The Incorporated Drug Affects the Properties of Hydrophilic Nanofibers.

Hydrophilic nanofibers offer promising potential for the delivery of drugs with diverse characteristics. Yet, the effects of different drugs incorporated into these nanofibers on their properties remain poorly understood. In this study, we systematically explored how model drugs, namely ibuprofen, carvedilol, paracetamol, and metformin (hydrochloride), affect hydrophilic nanofibers composed of polyethylene oxide and poloxamer 188 in a 1:1 weight ratio. Our findings reveal that the drug affects the conductivity and viscosity of the polymer solution for electrospinning, leading to distinct changes in the morphology of electrospun products. Specifically, drugs with low solubility in ethanol, the chosen solvent for polymer solution preparation, led to the formation of continuous nanofibers with uniform diameters. Additionally, the lower solubility of metformin in ethanol resulted in particle appearance on the nanofiber surface. Furthermore, the incorporation of more hydrophilic drugs increased the surface hydrophilicity of nanofiber mats. However, variations in the physicochemical properties of the drugs did not affect the drug loading and drug entrapment efficiency. Our research also shows that drug properties do not notably affect the immediate release of drugs from nanofibers, highlighting the dominant role of the hydrophilic polymers used. This study emphasizes the importance of considering specific drug properties, such as solubility, hydrophilicity, and compatibility with the solvent used for electrospinning, when designing hydrophilic nanofibers for drug delivery. Such considerations are crucial for optimizing the properties of the drug delivery system, which is essential for achieving therapeutic efficacy and safety.

Influence of Polymer Concentration on Drying of SPION Dispersions by Electrospinning.

To improve the physical stability of nanoparticle dispersions, several methods for their transformation into stable and easily dispersible dry products have been investigated thus far. Recently, electrospinning was shown to be a novel nanoparticle dispersion drying method, which addresses the crucial challenges of the current drying methods. It is a relatively simple method, but it is affected by various ambient, process, and dispersion parameters, which impact the properties of the electrospun product. The aim of this study was, thus, to investigate the influence of the most important dispersion parameter, namely the total polymer concentration, on the drying method efficiency and the properties of the electrospun product. The formulation was based on a mixture of hydrophilic polymers poloxamer 188 and polyethylene oxide in the weight ratio of 1:1, which is acceptable for potential parenteral application. We showed that the total polymer concentration of prior-drying samples is closely related to their viscosity and conductivity, also affecting the morphology of the electrospun product. However, the change in morphology of the electrospun product does not affect the efficiency of SPION reconstitution from the electrospun product. Regardless of the morphology, the electrospun product is not in powder form and is therefore safer to handle compared to powder nanoformulations. The optimal total polymer concentration in the prior-drying SPION dispersion, which enables the formation of an easily dispersible electrospun product with high SPION-loading (65% (w/w)) and fibrillar morphology, was shown to be 4.2% (w/v).

Electrospinning as a method for preparation of redispersible dry product with high content of magnetic nanoparticles.

One of the key technological challenges in the development of iron-oxide-based magnetic nanoparticles (MNPs) is their long-term physical stability in colloidal dispersions. This can be improved by their transformation into a dry form. Here, we introduce electrospinning as a drying method for ethanol-based and water-based MNP dispersions, which enables the preparation of high-loaded dry MNP products. The obtained easily dispersible electrospun product contained up to 50 % (w/w) of MNPs, homogeneously distributed in the fibrillar structure, which is much more compared to the products of currently available methods for drying MNP dispersions. The polymers used as building blocks of nanofibers, namely poloxamer 188 and polyethylene oxide, improved the tolerance of MNPs to high ionic strength dispersion medium and thus enhanced the short-term physical stability of MNP dispersions after reconstitution. The dry product was stable for up to 1 month at room temperature and relative humidity up to 70 %. It was in the form of a nanofiber mat, which prevented the aerosolization of MNPs and their unintentional ambient exposure. Therefore, the electrospun product with MNPs is expected to be a safer dry formulation of MNPs than the nanoparticulate powders, which are usually the final products of the conventional drying methods.

Bioevaluation methods for iron-oxide-based magnetic nanoparticles.

Despite the intensive development and unique properties of iron-oxide-based magnetic nanoparticles (MNPs), their use as drug delivery systems has not yet entered clinical practice. There also remains a lack of data on their toxicity profile and behavior in the bioenvironment. A number of in-vitro studies have been performed, but these were carried out with various MNPs using various methods of bioevaluation and various cell lines, so they are not universally applicable. It is of vital importance that selection of any experimental set-up and parameters for MNP bioevaluation, as well as the cell lines used, are focused on the final application of the MNPs. In this review, the most commonly used in-vitro methods for bioevaluation of MNPs are presented, including their key advantages and shortcomings. This critical comparison of these methods should facilitate selection of the appropriate in-vitro bioevaluation methods, and define the already established protocols that are available in the literature. Thus, we present here the first comprehensive review of in-vitro bioevaluation methods currently available for MNP evaluation. Furthermore, we provide important guidelines for selection of the best method, to enable reliable comparisons of the biological properties of different MNPs, and hence to promote their efficient translation from research to clinical practice.

One-Pot Method for Preparation of Magnetic Multi-Core Nanocarriers for Drug Delivery.

The development of various magnetically-responsive nanostructures is of great importance in biomedicine. The controlled assembly of many small superparamagnetic nanocrystals into large multi-core clusters is needed for effective magnetic drug delivery. Here, we present a novel one-pot method for the preparation of multi-core clusters for drug delivery (i.e., magnetic nanocarriers). The method is based on hot homogenization of a hydrophobic phase containing a nonpolar surfactant into an aqueous phase, using ultrasonication. The solvent-free hydrophobic phase that contained tetradecan-1-ol, γ-Fe2O3 nanocrystals, orlistat, and surfactant was dispersed into a warm aqueous surfactant solution, with the formation of small droplets. Then, a pre-cooled aqueous phase was added for rapid cooling and the formation of solid magnetic nanocarriers. Two different nonpolar surfactants, polyethylene glycol dodecyl ether (B4) and our own N¹,N¹-dimethyl-N²-(tricosan-12-yl)ethane-1,2-diamine (SP11), were investigated for the preparation of MC-B4 and MC-SP11 magnetic nanocarriers, respectively. The nanocarriers formed were of spherical shape, with mean hydrodynamic sizes <160 nm, good colloidal stability, and high drug loading (7.65 wt.%). The MC-B4 nanocarriers showed prolonged drug release, while no drug release was seen for the MC-SP11 nanocarriers over the same time frame. Thus, the selection of a nonpolar surfactant for preparation of magnetic nanocarriers is crucial to enable drug release from nanocarrier.