In-vitro comparison of hydroxyapatite coatings obtained by cold spray and conventional thermal spray technologies.

Hydroxyapatite (HA) coatings onto Ti6Al4V alloy substrates were obtained by several thermal spray technologies: atmospheric plasma spray (APS) and high velocity oxy fuel (HVOF), together with the cold spray (CS) technique. A characterization study has been performed by means of surface and microstructure analyses, as well as biological performance. In-vitro tests were performed with primary human osteoblasts at 1, 7 and 14 days of cell culture on substrates. Cell viability was tested by MTS and LIVE/DEAD assays, cell differentiation by alkaline phosphatase (ALP) quantification, and cell morphology was analyzed by scanning electron microscopy. The HA coatings showed an increase of HA crystallinity from 62,4% to 89%, but also an increase of hydrophilicity from ∼32° to 0°, with the decrease of the operating temperature of the thermal spray techniques (APS > HVOF > CS). Additionally, APS HA coatings showed more surface micro-features than HVOF and CS HA coatings; cells onto APS HA coatings showed faster attachment by acquiring osteoblastic morphology in comparison with the rounded cell morphology observed onto CS HA coatings at 1 day of cell culture. HVOF HA coatings also showed proper cell adherence but did not show extended filopodia as cells onto APS HA coatings. However, at 14 days of cell culture, higher cell proliferation and differentiation was detected on HA coatings with higher crystallinity (HVOF and CS techniques). Cell attachment is suggested to be favoured by surface micro-features but also moderate surface wettability whereas cell proliferation and differentiation is suggested to be highly influenced by HA crystallinity and crystal size.

Inflammation status in HIV-positive individuals correlates with changes in bone tissue quality after initiation of ART.

BACKGROUND: The mechanisms behind ART-induced bone changes in HIV-infected patients are poorly known. We aimed to analyse changes in inflammatory and bone markers in HIV after tenofovir disoproxil fumarate initiation, and the associations with changes in the bone strength parameters. METHODS: HIV-positive participants starting tenofovir disoproxil fumarate-based ART underwent dual-energy X-ray absorptiometry (QDR 4500 SL®, Hologic, Waltham, MA, USA) for bone mineral density (BMD), a microindentation test (OsteoProbe®, Active Life Scientific, Santa Barbara, CA, USA) for bone quality [bone material strength index (BMSi)] and phlebotomy at baseline and 48 weeks after ART. A panel of inflammatory biomarkers and bone turnover markers were measured by ELISA. HIV-negative controls underwent identical procedures once. Values are expressed as medians and IQRs, and non-parametric tests were used to perform the analysis. RESULTS: Twenty HIV-infected individuals and 20 HIV-negative control individuals were matched in terms of age and gender. HIV individuals showed higher levels of inflammatory markers. We found no differences in bone turnover markers. HIV-positive individuals presented lower BMSi values at baseline compared with controls [86 (83-90) versus 89 (88-93), respectively; P = 0.034]. We found no difference in BMD (at either of the sites evaluated). BMSi tended to increase with treatment. IL-1ß at baseline was positively correlated with changes in BMSi after ART (rho = 0.564, P = 0.014). Baseline levels of sclerostin tended to be negatively correlated with changes in BMSi (rho = -0.402, P = 0.097). We found a negative correlation between time since HIV diagnosis and changes in BMSi (rho = -0.466, P = 0.04). CONCLUSIONS: We observed a correlation between changes in bone quality and the inflammatory environment in HIV-positive individuals. Moreover, among the underlying mechanisms we highlight the Wnt pathway as having a potentially significant role in ART bone quality recovery.

In-vitro study of hierarchical structures: Anodic oxidation and alkaline treatments onto highly rough titanium cold gas spray coatings for biomedical applications.

Hierarchical structures were obtained applying two different nanotexturing surface treatments onto highly rough commercial pure titanium coatings by cold spray: (i) anodic oxidation and (ii) alkaline treatments. An extended surface characterization in terms of topography, composition, and wettability has been performed to understand how those parameters affect to cell response. Primary human osteoblasts extracted from knee were seeded onto the as-sprayed titanium surface before and after the nanotexturing treatments. Cell viability was tested by using MTS and LIVE/DEAD assays, as well as osteoblasts differentiation by alkaline phosphatase (ALP) quantification at 3 and 10 days of cell culture. The combination of micro-/nano-roughness results in a significantly increase of cell proliferation, as well as cell differentiation after 10 days of cell culture in comparison with the non-treated coatings.

Functionalized coatings by cold spray: An in vitro study of micro- and nanocrystalline hydroxyapatite compared to porous titanium.

Three different surface treatments on a Ti6Al4V alloy have been in vitro tested for possible application in cementless joint prosthesis. All of them involve the novelty of using the Cold Spray technology for their deposition: (i) an as-sprayed highly rough titanium and, followed by the deposition of a thin hydroxyapatite layer with (ii) microcrystalline or (iii) nanocrystalline structure. Primary human osteoblasts were extracted from knee and seeded onto the three different surfaces. Cell viability was tested by MTS and LIVE/DEAD assays, cell differentiation by alkaline phosphatase (ALP) quantification and cell morphology by Phalloidin staining. All tests were carried out at 1, 7 and 14 days of cell culture. Different cell morphologies between titanium and hydroxyapatite surfaces were exhibited. At 1 day of cell culture, cells on the titanium coating were spread and flattened, expanding the filopodia actin filaments in all directions, while cells on the hydroxyapatite coatings showed round like-shape morphology due to slower attachment. Higher cell viability was detected at all times of cell culture on titanium coating due to a better attachment at 1 day. However, from 7 days of cell culture, cells on hydroxyapatite showed good attachment onto surfaces and highly increased their proliferation, mostly on nanocrystalline, achieving similar cell viability levels than titanium coatings. ALP levels were significantly higher in titanium, in part, because of greatest cell number. Overall, the best cell functional results were obtained on titanium coatings whereas microcrystalline hydroxyapatite presented the worst cellular parameters. However, results indicate that nanocrystalline hydroxyapatite coatings may achieve promising results for the faster cell proliferation once cells are attached on the surface.

Osteoblastic cell response on high-rough titanium coatings by cold spray.

Highly rough and porous commercially pure titanium coatings have been directly produced for first time by the cold spray technology, which is a promising technology in front of the vacuum plasma spray for oxygen sensitive materials. The wettability properties as well as the biocompatibility evaluation have been compared to a simply sand blasted Ti6Al4V alloy substrate. Surface topographies were analysed using confocal microscopy. Next, osteoblast morphology (Phalloidin staining), proliferation (MTS assay), and differentiation (alkaline phosphatase activity) were examined along 1, 7 and 14 days of cell culture on the different surfaces. Finally, mineralization by alizarin red staining was quantified at 28 days of cell culture. The contact angle values showed an increased hydrophilic behaviour on the as-sprayed surface with a good correlation to the biological response. A higher cell viability, proliferation and differentiation were obtained for highly rough commercial pure titanium coatings in comparison with sand blasted substrates. Cell morphology was similar in all coatings tested; at 14 days both samples showed extended filopodia. A higher amount of calcium-rich deposits was detected on highly rough surfaces. In summary, in-vitro results showed an increase of biological properties when surface roughness increases.

Discrepancy between bone density and bone material strength index in three siblings with Camurati-Engelmann disease.

Camurati-Engelmann (CE) is a very rare disease affecting one in every million persons worldwide. It is characterized by an enlargement of long bones. We aimed to assess bone characteristics in three siblings with different tools. Even if there was an excess of bone density, quality seemed to be deteriorated. INTRODUCTION: CE disease is a rare monogenic disorder affecting approximately one in every million persons worldwide. It is mainly characterized by a progressive hyperostosis of the periosteum and endosteum of the diaphysis of long bones. Limited data are available about bone characteristics in these patients. In three siblings with CE disease, we aimed to assess bone mineral density (BMD) and trabecular bone score (TBS) by dual-energy X-ray absorptiometry (DXA) and material characteristics at tissue level using bone impact reference point indentation. METHODS: Clinical data were collected and a general laboratory workup was performed. At the lumbar spine and hip, BMD and TBS were measured using DXA imaging. Bone material strength index (BMSi) was measured by bone impact microindentation using an Osteoprobe instrument. RESULTS: All three cases had densitometric values consistent with high bone mass (sum of Z-score at the lumbar spine and hip > 4). Hip BMD was extremely high in all three siblings at both total hip and femoral neck, while at the lumbar spine, two of them had normal values but the third again had very high BMD. TBS values were in the normal range. In contrast, BMSi measurements were at low or very low levels, compared with normal controls. CONCLUSION: Despite strikingly increased BMD and normal microarchitecture, BMSi is affected in patients with CE. Microindentation could be an appropriate tool for assessing bone fragility in these patients. Bone disease in this group of patients requires further study to better understand the underlying regulatory mechanisms and their alterations.

Real-Time Protein and Cell Binding Measurements on Hydroxyapatite Coatings.

Although a lot of in vitro and in vivo assays have been performed during the last few decades years for hydroxyapatite bioactive coatings, there is a lack of exploitation of real-time in vitro interaction measurements. In the present work, real-time interactions for a plasma sprayed hydroxyapatite coating were measured by a Multi-Parametric Surface Plasmon Resonance (MP-SPR), and the results were compared with standard traditional cell viability in vitro assays. MP-SPR is proven to be suitable not only for measurement of molecule-molecule interactions but also molecule-material interaction measurements and cell interaction. Although SPR is extensively utilized in interaction studies, recent research of protein or cell adsorption on hydroxyapatite coatings for prostheses applications was not found. The as-sprayed hydroxyapatite coating resulted in 62.4% of crystalline phase and an average thickness of 24 ± 6 µm. The MP-SPR was used to measure lysozyme protein and human mesenchymal stem cells interaction to the hydroxyapatite coating. A comparison between the standard gold sensor and Hydroxyapatite (HA)-plasma coated sensor denoted a clearly favourable cell attachment on HA coated sensor as a significantly higher signal of cell binding was detected. Moreover, traditional cell viability and proliferation tests showed increased activity with culture time indicating that cells were proliferating on HA coating. Cells show homogeneous distribution and proliferation along the HA surface between one and seven days with no significant mortality. Cells were flattened and spread on rough surfaces from the first day, with increasing cytoplasmatic extensions during the culture time.

CYP11A1 expression in bone is associated with aromatase inhibitor-related bone loss.

Aromatase inhibitors (AIs) used as adjuvant therapy in postmenopausal women with hormone receptor-positive breast cancer cause diverse musculoskeletal side effects that include bone loss and its associated fracture. About half of the 391 patients treated with AIs in the Barcelona-Aromatase induced bone loss in early breast cancer cohort suffered a significant bone loss at lumbar spine (LS) and/or femoral neck (FN) after 2 years on AI-treatment. In contrast, up to one-third (19.6% LS, 38.6% FN) showed no decline or even increased bone density. The present study aimed to determine the genetic basis for this variability. SNPs in candidate genes involved in vitamin D and estrogen hormone-response pathways (CYP11A1, CYP17A1, HSD3B2, HSD17B3, CYP19A1, CYP2C19, CYP2C9, ESR1, DHCR7, GC, CYP2R1, CYP27B1, VDR and CYP24A1) were genotyped for association analysis with AI-related bone loss (AIBL). After multiple testing correction, 3 tag-SNPs (rs4077581, s11632698 and rs900798) located in the CYP11A1 gene were significantly associated (P<0.005) with FN AIBL at 2 years of treatment. Next, CYP11A1 expression in human fresh bone tissue and primary osteoblasts was demonstrated by RT-PCR. Both common isoforms of human cholesterol side-chain cleavage enzyme (encoded by CYP11A1 gene) were detected in osteoblasts by western blot. In conclusion, the genetic association of CYP11A1 gene with AIBL and its expression in bone tissue reveals a potential local function of this enzyme in bone metabolism regulation, offering a new vision of the steroidogenic ability of this tissue and new understanding of AI-induced bone loss.

In vitro performance of ceramic coatings obtained by high velocity oxy-fuel spray.

Hydroxyapatite coatings obtained by plasma-spraying have been used for many years to improve biological performance of bone implants, but several studies have drawn attention to the problems arising from high temperatures and the lack of mechanical properties. In this study, plasma-spraying is substituted by high velocity oxy-fuel (HVOF) spray, with lower temperatures reached, and TiO2 is added in low amounts to hydroxyapatite in order to improve the mechanical properties. Four conditions have been tested to evaluate which are those with better biological properties. Viability and proliferation tests, as well as differentiation assays and morphology observation, are performed with human osteoblast cultures onto the studied coatings. The hydroxyapatite-TiO2 coatings maintain good cell viability and proliferation, especially the cases with higher amorphous phase amount and specific surface, and promote excellent differentiation, with a higher ALP amount for these cases than for polystyrene controls. Observation by SEM corroborates this excellent behaviour. In conclusion, these coatings are a good alternative to those used industrially, and an interesting issue would be improving biological behaviour of the worst cases, which in turn show the better mechanical properties.

Enhancing the bioactivity of polymeric implants by means of cold gas spray coatings.

Nanostructured anatase coatings were built-up on biocompatible polyetheretherketone (PEEK) by means of cold gas spray (CGS). Titanium layer was previously desposited, which acted as bond coat between PEEK and metal oxide. Semicrystalline polymer was not degraded during the spraying process and starting composition of titanium dioxide was not affected. TiO2 was homogeneously obtained onto CGS Ti layer and completely covered the piece. Primary human osteoblasts were seeded onto biomaterials and in vitro cell experiments provided evidence to confirm that nanostructured anatase coatings deposited by cold gas spray improve the performance of PEEK implants.

Cell-free cartilage engineering approach using hyaluronic acid-polycaprolactone scaffolds: a study in vivo.

Polycaprolactone scaffolds modified with cross-linked hyaluronic acid were prepared in order to establish whether a more hydrophilic and biomimetic microenvironment benefits the progenitor cells arriving from bone marrow in a cell-free tissue-engineering approach. The polycaprolactone and polycaprolactone/hyaluronic acid scaffolds were characterized in terms of morphology and water absorption capacity. The polycaprolactone and polycaprolactone/hyaluronic acid samples were implanted in a chondral defect in rabbits; bleeding of the subchondral bone was provoked to generate a spontaneous healing response. Repair at 1, 4, 12, and 24 weeks was assessed macroscopically using the International Cartilage Repair Society score and the Oswestry Arthroscopy Score and microscopically using immunohistological staining for collagen type I and type II, and for Ki-67. The presence of hyaluronic acid improves scaffold performance, which supports a good repair response without biomaterial pre-seeding.

Polymorphisms and haplotypes across the osteoprotegerin gene associated with bone mineral density and osteoporotic fractures.

UNLABELLED: Osteoprotegerin plays a key role in bone remodelling. We studied the association between 24 polymorphisms and haplotypes on the OPG gene and bone mineral density and fractures. After multiple-testing correction, one SNP and two block-haplotypes were significantly associated with FN BMD. Two other block-haplotypes were associated with fracture. INTRODUCTION AND HYPOTHESIS: Osteoprotegerin (OPG) plays a key role in bone remodelling. Here we studied the association between polymorphisms and haplotypes on the OPG gene and bone mineral density (BMD) and fractures. METHODS: Twenty-four single nucleotide polymorphisms (SNPs) were selected to cover six haplotypic blocks and were genotyped in 964 postmenopausal Spanish women. Haplotypes were established with HaploStats. Association was analysed by GLM (for BMD) and logistic regression (for fractures) both at single SNP and haplotype levels. RESULTS: Upon adjustment for multiple testing (p < 0.0073), one of the SNPs (SNP #17, rs1032129) remained significantly associated with FN BMD (p = 0.001). Four block-haplotypes stood multiple-testing correction. Two remained associated with FN BMD and two with fracture. The association of block-4 haplotype "AC" (of SNPs #18 and #17) with FN BMD (p = 0.0002) was stronger than that of SNP#17 alone and was the best result overall. A global assessment of the results indicated that all the alleles and haplotypes with a protective effect, at p < 0.05, belonged to a frequent long-range haplotype. CONCLUSIONS: In conclusion, these results provide a detailed picture of the involvement of common variants and haplotypes of the OPG gene in bone phenotypes.

A porous PCL scaffold promotes the human chondrocytes redifferentiation and hyaline-specific extracellular matrix protein synthesis.

The redifferentiation, proliferation, and hyaline-specific extracellular matrix (ECM) protein synthesis of chondrocytes cultured in a polycaprolactone (PCL) scaffold were analyzed. Gene expression of the type II collagen and aggrecan was assessed by real-time PCR in cells from PCL scaffolds, monolayer, and pellet cultures. The proliferative activity was assessed using Ki-67 immunodetection, and the chondrocytic differentiation was evaluated using S-100 immunodetection. The synthesis and deposition into scaffold pores of type II collagen and glycosaminoglycan were analyzed by immunohistochemistry and Alcian blue staining, respectively. All parameters were assessed throughout 28 days of cultures maintained in either fetal bovine serum-containing medium (FCM) or Insulin-Transferrin-Selenium-containing medium (ICM). Expression of the type II collagen gene was lower in FCM cultures than in ICM cultures for all culture systems (p < 0.05). Moreover, PCL scaffolds cultured in ICM were able to induce collagen gene expression more efficiently than pellet and monolayer cultures. Aggrecan gene expression did not vary significantly between mediums and three-dimensional system cultures, but in ICM cultures, the monolayer cultures had significantly higher levels of aggrecan gene expression than did either the PCL or pellet cultures. Chondrocytes cultured in PCL scaffolds or pellets with FCM did not proliferate to a great extent but did maintain their differentiated phenotype for 28 days. Levels of cartilage ECM protein synthesis and deposition into the scaffold pores were similar among PCL and pellet cultures grown in FCM and in ICM. In conclusion, chondrocytes seeded into PCL scaffolds, cultured in ICM, efficiently maintained their differentiated phenotype and were able to synthesize cartilage-specific ECM proteins.

Biochemical basis of the effect of chondroitin sulphate on osteoarthritis articular tissues.

Osteoarthritis is a chronic disease characterised by irreversible damage to joint structures, including loss of articular cartilage, osteophyte formation, alterations in the subchondral bone and synovial inflammation. Pain, functional disability and impairment of health-related quality of life are major complaints in patients with osteoarthritis. Several compounds have been investigated for their positive effects on the relief of clinical symptoms and improvement of structural changes in osteoarthritis. It has been shown that chondroitin sulphate interferes with the progression of structural changes in joint tissues and is used in the management of patients with osteoarthritis. This review summarises data from relevant reports describing the mechanisms of action of chondroitin sulphate involved in the beneficial effects of the drug.

Biodegradable PCL scaffolds with an interconnected spherical pore network for tissue engineering.

A technique for producing controlled interconnected porous structures for application as a tissue engineering scaffold is presented in this article. The technique is based on the fabrication of a template of interconnected poly(ethyl methacrylate) (PEMA) microspheres, the introduction of a biodegradable polymer, poly-epsilon-caprolactone (PCL), and the elimination of the template by a selective solvent. A series of PCL scaffolds with a porosity of 70% and pore sizes up to 200 microm were produced and characterized (both thermally and mechanically). Human chondrocytes were cultured in monolayer on bulk PCL disks or seeded into porous PCL scaffolds. Cell adhesion, viability, proliferation, and proteoglycan (PG) synthesis were tested and compared with monolayer cultures on tissue-treated polystyrene or pellet cultures as reference controls. Cells cultured on PCL disks showed an adhesion similar to that of the polystyrene control (which allowed high levels of proliferation). Stained scaffold sections showed round-shaped chondrocyte aggregates embedded into porous PCL. PG production was similar to that of the pellet cultures and higher than that obtained with monolayer postconfluence cultures. This shows that the cells are capable of attaching themselves to PCL. Furthermore, in porous PCL, cells maintain the same phenotype as the chondrocytes within the native cartilage. These results suggest that PCL scaffolds may be a suitable candidate for chondrocyte culture.

COL1A1, ESR1, VDR and TGFB1 polymorphisms and haplotypes in relation to BMD in Spanish postmenopausal women.

INTRODUCTION AND HYPOTHESIS: Genetic studies of osteoporosis have focused on analysing single polymorphisms in individual genes - with inconclusive results. An alternative approach may involve haplotypes and gene-gene interactions. The aim of the study was to test the association between the COL1A1, ESR1, VDR and TGFB1 polymorphisms or haplotypes and bone mineral density (BMD) in Spanish postmenopausal women. METHODS: Sixteen polymorphisms were analysed in 719 postmenopausal women. ANOVA, ANCOVA and Xi2 tests were used to perform the statistical analysis. RESULTS: COL1A1 -1997G > T (p=0.04) and TGFB1 Leu10Pro (p=0.02) were found to be associated with adjusted lumbar spine (LS) BMD. Interactions were observed between: the COL1A1 -1997 G/T and Sp1 polymorphisms (p < 0.01 for LS BMD) and the COL1A1 -1663 indelT and VDR ApaI polymorphisms (p < 0.01 for femoral neck (FN) BMD). The COL1A1 GDs and ESR1 LPX haplotypes were associated with FN BMD (p=0.03 and p=0.03). CONCLUSIONS: Polymorphisms at COL1A1 and TGFB1 and haplotypes at COL1A1 and ESR1 were found to be associated with BMD in a cohort of postmenopausal Spanish women. Moreover, COL1A1 polymorphisms showed significant interactions among them and with the VDR 3' polymorphisms.

[Hyperhomocystinemia and 677C T methylenetetrahydrofolate reductase polymorphism as a cardiovascular risk factor in childhood]. / Hiperhomocistinemia y polimorfismo 677C T de la 5,10-metilenotetrahidrofolato reductasa en hijos de pacientes con enfermedad coronaria prematura.

BACKGROUND: Factors related to hyperhomocystinemia in the pediatric population of our geographical area with a parental history of premature coronary disease (PCD) are not well known. OBJECTIVES: To evaluate the possible association between plasma total homocysteine (tHcy), the B vitamins involved in its metabolism (folate, vitamin B12 and B6), and 677C T polymorphism of methylenetetrahydrofolate reductase (MTHFR) in a group of children with a parental history of PCD. METHODS: A cross-sectional analytical study of 80 children (aged 5-18 years old) with a parental history of PCD was performed. Values found in these children were compared with reference values for similar age groups. Plasma tHcy and vitamin B6 were evaluated by high-performance liquid chromatography with fluorometric detection. Folate and vitamin B12 concentrations were determined by radioimmunoassay. Detection of 677C T polymorphism of MTHFR was performed using polymerase chain reaction amplification and Hinfl digestion. Statistical analysis was performed using the SPSS program, version 10.0. Concentrations of tHcy and vitamins were compared using the Mann-Whitney U-test and Spearman's correlation coefficient. The association between phenotype, hyperhomocystinemia and low vitamin concentrations was analyzed using the chi-squared test. ResultsPlasma tHcy values in the children aged more than 10 years with a parental history of PCD were significantly higher (p < 0.001) than the reference values. Vitamin B12 levels were significantly lower (p 0.015), but neither folate nor vitamin B6 levels differed from the reference values. A negative correlation (p < 0.0001) was observed between tHcy and folate (r 0.47) and between tHcy and vitamin B12 levels (r 0.51). Eighty percent of the children with the TT genotype of MTHFR showed hyperhomocystinemia. Suboptimal vitamin B levels were also associated with the TT genotype of MTHFR. CONCLUSIONS: Hyperhomocystinemia detected in children with a parental history of PCD is associated with the TT genotype of MTHFR and with low folate levels. Because hyperhomocystinemia can be corrected by vitamin B supplementation, tHcy determination is recommended in the offspring of patients with PCD.

Homocysteine and the MTHFR 677C-->T allele in premature coronary artery disease. Case control and family studies.

BACKGROUND: The aim of this work was to evaluate the role of homocysteine, and the MTHFR 677C-->T allele as risk factors for premature coronary artery disease and to analyse the inheritance of this metabolic disorder. MATERIAL AND METHODS: Case-control and family studies were performed in a sample of 76 male patients (age < 55), 95 age-matched controls and 89 patients' offspring. Plasma total homocysteine concentrations, its nutritional determinants and the frequency of the MTHFR 677C-->T allele were measured, in addition to conventional risk factors. RESULTS: Mild hyperhomocysteinemia (above the 90th percentile of the control group) was seen in 22.4% of patients (P = 0.02) and was an independent predictor of premature coronary artery disease (odds ratio of 3.2). The frequencies of the 677T allele in patients and controls were 0.37 and 0.36 and those of the TT genotype were 0.15 and 0.14, respectively. Homozygosity for the 677T allele was associated with significantly higher homocysteine values (P < 0.00001). Among TT patients, 64% had mild hyperhomocysteinemia, as compared to 23% of TT controls. Mild hyperhomocysteinemia showed a strong hereditary component, as 36% of patients' offspring had homocysteine levels above the age-adjusted 90th percentile compared to only 13% of patients' spouses. Among children with the TT genotype, the proportion raised to 83% (P < 0.001). CONCLUSION: In this Spanish population, mild hyperhomocysteinemia is associated with the risk of premature coronary artery disease and is highly prevalent in offspring of patients with this condition. The MTHFR TT genotype is associated with hyperhomocysteinemia, but not with coronary artery disease.

Mutation 1091delC is highly prevalent in Spanish Sanfilippo syndrome type A patients.

The gene resposible for Sanfilippo syndrome type A, a lysosomal disorder caused by deficiency of sulfamidase, was recently cloned and more than 40 mutations were identified. This paper presents the mutation analysis and clinical findings in 11 Spanish patients in whom 19 of the 22 mutant alleles have been identified. This is the first report on mutations in Spanish Sanfilippo A patients. Seven different mutations were found, four of which (Q85R, R206P, A354P, and L386R) were not previously described. Mutation 1091delC was the most prevalent, accounting for nearly one-half of the mutated alleles, while mutations R245H and R74C were not found. Haplotype analysis suggests a founder effect as the cause of the high frequency of 1091delC in this population.