Generation of fine fragments during dynamic propagation of pressurized cracks.

High-resolution numerical simulations of cracks driven by an internal pressure in a heterogeneous and brittle granular medium produce fragment-size distributions with the same characteristics as experiments on blasted cylinders of mortar and rock in both the fine- and the intermediate-size-fragment regions. To mimic full-scale blasts used, e.g., within the mining industry, the cracks propagate in a medium that is under compression, neutral, or under tension. In a compressive environment, shear fracture produces a large volume of fines, whereas in a neutral or tensile environment, unstable crack branching is responsible for a much smaller volume of fines. The boundary between the fine- and the intermediate-size fragments scales as the average grain size of the material. The ultimate goal is to develop a blasting process that minimizes the fines, which, in mining, are both an environmental hazard and useless for further processing.

Peripherally inserted central catheter in extremely preterm infants: Characteristics and influencing factors.

OBJECTIVE: To evaluate the duration of catheter stay, incidence of non-elective removal and rates of complications associated with peripherally inserted central catheters (PICCs) in relation to different catheter positions in extremely preterm infants (EPT, <28 weeks of gestation). METHODS: A retrospective analysis of Peripherally Inserted Central Catheters (PICCs) inserted in EPT infants over a 10-year period, from January 2004 through December 2013 (mean gestational age, 25.2 weeks; mean birth weight, 727 g). RESULTS: Of the 379 PICCs analyzed, the majority of lines (68%) were placed in the central position, and 259 PICCs (56%) were removed electively after fulfilment of the treatment. Significantly more PICCs in the lower extremities compared to the upper extremities were in central positions (86% vs 61%, p < 0.001, respectively). Significantly more PICCs that were removed electively after fulfilment of the treatment were in a central position compared to a non-central position (p < 0.001). Of the 166 catheters that were removed because of complications, most (71%) of them had mechanical problems, and 13% had sepsis resulting in an incidence rate of 4.4/1000 catheter days. CONCLUSION: PICCs inserted in the lower extremity were more likely to have a centrally placed tip position compared to PICC lines inserted in the upper extremities.

Friction of Shear-Fracture Zones.

A shear fracture of brittle solids under compression undergoes a substantial evolution from the initial microcracking to a fully formed powder-filled shear zone. Experiments covering the entire process are relatively easy to conduct, but they are very difficult to investigate in detail. Numerically, the large strain limit has remained a challenge. An efficient simulation model and a custom-made experimental device are employed to test to what extent a shear fracture alone is sufficient to drive material to spontaneous self-lubrication. A "weak shear zone" is an important concept in geology, and a large number of explanations, specific for tectonic conditions, have been proposed. We demonstrate here that weak shear zones are far more general, and that their emergence only demands that a microscopic, i.e., fragment-scale, stress relaxation mechanism develops during the fracture process.

New beam line for time-of-flight medium energy ion scattering with large area position sensitive detector.

A new beam line for medium energy ion mass scattering (MEIS) has been designed and set up at the Ångström laboratory, Uppsala University, Sweden. This MEIS system is based on a time-of-flight (ToF) concept and the electronics for beam chopping relies on a 4 MHz function generator. Repetition rates can be varied between 1 MHz and 63 kHz and pulse widths below 1 ns are typically obtained by including beam bunching. A 6-axis goniometer is used at the target station. Scattering angle and energy of backscattered ions are extracted from a time-resolved and position-sensitive detector. Examples of the performance are given for three kinds of probing ions, (1)H(+), (4)He(+), and (11)B(+). Depth resolution is in the nanometer range and 1 and 2 nm thick Pt layers can easily be resolved. Mass resolution between nearby isotopes can be obtained as illustrated by Ga isotopes in GaAs. Taking advantage of the large size detector, a direct imaging (blocking pattern) of crystal channels are shown for hexagonal, 4H-SiC. The ToF-MEIS system described in this paper is intended for use in semiconductor and thin film areas. For example, depth profiling in the sub nanometer range for device development of contacts and dielectric interfaces. In addition to applied projects, fundamental studies of stopping cross sections in this medium energy range will also be conducted.

Stiffness transition in anisotropic fiber nets.

We demonstrate the existence of a percolationlike stiffness transition in fiber networks with a bidisperse orientation distribution and with fiber densities clearly above the geometrical and the ordinary stiffness transition. The fibers are oriented parallel and perpendicular to a strain direction and they have a large fiber aspect ratio. The stiffness K of the fiber nets can be described by a scaling relation, K [proportionally] τ(α) g[(ε - ε(c))/τ(-ß)], where τ is the fraction of fibers parallel to strain. g is a scaling function that is roughly described by a power law g(x) [proportionally ] x(γ) for stiffness above the transition and by a constant below the transition. The transition point is characterized by qualitative changes in the distribution of the elastic deformation energy of the fibers, the deformation mode of the fibers, the effective Poisson ratio of the nets, the distribution of elastic energy on fibers and cross links, and the ratio of elastic and viscous dissipation energy. This transition opens the possibility of extreme stiffness variations with minimal mesh manipulations in the vicinity of the transition (i.e., a stiffness gate). It is possible that this transition affects the mechanical behavior of the cytoskeleton in cells.

Spontaneous formation of densely packed shear bands of rotating fragments.

Appearance of self-similar space-filling ball bearings has been suggested to provide the explanation for seismic gaps, shear weakness, and lack of detectable frictional heat formation in mature tectonic faults (shear zones). As the material in a shear zone fractures and grinds, it could be thought to eventually form a conformation that allows fragments to largely roll against each other without much sliding. This type of space-filling "ball bearing" can be constructed artificially, but so far how such delicate structures may appear spontaneously has remained unexplained. It is demonstrated here that first-principles simulations of granular packing with fragmenting grains indeed display spontaneous formation of shear bands with fragment conformations very similar to those of densely packed ball bearings.

Mechanical and thermal stability of adhesive membranes with nonzero bending rigidity.

Membranes at a microscopic scale are affected by thermal fluctuations and self-adhesion due to van der Waals forces. Methods to prepare membranes of even molecular scale, e.g., graphene, have recently been developed, and the question of their mechanical and thermal stability is of crucial importance. To this end we modeled microscopic membranes with an attractive interaction and applied Langevin dynamics. Their behavior was also analyzed under external loading. Even though these membranes folded during isotropic compression as a result of energy minimization, the process at high confinement was similar to crumpling of macroscopic nonadhesive sheets. The main difference appeared when the compression was released. In such cases, for membranes of sufficiently large size, folded or scrolled conformations emerged. At high temperature entropic effects made such conformations unfavorable, however.

Scaling behavior in non-Hookean compression of thin-walled structures.

The mechanics and stability of thin-walled structures is a challenging and important branch in structural mechanics. Under vertical compression the deformation of a thin-walled box differs from that of, e.g., a cylindrical shell. It is demonstrated here that compression of a box can be described by a set of generic scaling laws representing three successive regimes: a linear, wrinkled, and collapsed regime. The linear Hookean regime represents the normal behavior before any instability sets in, while the following wrinkled regime is shown to be analogous to compression of thin-film blisters. The compression force reaches its maximum at the onset of the final collapsed regime that has all the characteristics of membrane crumpling. The theoretical scaling laws were confirmed by numerical simulations.

Difference between fracture of thin brittle sheets and two-dimensional fracture.

Recently there has been some suggestions that fragmentation of thin brittle sheets is qualitatively different from pure two-dimensional fragmentation. The obvious reason for such a discrepancy is the possibility of the sheet to deform out of plane. There is a generic crack-branching mechanism that creates power-law fragment size distribution in the small fragment range for two-dimensional (2D) and three-dimensional bulk fragmentation with the power exponent (2D-1)/D. For thin sheets, the power exponent seems to be close to 1.2 which differs from the D=2 exponent 1.5. In order to make a distinct separation between sheet and 2D fragmentation, high-resolution fragment size distributions are required for fragmentation models with minimal differencies other than dimensionality. Here a very efficient numerical model which can be switched from 2D fragmentation to out-of-plane sheet fragmentation with minimal changes is used to produce high-resolution fragment size distribution for the two cases. The model results cast some doubt on the existence of separate universality classes for sheet and 2D fragmentation.

Variability analysis of pathogen and indicator loads from urban sewer systems along a river.

The pathogen loads within surface waters originating from urban wastewater sources needs to be assessed to support drinking water risk estimations and optimal selection of risk reduction measures. Locally reported discharges from sewer systems (>100,000 persons connected) were used to simulate the potential microbial loads into the Göta älv river, Sweden. Using Monte Carlo simulations, the median and 95% percentile (i.e. worst case) of total microbial load from wastewater treatment plants, sewer network overflows and emergency discharges were assessed and presented for dry and wet weather conditions. Wastewater treatment plants with secondary treatment represented a major source of E. coli, norovirus, Giardia and Cryptosporidium. During wet weather, comparably high microbial loads were found for sewer overflows due to heavy rains. Substantial loads were also associated with an incident of the emergency discharge of untreated wastewater. Simulated river water concentrations of faecal indicators (E. coli, sulfite reducing clostridia, somatic coliphages) and pathogens (norovirus, Giardia, Cryptosporidium) were confirmed by river sampling data, suggesting that urban wastewater is the major microbial source for this river.

The effect of plasticity in crumpling of thin sheets.

Crumpling a thin sheet of material into a small volume requires energy for creating a network of deformations such as vertices and ridges. Scaling properties of a single elastic vertex or ridge have been analysed theoretically, and crumpling of a sheet by numerical simulations. Real materials are however elasto-plastic and large local strains induce irreversible plastic deformations. Hence, a numerical model that can be purely elastic or elasto-plastic is introduced. In crumpled elastic sheets, the ridge patterns are found to be similar, independent of the width to thickness (L/h) ratio of the sheet, and the fractal dimension of crumpled sheets is given by scaling properties of the energy and average length of ridges. In crumpled elasto-plastic sheets, such a similarity does not appear as the L/h ratio affects the deformations, and the fractal dimension (Dpl) is thereby reduced. Evidence is also found of Dpl not being universal but dependent on the plastic yield point of the material.

Graphometric variables of one's signature: II. Correlations with measures of perception, cognitive function, and personality.

This study focused on interrelations between graphometric variables of the signature and measures of perception, cognitive function, and personality. Signatures from a sample of psychiatric and somatic outpatients (N = 205) were analyzed into 23 graphometric variables and correlated with tests of IQ, cognitive and perceptual function, and personality. The results of a factor analysis of the graphometric, perceptual, and cognitive variables were very much like results from previous studies. Relationships with the graphometric variables can be described in five categories of intelligence, psychomotility, flexibility and speed of closure, and personality. Graphometric signs of Extraversion and Neuroticism were identified, and the two capitals in the signature indicated different psychological meanings. Measurements of the signature offered important personality information.

Deterministic folding in stiff elastic membranes.

Crumpled membranes have been found to be characterized by complex patterns of spatially seemingly random facets separated by narrow ridges of high elastic energy. We demonstrate by numerical simulations that compression of stiff elastic membranes with small randomness in their initial configurations leads to either random ridge configurations (high entropy) or nearly deterministic folds (low elastic energy). For folding with symmetric ridge configurations to appear in part of the crumpling processes, the crumpling rate must be slow enough. Folding stops when the thickness of the folded structure becomes important, and crumpling continues thereafter as a random process.

Rotating bearings in regular and irregular granular shear packings.

For 2D regular dense packings of solid mono-size non-sliding disks there is a mechanism for bearing formation under shear that can be explained theoretically. There is, however, no easy way to extend this model to include random dense packings which would better describe natural packings. A numerical model that simulates shear deformation for both near-regular and irregular packings is used to demonstrate that rotating bearings appear roughly with the same density in random and regular packings. The main difference appears in the size distribution of the rotating clusters near the jamming threshold. The size distribution is well described by a scaling form with a large-size cut-off that seems to grow without bounds for regular packings at the jamming threshold, while it remains finite for irregular packings. At packing densities above the jamming transition there can be no shear, unless the disks are allowed to break. Breaking of disks induces a large number of small local bearings. Clusters of rotating particles may contribute to e.g. pre-rupture yielding in landslides, snow avalanches and to the formation of aseismic gaps in tectonic fault zones.

Identification and management of microbial contaminations in a surface drinking water source.

Microbial contamination of surface waters constitutes a health risk for drinking water consumers which may be lowered by closing the raw water intake. We have evaluated microbial discharge events reported in the river Göta älv, which is used for raw water supply to the city of Göteborg. Elevated levels of faecal indicator bacteria were observed during periods of closed raw water intake. High bacteria levels were, however, also occasionally detected during periods of open intake, probably as a result of microbial discharge far upstream in the river which may be difficult to predict and manage by closing the intake. Accumulated upstream precipitations, resulting in surface runoff and wastewater contaminations in the catchment, correlated positively with the levels of total coliforms, E. coli, intestinal enterococci and sulfite-reducing clostridia. Levels of faecal indicator organisms were negatively correlated to the water temperature due to enhanced survival at lower temperatures. Wastewater discharges from a municipality located just upstream of the water intake resulted in elevated E. coli concentrations downstream at the raw water intake for Göteborg. To improve the prediction of microbial contaminations within the river Göta älv, monitoring data on turbidity and upstream precipitation are of particular importance.

Evaluation of the microbial risk reduction due to selective closure of the raw water intake before drinking water treatment.

Short-term peaks in pathogen concentrations may increase the risks for waterborne diseases considerably. In this study the occurrence of indicator organisms and pathogens in the river Göta älv at the raw water intake to Göteborg was evaluated and related to risk for drinking water consumption. About half of the 24 pathogen samples, taken during event and non-event conditions, were positive for at least one of the following: Cryptosporidium, Giardia, norovirus, enterovirus, Campylobacter and E. coli O157. Positive pathogen detects were often associated with heavy rainfalls and viruses with a sewage emergency discharge. The annualised probability of infection from this type of event was calculated from pathogen concentrations in a QMRA model. Given that the water intake is not closed, the risk given present water treatment seems to be acceptable for Giardia; however, it is at a borderline for Cryptosporidium and insufficient for noro- and enteroviruses. Present results emphasise the need for an appropriate intake regulation with respect to high pathogen loads, as the risk increases with time of exposure to pathogen contaminants. Rather than a threshold level on E. coli, reports on upstream microbial discharges are valuable for quick pathogen indications.

Solution for the fragment-size distribution in a crack-branching model of fragmentation.

It is well established that rapidly propagating cracks in brittle material are unstable such that they generate side branches. It is also known that cracks are attracted by free surfaces, which means that they attract each other. This information is used here to formulate a generic model of fragmentation in which the small-size part of the fragment-size distribution results from merged crack branches in the damage zones along the paths of the propagating cracks. This model is solved under rather general assumptions for the fragment-size distribution. The model leads to a generic distribution S(-gamma) exp(-S/S(0)) for fragment sizes S, where gamma = 2d-1/d with d the Euclidean dimension, and S(0) is a material dependent parameter.

Random networks of fibres display maximal heterogeneity in the distribution of elastic energy.

Above a small length scale, the distribution of local elastic energies in a material under an external load is typically Gaussian, and the dependence of the average elastic energy on strain defines the stiffness of the material. Some particular materials, such as granular packings, suspensions at the jamming transition, crumpled sheets and dense cellular aggregates, display under compression an exponential distribution of elastic energies, but also in this case the elastic properties are well defined. We demonstrate here that networks of fibres, which form uncorrelated non-fractal structures, have under external load a scale invariant distribution of elastic energy (epsilon) at the fibre-fibre contacts proportional to 1/epsilon. This distribution is much broader than any other distribution observed before for elastic energies in a material. We show that for small compressions it holds over 10 orders of magnitude in epsilon. In such a material a few 'hot spots' carry most of the elastic load. Consequently, these materials are highly susceptible to local irreversible deformations, and are thereby extremely efficient for damping vibrations.

Graphometric variables of one's signature: I. Basic measures.

This study focused on statistical properties and interrelationships of graphometric variables of the signatures of outpatients, 100 men and 119 women, remitted from somatic and psychiatric clinics for possible psychotherapy or for tests of IQ, personality, or brain lesions. The patients' signature on test forms were used. The type of handwriting was classified into Common, Print and Block letters, quantified in breadth, length, and area and grades of slant of minuscules ("lower-case letters") and majuscules ("upper-case"). Analysis indicated sex and age played roles in style of handwriting and size of letters; writing styles differed on most graphometric variables; and meaningful patterns of interrelationships among graphometric variables were specified by factor analysis.

Cell aggregation: packing soft grains.

Cellular aggregates may be considered as collections of membrane enclosed units with a pressure difference between the internal and external liquid phases. Cells are kept together by membrane adhesion and/or confined space compression. Pattern formation and, in particular, intercellular spacing have important roles in controlling solvent diffusion within such aggregates. A physical approach is used to study generic aspects of cellular packings in a confined space. Average material properties are derived from the free energy. The appearance of penetrating intercellular void channels is found to be critically governed by the cell wall adhesion mechanisms during the formation of dense aggregates. A fully relaxed aggregate efficiently hinders solvent diffusion at high hydrostatic pressures, while a small fraction (approximately 0.1) of adhesion related packing frustration is sufficient for breaking such a blockage even at high a pressure.