High-Performance Graphene Flexible Sensors for Pulse Monitoring and Human-Machine Interaction.

Flexible sensors are of great interest due to their potential applications in human physiological signal monitoring, wearable devices, and healthcare. However, sensor devices employed for cardiovascular testing are normally bulky and expensive, which hamper wearability and point-of-care use. Herein, we report a simple method for preparing multifunctional flexible sensors using hydrazine hydrate (N2H4·H2O) as the reducing agent, graphene as the active material, and polyethylene (PE) tape as the encapsulation material. The flexible sensor produced with this method has a low detection limit of 100 mg, a fast response and recovery time of 40 and 20 ms, and shows no performance degradation even after up to 30,000 motion cycles. The sensors we have developed are capable of monitoring the pulse with relative accuracy, which presents an opportunity to replace bulky devices and normalize cardiovascular testing in the future. In order to further broaden the application field, the sensor is installed as a sensor array to recognize objects of different weights and shapes, showing that the sensor has excellent application potential in wearable artificial intelligence.

Highly Selective Pb(II) Adsorption by DTPA-Functionalized Graphene Oxide/Carboxymethyl Cellulose Aerogel.

Graphene oxide (GO) exhibits a strong adsorption capacity for the removal of heavy metal ions from liquids, making it a topic of increasing interest among researchers. However, a significant challenge persists in the preparation of graphene oxide-based adsorbents that possess both high structural stability and excellent adsorption capacity. In this paper, a green and environmentally friendly ternary composite aerogel based on graphene was successfully synthesized. The adsorption capacity of graphene oxide was enhanced through diethylenetriaminepentaacetic acid modification, while the incorporation of composite carboxymethyl cellulose improved the structural stability of the composite aerogel in liquid. The composite aerogel demonstrates robust interactions between its components and features a multiscale porous structure. Adsorption tests conducted with Pb(II) revealed that the GO/DTPA/CMC (GDC) composite aerogel exhibits a favorable adsorption capacity. The study of adsorption kinetics and isotherms indicated that the adsorption process follows the quasi-secondary adsorption model and Freundlich adsorption model, suggesting a chemical multilayer adsorption mechanism, and the maximum adsorption capacity for Pb(II) ions was 521.917 mg/g based on the quasi-quadratic kinetic model fitting. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) analyses, performed before and after adsorption, confirmed that the adsorption of Pb(II) primarily occurs through chelation, complexation, proton exchange, and electrostatic interactions between ions and active sites such as hydroxyl and carboxyl groups. This study presents an innovative strategy for simultaneously enhancing the adsorption properties of graphene oxide-based composite aerogels and ensuring solution stability.

Modulation of supramolecular structure by stepwise removal of tert-butyl groups from tetraazaperopyrene derivatives on Ag(111).

Tert-butyl functional groups can modulate the self-assembly behavior of organic molecules on surfaces. However, the precise construction of supramolecular architectures through their controlled thermal removal remains a challenge. Herein, we precisely controlled the removal amount of tert-butyl groups in tetraazaperopyrene derivatives by stepwise annealing on Ag(111). The evolution of 4tBu-TAPP supramolecular self-assembly from the grid-like structure composed of 3tBu-TAPP through the honeycomb network formed by 2tBu-TAPP to the one-dimensional chain co-assembled by tBu-TAPP and TAPP was successfully realized. This series of supramolecular nanostructures were directly visualized by high resolution scanning tunneling microscopy. Tip manipulation and density functional theory calculations show that the formation of honeycomb network structure can be attributed to the van der Waals interactions, N-Ag-N coordination bonds, and weak C-H⋯N hydrogen bonds. Further addition of two tert-butyl groups (6tBu-TAPP) leads to a completely different assembly evolution, due to the fact that the additional tert-butyl groups affect the molecular adsorption behavior and ultimately induce desorption. This work can possibly be exploited in constructing stable and long-range ordered nanostructures in surface-assisted systems, which can also promote the development of nanostructures in functional molecular devices.

Single Atom Catalysts Remodel Tumor Microenvironment for Augmented Sonodynamic Immunotherapy.

The immunosuppressive tumor microenvironment (TME) is a huge hurdle in immunotherapy. Sono-immunotherapy is a new treatment modality that can reverse immunosuppressive TME, but the sonodynamic effects are compromised by overexpressed glutathione (GSH) and hypoxia in the TME. Herein, this work reports a new sono-immunotherapy strategy using Pdδ+ single atom catalysts to enhance positive sonodynamic responses to the immunosuppressive and sono-suppressive TME. To demonstrate this technique, this work employs rich and reductive Ti vacancies in Ti3-xC2Ty nanosheets to construct the atomically dispersed Pd-C3 single atom catalysts (SAC) with Pd content up to 2.5 wt% (PdSA/Ti3-xC2Ty). Compared with Pd nanoparticle loaded Ti3-xC2Ty, PdSA/Ti3-xC2Ty single-atom enzyme showed augmented sonodynamic effects that are ascribed to SAC facilitated electron-hole separation, rapid depletion of overexpressed GSH by ultrasound (US) excited holes, and catalytic decomposition of endogenous H2O2 for relieving hypoxia. Importantly, the sono-immunotherapy strategy can boost abscopal antitumor immune responses by driving maturation of dendritic cells and polarization of tumor-associated macrophages into the antitumoral M1 phenotype. Bilateral tumor models demonstrate the complete eradication of localized tumors and enhance metastatic regression. Th strategy highlights the potential of single-atom catalysts for robust sono-immunotherapy by remodeling the tumor microenvironment.

On-surface synthesis of two types of cyano-substituted polyfluorene derivatives via Ullmann coupling on Au(111).

Using 4-(3,6-dibromo-9H-carbazol-9-yl)benzonitrile (DBCB) precursors, we successfully constructed two types of cyano-substituted polymers on Au(111) by the molecular beam epitaxy method. According to the geometry, the two polymers are referred to as w-type polymers composed of cis-dimers and z-type polymers composed of trans-dimers. The intermediate dimers and final polymers were well characterized by high-resolution scanning tunneling microscopy (HR-STM). Moreover, the productivities of these two polymers can be controlled by adjusting the heating rate and different treatment methods. High heating rates and hot deposition can provide more ample space and time for molecular diffusion, which is conducive to the formation of w-type polymers with relatively low density. In addition, by combining scanning tunneling spectroscopy (STS) and density functional theory (DFT) calculations, we have shown that the addition of CN groups reduces the band gap of the two polymers. Our investigation thus shows the controllable construction of nanostructures through efficient surface synthesis parameters and reveals the potential of using functional groups as tools to modify the electronic properties of polymers.

Effects of strain and thickness on the mechanical, electronic, and optical properties of Cu2Te.

Two-dimensional transition-metal chalcogenides (TMCs) have attracted considerable attention because of their exceptional photoelectric properties, finding applications in diverse fields such as photovoltaics, lithium-ion batteries, catalysis, and energy conversion and storage. Recently, experimentally fabricated monolayers of semiconducting Cu2Te have emerged as intriguing materials with outstanding thermal and photoelectric characteristics. In this study, we employ first-principles calculations to investigate the mechanical, electronic, and optical properties of monolayer Cu2Te exhibiting both λ and ζ structures, considering the effects of thickness and strain. The calculations reveal the robust mechanical stability of λ-Cu2Te and ζ-Cu2Te under varying thickness and strain conditions. By applying -5% to +5% strain, the band gaps can be modulated, with ζ-Cu2Te exhibiting an indirect-to-direct transition at a biaxial strain of +5%. In addition, a semiconductor-to-metal transition is observed for both ζ-Cu2Te and λ-Cu2Te with increasing thickness. The absorption spectra of λ-Cu2Te and ζ-Cu2Te exhibit a redshift with an increase in the number of layers. These computational insights into Cu2Te provide valuable information for potential applications in nano-electromechanical systems, optoelectronics, and photocatalytic devices and may guide subsequent experimental research efforts.

N-Heterocycle Modified Graphene Quantum Dots as Topoisomerase Targeted Nanoantibiotics for Combating Microbial Infections.

Developing next-generation antibiotics to eliminate multidrug-resistant (MDR) bacteria/fungi and stubborn biofilms is challenging, because of the excessive use of currently available antibiotics. Herein, the fabrication of anti-infection graphene quantum dots (GQDs) is reported, as a new class of topoisomerase (Topo) targeting nanoantibiotics, by modification of rich N-heterocycles (pyridinic N) at edge sites. The membrane-penetrating, nucleus-localizing, DNA-binding GQDs not only damage the cell walls/membranes of bacteria or fungi, but also inhibit DNA-binding proteins, such as Topo I, thereby affecting DNA replication, transcription, and recombination. The obtained GQDs exhibit excellent broad-spectrum antimicrobial activity against non-MDR bacteria, MDR bacteria, endospores, and fungi. Beyond combating planktonic microorganisms, GQDs inhibit the formation of biofilms and can kill live bacteria inside biofilms. RNA-seq further demonstrates the upregulation of riboflavin biosynthesis genes, DNA repair related genes, and transport proteins related genes in methicillin-resistant S. aureus (MRSA) in response to the stress induced by GQDs. In vivo animal experiments indicate that the biocompatible GQDs promote wound healing in MRSA or C. albicans-infected skin wound models. Thus, GQDs may be a promising antibacterial and antifungal candidate for clinical applications in treating infected wounds and eliminating already-formed biofilms.

On-surface synthesis of Au-C4 and Au-O4 alternately arranged organometallic coordination networks via selective aromatic C-H bond activation.

Selective activation of the C-H bond of aromatic hydrocarbons is significant in synthetic chemistry. However, achieving oriented C-H activation remains challenging due to the poor selectivity of aromatic C-H bonds. Herein, we successfully constructed alternately arranged Au-C4 and Au-O4 organometallic coordination networks through selective aromatic C-H bond activation on Au(111) substrate. The stepwise reaction process of the 5, 12-dibromopyrene 3,4,9, 10-tetracarboxylic dianhydride precursor is monitored by high-resolution scanning tunneling microscopy. Our results show that the gold atoms in C-Au-C organometallic chains play a crucial role in promoting the selective ortho C-H bonds activation and forming Au-C4 coordination structure, which is further demonstrated by a comparative experiment of PTCDA precursor on Au(111). Furthermore, our experiment of 2Br-PTCDA precursor on Cu(111) substrate confirms that copper atoms in C-Cu-C organometallic chains can also assist the formation of Cu-C4 coordination structure. Our results reveal the vital effect of organometallic coordination on selective C-H bond activation of reactants, which holds promising implications for controllable on-surface synthesis.

Length-Dependent Magnetic Evolution of Anthenes on Au(111).

Nanographenes with zigzag edges, for example, anthenes, exhibit a unique nonbonding π-electron state, which can be described as a spin-polarized edge state that yields specific magnetic ground state. However, prior researches on the magnetism of anthenes with varying lengths on a surface is lacking. This study systematically fabricated anthenes with inherent zigzag carbon atoms of different lengths ranging from bisanthene to hexanthene. Their magnetic evolution on the Au(111) surface was analyzed through bond-resolved scanning probe techniques and density functional theory calculations. The analyses revealed a transition in magnetic properties associated with the length of the anthenes, arising from the imbalance between hybridization energy and the Coulomb repulsion between valence electrons. With the increasing length of the anthenes, the ground state transforms gradually from a closed-shell to an antiferromagnetic open-shell singlet, exhibiting a weak exchange coupling of 4 meV and a charge transfer-induced doublet. Therefore, this study formulated a chemically tunable platform to explore size-dependent π magnetism at the atomic scale, providing a framework for research in organic spintronics.

Boosting the Cell Performance of the SiO/Cu and SiO/PPy Anodes via In-Situ Reduction/Oxidation Coating Strategies.

Silicon monoxide (SiO) has attracted great attention due to its high theoretical specific capacity as an alternative material for conventional graphite anode, but its poor electrical conductivity and irreversible side reactions at the SiO/electrolyte interface seriously reduce its cycling stability. Here, to overcome the drawbacks, the dicharged SiO anode coated with Cu coating layer is elaborately designed by in-situ reduction method. Compared with the pristine SiO anode of lithium-ion battery (293 mAh g-1 at 0.5 A g-1 after 200 cycles), the obtained SiO/Cu composite presents superior cycling stability (1206 mAh g-1 at 0.5 A g-1 after 200 cycles). The tight combination of Cu particles and SiO significantly improves the conductivity of the composite, effectively inhibits the side-reaction between the active material and electrolyte. In addition, polypyrrole-coated SiO composites are further prepared by in-situ oxidation method, which delivers a high reversible specific capacity of 1311 mAh g-1 at 0.5 A g-1 after 200 cycles. The in-situ coating strategies in this work provide a new pathway for the development and practical application of high-performance silicon-based anode.

Highly Regioselective Cyclodehydrogenation of Diphenylporphyrin on Metal Surfaces.

Exploring the effect of porphin tautomerism on the regioselectivity of its derivatives is a big challenge, which is significant for the development and application of porphyrin drugs. In this work, we demonstrate the regioselectivity of 2H-diphenylporphyrin (H2-DPP) in the planarization reaction on Au(111) and Ag(111) substrates. H2-DPP monomer forms two configurations (anti- and syn-) via a dehydrogenation coupling, between which the yield of the anti-configuration exceeds 90%. Using high-resolution scanning tunneling microscopy, we visualize the reaction processes from the H2-DPP monomer to the final two planar products. Combined with DFT calculations of the potential reaction pathway and comparative experiments on Au(111) and Ag(111) substrates. Using M-DPP (M = Cu and Fe), we confirm that the regioselectivity of H2-DPP is derived from the reaction energy barrier during the cyclodehydrogenation reaction of different tautomers. This work reveals the regioselectivity mechanism of H2-DPP on the atomic scale, which holds great significance for understanding the chemical conversion process of organic macrocyclic molecules.

Anisotropic Free-Standing Aerogels Based on Graphene/Silk for Pressure Sensing and Efficient Adsorption.

Compressible, conductive, ultralight, and superhydrophobic graphene aerogels (GAs) are promising for wearable electronics and adsorption applications. However, the unsatisfactory sensing performances and lack of multiscale structural regulation still impede the development of multifunctional GAs. Herein, a multifunctional aerogel based on graphene/silk is reported─a highly ordered three-dimensional (3D) reduced graphene oxide (rGO) conductive network is established by an alkali-induced hydrothermal self-assembly strategy, while silk fibroin (SF) bound to graphene oxide (GO) by electrostatic interactions is uniformly distributed throughout the network. The ultralight rGO/SF aerogel (GSA) has the property that its resistance varies with compression, so it can be used for flexible pressure sensors. A GSA-based sensor can detect compressive stresses down to 0.35 kPa and has a response time of 0.55 s and a recovery time of 0.58 s. It has a good linear response from 0.5 to 30 kPa with sensitivities of 0.54 kPa-1 (0.5-4 kPa) and 0.21 kPa-1 (4-30 kPa), respectively. The GSA-based sensor also has excellent durability, remaining stable after 12,000 cycles. As proof of concept, its applications for health monitoring, speech recognition, and motion capture are shown. Furthermore, the carbonized rGO/SF aerogels (C-GSAs) with superhydrophobicity can adsorb various organic substances (146.7-278.8 g/g) and achieve oil-water separation.

Adsorption configurations and electronic properties of self-assembled C60and C70molecules on a semiconductor CuSe monolayer with periodic nanopores.

Two-dimensional (2D) supramolecular self-assembly architectures are considered one of the most significant and challenging topics in nanotechnology and modern organic chemistry. The study of these processes on surfaces is vital to achieving a higher degree of control in the design of supramolecular architecture. Herein, we report on the 2D self-assembly monolayer architectures based on C60and C70molecules on a semiconductor CuSe monolayer with periodic nanopores, which are essential for providing ideas for surface template chemistry. With the aid of low-temperature scanning tunneling microscopy/spectroscopy (LT-STM/STS) and density functional theory (DFT) calculation methods, we systematically investigate the adsorption configurations and electronic properties of C60and C70on CuSe monolayer with periodic nanopores. Our results show that both the C60and C70molecules above the nanopores will fall into the nanopores, while those on the CuSe surface will show well-defined self-assembly with various adsorption configurations. Besides, through STS measurement, the lowest unoccupied molecular orbitals (LUMOs) and characteristic peaks of fullerene molecules will be slightly different due to different adsorption configurations. This work helps us to study the adsorption behavior of the fullerene family on various kinds of semiconductor substrates, and also provides vigorous support for the development of fullerene electrical devices in the future.

Study on the mechanism of NOx reduction by NH3-SCR over a ZnXCu1-XFe2O4 catalyst.

Experimental evidence shows that CuFe2O4 exhibits excellent catalytic performance in the SCR reaction. However, there is a lack of in-depth research on its specific reaction mechanism. Our study begins by computing the adsorption model of molecules like NH3 and then goes on to examine the SCR reaction mechanism of NH3 on CuFe2O4 before and after Zn doping. The results indicate that NH3 is chemically adsorbed (-1.26 eV) on the surface and has a strong interaction with the substrate. Importantly, Zn doping provides more favorable reactive sites for NH3 molecules. Subsequent investigation into the NH3 dehydrogenation and SCR reaction processes showed that incorporating Zn can greatly decrease the energy barrier of the most critical step in the reaction (0.58 eV). Additionally, the study also assesses the feasibility of the reaction of adsorbed NO with surface active O atoms to form NO2 (barrier 0.86 eV). Lastly, the sulfur resistance of the catalyst before and after doping is calculated and analyzed, and it is found that Zn doping effectively improves the sulfur resistance. Our study provides valuable theoretical guidance for the development of ferrite spinel and doping modification.

The versatile characteristics of Ars/SGaInS van der Waals heterostructures.

Two-dimensional (2D) materials with upright stacking form layered van der Waals heterostructures (vdWHs) are currently believed to be attractive prospects for optoelectronic, photocatalytic, and thermoelectric devices because they can merge the capabilities of distinct 2D materials. Herein, we evaluate the electronic, optical, photocatalytic, and thermoelectric response of model-I and model-II of Ars/SGaInS vdWHs via first-principles computations. The energetic, dynamical, and thermal stabilities of these vdWHs suggest great promise in experimental functionality. Model-I and model-II are indirect semiconductors with type-II band alignment and bandgaps of 1.53 eV and 1.86 eV, respectively. The built-in electric field considerably accelerates the transmission of electrons from the Ars layer to the SGaInS layer. Compared to pristine monolayers, both models contain appropriate band edge positions to ensure overall water splitting efficiently. Interestingly, at -8% compressive strain, model-I secures type-III band alignment, which is very advantageous for field-effect transistors. In the visible and ultraviolet zones of the radiating spectrum, the proposed vdWHs significantly improved the absorption spectra, and the biaxial strain also has a considerable impact on optical absorption. The investigated vdWHs have high Seebeck coefficients and substantial electrical conductivities, which contribute to high power factor values, particularly at 700 K. The outcomes specify that our designed Ars/SGaInS vdWHs have a multifunctional character that can perform a better role in optoelectronics, photovoltaics, photocatalysis, tunneling field effect transistors, and thermoelectric devices.

A family of robust Dirac cone materials: two-dimensional hexagonal M3X2 (M = Zn/Cd/Hg, X = Si/Ge).

The fascinating Dirac cone, which has produced some excellent properties in graphene, such as ballistic charge transport, ultra-high carrier mobility and the quantum Hall effect, has motivated researchers to design and study more two dimensional (2D) Dirac materials. In this work, we have designed a family of 2D Dirac cone materials M3X2 (M = Zn/Cd/Hg, X = Si/Ge) and studied their superior properties by first principles calculation. The calculated cohesive energy, phonon dispersion and ab initio molecular dynamics confirmed the energetic, dynamic and thermodynamic stability of Zn3Ge2, Cd3Ge2, Hg3Si2, and Cd3Si2 monolayers. It was found that the intrinsic Dirac cones exist in the electronic structure of the Zn3Ge2, Cd3Ge2, Hg3Si2 and Cd3Si2 monolayers. Their Fermi velocities are from 3.26 × 105 m s-1 to 4.32 × 105 m s-1 (8.2 × 105 m s-1 for graphene). It is noteworthy that the Dirac cone in the M3X2 structure is robust. It is independent of external strain (from -7% to +19%) and can also be preserved as one-dimensional zigzag nanoribbons and multilayers (from two to three-layers). Our work shows that the novel M3X2 Dirac cone materials are an important candidate for high-speed nanoelectronic devices.

Real-space imaging of a phenyl group migration reaction on metal surfaces.

The explorations to extend present chemical synthetic methods are of great importance to simplify synthetic routes of chemical species. Additionally, understanding the chemical reaction mechanisms is critical to achieve controllable synthesis for applications. Here, we report the on-surface visualization and identification of a phenyl group migration reaction of 1,4-dimethyl-2,3,5,6-tetraphenyl benzene (DMTPB) precursor on Au(111), Cu(111) and Ag(110) substrates. With the combination of bond-resolved scanning tunneling microscopy (BR-STM), noncontact atomic force microscopy (nc-AFM) and density functional theory (DFT) calculations, the phenyl group migration reaction of DMTPB precursor is observed, forming various polycyclic aromatic hydrocarbons on the substrates. DFT calculations reveal that the multiple-step migrations are facilitated by the hydrogen radical attack, inducing cleavage of phenyl groups and subsequent rearomatization of the intermediates. This study provides insights into complex surface reaction mechanisms at the single molecule level, which may guide the design of chemical species.

High Photocatalytic Hydrogen Production of Ag@TiO2 with Different Sizes by Simple Chemical Synthesis.

The photocatalytic enhancement of sliver-based metals compounded with semiconductor materials has been demonstrated. However, there are relatively few studies on the effect of particle size in the system on photocatalytic performance. In this paper, silver nanoparticles of two different sizes, 25 and 50 nm, were prepared by a wet chemical method and subsequently sintered to obtain a photocatalyst with a core-shell structure. The photocatalyst Ag@TiO2-50/150 prepared in this study has a hydrogen evolution rate as high as 4538.90 µmol·g-1·h-1. It is interesting to find that when the ratio of silver core size to composite size is 1:3, the hydrogen yield is almost not affected by the silver core diameter, and the hydrogen production rate is basically the same. In addition, the rate of hydrogen precipitation in air for 9 months was still more than 9 times those of previous studies. This provides a new idea for the study of the oxidation resistance and stability of photocatalysts.

A prognostic model based on necroptosis-related genes for prognosis and therapy in bladder cancer.

Bladder cancer, one of the most prevalent malignant cancers, has high rate of recurrence and metastasis. Owing to genomic instability and high-level heterogeneity of bladder cancer, chemotherapy and immunotherapy drugs sensitivity and lack of prognostic markers, the prognosis of bladder cancer is unclear. Necroptosis is a programmed modality of necrotic cell death in a caspase-independent form. Despite the fact that necroptosis plays a critical role in tumor growth, cancer metastasis, and cancer patient prognosis, necroptosis-related gene sets have rarely been studied in bladder cancer. As a result, the development of new necroptosis-related prognostic indicators for bladder cancer patients is critical. Herein, we assessed the necroptosis landscape of bladder cancer patients from The Cancer Genome Atlas database and classified them into two unique necroptosis-related patterns, using the consensus clustering. Then, using five prognosis-related genes, we constructed a prognostic model (risk score), which contained 5 genes (ANXA1, DOK7, FKBP10, MAP1B and SPOCD1). And a nomogram model was also developed to offer the clinic with a more useful prognostic indicator. We found that risk score was significantly associated with clinicopathological characteristics, TIME, and tumor mutation burden in patients with bladder cancer. Moreover, risk score was a valid guide for immunotherapy, chemotherapy, and targeted drugs. In our study, DOK7 was chosen to further verify our prognosis model, and functional assays indicated that knockdown the expression of DOK7 could prompt bladder cancer proliferation and migration. Our work demonstrated the potential role of prognostic model based on necroptosis genes in the prognosis, immune landscape and response efficacy of immunotherapy of bladder cancer.

Compressive strain induced superior HER performance of nickel in alkaline solution.

The HER requires a highly efficient, cost-effective, and stable catalyst to adapt to the large-scale hydrogen industry. Nickel has been confirmed to be useful to drive the water splitting reaction, but the intrinsic performance remains unsatisfactory. In this work, nickel (EG-Ni) with compressive strain was prepared through a one-step electrochemical deposition strategy. It shows an outstanding enhancement for the HER, and it achieves a current density of 10 mA cm-2 at a low overpotential of 85.9 mV. A long-term durability test proves that the EG-Ni can tolerate a large current density of 100 mA cm-2, and the overpotential remains steady without dramatically increasing. Such a low overpotential and superior stability are attributed to the optimized adsorption energy on the catalyst surface, as evidenced by the downshifted position of the d-band center.