PFAS contaminated asphalt and concrete - Knowledge gaps for future research and management.

Per- and polyfluoroalkyl substances (PFAS) are now widespread in the environment. Globally, airfields and paved firefighting training surfaces are particularly affected due to extensive use of aqueous film forming foams (AFFF). This PFAS contamination in exposed concrete and asphalt has not been widely addressed. This review focusses on PFAS interaction with concrete and asphalt, traversing extraction, analytical identification/quantification, PFAS fractionation via differential adsorption on organic and inorganic substrates, and reuse options for contaminated concrete and asphalt. A total of 24 knowledge gaps and management challenges for concrete and asphalt characterisation and management have been identified.

Engineered mineralogical interfaces as radionuclide repositories.

Effective capture of fugitive actinides and daughter radionuclides constitutes a major remediation challenge at legacy or nuclear accident sites globally. The ability of double-layered, anionic clay minerals known as hydrotalcites (HTC) to contemporaneously sequester a range of contaminants from solution offers a unique remedy. However, HTC do not provide a robust repository for actinide isolation over the long term. In this study, we formed HTC by in-situ precipitation in a barren lixiviant from a uranium mine and thermally transformed the resulting radionuclide-laden, nanoscale HTC. Atomic-scale forensic examination of the amorphized/recrystallised product reveals segregation of U to nanometre-wide mineral interfaces and the local formation of interface-hosted mineral grains. This U-phase is enriched in rare earth elements, a geochemical analogue of actinides such as Np and Pu, and represents a previously unreported radionuclide interfacial segregation. U-rich phases associated with the mineral interfaces record a U concentration factor of ~ 50,000 relative to the original solute demonstrating high extraction and concentration efficiencies. In addition, the co-existing host mineral suite of periclase, spinel-, and olivine-group minerals that equate to a lower mantle, high P-T mineral assemblage have geochemical and geotechnical properties suitable for disposal in a nuclear waste repository. Our results record the efficient sequestering of radionuclides from contaminated water and this novel, broad-spectrum, nanoscale HTC capture and concentration process constitutes a rapid solute decontamination pathway and solids containment option in perpetuity.

Towards effective phosphorus recycling from wastewater: quantity and quality.

Precipitation in the Mg-Ca-NH3-PO4 system has been explored to improve understanding of likely phases recoverable from complex wastewaters. Over a range of Mg/Ca combinations (0-100%) and pH 5-11, at least seven identifiable crystalline phases could be precipitated from artificial wastewater including: struvite, hydroxylapatite, newberyite, brushite, merrilite/whitlockite, octocalcium phosphate, and monetite. This experimental study has outlined the physicochemical conditions required to produce various phosphate products from synthetic wastewater, and found that large differences exist between experimentally formed phases and thermodynamical predictions. Struvite formation is the most desirable precipitate for the recovery of phosphate based upon purity, growth characteristics, dewatering properties, phosphate removal efficiency, and its ability to simultaneously remove ammonia. This study has also demonstrated that in specific cases the preliminary precipitation of brushite is a possible means of decreasing calcium content such that subsequent struvite formation could achieve higher-purity. Utilising experimental results and information on current commodity prices, discussion on the choice of Mg and Ca sources for phosphorus recovery provides guidance on appropriate means to optimise the formation and yield of high quality cost-optimised products.

Treatment of saline, acidic, metal-contaminated groundwater from the Western Australian Wheatbelt.

Managing acidic, metal-containing saline ground and drainage waters in the Wheatbelt of Western Australia is an environmental and economic challenge. Sulfate-reducing fluidised bed bioreactors are shown to be technically capable of treating high salt, low pH, metal containing waters from the town of Narembeen in the Wheatbelt so as to reduce acidity and to remove most of the undesirable metal contaminants. The hydraulic residence time (HRT) limit for a stable process with groundwater from the region of Narembeen was >16 hours. The maximal rate of sulfate reduction in the laboratory system treating Narembeen groundwater was similar to rates observed in comparable applications of the process at other sites, ca. 3 g sulfate (L-reactor)(-1) day(-1). Salts that are relatively free of metal contaminants can be produced from water that has been treated by the sulfate-reducing fluidised bed bioreactor. It is unlikely that metal precipitates, captured from Wheatbelt waters by the process, would be of economic value. If sulfate-reducing fluidised bed reactors were considered technologically appropriate at larger scale, the decision to use them would be based on the necessity to take action, the comparative effectiveness of competing technologies, and the relative costs of competing technologies.