RESUMEN
RATIONALE: We report the N-glycosylation pattern of Sf9 insect cell-derived recombinant spike proteins being developed as candidate vaccine antigens for SARS-CoV-2 (COVID-19) (Sanofi). The method has been optimised to produce peptides with single, isolated glycosylation sites using multiple protease digests. The development and use of glycopeptide libraries from previous developmental phases allowed for faster analysis than processing datasets from individual batches from first principles. METHODS: Purified spike proteins were reduced, alkylated, and digested with proteolytic enzymes. Three different protease digests were utilised to generate peptides with isolated glycosylation sites. The glycopeptides were then analysed using a Waters Q-TOF while using a data-dependent acquisition mass spectrometry experiment. Glycopeptide mapping data processing and glycan classification were performed using Genedata Expressionist via a specialised workflow that used libraries of previously detected glycopeptides to greatly reduce processing time. RESULTS: Two different spike proteins from six manufacturers were analysed. There was a strong similarity at each site across batches and manufacturers. The majority of the glycans present were of the truncated class, although at sites N61, N234, and N717/714 high mannose structures were dominant and at N1173/1170 aglycosylation was dominant for both variant proteins. A comparison was performed on a commercially available spike protein and our results were found to be similar to those of earlier reports. CONCLUSIONS: Our data clearly show that the overall glycosylation pattern of both spike protein variants was highly similar from batch to batch, and between materials produced at different manufacturing facilities. The use of our glycopeptide libraries greatly expedited the generation of site-specific glycan occupancy data for a large glycoprotein. We compared our method with previously obtained data from a commercially available insect cell-derived spike protein and the results were comparable to published findings.
Asunto(s)
COVID-19 , Glicoproteína de la Espiga del Coronavirus , Humanos , COVID-19/prevención & control , COVID-19/virología , Glicopéptidos/química , Péptido Hidrolasas , Péptidos , Polisacáridos/análisis , SARS-CoV-2 , Glicoproteína de la Espiga del Coronavirus/genética , Glicoproteína de la Espiga del Coronavirus/química , Vacunas Sintéticas , Vacunas contra la COVID-19RESUMEN
The multi-attribute method (MAM) was conceived as a single assay to potentially replace multiple single-attribute assays that have long been used in process development and quality control (QC) for protein therapeutics. MAM is rooted in traditional peptide mapping methods; it leverages mass spectrometry (MS) detection for confident identification and quantitation of many types of protein attributes that may be targeted for monitoring. While MAM has been widely explored across the industry, it has yet to gain a strong foothold within QC laboratories as a replacement method for established orthogonal platforms. Members of the MAM consortium recently undertook an interlaboratory study to evaluate the industry-wide status of MAM. Here we present the results of this study as they pertain to the targeted attribute analytics component of MAM, including investigation into the sources of variability between laboratories and comparison of MAM data to orthogonal methods. These results are made available with an eye toward aiding the community in further optimizing the method to enable its more frequent use in the QC environment.
Asunto(s)
Benchmarking , Proteínas , Espectrometría de Masas/métodos , Mapeo Peptídico/métodos , Control de CalidadRESUMEN
The commercially available Polysorbate 80 (PS-80) is a highly heterogeneous product. It is a complex and structurally diverse mixture consisting of polymeric species containing polyoxyethylenes (POEs), fatty acid esters, with/or without a carbohydrate core. The core is primarily sorbitan, with some isosorbide and sorbitol. Depending on the sources of fatty acids and the degrees of esterification, multiple combinations of fatty acid esters are commonly observed. A number of POE intermediates, such as polyoxyethylene glycols, POE-sorbitans, POE-isosorbides, and an array of fatty acid esters from these intermediates remain in the raw material as well. The complex composition of PS-80 is difficult to control and poses a significant characterization challenge for its use in the pharmaceutical industry. Here, we present a novel solution for PS-80 characterization using ultra high-performance liquid chromatography coupled with charge-reduction high resolution mass spectrometry. Post column co-infusion of triethylamine focused the signal into mainly singly charged molecular ions and reduced the extent of in-source fragmentation, resulting in a simpler ion map and enhanced measurement of PS-80 species. The data processing workflow is designed to programmatically identify PS-80 component classes and reduce the burden of manually analyzing complex MS data. The 2-dimensional graphical representation of the data helps visualize these features. Together, these innovative methodologies enabled us to analyze components in PS-80 with unprecedented detail and shall be a useful tool to study formulation and stability of pharmaceutical preparations. The power of this approach was demonstrated by comparing the composition of PS-80 obtained from different vendors.
Asunto(s)
Polietilenglicoles , Polisorbatos , Cromatografía Líquida de Alta Presión/métodos , Espectrometría de Masas , Polietilenglicoles/análisis , Polisorbatos/química , Programas InformáticosRESUMEN
The Multi-Attribute Method (MAM) Consortium was initially formed as a venue to harmonize best practices, share experiences, and generate innovative methodologies to facilitate widespread integration of the MAM platform, which is an emerging ultra-high-performance liquid chromatography-mass spectrometry application. Successful implementation of MAM as a purity-indicating assay requires new peak detection (NPD) of potential process- and/or product-related impurities. The NPD interlaboratory study described herein was carried out by the MAM Consortium to report on the industry-wide performance of NPD using predigested samples of the NISTmAb Reference Material 8671. Results from 28 participating laboratories show that the NPD parameters being utilized across the industry are representative of high-resolution MS performance capabilities. Certain elements of NPD, including common sources of variability in the number of new peaks detected, that are critical to the performance of the purity function of MAM were identified in this study and are reported here as a means to further refine the methodology and accelerate adoption into manufacturer-specific protein therapeutic product life cycles.
RESUMEN
RATIONALE: Modification of cysteines by aminoethylation results in side chains similar to those of lysine. Trypsin cleaves at this modified residue and this labeling method can facilitate the analysis of proteins, specifically antibodies. In this work, the ability to identify peptides containing aminoethylated cysteines is investigated through digestion, covalent labeling, and low-energy ion fragmentation. METHODS: A prototype antibody was reduced, aminoethylated, and digested with either Lys-N or Glu-C. The resulting peptides were amidinated with SMTA and analyzed by PSD in a MALDI-TOF/TOF mass spectrometer or by CID in an ESI ion trap/orbitrap mass spectrometer. RESULTS: PSD and CID fragmentation of peptides with an amidinated aminoethylated cysteine can produce an intense characteristic loss from this modified residue. A neutral loss of 118 Da or charged loss of 119 Da is observed when peptides have low charges. This fragment can form when the cysteine is located in any position in the peptide. The rationalization for this ion is that the amidino group can be initially neutral or protonated and initiates fragmentation. CONCLUSIONS: The combination of a dual-labeling technique and low-energy fragmentation produces an abundant diagnostic ion for the analysis of cysteine-containing peptides. These 118 and 119 Da losses are observed when protons are sequestered.
Asunto(s)
Cisteína/química , Péptidos/química , Digestión , Peso Molecular , Mapeo Peptídico , Espectrometría de Masas en TándemRESUMEN
Aminoethylation of cysteines can provide enzymatically cleavable sites. The ability to obtain peptides containing antibody complementarity determining regions (CDRs) with aminoethylated cysteines was investigated. Because cysteines are often located N-terminal to CDRs, digestion with Lys-N enables acquisition of peptides with CDRs. Lys-N peptides containing an aminoethylated cysteine at the N-terminus were also amidinated. Subsequent collisional activation yields a unique loss of 118 Da that originates from this modified residue, providing a signature ion for cysteine-containing peptides. The relative cleavage efficiencies for Lys-N and trypsin are also compared.
Asunto(s)
Regiones Determinantes de Complementariedad/análisis , Fragmentos de Péptidos/análisis , Rituximab/análisis , Alquilación , Secuencia de Aminoácidos , Cisteína/química , Etilaminas/química , Metaloendopeptidasas/química , Rituximab/química , Análisis de Secuencia de Proteína/métodosRESUMEN
Charge tagging is a peptide derivatization process that commonly localizes a positive charge on the N-terminus. Upon low energy activation (e.g., collision-induced dissociation or post-source decay) of charge tagged peptides, relatively few fragment ions are produced due to the absence of mobile protons. In contrast, high energy fragmentation, such as 157 nm photodissociation, typically leads to a series of a-type ions. Disadvantages of existing charge tags are that they can produce mobile protons or that they are undesirably large and bulky. Here, we investigate a small triethylphosphonium charge tag with two different linkages: amide (158 Da) and amidine bonds (157 Da). Activation of peptides labeled with a triethylphosphonium charge tag through an amide bond can lead to loss of the charge tag and the production of protonated peptides. This enables low intensity fragment ions from both the protonated and charge tagged peptides to be observed. Triethylphosphonium charge tagged peptides linked through an amidine bond are more stable. Post-source decay and photodissociation yield product ions that primarily contain the charge tag. Certain amidine induced fragments are also observed. The previously reported tris(trimethoxyphenyl) phosphonium acetic acid N-hydroxysuccinimidyl ester charge tag shows a similar fragment ion distribution, but the mass of the triethylphosphonium tag label is 415 Da smaller. Graphical Abstract á .
RESUMEN
Six ion fragmentation techniques that can distinguish aspartic acid from its isomer, isoaspartic acid, were compared. MALDI post-source decay (PSD), MALDI 157 nm photodissociation, tris(2,4,6-trimethoxyphenyl)phosphonium bromide (TMPP) charge tagging in PSD and photodissociation, ESI collision-induced dissociation (CID), electron transfer dissociation (ETD), and free-radical initiated peptide sequencing (FRIPS) with CID were applied to peptides containing either aspartic or isoaspartic acid. Diagnostic ions, such as the y-46 and b+H2O, are present in PSD, photodissociation, and charge tagging. câ¢+57 and z-57 ions are observed in ETD and FRIPS experiments. For some molecules, aspartic and isoaspartic acid yield ion fragments with significantly different intensities. ETD and charge tagging appear to be most effective at distinguishing these residues. Graphical Abstract á .
Asunto(s)
Ácido Isoaspártico/análisis , Espectrometría de Masas , Péptidos/análisis , Secuencia de Aminoácidos , IonesRESUMEN
Immonium ions are commonly observed in the high energy fragmentation of peptide ions. In a MALDI-TOF/TOF mass spectrometer, singly charged peptides photofragmented with 157 nm VUV light yield a copious abundance of immonium ions, especially those from aromatic residues. However, their intensities may vary from one peptide to another. In this work, the effect of varying amino acid position, peptide length, and peptide composition on immonium ion yield is investigated. Internal immonium ions are found to have the strongest intensity, whereas immonium ions arising from C-terminal residues are the weakest. Peptide length and competition among residues also strongly influence the immonium ion production. Quantum calculations provide insights about immonium ion structures and the fragment ion conformations that promote or inhibit immonium ion formation.