Rapid identification of early infections in febrile patients after CD19 target CAR-T cell therapy for B-cell malignancies.

BACKGROUND: CD19-targeted chimeric antigen receptor T (CAR-T) cell therapy stands out as a revolutionary intervention, exhibiting remarkable remission rates in patients with refractory/relapsed (R/R) B-cell malignancies. However, the potential side effects of therapy, particularly cytokine release syndrome (CRS) and infections, pose significant challenges due to their overlapping clinical features. Promptly distinguishing between CRS and infection post CD19 target CAR-T cell infusion (CTI) remains a clinical dilemma. Our study aimed to analyze the incidence of infections and identify key indicators for early infection detection in febrile patients within 30 days post-CTI for B-cell malignancies. METHODS: In this retrospective cohort study, a cohort of 104 consecutive patients with R/R B-cell malignancies who underwent CAR-T therapy was reviewed. Clinical data including age, gender, CRS, ICANS, treatment history, infection incidence, and treatment responses were collected. Serum biomarkers procalcitonin (PCT), interleukin-6 (IL-6), and C-reactive protein (CRP) levels were analyzed using chemiluminescent assays. Statistical analyses employed Pearson's Chi-square test, t-test, Mann-Whitney U-test, Kaplan-Meier survival analysis, Cox proportional hazards regression model, Spearman rank correlation, and receiver operating characteristic (ROC) curve analysis to evaluate diagnostic accuracy and develop predictive models through multivariate logistic regression. RESULTS: In this study, 38 patients (36.5%) experienced infections (30 bacterial, 5 fungal, and 3 viral) within the first 30 days of CAR T-cell infusion. In general, bacterial, fungal, and viral infections were detected at a median of 7, 8, and 9 days, respectively, after CAR T-cell infusion. Prior allogeneic hematopoietic cell transplantation (HCT) was an independent risk factor for infection (Hazard Ratio [HR]: 4.432 [1.262-15.565], P = 0.020). Furthermore, CRS was an independent risk factor for both infection ((HR: 2.903 [1.577-5.345], P < 0.001) and severe infection (9.040 [2.256-36.232], P < 0.001). Serum PCT, IL-6, and CRP were valuable in early infection prediction post-CAR-T therapy, particularly PCT with the highest area under the ROC curve (AUC) of 0.897. A diagnostic model incorporating PCT and CRP demonstrated an AUC of 0.903 with sensitivity and specificity above 83%. For severe infections, a model including CRS severity and PCT showed an exceptional AUC of 0.991 with perfect sensitivity and high specificity. Based on the aforementioned analysis, we proposed a workflow for the rapid identification of early infection during CAR-T cell therapy. CONCLUSIONS: CRS and prior allogeneic HCT are independent infection risk factors post-CTI in febrile B-cell malignancy patients. Our identification of novel models using PCT and CRP for predicting infection, and PCT and CRS for predicting severe infection, offers potential to guide therapeutic decisions and enhance the efficacy of CAR-T cell therapy in the future.

Association of Mosaic Chromosomal Alterations and Genetic Factors with the Risk of Cirrhosis.

Background and Aims: Age-related mosaic chromosomal alterations (mCAs) detected from genotyping of blood-derived DNA are structural somatic variants that indicate clonal hematopoiesis. This study aimed to investigate whether mCAs contribute to the risk of cirrhosis and modify the effect of a polygenic risk score (PRS) on cirrhosis risk prediction. Methods: mCA call sets of individuals with European ancestry were obtained from the UK Biobank. The PRS was constructed based on 12 susceptible single-nucleotide polymorphisms for cirrhosis. Cox proportional hazard models were applied to evaluate the associations between mCAs and cirrhosis risk. Results: Among 448,645 individuals with a median follow-up of 12.5 years, we identified 2,681 cases of cirrhosis, 1,775 cases of compensated cirrhosis, and 1,706 cases of decompensated cirrhosis. Compared to non-carriers, individuals with copy-neutral loss of heterozygosity mCAs had a significantly increased risk of cirrhosis (hazard ratio (HR) 1.42, 95% confidence interval (CI) 1.12-1.81). This risk was higher in patients with expanded cell fractions of mCAs (cell fractions ≥10% vs. cell fractions <10%), especially for the risk of decompensated cirrhosis (HR 2.03 [95% CI 1.09-3.78] vs. 1.14 [0.80-1.64]). In comparison to non-carriers of mCAs with low genetic risk, individuals with expanded copy-neutral loss of heterozygosity and high genetic risk showed the highest cirrhosis risk (HR 5.39 [95% CI 2.41-12.07]). Conclusions: The presence of mCAs is associated with increased susceptibility to cirrhosis risk and could be combined with PRS for personalized cirrhosis risk stratification.

Identification and Validation of a Novel Tertiary Lymphoid Structures-Related Prognostic Gene Signature in Hepatocellular Carcinoma.

Background: Hepatocellular carcinoma (HCC) is one of the most common malignant tumors originating from the digestive system. Tertiary lymphoid structures (TLS), non-lymphoid tissues outside of the lymphoid organs, are closely connected to chronic inflammation and tumorigenesis. However, the detailed relationship between TLS and HCC prognosis remained unclear. In this study, we aimed to construct a TLS-related gene signature for predicting the prognosis of HCC patients. Methods: The Cancer Genome Atlas (TCGA) clinical data from 369 HCC tissues and 50 normal liver tissues were utilized to examine the differential expression of TLS-related genes. Based on least absolute shrinkage and selection operator (LASSO) Cox regression analysis, the prognostic model was constructed using the TCGA cohort and validated in the GSE14520 cohort and International Cancer Genome Consortium (ICGC) cohort. The Kaplan-Meier (KM) and receiver operating characteristic (ROC) curves were employed to validate the predictive ability of the prognostic model. Furthermore, Cox regression analysis was applied to identify whether the TLS score could be employed as an independent prognosis factor. A nomogram was developed to predict the survival probability of HCC patients. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were performed for TLS-related genes. Genetic mutation analysis, the CIBERSORT algorithm, and single-sample gene set enrichment analysis (ssGSEA) were used to assess the tumor mutation landscape and immune infiltration. Finally, the role of the TLS score in HCC therapy was investigated. Results: Six genes were included in the construction of our prognostic model (CETP, DNASE1L3, PLAC8, SKAP1, C7, and VNN2), and we validated its accuracy. Survival analysis showed that patients in the high-TLS score group had a significantly better overall survival than those in the low-TLS score group. Univariate, multivariate Cox regression analysis and the establishment of a nomogram indicated that the TLS score could independently function as a potential prognostic marker. A significant association between TLS score and immunity was revealed by an analysis of gene alterations and immune cell infiltration. In addition, two subtypes of the TLS score could accurately predict the effectiveness of sorafenib, transcatheter arterial chemoembolization (TACE), and immunotherapy in HCC patients. Conclusion: In this research, we conducted and validated a prognostic model associated with TLS that may be helpful for predicting clinical outcomes and treatment responsiveness for HCC patients.

Aging properties of polyethylene and polylactic acid microplastics and their adsorption behavior of Cd(II) and Cr(VI) in aquatic environments.

In this study, we examined the aging characteristics of polyethylene (PE) and polylactic acid (PLA) microplastics (MPs), examining the adsorption behaviors and mechanisms concerning Cd(II) and Cr(VI) under both single and binary systems. The results revealed that aging treatment changed the physicochemical properties of MPs. The aging mechanisms of PLA and PE MPs were shown to be similar by the 2D-FTIR-COS study. These mechanisms involve the formation of oxygen-containing functional groups through the combination of carbon chain breakdown and oxygen. Aged MPs had a greater ability to adsorb metal ions than pristine MPs, with PLA MPs outperforming PE MPs. After 30 days of aging, Cd(II) adsorption increased by 40.61 % and 25.49 % for PE and PLA MPs, respectively, while Cr(VI) adsorption increased by 37.50 % and 69.29 %, respectively. The adsorption ability of PE and PLA MPs with Cd(II) or Cr(VI) under binary systems was less than that under single systems, with Cd(II) exhibiting more adsorption competitiveness than Cr(VI). Humic acid (HA), ionic species and strength, solution pH, and adsorption of Cd(II) and Cr(VI) were found to be significantly correlated. Further investigation into the adsorption mechanisms of Cd(II) and Cr(VI) on PE and PLA MPs revealed that pore-filling, electrostatic interactions, complexation, and hydrogen bonding play important roles in the adsorption process. The study's conclusions are crucial for assessing the risk associated with concurrent contamination by metal ions and microplastics.

Advanced photocatalytic disinfection mechanisms and their challenges.

Currently, microbial contamination issues have globally brought out a huge health threat to human beings and animals. To be specific, microorganisms including bacteria and viruses display durable ecological toxicity and various diseases to aquatic organisms. In the past decade, the photocatalytic microorganism inactivation technique has attracted more and more concern owing to its green, low-cost, and sustainable process. A variety kinds of photocatalysts have been employed for killing microorganisms in the natural environment. However, two predominant shortcomings including low activity of photocatalysts and diverse impacts of water characteristics are still displayed in the current photocatalytic disinfection system. So far, various strategies to improve the inherent activity of photocatalysts. Other than the modification of photocatalysts, the optimization of environments of water bodies has been also conducted to enhance microorganisms inactivation. In this mini-review, we outlined the recent progress in photocatalytic sterilization of microorganisms. Meanwhile, the relevant methods of photocatalyst modification and the influences of water body characteristics on disinfection ability were thoroughly elaborated. More importantly, the relationships between strategies for constructing advanced photocatalytic microorganism inactivation systems and improved performance were correlated. Finally, the perspectives on the prospects and challenges of photocatalytic disinfection were presented. We sincerely hope that this critical mini-review can inspire some new concepts and ideas in designing advanced photocatalytic disinfection systems.

Dynamics of the osmotic lysis of mineral protocells and its avoidance at the origins of life.

The osmotic rupture of a cell, its osmotic lysis or cytolysis, is a phenomenon that active biological cell volume regulation mechanisms have evolved in the cell membrane to avoid. How then, at the origin of life, did the first protocells survive prior to such active processes? The pores of alkaline hydrothermal vents in the oceans form natural nanoreactors in which osmosis across a mineral membrane plays a fundamental role. Here, we discuss the dynamics of lysis and its avoidance in an abiotic system without any active mechanisms, reliant upon self-organized behaviour, similar to the first self-organized mineral membranes within which complex chemistry may have begun to evolve into metabolism. We show that such mineral nanoreactors could function as protocells without exploding because their self-organized dynamics have a large regime in parameter space where osmotic lysis does not occur and homeostasis is possible. The beginnings of Darwinian evolution in proto-biochemistry must have involved the survival of protocells that remained within such a safe regime.

Team interaction behaviors correlates with team creativity among nursing students: Canonical correlation and moderation analyses.

BACKGROUND: Prior studies have indicated team members' interaction behaviors may predict creativity among nursing students. METHODS: This study investigated the correlation between interaction behaviors and creativity, both individual- and team-level, among nursing students. In this cross-sectional quantitative study, data were obtained from self-reported questionnaires. Individual creativity was assessed using the Torrance Tests of Creative Thinking scale; the perceived team interaction behavior and team creativity were assessed using validated instruments. Canonical correlation analysis was conducted to determine the overall correlation between interaction behaviors, and creativity, and the moderating effect of female proportion dominance was also examined. RESULTS: A total of 164 nursing students (84.1% female) arranged into 14 teams were included in this study. Canonical correlation analysis showed a positive correlation between interaction behaviors and creativity (correlation = 0.88). All dimensions of interactive behaviors were positively related to creativity dimensions. A stronger correlation to team creativity (correlation = 1) was found compared to individual creativity (correlation = 0.07). This study demonstrated that individual interactive behaviors including spontaneous communication and helping behavior predicted high team creativity. CONCLUSIONS: This insight may be valuable for nursing education programs seeking to foster creativity and effective teamwork. The potential moderating effect of female proportions on team interaction behaviors and creativity should be investigated further.

[Occurrence and Risk Assessment of N-nitrosamines and Their Precursors in Qingjiang River Basin].

N-nitrosamines are a type of nitrogen-containing organic pollutant with high carcinogenicity and mutagenicity. In the main drinking water sources of small and medium-sized towns in China, the contamination levels of N-nitrosamines remain unclear. In addition, there is still lack of research on the concentration of N-nitrosamines and their precursors in tributary rivers. In this study, eight N-nitrosamines and their formation potentials （FPs） were investigated in the Qingjiang River, which is a primary tributary of the Yangtze River. The sewage discharge sites were also monitored, and the environmental influencing factors, carcinogenic and ecological risks caused by N-nitrosamines, and their precursors were evaluated. The results showed that six N-nitrosamines were detected in water samples of the Qingjiang River, among which NDMA [（10 ±15） ng·L-1], NDEA [（9.3 ±9.3） ng·L-1], and NDBA [（14 ±7.8） ng·L-1] were the dominant N-nitrosamines, whereas seven N-nitrosamines were detected in chloraminated water samples, among which NDMA-FP [（46 ±21） ng·L-1], NDEA-FP [（26 ±8.3） ng·L-1], and NDBA-FP [（22 ±13） ng·L-1] were the dominant N-nitrosamine FPs. The concentrations of N-nitrosamines in the middle reaches of the Qingjiang River were higher than those in the upper and lower reaches. Furthermore, the concentrations of N-nitrosamines in the sample sites of sewage discharge and tributaries were significantly higher than those in other sampling sites. The monitoring results at the direct sewage discharge points indicated that the main source of N-nitrosamines in river water was the sewage carrying N-nitrosamines and their precursors. In addition, the concentrations of the three dominant N-nitrosamines including NDMA, NDBA, and NDEA were positively correlated with each other, mainly because of their similar sewage sources. The average carcinogenic risk to residents due to N-nitrosamine in drinking water sources was 2.4×10-5, indicating a potential carcinogenic risk. Moreover, due to the high concentrations of N-nitrosamine formation potentials in the Qingjiang River, the carcinogenic risk of drinking water may be even higher. The ecological risk assessment showed that the ecological risk quotient values of N-nitrosamines in the Qingjiang River watershed were lower than 0.002, which was negligible.

MYB expression by immunohistochemistry is highly specific and sensitive for detection of solid variant of adenoid cystic carcinoma of the breast among all triple-negative breast cancers.

BACKGROUND: Adenoid cystic carcinoma is a rare subtype of triple-negative breast carcinoma. These low-grade tumours, which are treated by simple mastectomy and have an excellent prognosis compared to other triple-negative breast carcinomas. Solid-variant adenoid cystic carcinomas have basaloid features and are difficult to distinguish morphologically from other triple-negative breast cancers. Breast adenoid cystic carcinoma exhibits MYB protein overexpression, which can be detected by immunohistochemistry (IHC). AIM: We compared the IHC expression of MYB in solid-variant adenoid cystic carcinoma with that in other triple-negative breast cancers. METHODS: We conducted IHC staining of 210 samples of triple-negative breast cancers, including solid-variant adenoid cystic carcinoma (n = 17), metaplastic breast carcinoma (n = 44), basaloid triple-negative breast cancer (n = 21), and other triple-negative invasive ductal carcinoma (n = 128). We classified nuclear staining of MYB as diffuse/strong (3+), focal moderate (2+), focal weak (1+), or none (0). RESULTS: All 17 solid/basaloid adenoid cystic carcinoma cases exhibited 3+ MYB expression. Of the 21 solid/basaloid triple-negative breast cancers, one (5%) had 2+ expression, seven (33%) 1+ expression, and 13 (62%) 0 expression. Of the 44 metaplastic carcinoma cases, 39 cases (89%) had no (0) staining, and the other five cases had focal weak (1+) or moderate (2+) staining. Among the 128 triple-negative invasive ductal carcinoma cases, 92 cases (72%) had no (0) staining, 36 cases (28%) exhibited focal weak (1+) or moderate (2+) staining. CONCLUSIONS: Our study revealed diffuse/strong MYB staining (3+) only in solid/basaloid adenoid cystic carcinomas. Thus, we recommend routine MYB IHC staining in triple-negative breast carcinoma with solid/basaloid morphology to improve diagnostic accuracy.

[Genetic analysis of a fetus with Rhizomelic skeletal dysplasia].

OBJECTIVE: To explore the clinical features and genetic basis for a fetus featuring Rhizomelic skeletal dysplasia. METHODS: A fetus diagnosed at the Reproductive and Genetic Center of Suzhou Municipal Hospital in November 2020 was selected as the study subject. Whole exome sequencing (WES) was carried out for the fetus and its parents. Candidate variants were verified by Sanger sequencing. Peripheral blood smears of both parents were also examined. RESULTS: The fetus was found to have a small chest and short limbs, which had suggested skeletal dysplasia. Genetic testing revealed that the fetus has harbored compound heterozygous variants of the LBR gene, including a paternally derived c.1687+1G>A and a maternally derived c.1757G>A (p.Arg586His). The blood smear of the father showed Pelger-Huet anomaly with hyposegmentation of neutrophil nuclei, while the neutrophils of the mother appeared to be normal. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG) and the Association for Molecular Pathology (AMP), the c.1757G>A (p.Arg586His) variant was classified as likely pathogenic (PM3_Strong+PM2_Supporting+PP3), and so was the c.1687+1G>A variant (PVS1-Moderate+PM3+PM2-Supporting+PP4). CONCLUSION: The compound heterozygous variants of the LBR gene probably underlay the pathogenesis of skeletal dysplasia in this fetus.

Strategies and mechanisms for improving the detection accuracy of nonextractable residues of polycyclic aromatic hydrocarbons in soils.

The methods that can accurately measure the concentrations of nonextractable residues (NERs) of hydrophobic organic contaminants (HOCs) in soil are still lacked in current studies. In this study, three methods, namely methanolic saponification treatment (MST), silylation treatment (ST), and acid deashing treatment (ADT), were investigated and then combined to extract the NERs of six types of polycyclic aromatic hydrocarbons (PAHs) from nine soil samples. The NER concentrations of PAHs obtained by ST (2.43-521.73 ng g-1) were comparable to or significantly higher than those obtained by MST (1.94-291.54 ng g-1), owing to the properties of soil and target compounds. Additionally, ADT could further release a considerable amount of PAH NERs (0.39-276.99 ng g-1) from the soils that had been treated with ST. The mechanism was that acid solution dissolved mineral components, significantly increasing the pore size of the soil matrices from 9.37-15.57 nm to 17.11-27.51 nm. The average percentage of each PAH obtained by ADT (the ratio of the amount obtained by ADT to the total NER content) exhibited a negative correlation with their ring numbers (R2 = 0.62, p < 0.05), whereas the percentage of targets recovered through ST increased linearly with their log KOW values (R2 = 0.75, p < 0.05). Moreover, there is a positive correlation (R2 = 0.73, p < 0.05) between the NER percentages of phenanthrene (obtained by ST-ADT) and the specific surface areas of soils, and the NER percentages of benzo(g,h,i)perylene is positively correlated to the content of total organic carbon (R2 = 0.62, p < 0.05). These results suggested that the amounts and locations of NERs were influenced by both the physicochemical characteristics of PAHs and soils. These findings provide some basic understandings of the entrapped mechanisms of PAH NERs, helping to establish strategies for improving their detection accuracy.

Cs3Bi2Br9 nanoparticles decorated C3N4 nanotubes composite photocatalyst for highly selective oxidation of benzylic alcohol.

Solar-light driven oxidation of benzylic alcohols over photocatalysts endows significant prospects in value-added organics evolution owing to its facile, inexpensive and sustainable process. However, the unsatisfactory performance of actual photocatalysts due to the inefficient charge separation, low photoredox potential and sluggish surface reaction impedes the practical application of this process. Herein, we developed an innovative Z-Scheme Cs3BiBr9 nanoparticles@porous C3N4 tubes (CBB-NP@P-tube-CN) heterojunction photocatalyst for highly selective benzyl alcohol oxidation. Such composite combining increased photo-oxidation potential, Z-Scheme charge migration route as well as the structural advantages of porous tubular C3N4 ensures the accelerated mass and ions diffusion kinetics, the fast photoinduced carriers dissociation and sufficient photoredox potentials. The CBB-NP@P-tube-CN photocatalyst demonstrates an exceptional performance for selective photo-oxidation of benzylic alcohol into benzaldehyde with 19, 14 and 3 times higher benzylic alcohols conversion rate than those of C3N4 nanotubes, Cs3Bi2Br9 and Cs3Bi2Br9@bulk C3N4 photocatalysts, respectively. This work offers a sustainable photocatalytic system based on lead-free halide perovskite toward large scale solar-light driven value-added chemicals production.

Adolescent administration of ketamine impairs excitatory synapse formation onto parvalbumin-positive GABAergic interneurons in mouse prefrontal cortex.

Ketamine, an N-methyl-d-aspartate (NMDA) receptor antagonist, induces deficits in cognition and information processing following chronic abuse. Adolescent ketamine misuse represents a significant global public health issue; however, the neurodevelopmental mechanisms underlying this phenomenon remain largely elusive. This study investigated the long-term effects of sub-chronic ketamine (Ket) administration on the medial prefrontal cortex (mPFC) and associated behaviors. In this study, Ket administration during early adolescence displayed a reduced density of excitatory synapses on parvalbumin (PV) neurons persisting into adulthood. However, the synaptic development of excitatory pyramidal neurons was not affected by ketamine administration. Furthermore, the adult Ket group exhibited hyperexcitability and impaired socialization and working memory compared to the saline (Sal) administration group. These results strongly suggest that sub-chronic ketamine administration during adolescence results in functional deficits that persist into adulthood. Bioinformatic analysis indicated that the gene co-expression module1 (M1) decreased expression after ketamine exposure, which is crucial for synapse development in inhibitory neurons during adolescence. Collectively, these findings demonstrate that sub-chronic ketamine administration irreversibly impairs synaptic development, offering insights into potential new therapeutic strategies.

Investigation on pretreatment method for the determination of rare earth elements in polymetallic mineral samples in Pan-Xi region by ICP-MS.

The polymetallic mineral samples in Pan-Xi region are rich in rare earth resources, and exploring an efficient and accurate analysis method is of great significance for their comprehensive utilization. In this study, the samples were decomposed by three methods, namely closed acid dissolution, open acid dissolution with five acid and alkali fusion with sodium peroxide, and the 15 REE were determined by inductively coupled plasma mass spectrometry (ICP-MS) with Rh and Re as internal standard correction elements. The comparative experiments were conducted using standard substances, and the results showed: (1) The detection limit of closed acid dissolution method was low with relative standard deviation (RSD) ranging from 2.51% to 9.56% and the accuracy of method (ΔlgC) ranging from 0.006 to 0.073, while the sample processing was long, and the results of some REE were low. (2) The RSD of open acid dissolution with five acid method ranged from 1.93% to 7.96%, and ΔlgC ranged from 0.004 to 0.045 with low results of the determination results of REE. (3) The alkali fusion with sodium peroxide method eliminated the influence of matrix effects by selecting instrument optimization, sample dilution, appropriate internal standard elements, etc. The RSD ranged from 1.24% to 6.49%, and ΔlgC ranged from 0.001 to 0.032. In conclusion, alkali fusion with sodium peroxide method has a fast analysis process, complete sample dissolution, and the accuracy and precision of test results can meet the requirements of specification (DZ/T0011-2015), which is most suitable for the analysis of REE in polymetallic mineral samples from Pan-Xi region.

Cross-media transfer of polycyclic aromatic hydrocarbons in the Naples metropolitan area, southern Italy.

At present, an in-depth knowledge of polycyclic aromatic hydrocarbons (PAHs) in the multimedia system of the urban environment remains limited. Taking the Naples metropolitan area (NMA) for instance, we simulated the cross-media transfer of PAHs using a multimedia urban model, involving air, water, soil, sediment, vegetation, and impervious film. The results indicated that the predicted PAH values in 2015 match well with their corresponding in-situ monitoring data. The PAH emission inventory and the simulated mass in various media all showed a downward trend from 2015 to 2020 due to national energy conservation policies and Corona Virus Disease 2019. The simulated mass of PAHs in the soil and sediment phases was 896.8 and 232.7 kg in 2020, respectively, contributing together to 96.7% of PAHs in the NMA. And they were identified as the greatest sinks for PAHs, and exhibited the longest retention duration, with values of PAH persistence reaching approximately 548.8 - 2,0642.3 hours. The results of transfer fluxes indicated that local emissions and atmospheric advection were the primary routes affecting the distribution of PAHs. The sensitivity analysis indicated that atmospheric advection rate was the most critical parameter for air, soil, vegetation, and film, whereas water concentration and sediment degradation rate were vital for water and sediment, respectively. This study offered valuable insights into how human activity contributes to the status and fate of PAHs in the urban environment.

Origin of the near-room temperature resistance transition in lutetium with H2/N2 gas mixture under high pressure.

The recent report of room-temperature superconductivity at near-ambient pressure in nitrogen-doped lutetium hydride (Lu-H-N) by Dasenbrock-Gammon et al. [Nature 615, 244-250 (2023)] has attracted tremendous attention due to its anticipated great impact on technology. However, the results could not be independently reproduced by other groups worldwide in follow-up studies, which elicited intense controversy. Here, we develop a reliable experimental protocol to minimize the extensively concerned extrinsic influences on the sample by starting the reaction from pure lutetium loaded with an H2/N2 gas mixture in a diamond anvil cell under different pressures and temperatures and simultaneously monitoring the entire chemical reaction process using in situ four-probe resistance measurements. Therefore, we could repeatedly reproduce the near-room temperature upsurge of electrical resistance at a relatively early stage of the chemical reaction. However, the mechanism is suggested to be a metal-to-semiconductor/insulator transition associated with the structural modulation in the non-stoichiometric Lu-H-N, rather than superconductivity.

Synergistic Construction of Sub-Nanometer Channel Membranes through MOF-Polymer Composites: Strategies and Nanofiltration Applications.

The selective separation of small molecules at the sub-nanometer scale has broad application prospects in the field, such as energy, catalysis, and separation. Conventional polymeric membrane materials (e.g., nanofiltration membranes) for sub-nanometer scale separations face challenges, such as inhomogeneous channel sizes and unstable pore structures. Combining polymers with metal-organic frameworks (MOFs), which possess uniform and intrinsic pore structures, may overcome this limitation. This combination has resulted in three distinct types of membranes: MOF polycrystalline membranes, mixed-matrix membranes (MMMs), and thin-film nanocomposite (TFN) membranes. However, their effectiveness is hindered by the limited regulation of the surface properties and growth of MOFs and their poor interfacial compatibility. The main issues in preparing MOF polycrystalline membranes are the uncontrollable growth of MOFs and the poor adhesion between MOFs and the substrate. Here, polymers could serve as a simple and precise tool for regulating the growth and surface functionalities of MOFs while enhancing their adhesion to the substrate. For MOF mixed-matrix membranes, the primary challenge is the poor interfacial compatibility between polymers and MOFs. Strategies for the mutual modification of MOFs and polymers to enhance their interfacial compatibility are introduced. For TFN membranes, the challenges include the difficulty in controlling the growth of the polymer selective layer and the performance limitations caused by the "trade-off" effect. MOFs can modulate the formation process of the polymer selective layer and establish transport channels within the polymer matrix to overcome the "trade-off" effect limitations. This review focuses on the mechanisms of synergistic construction of polymer-MOF membranes and their structure-nanofiltration performance relationships, which have not been sufficiently addressed in the past.

Defects of Metal Halide Perovskites in Photocatalytic Energy Conversion: Friend or Foe?

Photocatalytic solar-to-fuel conversion over metal halide perovskites (MHPs) has recently attracted much attention, while the roles of defects in MHPs are still under debate. Specifically, the mainstream viewpoint is that the defects are detrimental to photocatalytic performance, while some recent studies show that certain types of defects contribute to photoactivity enhancement. However, a systematic summary of why it is contradictory and how the defects in MHPs affect photocatalytic performance is still lacking. In this review, the innovative roles of defects in MHP photocatalysts are highlighted. First, the origins of defects in MHPs are elaborated, followed by clarifying certain benefits of defects in photocatalysts including optical absorption, charge dynamics, and surface reaction. Afterward, the recent progress on defect-related MHP photocatalysis, i.e., CO2 reduction, H2 generation, pollutant degradation, and organic synthesis is systematically discussed and critically appraised, putting emphasis on their beneficial effects. With defects offering peculiar sets of merits and demerits, the personal opinion on the ongoing challenges is concluded and outlining potentially promising opportunities for engineering defects on MHP photocatalysts. This critical review is anticipated to offer a better understanding of the MHP defects and spur some inspiration for designing efficient MHP photocatalysts.

Lipid-Polymer Nanoparticles Mediate Compartmentalized Delivery of Cas9 and sgRNA for Glioblastoma Vasculature and Immune Reprogramming.

Hypervascularized glioblastoma is naturally sensitive to anti-angiogenesis but suffers from low efficacy of transient vasculature normalization. In this study, a lipid-polymer nanoparticle is synthesized to execute compartmentalized Cas9 and sgRNA delivery for a permanent vasculature editing strategy by knocking out the signal transducer and activator of transcription 3 (STAT3). The phenylboronic acid branched cationic polymer is designed to condense sgRNA electrostatically (inner compartment) and patch Cas9 coordinatively (outer compartment), followed by liposomal hybridization with angiopep-2 decoration for blood-brain barrier (BBB) penetration. The lipid-polymer nanoparticles can reach glioblastoma within 2 h post intravenous administration, and hypoxia in tumor cells triggers charge-elimination and degradation of the cationic polymer for burst release of Cas9 and sgRNA, accompanied by instant Cas9 RNP assembly, yielding ≈50% STAT3 knockout. The downregulation of downstream vascular endothelial growth factor (VEGF) reprograms vasculature normalization to improve immune infiltration, collaborating with interleukin-6 (IL-6) and interleukin-10 (IL-10) reduction to develop anti-glioblastoma responses. Collectively, the combinational assembly for compartmentalized Cas9/sgRNA delivery provides a potential solution in glioblastoma therapy.

High-Safety Lithium-Ion Battery Separator with Adjustable Temperature Function Inspired by the Sugar Gourd Structure.

As the power core of an electric vehicle, the performance of lithium-ion batteries (LIBs) is directly related to the vehicle quality and driving range. However, the charge-discharge performance and cycling performance are affected by the temperature. Excessive temperature can cause internal short circuits and even lead to safety issues, such as thermal runaway. The separator plays a crucial role in protecting the battery from regular operation, preventing direct touch between the cathode and the anode while allowing the transport of lithium ions. In this study, we have designed a thermoregulating separator in the shape of calabash, which uses melamine-encapsulated paraffin phase change material (PCM) with a wide enthalpy (0-168.52 J g-1) to dissipate the heat generated inside the battery promptly. Under extra-long-use conditions, the heat emitted by the battery is absorbed by the PCM without causing a significant temperature rise that triggers thermal runaway. The PCM separator can effectively suppress the temperature increase caused by battery penetration. Due to the unique structure of the PCM, the battery is short-circuited; it can significantly delay the internal temperature rise of the battery and quickly dissipate the heat, which is consistent with the characteristics of natural calabash in nutrient absorption and water diffusion, improving the melting and heat storage efficiency of the PCM. The design of the phase change separator provides an effective reference for overheat protection and improved safety in lithium-ion batteries.