Sensitive Detection and Quantification of Oxygenated Compounds in Complex Samples Using GC-Combustion-MS.

This work introduces a new element-selective gas chromatography detector for the accurate quantification of traces of volatile oxygen-containing compounds in complex samples without the need for specific standards. The key to this approach is the use of oxygen highly enriched in 18O as the oxidizing gas in a combustion unit (800 °C) that allows us to directly and unambiguously detect the natural oxygen present in the GC-separated compounds through its incorporation into the volatile species formed after their combustion and their subsequent degradation to 16O in the ion source. The unspecific signal due to the low 16O abundance in the oxidizing gas could be compensated by measuring the m/z 12 that comes as well from the CO2 degradation. Equimolarity was proved with several O-containing compounds with different sizes and functionalities. A detection limit of 28 pg of injected O was achieved, which is the lowest ever reported for any GC detector, which barely worsened to 55 and 214 pg of O when the oxygenate partially or completely coeluted with a very abundant matrix compound. Validation was attained by the analysis of a SRM to obtain accurate (99-103%) and precise (1-4% RSD) results. Robustness was tested after spiking a hydrotreated diesel with 10 O-compounds at the ppm level, which could be discriminated from the matrix crowd and quantified (mean recovery of 102 ± 9%) with a single generic standard. Finally, it was also successfully applied to easily spot and quantify the 33 oxygenates naturally present in a complex wood bio-oil sample.

Potential of GC-Combustion-MS as a Powerful and Versatile Nitrogen-Selective Detector in Gas Chromatography.

Here, we show the potential and applicability of the novel GC-combustion-MS approach as a nitrogen-selective GC detector. Operating requirements to achieve reproducible and compound-independent formation of volatile NO species as a selective N-signal during the combustion step are described. Specifically, high temperatures (≥1000 °C) and post-column O2 flows (0.4 mL min-1 of 0.3% O2 in He) turned out to be necessary when using a vertical oven without makeup flow (prototype #1). In contrast, the use of a horizontal oven with 1.7 mL min-1 He as an additional makeup flow (prototype #2) required milder conditions (850 °C and 0.2 mL min-1). A detection limit of 0.02 pg of N injected was achieved, which is by far the lowest ever reported for any GC detector. Equimolarity, linearity, and peak shape were also adequate. Validation of the approach was performed by the analysis of a certified reference material obtaining accurate (2% error) and precise (2% RSD) results. Robustness was tested with the analysis of two complex samples with different matrices (diesel and biomass pyrolysis oil) and N concentration levels. Total N determined after the integration of the whole chromatograms (524 ± 22 and 11,140 ± 330 µg N g-1, respectively) was in good agreement with the reference values (497 ± 10 and 11,000 ± 1200 µg N g-1, respectively). In contrast, GC-NCD results were lower for the diesel sample (394 ± 42 µg N g-1). Quantitative values for the individual and families of N species identified in the real samples by parallel GC-MS and additional GC × GC-MS analyses were also obtained using a single generic internal standard.

Quantitative multiplexed elemental (C, H, N and S) detection in complex mixtures using gas chromatography.

We present a novel and single detection approach that enables sensitive, accurate and compound-independent quantification of N, S and H in the individual compounds present in complex samples. Integration of the whole chromatographic profile gives the total content of the elements. Simultaneous universal detection is also achieved using the C profile.

GC-ICP-MS/MS Instrumental Setup for Total and Speciation Sulfur Analysis in Gasolines using Generic Standards.

Quantitative characterization of sulfur-containing petroleum derivatives is mainly limited by the large number of potential targets present and the matrix effects suffered due to the high-carbon-containing matrices. Herein we describe the instrumental modifications required in a commercial GC-ICP-MS/MS instrument, and their corresponding optimization, for turning it into a compound-independent quantitative technique for both total and speciation sulfur analysis in gasolines. Additionally, carbon-derived matrix effects were made negligible for direct and fast total S analysis, making the use of relatively complex isotope-dilution strategies not necessary anymore. An absolute detection limit of 0.3 pg of S was achieved, which is, to the best of our knowledge, more than 1 order of magnitude below the ones reported for other sulfur GC selective detectors. The precision was below 3% RSD. Total analysis was performed by flow-injection analysis through a transfer line and external calibration, whereas speciation analysis was carried out by chromatographic separation and internal standardization. In both cases, simple generic standards were used, which enabled us to get rid of specific S-containing standards, which were sometimes not available or unstable. The proposed method was successfully applied to total and speciation sulfur analysis of a commercial gasoline sample and validated with a certified-reference-material (ERM-EF213) gasoline. The approach has proved to be simple, fast, robust, and convenient for implementation in routine laboratories, as demonstrated by the successive analyses of 50 gasoline samples in 3 h without any instrumental drift.