N-doped lignin-based activated carbon aerogel derived from bamboo black pulp liquor for efficient removal of malachite green in wastewater.

In this study, a lignin-based aerogel (LA) was prepared through acid precipitation of BPBL, followed by sol-gel method and freeze-drying. Additionally, a one-step activation-carbonization method was used to acquire nitrogen-doped lignin-based activated carbon aerogel (NLACA). The adsorption and catalytic degradation performance for malachite green (MG) were examined. The specific surface area of NLACA after N-doping was 2644.5 m2/g. The adsorption capacity for MG was increased to 3433 mg/g with the presence of nitrogenous functional groups on surface of NLACA compared without N-doping. Meanwhile, non-radical singlet oxygen is the primary active substance and degradation efficiency arrives at 91.8% after the catalytic degradation within 20 min and it has good stability and reuse. Three possible degradation pathways during degradation were analyzed by LC-MS technique. The adsorption isotherm and kinetic data demonstrated conformity with both the Langmuir model and the pseudo-second-order kinetic model. The primary mechanisms of the adsorption for MG dyes on NLACA include hydrogen bonding, π-π interactions, attraction of electrostatic and pore filling. Hence, NLACA derived from BPBL acts as a cost-effective and high-performance adsorbent and catalyst for removal of MG in dye wastewater. This concept introduces an innovative approach of "treatment of waste with waste" for developing a low-consumption, high-efficiency dye wastewater treatment and provides significant reference to treatment dye wastewater.

Bamboo charcoal fiber bundles loaded MOF-derived magnetic Co/CoO porous polyhedron for efficiently catalytic degradation of tetracyclines hydrochloride.

The health of living things and the ecosystem of the planet have both been negatively impacted by antibiotic residue in the water environment. There has been a lot of interest in the catalyst made of metal-carbon compounds from MOFs as a potential solution for activating peroxymonosulfate (PMS) to produce reactive oxygen species to catalyze the degradation of residual antibiotics. In this study, zeolitic imidazolate frameworks (ZIF-67) on bamboo fiber bundles (BFB) were pyrolyzed to produce magnetic Co/CoO nanoparticles with porous polyhedrons mounted on bamboo charcoal fiber bundles (BCFB)(BCFB@PCo/CoO). Specific surface area of obtained BCFB@PCo/CoO with abundant active sites arrives at 302.41 m2/g. The catalytic degradation efficiency of Tetracycline hydrochloride (TCH), a target contaminant, could reach up to 99.94% within 15 minutes (PMS = 0.4g/L, Cat. = 0.2g/L). The effects of potential factors, including PMS dosage, interference ions, and temperature, on catalytic degradation efficiencies were investigated. Magnetic recovery and antimicrobial properties of the BCFB@PCo/CoO were also evaluated and the possible degradation pathways were explored. Catalytic mechanism explorations of BCFB@PCo/CoO/PMS system reveal MOF-derived magnetic Co/CoO nanoparticles embedded in BCFB promote the synergistic interaction of both radicals and non-radical pathways for catalytic degradation of TCH. The novel BCFB@PCo/CoO provides an alternative to deal with wastewater containing antibiotics.

Bamboo cellulose-derived activated carbon aerogel with controllable mesoporous structure as an effective adsorbent for tetracycline hydrochloride.

Activated carbon has been widespread applied in the removal of pollutants in wastewater. However, many biomass-derived activated carbon suffer from the challenge of controllable pore size regulation, hindering their efficient adsorption of pollutants. Herein, bamboo-derived activated carbon aerogel (BACA) has been successfully prepared through KOH high-temperature activation of cellulose aerogel which was prepared using cellulose extracted from bamboo. Bamboo cellulose aerogel provides sufficient reaction sites for KOH, which is conducive to the formation of a mass of mesoporous structures on the pore walls of the activated carbon aerogel. The optimal BACA adsorbent shows high specific surface area (2503.80 m2/g), and maximum adsorption capability for tetracycline hydrochloride (TCH) reaches 863.8 mg/g at 30 ℃. The removal efficiencies of TCH are 100% and 98.4% at 40 ℃ when the initial concentrations are 500 and 700 mg/L, respectively. Adsorption kinetics and isotherm indicate that the adsorption of BACA for TCH is monolayer adsorption based on chemical adsorption. Spontaneous and endothermic adsorption processes are proved by adsorption thermodynamic studies. Additionally, coexisting ions have insignificant effect on TCH adsorption, and the BACA sample displays excellent adsorption property for five reuse cycles with a removal efficiency of 80.95%, indicating the outstanding adsorption capacity of BACA in practical application. The excellent adsorption performance provides BACA with a promising perspective to remove TCH from wastewater, and the prepared method of BACA can be widely extended to other biomass materials.

Porous activated carbons derived from bamboo pulp black liquor for effective adsorption removal of tetracycline hydrochloride and malachite green from water.

As a kind of wastewater produced by papermaking industry, bamboo pulp black liquor (BPBL) discharged into water causes serious environmental problems. In this work, BPBL was successfully converted into porous carbon after activation with potassium hydroxide (KOH) through one-step carbonization, and adsorption properties of porous carbon derived from bamboo pulp black liquor (BLPC) for tetracycline hydrochloride (TCH) and malachite green (MG) were studied. The adsorption capacities of BLPC for TCH and MG are 1047 and 1277 mg/g, respectively, due to its large specific surface area of 1859.08 m2/g. Kinetics and isotherm data are well fitted to the pseudo-second-order rate model and Langmuir model, respectively. Adsorption experiments and characterizations reveal that the adsorption mechanism involved in TCH and MG adsorption on BLPC mainly depends on the synergistic effect of pore filling, H-bonding, π-π interactions and weak electrostatic interactions. In addition, BLPC shows excellent photothermal properties, and the adsorption capacity of TCH and MG on BLPC can reach 584 and 847 mg/g under the irradiation of near infrared lamp for 50 min, respectively. The synthesized BLPC with high adsorption efficiency, good recovery ability, improved adsorption under near-infrared irradiation can be a promising and effective adsorbent for TCH or MG or other pollutes.