Sandwich d/f Heterometallic Complexes [(Ln(hfac)3)2M(acac)3] (Ln = La, Pr, Sm, Dy and M = Co; Ln = La and M = Ru).

Sandwich d/f heterometallic complexes [(Ln(hfac)3)2M(acac)3] (Ln = La, Pr, Sm, Dy and M = Co; Ln = La and M = Ru) were prepared in strictly anhydrous conditions reacting the formally unsaturated fragment [Ln(hfac)3] and [M(acac)3] in a 2-to-1 molar ratio. These heterometallic complexes are highly sensitive to moisture. Spectroscopic observation revealed that on hydrolysis, these compounds yield dinuclear heterometallic compounds [Ln(hfac)3M(acac)3], prepared here for comparison purposes only. Quantum mechanical calculations supported, on the one hand, the hypothesis on the geometrical arrangement obtained from ATR-IR and NMR spectra and, on the other hand, helped to rationalize the spontaneous hydrolysis reaction.

Understanding Stabilization Factors in Heterodinuclear Ln-Al Complexes from DFT Simulations on Thermochemistry Data: A Counterintuitive Conclusion.

This study validates a computational protocol to predict the stability of heterodinuclear complexes by varying ligands on both moieties and analyzing the reaction Gibbs free energy (ΔGr) values. To this purpose, a series of Eu-Al complexes with the general formula [Eu(LEu)3Al(LAl)3], where LEu is the ligand of europium and LAl is an oxygen donor ligand of aluminum, is used. The nature of the bridging bonds and thermochemical characteristics (ΔGr, enthalpy, and entropy) of the complexes were evaluated via DFT calculations. We demonstrated that both entropic and enthalpic effects play a relevant role in the stability. The analysis of the series allows us to identify three ΔGr ranges where heterodinuclear complexes are (i) stable and easy to characterize, (ii) fragile and difficult to characterize, and (iii) not observed (unreacted precursors are recovered). To rationalize the trend of the stability and correlate it with the chemical nature of the ligands, we investigated the condensed Fukui function on the Al fragment. Results suggest that to obtain stable heteronuclear complexes, it is necessary to consider ligands with small condensed Fukui function values. This corresponds to a less nucleophilic oxygen site, yet counterintuitively, it allows the ligand to delocalize the received electronic charge and stabilize the complex.

Aluminium 8-Hydroxyquinolinate N-Oxide as a Precursor to Heterometallic Aluminium-Lanthanide Complexes.

A reaction in anhydrous toluene between the formally unsaturated fragment [Ln(hfac)3] (Ln3+ = Eu3+, Gd3+ and Er3+; Hhfac = hexafluoroacetylacetone) and [Al(qNO)3] (HqNO = 8-hydroxyquinoline N-oxide), here prepared for the first time from [Al(OtBu)3] and HqNO, affords the dinuclear heterometallic compounds [Ln(hfac)3Al(qNO)3] (Ln3+ = Eu3+, Gd3+ and Er3+) in high yields. The molecular structures of these new compounds revealed a dinuclear species with three phenolic oxygen atoms bridging the two metal atoms. While the europium and gadolinium complexes show the coordination number (CN) 9 for the lanthanide centre, in the complex featuring the smaller erbium ion, only two oxygens bridge the two metal atoms for a resulting CN of 8. The reaction of [Eu(hfac)3] with [Alq3] (Hq = 8-hydroxyquinoline) in the same conditions yields a heterometallic product of composition [Eu(hfac)3Alq3]. A recrystallization attempt from hot heptane in air produced single crystals of two different morphologies and compositions: [Eu2(hfac)6Al2q4(OH)2] and [Eu2(hfac)6(µ-Hq)2]. The latter compound can be directly prepared from [Eu(hfac)3] and Hq at room temperature. Quantum mechanical calculations confirm (i) the higher stability of [Eu(hfac)3Al(qNO)3] vs. the corresponding [Eu(hfac)3Alq3] and (ii) the preference of the Er complexes for the CN 8, justifying the different behaviour in terms of the Lewis acidity of the metal centre.

A local point of view of the Cu(100) → NiTPP charge transfer at the NiTPP/Cu(100) interface.

A precise understanding, at the molecular level, of the massive substrate → adsorbate charge transfer at the NiTPP/Cu(100) interface has been gained through the application of elementary symmetry arguments to the structural determination of the NiTPP adsorption site by photoelectron diffraction (PED) measurements and Amsterdam density functional calculations of the free D4h NiTPP electronic structure. In particular, the PED analysis precisely determines that, among the diverse NiTPP chemisorption sites herein considered (fourfold hollow, atop, and bridge), the fourfold hollow one is the most favorable, with the Ni atom located at 1.93 Å from the surface and at an internuclear distance of 2.66 Å from the nearest-neighbors of the substrate. The use of elementary symmetry considerations enabled us to provide a convincing modeling of the NiTPP-Cu(100) anchoring configuration and an atomistic view of the previously revealed interfacial charge transfer through the unambiguous identification of the adsorbate π* and σ* low-lying virtual orbitals, of the substrate surface atoms, and of the linear combinations of the Cu 4s atomic orbitals involved in the substrate → adsorbate charge transfer. In addition, the same considerations revealed that the experimentally reported Ni(II) → Ni(I) reduction at the interface corresponds to the fingerprint of the chemisorption site of the NiTPP on Cu(100).

Correction: The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides.

Correction for 'The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides' by Girolamo Casella et al., Phys. Chem. Chem. Phys., 2023, https://doi.org/10.1039/d3cp02024j.

The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides.

We have investigated using DFT methods the reaction mechanism of the Radzisewski reaction to obtain an amide via the reaction of ACN and H2O2 under alkaline conditions. The direct reaction between ACN and H2O2 showed a quite high activation energy (about 45 kcal mol-1) rendering this path unreliable. Instead, a fast reaction between ACN and HOO- forming the deprotonated species (PAIA-) of the peroxyacetimidic acid (PAIA) was observed. From this, PAIA- was guessed to form PAIA through a fast reaction of hydrolysis. Moreover, a second way of formation of PAIA, through an OH- catalyzed path, made the rate determining step (RDS) in very good agreement with experimental data, hence neglecting the contribution of the kinetically favored hydrolysis of PAIA-. This discrepancy was reconciled by considering that the final amide was obtained through a regioselective path forming the PAIA and the further reaction involving the decomposition of PAIA and PAIA-. Indeed, the PAIA obtained from the hydrolysis reaction showed a configuration which did not match the configurational behavior required. Conversely, the PAIA formed from the RDS path matched the required configuration needed to obtain the amide. Our findings also disentangled the experimenal debate on the assignment of the RDS.

Competing excitation paths in luminescent heterobimetallic Ln-Al complexes: Unraveling interactions via experimental and theoretical investigations.

The interest for heterometallic lanthanide-d or-p metal (Ln-M) complexes is growing because of a potential cooperative or synergistic effect related to the proximity of two different metals in the same molecular architecture affording special tunable physical properties. To exploit the potentiality of Ln-M complexes, suitable synthetic approaches, and the in-depth understanding of the effect of each building block on their properties are mandatory. Here, we report the study on a family of heterometallic luminescent complexes [Ln(hfac)3Al(L)3], Ln= Eu3+ and Tb3+. Using different L ligands, we investigated the effect of the steric and electronic properties of the Al(L)3 fragment, highlighting the general validity of the employed synthetic route. A marked difference in the light emission of [Eu(hfac)3Al(L)3] and [Tb(hfac)3Al(L)3] complexes has been observed. Thanks to photoluminescence experiments and Density Functional Theory calculations, Ln3+ emissions are explained with a model involving two non-interacting excitation paths through hfac or Al(L)3 ligands.

Cyclo- and Polyphosphazenes for Biomedical Applications.

Cyclic and polyphosphazenes are extremely interesting and versatile substrates characterized by the presence of -P=N- repeating units. The chlorine atoms on the P atoms in the starting materials can be easily substituted with a variety of organic substituents, thus giving rise to a huge number of new materials for industrial applications. Their properties can be designed considering the number of repetitive units and the nature of the substituent groups, opening up to a number of peculiar properties, including the ability to give rise to supramolecular arrangements. We focused our attention on the extensive scientific literature concerning their biomedical applications: as antimicrobial agents in drug delivery, as immunoadjuvants in tissue engineering, in innovative anticancer therapies, and treatments for cardiovascular diseases. The promising perspectives for their biomedical use rise from the opportunity to combine the benefits of the inorganic backbone and the wide variety of organic side groups that can lead to the formation of nanoparticles, polymersomes, or scaffolds for cell proliferation. In this review, some aspects of the preparation of phosphazene-based systems and their characterization, together with some of the most relevant chemical strategies to obtain biomaterials, have been described.

Helicate versus Mesocate in Quadruple-Stranded Lanthanide Cages: A Computational Insight.

To drive the synthesis of metallo-supramolecular assemblies (MSAs) and to fully exploit their functional properties, robust computational tools are crucial. The capability to model and to rationalize different parameters that can influence the outcome is mandatory. Here, we report a computational insight on the factors that can determine the relative stability of the supramolecular isomers helicate and mesocate in lanthanide-based quadruple-stranded assemblies. The considered MSAs have the general formula [Ln2L4]2- and possess a cavity suitable to allocate guests. The analysis was focused on three different factors: the ligand rigidity and the steric hindrance, the presence of a guest inside the cavity, and the guest dimension. Three different quantum mechanical calculation set-ups (in vacuum, with the solvent, and with the solvent and the dispersion correction) were considered. Comparison between theoretical and experimental outcomes suggests that all calculations correctly estimated the most stable isomer, while the inclusion of the dispersion correction is mandatory to reproduce the geometrical parameters. General guidelines can be drawn: less rigid and less bulky is the ligand and less stable is the helicate, and the presence of a guest can strongly affect the isomerism leading to an inversion of the stability by increasing the guest size when the ligand is flexible.

The Magnetic Behaviour of CoTPP Supported on Coinage Metal Surfaces in the Presence of Small Molecules: A Molecular Cluster Study of the Surface trans-Effect.

Density functional theory, combined with the molecular cluster model, has been used to investigate the surface trans-effect induced by the coordination of small molecules L (L = CO, NH3, NO, NO2 and O2) on the cobalt electronic structure of cobalt tetraphenylporphyrinato (CoTPP) surface-supported on coinage metal surfaces (Cu, Ag, and Au). Regardless of whether L has a closed- or an open-shell electronic structure, its coordination to Co takes out the direct interaction between Co and the substrate eventually present. The CO and NH3 bonding to CoTPP does not influence the Co local electronic structure, while the NO (NO2 and O2) coordination induces a Co reduction (oxidation), generating a 3d8 CoI (3d6 CoIII) magnetically silent closed-shell species. Theoretical outcomes herein reported demonstrate that simple and computationally inexpensive models can be used not only to rationalize but also to predict the effects of the Co-L bonding on the magnetic behaviour of CoTPP chemisorbed on coinage metals. The same model may be straightforwardly extended to other transition metals or coordinated molecules.

Nature of the Ligand-Centered Triplet State in Gd3+ ß-Diketonate Complexes as Revealed by Time-Resolved EPR Spectroscopy and DFT Calculations.

A series of Gd3+ complexes (Gd1-Gd3) with the general formula GdL3(EtOH)2, where L is a ß-diketone ligand with polycyclic aromatic hydrocarbon substituents of increasing size (1-3), was studied by combining time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy and DFT calculations to rationalize the anomalous spectroscopic behavior of the bulkiest complex (Gd3) through the series. Its faint phosphorescence band is observed only at 80 K and it is strongly red-shifted (∼200 nm) from the intense fluorescence band. Moreover, the TR-EPR spectral analysis found that triplet levels of 3/Gd3 are effectively populated and have smaller |D| values than those of the other compounds. The combined use of zero-field splitting and spin density delocalization calculations, together with spin population analysis, allows us to explain both the large red shift and the low intensity of the phosphorescence band observed for Gd3. The large red shift is determined by the higher delocalization degree of the wavefunction, which implies a larger energy gap between the excited S1 and T1 states. The low intensity of the phosphorescence is due to the presence of C-H groups which favor non-radiative decay. These groups are present in all complexes; nevertheless, they have a relevant spin density only in Gd3. The spin population analysis on NaL models, in which Na+ is coordinated to a deprotonated ligand, mimicking the coordinative environment of the complex, confirms the outcomes on the free ligands.

cis-[(η5-C5H5)Fe(η1-CO)(µ-CO)]2, the poor relative between cis and trans tautomers. A theoretical study of the gas-phase Fe L3-edge and C and O K-edge XAS of trans-/cis-[(η5-C5H5)Fe(η1-CO)(µ-CO)]2.

The relative stability of trans-[(η5-C5H5)Fe(η1-CO)(µ-CO)]2 (trans-I) and cis-I tautomers in a vacuum and in solvents with different dielectric constants (ε) has been investigated by exploiting density functional theory (DFT). Theoretical results indicate that, in agreement with experimental evidence, trans-I is more stable than cis-I in a vacuum (∼1.5 kcal mol-1; ε = 1), while the opposite is true in media with ε > 7. Differently from solution, DFT outcomes pertaining to the vapor-phase cis-I ⇆ trans-I equilibrium at T = 368 K, the temperature at which the Fe L2,3-edges and the C and O K-edge X-ray absorption spectroscopy (XAS) data of I have been recorded, ultimately indicate the trans-I predominance (∼93%). Compositions, oscillator strengths (f) and excitation energy (EE) values of cis-I transitions substantially mirror those of trans-I; nevertheless, the weighted cis-If(EE) distributions negligibly contribute to the diverse simulated XA spectra of I.

Multireference Ab Initio Investigation on Ground and Low-Lying Excited States: Systematic Evaluation of J-J Mixing in a Eu3+ Luminescent Complex.

A theoretical protocol combining density functional theory (DFT) and multireference (CAS) calculations is proposed for a Eu3+ complex. In the complex, electronic levels of the central Eu3+ ion are correctly calculated at the CASPT2 level of theory, and the effect of introducing different numbers of states in the configuration interaction matrices is highlighted as well as the shortcomings of DFT methods in the treatment of systems with high spin multiplicity and strong spin-orbit coupling effects. For the 5D0 state energy calculation, the inclusion of states with different multiplicity and the number of states considered for each multiplicity are crucial parameters, even if their relative weight is different. Indeed, the addition of triplet and singlets is important, while the number of states is relevant only for the quintets. The herein proposed protocol enables a rigorous, full ab initio treatment of Eu3+ complex, which can be easily extended to other Ln3+ ions.

Ferrous to Ferric Transition in Fe-Phthalocyanine Driven by NO2 Exposure.

Due to its unique magnetic properties offered by the open-shell electronic structure of the central metal ion, and for being an effective catalyst in a wide variety of reactions, iron phthalocyanine has drawn significant interest from the scientific community. Nevertheless, upon surface deposition, the magnetic properties of the molecular layer can be significantly affected by the coupling occurring at the interface, and the more reactive the surface, the stronger is the impact on the spin state. Here, we show that on Cu(100), indeed, the strong hybridization between the Fe d-states of FePc and the sp-band of the copper substrate modifies the charge distribution in the molecule, significantly influencing the magnetic properties of the iron ion. The FeII ion is stabilized in the low singlet spin state (S=0), leading to the complete quenching of the molecule magnetic moment. By exploiting the FePc/Cu(100) interface, we demonstrate that NO2 dissociation can be used to gradually change the magnetic properties of the iron ion, by trimming the gas dosage. For lower doses, the FePc film is decoupled from the copper substrate, restoring the gas phase triplet spin state (S=1). A higher dose induces the transition from ferrous to ferric phthalocyanine, in its intermediate spin state, with enhanced magnetic moment due to the interaction with the atomic ligands. Remarkably, in this way, three different spin configurations have been observed within the same metalorganic/metal interface by exposing it to different doses of NO2 at room temperature.

A Theoretical Study of the Occupied and Unoccupied Electronic Structure of High- and Intermediate-Spin Transition Metal Phthalocyaninato (Pc) Complexes: VPc, CrPc, MnPc, and FePc.

The structural, electronic, and spectroscopic properties of high- and intermediate-spin transition metal phthalocyaninato complexes (MPc; M = V, Cr, Mn and Fe) have been theoretically investigated to look into the origin, symmetry and strength of the M-Pc bonding. DFT calculations coupled to the Ziegler's extended transition state method and to an advanced charge density and bond order analysis allowed us to assess that the M-Pc bonding is dominated by σ interactions, with FePc having the strongest and most covalent M-Pc bond. According to experimental evidence, the lightest MPcs (VPc and CrPc) have a high-spin ground state (GS), while the MnPc and FePc GS spin is intermediate. Insights into the MPc unoccupied electronic structure have been gained by modelling M L2,3-edges X-ray absorption spectroscopy data from the literature through the exploitation of the current Density Functional Theory variant of the Restricted Open-Shell Configuration Interaction Singles (DFT/ROCIS) method. Besides the overall agreement between theory and experiment, the DFT/ROCIS results indicate that spectral features lying at the lowest excitation energies (EEs) are systematically generated by electronic states having the same GS spin multiplicity and involving M-based single electronic excitations; just as systematically, the L3-edge higher EE region of all the MPcs herein considered includes electronic states generated by metal-to-ligand-charge-transfer transitions involving the lowest-lying π* orbital (7eg) of the phthalocyaninato ligand.

Antenna triplet DFT calculations to drive the design of luminescent Ln3+ complexes.

Density functional theory-based methods have been exploited to look into the structural, vibrational and electronic properties of antenna ligands, all of them being crucial factors for the reliable design of customized luminescent lanthanide (Ln3+) complexes. The X-ray structures, UV-Vis absorption spectra and triplet (T1) energies of three novel ß-diketone ligands with a thienyl group and naphthyl (L1), phenanthryl (L2), and pyrenyl (L3) polycyclic aromatic hydrocarbons as substituents have been modelled. Vibronic progressions provide a strong contribution to the L1 and L2 absorption spectra, while the L3 absorption spectrum needs the assumption of different conformational isomers in solution. T1 energies have been estimated either through the vertical- or the adiabatic-transition approach. The comparison with the phosphorescence spectra of Gd3+ complexes allowed us to infer that the latter approach is the most suitable one, in particular when sizable ligands are involved. Results obtained for the isolated antennas can be directly compared with those of the corresponding Ln3+ complexes, due to the unanimously accepted assumption that the excitation is ligand-centred.

On-surface synthesis of extended linear graphyne molecular wires by protecting the alkynyl group.

In this paper we report on the use of an Ullmann-like aryl halide homocoupling reaction to obtain long Graphyne Molecular Wires (GY MWs) organized in dense, ordered arrays. Instead of using highly reactive terminal alkynes, we resort to a precursor wherein the acetylenic functional group is internal, namely protected by two phenyl rings, each bearing a Br atom in the para position to allow for linear homocoupling. In addition, two further factors concur with the production of dense and highly ordered arrays of very long GY MWs, namely the geometric compatibility between the substrate and both the organometallic intermediates and the final polymeric products of the synthesis, coupled with the presence of surface-adsorbed bromine atoms separating the MWs, which minimize inter-wire cross-linking secondary reactions.

Comparative Experimental and Theoretical Study of the C and O K-Edge X-ray Absorption Spectroscopy in Three Highly Popular, Low Spin Organoiron Complexes: [Fe(CO)5], [(η5-C5H5)Fe(CO)(µ-CO)]2, and [(η5-C5H5)2Fe].

The unoccupied electronic structures of three closed-shell, highly popular organoiron complexes ([Fe(CO)5], [(η5-C5H5)Fe(CO)(µ-CO)]2, and [(η5-C5H5)2Fe]; 0, I, and II, respectively) have been investigated both experimentally and theoretically by combining original gas-phase X-ray absorption spectroscopy (XAS) outcomes recorded at the C and O K-edge with results of scalar relativistic time-dependent density functional calculations carried out within the zeroth order regular approximation. Experimental evidence herein discussed complement the Fe L2,3-edges XAS ones we recently recorded, modeled, and assigned for the same complexes (Carlotto et al. Inorg. Chem. 2019, 58, 5844). The first-principle simulation of the C and O K-edge features allowed us to univocally identify the electronic states associated to the ligand-to-metal charge transfer (LMCT) transitions both in I and in II. At variance to that, LMCT transitions with sizable oscillator strengths do not play any role in determining neither the C nor the O K-edge spectral pattern of 0. The higher π-acceptor capability of the CO ligand, regardless of its terminal or bridging coordination, with respect to [(η5-C5H5)]- is herein ultimately confirmed.

Coordinative unsaturated CuI entities are crucial intermediates governing cell internalization of copper. A combined experimental ESI-MS and DFT study.

Model peptides relevant to hCtr1 transchelate CuI from the anti-tumour [CuI(PTA)4]+ complex before metal internalization into tumor cells. ESI(+)MS experiments corroborated by DFT calculations indicate that tetracoordinated-CuII and linear-CuI arrangements of in situ generated copper-peptide products play a crucial role in promoting the transfer of copper from the terminal MDH portion into adjacent HSH peptide sequence.

New light on an old debate: does the RCN-PtCl2 bond include any back-donation? RCN←PtCl2 backbonding vs. the IR νC[triple bond, length as m-dash]N blue-shift dichotomy in organonitriles-platinum(ii) complexes. A thorough density functional theory - energy decomposition analysis study.

For a series of organonitrile [RCN (R = Me, CF3, Ph, CH3Ph, CF3Ph)] ligands, the nature of the N-Pt bond in the related cis-/trans-(RCN)2PtCl2 complexes has been computationally investigated by Density Functional Theory. A fragment based bond analysis has been performed in the canonical Kohn-Sham molecular orbitals framework, and it has been ultimately assessed that this bond is characterized both by N→Pt σ and by N←Pt π contributions. Voronoi Deformation Density charges further confirms the occurrence of N←Pt π interactions. Moreover, the Energy Decomposition Analysis-Natural Orbital for Chemical Valence (EDA-NOCV) method shows that the strength of the N←Pt π interaction is not negligible by contributing to about 30-40% of the total orbital interaction. Finally, the well-known νC[triple bond, length as m-dash]N blue-shift occurring upon coordination to PtII, has been thoroughly investigated by exploiting the EDA-NOCV and by evaluating νC[triple bond, length as m-dash]N and force constants. The origin of the νC[triple bond, length as m-dash]N blue-shift in these systems has been discussed on the basis of the CN bond polarization. N←Pt π backbonding causes only a systematic decrease of the observed νC[triple bond, length as m-dash]N blue-shift when compared to the one calculated for RCN-X (X = H+, alkaline, Lewis acids) herein reported (X = purely σ acceptors).