Metal concentrations in transitional and coastal waters measured by passive (Diffusive Gradients in Thin-films) and spot sampling: MONITOOL Project Dataset.

The MONITOOL project (2017-2023) was carried out to describe the relationships between total dissolved and labile metal concentrations measured in spot water samples and in concurrently deployed Diffusive Gradients in Thin-films (DGTs) passive samplers, respectively. The ultimate aim was to adapt existing marine metal Environmental Quality Standards (EQS marine water) for DGTs, enabling their use in the context of the European Directives (the Water Framework Directive (WFD) and the Marine Strategy Framework Directive (MSFD)). Time-integrated metal concentrations provided by DGTs, representing several days, are an advantage compared to conventional spot sampling, especially in highly dynamic systems, such as transitional waters. Hence, the MONITOOL project aimed to provide a robust database of dissolved and labile metal concentrations in transitional and coastal waters, based upon co-deployments of DGTs and collection of spot water samples at several sampling sites (England, France, Ireland, Italy, Northern Ireland, Portugal, Scotland and Spain), followed subsequently by DGT and water metal analysis. Samplings were carried out in 2018 and 2022, following agreed protocols developed in the framework of the project. The MONITOOL dataset includes metal concentrations from DGTs, measured with Inductively Coupled Plasma Mass Spectrometry (ICP-MS: Cd, Co, Cu, Fe, Mn, Ni, Pb, Zn) and in concurrently collected spot water samples by ICP-MS (Al, Cd, Co, Cu, Mn, Ni, Pb, Zn) and Anodic/Cathodic Stripping Voltammetry (ASV/CSV: Cd, Pb, Ni). Moreover, data on seawater physical-chemical parameters (salinity, temperature, dissolved oxygen, pH, turbidity, total suspended solids, dissolved organic carbon, and total organic carbon) is provided. This database presents the results obtained using, concurrently, different forms of sampling and analytical techniques, enabling the comparison of the results obtained by these strategies and allowing the adaptation of EQS in marine water (EQS marine water) to DGTs (EQS DGT), in the context of the WFD. Moreover, due to the large number of sampling sites, it could also be used for other types of research, such as those dealing with metal speciation or the determination of baseline levels.

An international intercomparison exercise on passive samplers (DGT) for monitoring metals in marine waters under a regulatory context.

In order to move forward in the acceptance of a novel contaminant monitoring technique (Diffusive Gradients in Thin-films: DGT) for assessment of marine water bodies, sensu the WFD, an Inter-Laboratories Comparison (ILC) exercise (nine Europeans laboratories) was organized in the framework of the Interreg Atlantic Area MONITOOL project, which focused on the use of the DGT technique for the measurement of WFD priority metals (Cd, Ni and Pb). Reproducible results were obtained for each metal by several laboratories, supporting the assertion that DGT analysis can be performed satisfactorily by laboratories experienced in measuring metals at trace levels in marine environments, even if they have limited practice in DGT analysis. According to the Z-score analysis, among the 9 participating laboratories, 3 had 100 % of satisfactory results for Cd, Ni, and Pb, 3 had >80 % satisfactory results and 2 had about 60 % satisfactory results. This work highlights the need to clearly describe the DGT method in order to control sources of contamination during analytical steps, in particular the resin gel retrieval and the elution steps. Such international intercomparison exercise is an important step to develop the laboratory network involved in DGT analysis and contributes to the improvement of data quality.

Metals concentrations in transitional and coastal waters by ICPMS and voltammetry analysis of spot samples and passive samplers (DGT).

This study investigates the relationships among Ni, Cd and Pb's different chemical forms determined by different methodologies in coastal and transitional waters across a broad geographical scale. Concentrations were measured in spot samples and through passive sampling (DGT). High variability of metal concentrations was found among sampling sites and methodologies due to natural water fluctuations rather than to a given metal or method. Total dissolved metal concentrations in spot samples were lower than the EQS-WFD values. The labile fractions of Cd and Pb, measured in spot samples by Anodic Stripping Voltammetry and by DGT-ICPMS, were highly correlated. Similar labilities were found for Cd, while for Pb, the ASV labile fraction was ≈50% lower. These results reflect the pool of mobile and labile species available towards each technique kinetic window, and they seem not to be affected by discrete sampling flaws.

Concurrent sampling of transitional and coastal waters by Diffusive Gradient in Thin-films (DGT) and spot sampling for trace metals analysis.

This protocol was developed based on the knowledge acquired in the framework of the Interreg MONITOOL project (EAPA_565/2016) where extensive sampling campaigns were performed in transitional and coastal waters covering eight European countries. It provides detailed procedures and guidelines for the sampling of these waterbodies by concurrent collection of discrete water samples and the deployment of Diffusive Gradient in Thin-films (DGT) passive samplers for the measurement of trace metal concentrations. In order to facilitate the application of this protocol by end-users, it presents steps to follow in the laboratory prior to sampling campaigns, explains the procedures for field campaigns (including in situ measurement of supporting parameters) and subsequent sample processing in the laboratory in preparation for trace metal analyze by inductively coupled plasma-mass spectrometry (ICP-MS) and voltammetry. The protocol provides a systematic, coherent field sampling and sample preparation strategy that was developed in order to ensure comparability and reproducibility of the data obtained from each project Partner in different regions. • Standardization of the concurrent sampling of transitional and coastal waters by DGT passive samplers and spot sampling. • Robust procedures and tips based on existing international standards and comprehensive practical experience. • Links to demonstration videos produced within the MONITOOL project.

Assessing variability in the ratio of metal concentrations measured by DGT-type passive samplers and spot sampling in European seawaters.

The current study evaluates the effect of seawater physico-chemical characteristics on the relationship between the concentration of metals measured by Diffusive Gradients in Thin films (DGT) passive samplers (i.e., DGT-labile concentration) and the concentrations measured in discrete water samples. Accordingly, Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was used to measure the total dissolved metal concentrations in the discrete water samples and the labile metal concentrations obtained by DGT samplers; additionally, lead and cadmium conditional labile fractions were determined by Anodic Stripping Voltammetry (ASV) and total dissolved nickel was measured by Cathodic Stripping Voltammetry (CSV). It can be concluded that, in general, the median ratios of DGT/ICP and DGT/ASV(CSV) were lower than 1, except for Ni (median ratio close to 1) and Zn (higher than 1). This indicates the importance of speciation and time-integrated concentrations measured using passive sampling techniques, which is in line with the WFD suggestions for improving the chemical assessment of waterbodies. It is the variability in metal content in waters rather than environmental conditions to which the variability of the ratios can be attributed. The ratios were not significantly affected by the temperature, salinity, pH, oxygen, DOC or SPM, giving a great confidence for all the techniques used. Within a regulatory context such as the EU Water Framework Directive this is a great advantage, since the simplicity of not needing to use corrections to minimize the effects of environmental variables could help in implementing DGTs within monitoring networks.

Development and evaluation of a new diffusive gradients in thin-films technique for measuring organotin compounds in coastal sediment pore water.

Organotins present a toxicological risk to biota in the aquatic environment. Understanding the behaviour of these compounds in sediment is challenging, with sophisticated analytical techniques required for their measurement. We investigated the use of silica-bound sorbents for diffusive gradients in thin-films (DGT) adsorption gels to pre-concentrate five organotins (monobutlytin (MBT), dibutyltin (DBT), tributyltin (TBT), diphenyltin (DPhT), triphenyltin (TPhT)) found frequently in coastal sediment. C8 sorbent showed optimum performance in uptake and recovery of organotins for pH and ionic strength ranges typical of coastal waters. Recoveries from adsorption gels deployed in filtered sea water were MBT = 123 ± 20%, DBT = 75 ± 12%, TBT = 81 ± 16%, DPhT = 72 ± 30%, TPhT = 58 ± 10% respectively. Devices were used to investigate DGT fluxes and pore water concentrations of organotins in coastal sediment collected from a contaminated site. DGT fluxes measured in sediment cores for the five organotins ranged between 4.3 × 10-8 and 1.6 ×10-5ngcm2s-1. The depletion of organotin species within pore waters at the interface with DGT devices was measured over a series of deployment times (2, 7, 14, 21 and 28 days) and provided estimates of the concentration of organotins in pore waters at Langstone Harbour, UK, prior to depletion by the DGT device and information on their spatial heterogeneity. The novel in situ DGT device developed can pre-concentrate organotins from pore waters in coastal sediment core samples and allows their detection at low environmental concentrations using conventional gas chromatographic/mass spectrometric instrumentation. Use of the DGT device overcomes many problems associated with the conventional pore water sampling of organotins. Our preliminary data suggests it has potential in the future to be a useful tool in investigating the environmental fate of these pollutants. The use of the C8 gel will also allow for the simultaneous sequestration of other semi- and non-polar analytes present in the pore water.

Concentrations of mercury and other trace elements in two offshore skates: sandy ray Leucoraja circularis and shagreen ray L. fullonica.

Trace metal concentrations in muscle and liver tissues from two offshore species of skate were examined. Concentrations of mercury in muscle of Leucoraja circularis (n=20; 23-110.5cm total length, 157-490m water depth) and L. fullonica (n=24; 28.5-100cm total length, 130-426m water depth) were 0.02-1.8 and 0.04-0.61mgkg-1, respectively. Concentrations of both As and Hg increased with total length. Only the largest specimen had a concentration of Hg in muscle >1.0mgkg-1. Data were limited for specimens>90cm long, and further studies on contaminants in larger-bodied skates could usefully be undertaken.

The application of Diffusive Gradients in Thin Films (DGT) for improved understanding of metal behaviour at marine disposal sites.

Assessment of the effects of sediment metal contamination on biological assemblages and function remains a key question in marine management, especially in relation to disposal activities. However, the appropriate description of bioavailable metal concentrations within pore-waters has rarely been reported. Here, metal behaviour and availability at contaminated dredged material disposal sites within UK waters were investigated using Diffusive Gradient in Thin films (DGT). Three stations, representing contrasting history and presence of dredge disposal were studied. Depth profiles of five metals were derived using DGT probes as well as discrete analysis of total metal concentrations from sliced cores. The metals analysed were: iron and manganese, both relevant to sediment biogeochemistry; cadmium, nickel and lead, classified as priority pollutants. DGT time-integrated labile flux profiles of the metals display behaviour consistent with increasingly reduced conditions at depth and availability to DGT (iron and manganese), subsurface peaks and a potential sedimentary source to the water column related to the disposal activity (lead and nickel) and release to pore-water linked to decomposition of enriched phytodetritus (cadmium). DGT data has the potential to improve our current understanding of metal behaviour at impacted sites and is suitable as a monitoring tool. DGT data can provide information on metal availability and fluxes within the sediment at high depth-resolution (5mm steps). Differences observed in the resulting profiles between DGT and conventional total metal analysis illustrates the significance of considering both total metals and a potentially labile fraction. The study outcomes can help to inform and improve future disposal site impact assessment, and could be complemented with techniques such as Sediment Profile Imagery for improved biologically relevance, spatial coverage and cost-effective monitoring and sampling of dredge material disposal sites. Additionally, the application of this technology could help improve correlative work on biological impacts under national and international auspices when linking biological effects to more biologically relevant metal concentrations.

Concentrations of mercury and other trace elements in porbeagle shark Lamna nasus.

Concentrations of 11 trace elements in three tissues of porbeagle shark Lamna nasus (n=33) were determined. The maximum observed concentrations of Cd and Pb in muscle were 0.04 and 0.01mgkg-1, respectively, and all muscle samples were below European seafood limits for these metals. Hg concentrations in either the red or white muscle that exceeded European regulations for seafood were observed in one-third of specimens. Hg concentration, however, increased with length, and all fish >195cm had concentrations >1.0mgkg-1, with a maximum observed value of 2.0mgkg-1. Concentrations of Fe and Cu were, on average, 9.7 and 10 times higher in red muscle than in nearby white muscle, respectively. Mn, Zn, As and Se were also found in significantly higher concentrations in red muscle than in white muscle.

Spatial and temporal analysis of the risks posed by polychlorinated biphenyl and metal contaminants in dab (Limanda limanda) collected from waters around England and Wales.

The metals cadmium, mercury and lead, and the ICES7 CB levels were analysed in the common dab Limanda limanda to investigate whether concentrations of these determinants are at levels above established OSPAR assessment criteria around England and Wales. The results indicate that CB118 is above the OSPAR derived EAC at 22 out of 29 sampled stations, with 15 showing significant reductions. Cadmium is increasing significantly at six stations with two sites in the North Sea breaching corresponding OSPAR EAC. Mean results for all other PCBs and metals stayed below the EAC thresholds, with Hg concentrations even falling below BAC levels at South Eddystone located in the western English Channel. This study shows that PCBs banned over 20years ago are still found at concentrations in fish liver tissues which may pose a health risk to both the individual fish and their predators.

Concentrations of trace elements in a rare and threatened coastal shark from the Arabian Gulf (smoothtooth blacktip Carcharhinus leiodon).

Kuwait's waters are one of only two locations where the smoothtooth blacktip shark Carcharhinus leiodon is known to occur. Concentrations of 11 trace elements were analysed in five juvenile and two adult specimens of this coastal predator. Concentrations of lead in muscle increased with length, whilst manganese concentration decreased. Arsenic concentrations in muscle were among the highest reported in elasmobranchs, and the concentration in the liver increased significantly in relation to length. In comparison to published literature, concentrations of manganese (liver), lead (muscle) and iron (muscle and liver) were high. Mercury concentrations in the muscle exceeded European Food Safety Authority limits and were among the highest reported in any elasmobranch. Concentrations of selenium, which may inhibit mercury toxicity, were also high. These results and previous studies indicate that potentially hazardous levels of mercury and other contaminants may occur in sharks in this region, adding further stressors to these vulnerable populations.

Organohalogen contaminants and trace metals in North-East Atlantic porbeagle shark (Lamna nasus).

The North-East Atlantic porbeagle (Lamna nasus) population has declined dramatically over the last few decades and is currently classified as 'Critically Endangered'. As long-lived, apex predators, they may be vulnerable to bioaccumulation of contaminants. In this study organohalogen compounds and trace elements were analysed in 12 specimens caught as incidental bycatch in commercial gillnet fisheries in the Celtic Sea in 2011. Levels of organohalogen contaminants were low or undetectable (summed CB and BDE concentrations 0.04-0.85 mg kg(-1)wet weight). A notably high Cd concentration (7.2 mg kg(-1)wet weight) was observed in one mature male, whereas the range observed in the other samples was much lower (0.04-0.26 mg kg(-1)wet weight). Hg and Pb concentrations were detected only in single animals, at 0.34 and 0.08 mg kg(-1)wet weight, respectively. These contaminant levels were low in comparison to other published studies for shark species.

A temporal and spatial assessment of TBT concentrations at dredged material disposal sites around the coast of England and Wales.

Despite legislative interventions since the 1980s, contemporary concentrations of organotin compounds in marine sediments still impose restrictions on the disposal of dredged material in the UK. Here, we analyse temporal and spatial data to assess the effectiveness of the ban on the use of TBT paints in reducing concentrations at disposal sites. At a national scale, there was a statistically significant increase in the proportion of samples in which the concentration was below the limit of detection (LOD) from 1998 to 2010. This was observed for sediments both inside and outside the disposal sites. However, this temporal decline in organotin concentration is disposal site-specific. Of the four sites studied in detail, two displayed significant increases in proportion of samples below LOD over time. We argue that site-specificity in the effectiveness of the TBT ban results from variations in historical practices at source and unique environmental characteristics of each site.

Extraction of bioavailable contaminants from marine sediments: an approach to reducing toxicity using adsorbent parcels.

This paper demonstrates an approach to reducing acute toxicity in marine sediments using adsorbent parcels. Acute toxicity tests were carried using the marine amphipod Corophium volutator. Marine sediments were spiked with two know contaminants tributyltin and naphthalene and then treated with adsorbent parcels containing either amberlite XAD4 or activated carbon. Results showed that both types of adsorbent parcels were effective in reducing acute toxicity, not only within spiked sediments containing naphthalene and/or tributyltin, but also in an environmental field samples form an expected contaminated site. Adsorbent parcels such as these could provide a practical approach to remediate areas of contaminated sediment within marine environments. Furthermore adsorbents can be used as an identification tool for problematic contaminants using a toxicity identification evaluation approach.

Ocean acidification increases the toxicity of contaminated sediments.

Ocean acidification (OA) may alter the behaviour of sediment-bound metals, modifying their bioavailability and thus toxicity. We provide the first experimental test of this hypothesis with the amphipod Corophium volutator. Amphipods were exposed to two test sediments, one with relatively high metals concentrations (Σmetals 239 mg kg(-1) ) and a reference sediment with lower contamination (Σmetals 82 mg kg(-1) ) under conditions that mimic current and projected conditions of OA (390-1140 µatm pCO2 ). Survival and DNA damage was measured in the amphipods, whereas the flux of labile metals was measured in the sediment and water column (WC) using Diffusive Gradients in Thin-films. The contaminated sediments became more acutely toxic to C. volutator under elevated pCO2 (1140 µatm). There was also a 2.7-fold increase in DNA damage in amphipods exposed to the contaminated sediment at 750 µatm pCO2 , as well as increased DNA damage in organisms exposed to the reference sediment, but only at 1140 µatm pCO2 . The projected pCO2 concentrations increased the flux of nickel and zinc to labile states in the WC and pore water. However, the increase in metal flux at elevated pCO2 was equal between the reference and contaminated sediments or, occasionally, greater from reference sediments. Hence, the toxicological interaction between OA and contaminants could not be explained by e ffects of pH on metal speciation. We propose that the additive physiological effects of OA and contaminants will be more important than changes in metal speciation in determining the responses of benthos to contaminated sediments under OA. Our data demonstrate clear potential for near-future OA to increase the susceptibility of benthic ecosystems to contaminants. Environmental policy should consider contaminants within the context of changing environmental conditions. Specifically, sediment metals guidelines may need to be reevaluated to afford appropriate environmental protection under future conditions of OA.

Butyltin compounds in liver of harbour porpoises (Phocoena phocoena) from the UK prior to and following the ban on the use of tributyltin in antifouling paints (1992-2005 & 2009).

Liver butyltin concentrations (monobutyl, dibutyl and tributyltin (TBT)) in harbour porpoises (n=410) have been determined during 1992-2005, and again in 2009 following a ban on the use of tributyltin-based antifouling paints on ships. The aim was to assess the effectiveness of the regulation, which was implemented during 2003-2008. Since the ban was put in place summed butyltin concentrations have declined. Also, the percentage of animals in which TBT was detected has fallen sharply, indicating the cessation of fresh inputs. In 1992, 1993 and 1995, TBT was detected in 100% of samples analysed. In 2003-2005, once the implementation of the ban had begun, this fell to 61-72%, and in 2009, following the completion of the ban, had reduced to 4.3% (i.e. in only 1 of 23 samples analysed). Thus we conclude that the ban has proved effective in reducing TBT inputs to the seas from vessels.

Dissolved organic carbon reduces the toxicity of copper to germlings of the macroalgae, Fucus vesiculosus.

This study investigates the effects of waterborne copper exposure on germling growth in chemically defined seawater. Germlings of the macroalgae, Fucus vesiculosus were exposed to a range of copper and dissolved organic carbon (DOC as humic acid) concentrations over 14 days. Germling growth was found to be a sensitive indicator of copper exposure with total copper (TCu) and labile copper (LCu) EC(50) values of approximately 40 and 20 microg/L, respectively, in the absence of added DOC. The addition of DOC into the exposure media provided germlings with protection against copper toxicity, with an increased TCu EC(50) value of 117.3 microg/L at a corrected DOC (cDOC from humic acid only) concentration of 2.03 mg/L. The LCu EC(50) was not affected by a cDOC concentration of 1.65 mg/L or less, suggesting that the LCu concentration not the TCu concentration was responsible for inhibiting germling growth. However, at a cDOC concentration of approximately 2mg/L an increase in the LCu EC(50) suggests that the LCu concentration may play a role in the overall toxicity to the germlings. This is contrary to current understanding of aquatic copper toxicity and possible explanations for this are discussed.

Effects of dissolved organic carbon on the toxicity of copper to the developing embryos of the Pacific oyster (Crassostrea gigas).

The effects of humic acid (HA) on copper speciation and its subsequent toxicity to the sensitive early life stages of the Pacific oyster (Crassostrea gigas) are presented. Differential pulse anodic stripping voltammetry with a hanging mercury drop electrode was used to measure the copper species as labile copper (LCu; free ion and inorganic copper complexes) and total copper (TCu) with respect to increasing HA concentration. The TCu and LCu 50% effect concentrations (EC50s) in the absence of HA were 20.77 microg/L (95% confidence interval [CI], 24.02-19.97 microg/L) and 8.05 microg/L (95% CI, 9.6-5.92 microg/L) respectively. A corrected dissolved organic carbon (DOC) concentration (HA only) of 1.02 mg/L was required to significantly increase the TCu EC50 to approximately 41.09 microg/L (95% CI, 44.27-37.52 microg/L; p < 0.05), almost doubling that recorded when DOC (as HA) was absent from the test media. In contrast, the LCu EC50 was unaffected by changes in DOC concentration and was stable throughout the corrected DOC concentration range. The absence of change in the LCu EC50, despite increased HA concentration, suggests that the LCu fraction, not TCu, was responsible for the observed toxicity to the oyster embryo. This corresponds with the current understanding of copper toxicity and supports the free-ion activity model for copper toxicity.

Copper speciation survey from UK marinas, harbours and estuaries.

The use of copper in antifouling paints has increased in the UK in the last 20 years as TBT and several other organic biocides have been phased out. To assess the probable impact of copper on estuarine systems a survey was undertaken to measure the different fractions of copper present in the water column at current usage. The different fractions measured were; labile copper, (LCu) considered as both the free copper ions and inorganically bound copper, the total dissolved copper (TDCu) present, and the difference between them taken as the organically bound likely non-toxic copper fraction. The survey considered sites with different levels of boat use, namely marinas, harbours and estuaries, differing physical parameters of suspended and dissolved organic matter, different seasons of the year and different depths in the water column all of which control speciation behaviour. Suspended particulate matter (SPM) values were measured at all sites and increased from West to East coast locations (5.7-34.4 mg/l). Dissolved organic matter (DOM) values ranged from 0.58 to 2.2mg/l C. The total dissolved copper concentrations ranged from 0.30 to 6.68 microg/l, with labile fraction ranging from 0.02 to 2.69 microg/l, and most labile copper concentrations below 1 microg/l. None of the yearly mean copper measurements exceeded the 76/464/EEC EQS of 5 microg/l. Of the 306 measurements, only one dissolved copper value in one season was above 5 microg/l. This ratio of labile to total copper was between 10 and 30%. The results from this survey suggest that if toxicity of copper is due to the labile fraction then using the total dissolved copper concentrations as an indicator of impact overestimate the risk by a factor of four times.