Review: 3D cell models for organ-on-a-chip applications.

Two-dimensional (2D) cultures do not fully reflect the human organs' physiology and the real effectiveness of the used therapy. Therefore, three-dimensional (3D) models are increasingly used in bioanalytical science. Organ-on-a-chip systems are used to obtain cellular in vitro models, better reflecting the human body's in vivo characteristics and allowing us to obtain more reliable results than standard preclinical models. Such 3D models can be used to understand the behavior of tissues/organs in response to selected biophysical and biochemical factors, pathological conditions (the mechanisms of their formation), drug screening, or inter-organ interactions. This review characterizes 3D models obtained in microfluidic systems. These include spheroids/aggregates, hydrogel cultures, multilayers, organoids, or cultures on biomaterials. Next, the methods of formation of different 3D cultures in Organ-on-a-chip systems are presented, and examples of such Organ-on-a-chip systems are discussed. Finally, current applications of 3D cell-on-a-chip systems and future perspectives are covered.

Cellular uptake of biotransformed graphene oxide into lung cells.

Due to its high surface area and convenient functionalization, graphene oxide has many potential applications in biomedicine, especially as a drug carrier. However, knowledge about its internalization inside mammalian cells is still limited. Graphene oxide cellular uptake is a complex phenomenon affected by factors such as the size of the particle and modifications of its surface. Moreover, nanomaterials introduced into living organisms interact with biological fluids' components. It may further alter its biological properties. All these factors must be considered when the cellular uptake of potential drug carriers is considered. In this study, the effect of graphene oxide particle sizes on internalization efficiency into normal (LL-24) and cancerous (A549) human lung cells was investigated. Moreover, one set of samples was incubated with human serum to determine how the interaction of graphene oxide with serum components affects its structure, surface, and interaction with cells. Our findings indicate that samples incubated with serum enhance cell proliferation but enter the cells with lesser efficiency than their counterparts not incubated with human serum. What is more affinity towards the cells was higher for larger particles.

Graphene oxide internalization into mammalian cells - a review.

Due to the high surface area and convenient functionalization, graphene oxide has a significant potential application in biomedicine. It can serve as multi-purpose platform for bioimaging, gene and drug delivery, photothermal and photodynamic therapy. To implement graphene oxide in diagnostics and therapeutics successfully, it is essential to investigate its mechanisms of uptake into mammalian cells thoroughly. Herein, up to date knowledge about graphene oxide internalization pathways is presented. Nanomaterial lateral dimensions, surface modifications and biotransformation phenomenon as well as a type of the cell may play a pivotal role in a graphene oxide cellular uptake. Hence, the impact of these factors is comprehensively discussed based on so far published studies. Although great progress has been made in elucidating graphene oxide internalization pathway, there are still challenges to overcome. These are discussed along with the prospects concerning further studies in this field of science.

Exploring Endothelial Expansion on a Chip.

Angiogenesis is the development of new blood vessels from the existing vasculature. Its malfunction leads to the development of cancers and cardiovascular diseases qualified by the WHO as a leading cause of death worldwide. A better understanding of mechanisms regulating physiological and pathological angiogenesis will potentially contribute to developing more effective treatments for those urgent issues. Therefore, the main goal of the following study was to design and manufacture an angiogenesis-on-a-chip microplatform, including cylindrical microvessels created by Viscous Finger Patterning (VFP) technique and seeded with HUVECs. While optimizing the VFP procedure, we have observed that lumen's diameter decreases with a diminution of the droplet's volume. The influence of Vascular Endothelial Growth Factor (VEGF) with a concentration of 5, 25, 50, and 100 ng/mL on the migration of HUVECs was assessed. VEGF's solution with concentrations varying from 5 to 50 ng/mL reveals high angiogenic potential. The spatial arrangement of cells and their morphology were visualized by fluorescence and confocal microscopy. Migration of HUVECs toward loaded angiogenic stimuli has been initiated after overnight incubation. This research is the basis for developing more complex vascularized multi-organ-on-a-chip microsystems that could potentially be used for drug screening.

Investigation of the Therapeutic Potential of New Antidiabetic Compounds Using Islet-on-a-Chip Microfluidic Model.

Nowadays, diabetes mellitus is one of the most common chronic diseases in the world. Current research on the treatment of diabetes combines many fields of science, such as biotechnology, transplantology or engineering. Therefore, it is necessary to develop new therapeutic strategies and preventive methods. A newly discovered class of lipids-Palmitic Acid Hydroxy Stearic Acid (PAHSA) has recently been proposed as an agent with potential therapeutic properties. In this research, we used an islet-on-a-chip microfluidic 3D model of pancreatic islets (pseudoislets) to study two isomers of PAHSA: 5-PAHSA and 9-PAHSA as potential regulators of proliferation, viability, insulin and glucagon expression, and glucose-stimulated insulin and glucagon secretion. Due to the use of the Lab-on-a-chip systems and flow conditions, we were able to reflect conditions similar to in vivo. In addition, we significantly shortened the time of pseudoislet production, and we were able to carry out cell culture, microscopic analysis and measurements using a multi-well plate reader at the same time on one device. In this report we showed that under microfluidic conditions PAHSA, especially 5-PAHSA, has a positive effect on pseudoislet proliferation, increase in cell number and mass, and glucose-stimulated insulin secretion, which may qualify it as a compound with potential therapeutic properties.

Versatile and Easily Designable Polyester-Laser Toner Interfaces for Site-Oriented Adsorption of Antibodies.

Laser toners appear as attractive materials for barriers and easily laminated interphases for Lab-on-a-Foil microfluidics, due to the excellent adhesion to paper and various membranes or foils. This work shows for the first time a comprehensive study on the adsorption of antibodies on toner-covered poly(ethylene terephthalate) (PET@toner) substrates, together with assessment of such platforms in rapid prototyping of disposable microdevices and microarrays for immunodiagnostics. In the framework of presented research, the surface properties and antibody binding capacity of PET substrates with varying levels of toner coverage (0-100%) were characterized in detail. It was proven that polystyrene-acrylate copolymer-based toner offers higher antibody adsorption efficiency compared with unmodified polystyrene and PET as well as faster adsorption kinetics. Comparative studies of the influence of pH on the effectiveness of antibodies immobilization as well as measurements of surface ζ-potential of PET, toner, and polystyrene confirmed the dominant role of hydrophobic interactions in adsorption mechanism. The applicability of PET@toner substrates as removable masks for protection of foil against permanent hydrophilization was also shown. It opens up the possibility of precise tuning of wettability and antibody binding capacity. Therefore, PET@toner foils are presented as useful platforms in the construction of immunoarrays or components of microfluidic systems.

The 10th anniversary of MXenes: Challenges and prospects for their surface modification toward future biotechnological applications.

A broad family of two-dimensional (2D) materials - carbides, nitrides, and carbonitrides of early transition metals, called MXenes, became a newcomer in the flatland at the turn of 2010 and 2011 (over ten years ago). Their unique physicochemical properties made them attractive for many applications, highly boosting the development of various fields, including biotechnological. However, MXenes' functional features that impact their bioactivity and toxicity are still not fully well understood. This study discusses the essentials for MXenes's surface modifications toward their application in modern biotechnology and nanomedicine. We survey modification strategies in context of cytotoxicity, biocompatibility, and most prospective applications ready to implement in medical practice. We put the discussion on the material-structure-chemistry-property relationship into perspective and concentrate on overarching challenges regarding incorporating MXenes into nanostructured organic/inorganic bioactive architectures. It is another emerging group of materials that are interesting from the biomedical point of view as well. Finally, we present an influential outlook on the growing demand for future research in this field.

Islet-on-a-chip: Biomimetic micropillar-based microfluidic system for three-dimensional pancreatic islet cell culture.

Type 2 diabetes is currently one of the most common metabolic diseases, affecting all ages worldwide. As the incidence of type 2 diabetes increases, a growing number of studies focus on islets of Langerhans. A three-dimensional research model that maps islet morphology and maintains hormonal balance in vivo is still needed. In this work, we present an Islet-on-a-chip system, specifically a micropillar-based microfluidic platform for three-dimensional pancreatic islet cell culture and analysis. The microfluidic system consisted of two culture chambers that were equipped with 15 circular microtraps each, which were built with seven round micropillars each. Micropillars in the structure of microtraps supported cell aggregation by limiting the growth surface and minimizing wall shear stress, thereby ensuring proper medium diffusion and optimal culture conditions for cell aggregates. Our system is compatible with microwell plate readers and confocal laser scanning microscopes. Because of optimization of the immunostaining method, the appropriate cell distribution and high viability and proliferation up to 72 h of culture were confirmed. Enzyme-linked immunosorbent assays were performed to measure insulin and glucagon secretion after stimulation with different glucose concentrations. To our knowledge, this is the first Lab-on-a-chip system which enables the formation and three-dimensional culture of cell aggregates composed of commercially available α and ß pancreatic islet cells. The specific composition and arrangement of cells in the obtained model corresponds to the arrangement of the cells in rodent pancreatic islets in vivo. This Islet-on-a-chip system may be utilized to test pathogenic effectors and future therapeutic agents.

Study of Stem Cells Influence on Cardiac Cells Cultured with a Cyanide-P-Trifluoromethoxyphenylhydrazone in Organ-on-a-Chip System.

Regenerative medicine and stem cells could prove to be an effective solution to the problem of treating heart failure caused by ischemic heart disease. However, further studies on the understanding of the processes which occur during the regeneration of damaged tissue are needed. Microfluidic systems, which provide conditions similar to in vivo, could be useful tools for the development of new therapies using stem cells. We investigated how mesenchymal stem cells (MSCs) affect the metabolic activity of cardiac cells (rat cardiomyoblasts and human cardiomyocytes) incubated with a potent uncoupler of mitochondrial oxidative phosphorylation under microfluidic conditions. A cyanide p-trifluoromethoxyphenylhydrazone (FCCP) was used to mimic disfunctions of mitochondria of cardiac cells. The study was performed in a microfluidic system integrated with nanofiber mats made of poly-l-lactid acid (PLLA) or polyurethane (PU). The microsystem geometry allows four different cell cultures to be conducted under different conditions (which we called: normal, abnormal-as both a mono- and co-culture). Metabolic activity of the cells, based on the bioluminescence assay, was assessed in the culture's performed in the microsystem. It was proved that stem cells increased metabolic activity of cardiac cells maintained with FCCP.

Simulation of hypoxia of myocardial cells in microfluidic systems.

The paper presents a newly designed microfluidic system that allows simulation of myocardial hypoxia by biochemical method. The geometry of the microsystem was designed in such a way, that quantitative fluorescent measurements using a spectrofluorometric plate reader was possible. Biochemical simulation of hypoxia was carried out using potent mitochondrial oxidative phosphorylation uncoupler-Carbonyl cyanide-4-(trifluoromethoxy)phenylhydrazone (FCCP). Two cardiac cell lines were used in the study-rat cardiomyoblasts (H9C2) and human cardiomyocytes. The effectiveness of biochemical simulation of hypoxia was studied using two fluorescent dyes: carbocyanine iodide (JC-1) and Fluo-4. Changes in the mitochondrial membrane potential and concentration of intracellular calcium ions were tested. The major novelty of this research was the applying the microfluidic system to create hypoxia conditions for cardiac cells using the biochemical approach. In further studies, the presented hypoxia model could be used to develop new methods of treatment of ischemic heart disease for example in cell therapy based on stem cells.

Combinations of regenerative medicine and Lab-on-a-chip systems: New hope to restoring the proper function of pancreatic islets in diabetes.

Cases of type 2 diabetes mellitus have significantly increased in recent years. Researchers worldwide are combining their knowledge of biology, medicine, tissue engineering, and microtechnology to develop new effective treatments. An important aspect of current research is to develop of a complete model of three-dimensional pancreatic islets to test various factors that affect disease development and evaluate new therapies and drugs. Several methods have allowed the development of three-dimensional research models. The use of Lab-on-a-chip systems with appropriate microstructure geometry is a promising solution to macroscale problems. Such a device allows the development of a complete platform reflecting conditions that prevail in the body. Organ-on-a-chip platforms are successfully used mainly in studies of lung, heart, and liver diseases. This review presents the current state of knowledge on the creation of three-dimensional pancreatic islet structures in both microscale and microfluidic systems. We highlight the most important aspects of developing the geometry of such devices. We also discuss analytical detection methods that are suitable for detecting hormones that are secreted from pancreatic islets and, in combination with appropriate Lab-on-a-chip systems, can be used as a Micro Total Analysis System (µTAS).

A multilayered cancer-on-a-chip model to analyze the effectiveness of new-generation photosensitizers.

Three-dimensional (3D) cellular models of cancer tissue are necessary tools to analyze new anticancer drugs under in vitro conditions. Diagnostics and treatment of ovarian cancer are major challenges for current medicine. In our report we propose a new three-dimensional (3D) cellular model of ovarian cancer which can mimic a fragment of heterogeneous cancer tissue. We used Lab-on-a-chip technology to create a microfluidic system that allows cellular multilayer to be cultured. Cellular multilayer mimics the structure of two important elements of cancer tissue: flesh and stroma. For this reason, it has an advantage over other in vitro cellular models. We used human ovarian fibroblasts (HOF) and human ovarian cancer cells in our research (A2780). In the first stage of the study, we proved that the presence of non-malignant fibroblasts in co-culture with ovarian cancer cells stimulates the proliferation of cancer cells, which is important in the progression of ovarian cancer. In the next stage of the research, we tested the usefulness of the newly-developed cellular model in the analysis of anticancer drugs and therapies under in vitro conditions. We tested two photosensitizers (PS): free and nanoencapsulated meso-tetrafenylporphyrin, and we evaluated the potential of these drugs in anticancer photodynamic therapy (PDT) of ovarian cancer. We also studied the mechanism of PDT based on the analysis of the level of reactive oxygen species (ROS) in cell cultures. Our research confirmed that the use of new-generation PS can significantly increase the efficacy of PDT in the treatment of ovarian cancer. We also proved that the newly-developed 3D cellular model is suitable for rapid screening of anticancer drugs and has the potential to be used clinically in the future, e.g. in the selection of treatment methods for anticancer personalized medicine.

Co-delivery of IR-768 and daunorubicin using mPEG-b-PLGA micelles for synergistic enhancement of combination therapy of melanoma.

Malignant melanoma is an emerging problem worldwide due to the high degree of lethalness. Its aggressiveness and the ability to metastasize along with the heterogeneity at the molecular and cellular levels, limit the overall therapeutic efficacy. Despite significant advances in melanoma treatment over the last decade, there is still a need for improved therapeutic modalities. Thus, we demonstrate here a combinatorial approach that targets multiple independent therapeutic pathways, in which polymeric micelles (PMs) were used as efficacious colloidal nanocarriers loaded with both daunorubicin (DRB) as a cytotoxic drug and IR-768 as a photosensitizer. This afforded the dual drug loaded delivery system IR-768 + DRB in PMs. The fabricated mPEG-b-PLGA micelles (hydrodynamic diameters ≈ 25 nm) had a relatively narrow size distribution (PdI > ca. 0.3) with uniform spherical shapes. CLSM study showed that mPEG-b-PLGA micelles were uptaken by mitochondria, which further contributed to excellent singlet oxygen generation capacity for PDT in A375 melanoma cells. Furthermore, the PMs were efficiently internalized by tested cells through endocytosis, resulting in much higher cellular uptake comparing to the free drug. As a result of these properties, IR-768 + DRB in PMs exhibited very potent and synergistically enhanced anticancer activity against A375 cells. Additionally, this combination approach allowed to reduce drug doses and provided low side effects towards normal HaCaT. This study indicates excellent properties of mPEG-b-PLGA micelles resulting in great therapeutic potential possessed by the developed nanoscale drug delivery system for combined chemo-photodynamic therapy of melanoma.

Synergistic effect of the combination therapy on ovarian cancer cells under microfluidic conditions.

Ovarian cancer belongs to the group of gynecological cancers and indicates the high resistance to many drugs used in standard anticancer therapy. The treatment of ovarian cancer is a big challenge for the present medicine. In our report we tested the effectiveness of the combination anticancer therapy against ovarian cells: human ovarian carcinoma (A2780) and human ovarian fibroblasts (HOF). Two different types of drugs were used: doxorubicin (DOX) and a new-generation photosensitizer, nanoencapsulated meso-tetraphenylporphyrin (nano-TPP). The aim of the research was to compare the effect of the sequential combination therapy (chemotherapy with DOX and photodynamic therapy with nano-TPP) carried out in static and dynamic conditions. To achieve dynamic culture conditions, similar to in vivo environment, we designed a new microfluidic system in which the simultaneous, independent cultures of two cell lines (non-malignant and cancer cells) and their one-step analysis were possible. We observed that the sequential combination of photodynamic therapy (PDT) with chemotherapy allowed to obtain the synergistic effect of the treatment with using low doses of drugs. We also confirmed that the use of microfluidic conditions significantly increased the effectiveness of combination therapy and allowed for maintaining a high selectivity of the action of drugs on cancer cells. To the best of our knowledge, for the first time the microfluidic system was used to carry out sequential combination therapy against ovarian cancer.

Future Applications of MXenes in Biotechnology, Nanomedicine, and Sensors.

The past few years have seen significant developments in the chemistry and potential biological applications of 2D materials. This review focuses on recent advances in the biotechnological and biomedical applications of MXenes, which are 2D carbides, nitrides, and carbonitrides of transition metals. Nanomaterials based on MXenes can be used as therapeutics for anticancer treatment, in photothermal therapy as drug delivery platforms, or as nanodrugs without any additional modification. Furthermore, we discuss the potential use of these materials in biosensing and bioimaging, including magnetic resonance and photoacoustic imaging techniques. Finally, we present the most significant examples of the use of MXenes as efficient agents for environmental and antimicrobial treatments, as well as a brief discussion of their future prospects and challenges.

Well-defined Graphene Oxide as a Potential Component in Lung Cancer Therapy.

BACKGROUND: Graphene oxide (GO) has unique physical and chemical properties that can be used in anticancer therapy - especially as a drug carrier. Graphene oxide, due to the presence of several hybrid layers of carbon atoms (sp2), has a large surface for highly efficient drug loading. In addition, GO with a large number of carboxyl, hydroxyl and epoxy groups on its surface, can charge various drug molecules through covalent bonds, hydrophobic interactions, hydrogen bonds and electrostatic interactions. OBJECTIVE: The aim of our work was to evaluate the possibility of future use of graphene oxide as an anticancer drug carrier. METHODS: In this paper, we present GO synthesis and characterization, as well as a study of its biological properties. The cytotoxic effect of well-defined graphene oxide was tested on both carcinoma and non-malignant cells isolated from the same organ, which is not often presented in the literature. RESULTS: The performed research confirmed that GO in high concentrations (> 300 µgmL-1) selectively decreased the viability of cancer cell line. Additionally, we showed that the GO flakes have a high affinity to cancer cell nucleus which influences their metabolism (inhibition of cancer cell proliferation). Moreover, we have proved that GO in high concentrations can cause cell membrane damage and generate reactive oxygen species on a low level mainly in cancer cells. CONCLUSION: The proposed GO could be useful in anticancer therapy. A high concentration of GO selectively causes the death of tumor cells, whereas GO with low concentration could be a potential material for anticancer drug loading.

2D Ti2C (MXene) as a novel highly efficient and selective agent for photothermal therapy.

Photothermal therapy (PTT) has shown significant potential for anti-cancer modality. In this report, according to our best knowledge, we explore for the first time Ti2C-based MXene as a novel, highly efficient and selective agent for photothermal therapy (PTT). Ti2C superficially modified with PEG was obtained from the layered, commercially available Ti2AlC MAX phase in the process of etching aluminum layers using concentrated HF, and characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HREM) as well as X-ray photoelectron spectroscopy for chemical analysis (ESCA-XPS). The PEG-coated Ti2C flakes showed a satisfactory photothermal conversion efficacy (PTCE) and good biocompatibility in wide range of the tested concentrations. Through in vitro studies, the PEG-modified Ti2C demonstrated notable NIR-induced ability to cancerous cells' ablation with minimal impact on non-malignant cells up to the concentration of 37.5 µg mL-1. The applied doses of Ti2C_PEG in our work were even 24 times lower comparing other MXene-based photothermal agents. This work is expected to expand the utility of 2D MXenes to biomedical applications through the development of entirely novel agents for photothermal therapy. This work is expected to expand the utility of 2D MXenes to biomedical applications through the development of entirely novel agents for photothermal therapy.

The influence of selected ω-mercaptocarboxylate ligands on physicochemical properties and biological activity of Cd-free, zinc­copper­indium sulfide colloidal nanocrystals.

In this work core/shell cadmium-free zinc­copper­indium sulfide ZnCuInS/ZnS quantum dots (QDs) originally stabilized with hydrophilic alkanethiol were modified with 3-mercaptopropionic acid (MPA) or 6-mercaptohexanoic acid (MHA) via two-step ligand exchange method. The obtained QDs were further characterized by TEM, UV Vis, and fluorescence spectroscopy. Both types of QDs were non-toxic in a wide range of concentrations. To our knowledge, our studies are the first attempt to determine the type of cell death and reactive oxygen species production level as a result of incubation of cell cultures with ZnCuInS/ZnS QDs. Furthermore, the accumulation of QDs in vitro was examined on three human cell lines by fluorescence intensity measurements and visualized by confocal microscopy. The modification of QDs with a ligand characterized by slightly longer aliphatic chain (MHA), instead of typically used MPA turns out to be beneficial both from the point of colloidal stability, preservation of optical properties during ligand exchange as well as reflects in a higher cellular uptake. This contribution can be beneficial from the point of view of the selection of the optimal ligands and concentrations in the case of ZnCuInS/ZnS core-shell QDs for biological applications.

Studies on effectiveness of PTT on 3D tumor model under microfluidic conditions using aptamer-modified nanoshells.

Herein, we present the research focused on the synthesis and application of aptamer-modified gold nanoshells for photothermal therapy (PTT). NIR-absorbing hollow gold nanoshells were synthetized and conjugated with anti-MUC1 aptamer (HGNs@anti-MUC1). MUC1 (Mucin 1) is a transmembrane glycoprotein, which is overexpressed in a variety of epithelial cancers (eg. breast, lung, pancreatic). In order to evaluate the efficiency of PTT with HGNs@anti-MUC1 we used 3D cell culture model - multicellular spheroids. The selected cell culture model is considered as the best in vitro model for cancer research (similar morphology, metabolite and oxygen gradients, cellular interactions and cell growth kinetics in the spheroids are similar to the early stage of a nonvascular tumor). We conducted our research on human normal (MRC-5, MCF-10A) and tumor (A549, MCF-7) cell lines using a microfluidic system. Aptamer-modified nanoparticles were accumulated selectively in tumor cells (A549, MCF-7) and this fact contributed to the reduction of tumor spheroids viability and size. It should be underlined, that it is the first example of photothermal therapy carried out in a microsystem on multicellular spheroids.

Recent progress in the engineering of multifunctional colloidal nanoparticles for enhanced photodynamic therapy and bioimaging.

This up-to-date review summarizes the design and current fabrication strategies that have been employed in the area of mono- and multifunctional colloidal nanoparticles - nanocarriers well suited for photodynamic therapy (PDT) and diagnostic purposes. Rationally engineered photosensitizer (PS)-loaded nanoparticles may be achieved via either noncovalent (i.e., self-aggregation, interfacial deposition, interfacial polymerization, or core-shell entrapment along with physical adsorption) or covalent (chemical immobilization or conjugation) processes. These PS loading approaches should provide chemical and physical stability to PS payloads. Their hydrophilic surfaces, capable of appreciable surface interactions with biological systems, can be further modified using functional groups (stealth effect) to achieve prolonged circulation in the body after administration and/or grafted by targeting agents (such as ligands, which bind to specific receptors uniquely expressed on the cell surface) or stimuli (e.g., pH, temperature, and light)-responsive moieties to improve their action and targeting efficiency. These attempts may in principle permit efficacious PDT, combination therapies, molecular diagnosis, and - in the case of nanotheranostics - simultaneous monitoring and treatment. Nanophotosensitizers (nano-PSs) should possess appropriate morphologies, sizes, unimodal distributions and surface processes to be successfully delivered to the place of action after systemic administration and should be accumulated in certain tumors by passive and/or active targeting. Additionally, physically facilitating drug delivery systems emerge as a promising approach to enhancing drug delivery, especially for the non-invasive treatment of deep-seated malignant tissues. Recent advances in nano-PSs are scrutinized, with an emphasis on design principles, via the promising use of colloid chemistry and nanotechnology.