Scattering Elimination in 2D IR Immune from Detector Artifacts.

Highly scattering samples, such as polymer droplets or solid-state powders, are difficult to study via coherent two-dimensional infrared (2D IR) spectroscopy. Previously, researchers have employed (quasi-) phase cycling, local-oscillator chopping, and polarization control to reduce scattering, but the latter method poses a limit on polarization-dependent measurements. Here, we present a method for Scattering Elimination Immune from Detector Artifacts (SEIFDA) in pump-probe 2D IR experiments. Our method extends the negative probe delay method of removing scattering from pump-probe spectroscopy to 2D experiments. SEIFDA works well for all polarizations when combined with the optimized noise reduction scheme to remove additive and multiplicative noise. We demonstrate that our method can be employed with any polarization scheme and reliably lowers the scattering at parallel polarization to comparable levels to the conventional 8-frame phase cycling with probe chopping (8FPCPC) at perpendicular polarization. Our system can acquire artifact free spectra in parallel polarization when the signal intensity is as little as 5% of the intensity of the interference between the pump pulses scattered into the detector. It reduces the time required to characterize the scattering term by at least 50% over 8FPCPC. Through detailed analysis of detector nonlinearity, we show that the performance of 8FPCPC can be improved by incorporating nonlinear correction factors, but it is still worse than that of SEIFDA. Application of SEIFDA to study the encapsulation of Nile red in polymer droplets demonstrates that this method will be very useful for probing highly scattering systems.

Photobase-Triggered Formation of 3D Epitaxially Fused Quantum Dot Superlattices with High Uniformity and Low Bulk Defect Densities.

Highly ordered epitaxially fused colloidal quantum dot (QD) superlattices (epi-SLs) promise to combine the size-tunable photophysics of QDs with the efficient charge transport of bulk semiconductors. However, current epi-SL fabrication methods are crude and result in structurally and chemically inhomogeneous samples with high concentrations of extended defects that localize carriers and prevent the emergence of electronic mini-bands. Needed fabrication improvements are hampered by inadequate understanding of the ligand chemistry that causes epi-SL conversion from the unfused parent SL. Here we show that epi-SL formation by the conventional method of amine injection into an ethylene glycol subphase under a floating QD film occurs by deprotonation of glycol by the amine and subsequent exchange of oleate by glycoxide on the QD surface. By replacing the amine with hydroxide ion, we demonstrate that any Brønsted-Lowry base that creates a sufficient dose of glycoxide can produce the epi-SL. We then introduce an epi-SL fabrication method that replaces point injection of a base with contactless and uniform illumination of a dissolved photobase. Quantitative mapping of multilayer (3D) films shows that our photobase-made epi-SLs are chemically and structurally uniform and have much lower concentrations of bulk defects compared to the highly inhomogeneous and defect-rich epi-SLs produced by amine point injection. The structural-chemical uniformity and structural perfection of photobase-made epi-SLs make them leading candidates for achieving emergent mini-band charge transport in a self-assembled mesoscale solid.

Directional, Low-Energy Driven Thermal Actuating Bilayer Enabled by Coordinated Submolecular Switching.

The authors reveal a thermal actuating bilayer that undergoes reversible deformation in response to low-energy thermal stimuli, for example, a few degrees of temperature increase. It is made of an aligned carbon nanotube (CNT) sheet covalently connected to a polymer layer in which dibenzocycloocta-1,5-diene (DBCOD) actuating units are oriented parallel to CNTs. Upon exposure to low-energy thermal stimulation, coordinated submolecular-level conformational changes of DBCODs result in macroscopic thermal contraction. This unique thermal contraction offers distinct advantages. It's inherently fast, repeatable, low-energy driven, and medium independent. The covalent interface and reversible nature of the conformational change bestow this bilayer with excellent repeatability, up to at least 70 000 cycles. Unlike conventional CNT bilayer systems, this system can achieve high precision actuation readily and can be scaled down to nanoscale. A new platform made of poly(vinylidene fluoride) (PVDF) in tandem with the bilayer can harvest low-grade thermal energy and convert it into electricity. The platform produces 86 times greater energy than PVDF alone upon exposure to 6 °C thermal fluctuations above room temperature. This platform provides a pathway to low-grade thermal energy harvesting. It also enables low-energy driven thermal artificial robotics, ultrasensitive thermal sensors, and remote controlled near infrared (NIR) driven actuators.

Phase-Sensitive Vibrationally Resonant Sum-Frequency Generation Microscopy in Multiplex Configuration at 80 MHz Repetition Rate.

Vibrationally resonant sum-frequency generation (VR SFG) microscopy is an advanced imaging technique that can map out the intensity contrast of infrared and Raman active vibrational modes with micron to submicron lateral resolution. To broaden its applications and to obtain a molecular level of understanding, further technical advancement is needed to enable high-speed measurements of VR SFG microspectra at every pixel. In this study, we demonstrate a new VR SFG hyperspectral imaging platform combined with an ultrafast laser system operated at a repetition rate of 80 MHz. The multiplex configuration with broadband mid-infrared pulses makes it possible to measure a single microspectrum of CH/CH2 stretching modes in biological samples, such as starch granules and type I collagen tissue, with an exposure time of hundreds of milliseconds. Switching from the homodyne- to heterodyne-detected VR SFG hyperspectral imaging can be achieved by inserting a pair of optics into the beam path for local oscillator generation and delay time adjustment, which enables self-phase-stabilized spectral interferometry. We investigate the relationship between phase images of several different C-H modes and the relative orientation of collagen triple-helix in fibril bundles. The results show that the new multiplex VR SFG microscope operated at a high repetition rate is a powerful approach to probe the structural features and spatial arrangements of biological systems in detail.

Ultrafast vibrational dynamics of the tyrosine ring mode and its application to enkephalin insertion into phospholipid membranes as probed by two-dimensional infrared spectroscopy.

Enkephalins are small opioid peptides whose binding conformations are catalyzed by phospholipid membranes. Binding to opioid receptors is determined by the orientation of tyrosine and phenylalanine side chains. In this work, we investigate the effects of different charged phospholipid headgroups on the insertion of the tyrosine side chain into a lipid bilayer using a combination of 2D IR spectroscopy, anharmonic DFT calculations, and third order response function modeling. The insertion is probed by using the ∼1515 cm-1 tyrosine ring breathing mode, which we found exhibits rich vibrational dynamics on the picosecond timescale. These dynamics include rapid intramolecular vibrational energy redistribution (IVR), where some of the energy ends up in a dark state that shows up as an anharmonically shifted combination band. The waiting-time dependent 2D IR spectra also show an unusual line shape distortion that affects the extraction of the frequency-frequency correlation function (FFCF), which is the dynamic observable of interest that reflects the tyrosine side chain's insertion into the lipid bilayer. We proposed three models to account for this distortion: a hot-state exchange model, a local environment dependent IVR model, and a coherence transfer model. A qualitative analysis of these models suggests that the local environment dependent IVR rate best explains the line shape distortion, while the coherence transfer model best reproduced the effects on the FFCF. Even with these complex dynamics, we found that the tyrosine ring mode's FFCF is qualitatively correlated with the degree of insertion expected from the different phospholipid headgroups.

Vibrational Spectroscopic Map, Vibrational Spectroscopy, and Intermolecular Interaction.

Vibrational spectroscopy is an essential tool in chemical analyses, biological assays, and studies of functional materials. Over the past decade, various coherent nonlinear vibrational spectroscopic techniques have been developed and enabled researchers to study time-correlations of the fluctuating frequencies that are directly related to solute-solvent dynamics, dynamical changes in molecular conformations and local electrostatic environments, chemical and biochemical reactions, protein structural dynamics and functions, characteristic processes of functional materials, and so on. In order to gain incisive and quantitative information on the local electrostatic environment, molecular conformation, protein structure and interprotein contacts, ligand binding kinetics, and electric and optical properties of functional materials, a variety of vibrational probes have been developed and site-specifically incorporated into molecular, biological, and material systems for time-resolved vibrational spectroscopic investigation. However, still, an all-encompassing theory that describes the vibrational solvatochromism, electrochromism, and dynamic fluctuation of vibrational frequencies has not been completely established mainly due to the intrinsic complexity of intermolecular interactions in condensed phases. In particular, the amount of data obtained from the linear and nonlinear vibrational spectroscopic experiments has been rapidly increasing, but the lack of a quantitative method to interpret these measurements has been one major obstacle in broadening the applications of these methods. Among various theoretical models, one of the most successful approaches is a semiempirical model generally referred to as the vibrational spectroscopic map that is based on a rigorous theory of intermolecular interactions. Recently, genetic algorithm, neural network, and machine learning approaches have been applied to the development of vibrational solvatochromism theory. In this review, we provide comprehensive descriptions of the theoretical foundation and various examples showing its extraordinary successes in the interpretations of experimental observations. In addition, a brief introduction to a newly created repository Web site (http://frequencymap.org) for vibrational spectroscopic maps is presented. We anticipate that a combination of the vibrational frequency map approach and state-of-the-art multidimensional vibrational spectroscopy will be one of the most fruitful ways to study the structure and dynamics of chemical, biological, and functional molecular systems in the future.

Optimized noise reduction scheme for heterodyne spectroscopy using array detectors.

In this work, we optimize and further advance a noise reduction scheme for heterodyne spectroscopy. This scheme linearly combines data from reference detectors to predict the noise statistics in the signal detector through an optimized coefficient matrix. We validate this scheme for visible white-light-continuum and 800-nm light sources using un-matched CMOS arrays and show that the signal-to-noise ratio can approach the noise floor of the signal detector while using only ~5% of the energy for reference detection. We also optimize the strategy for estimating the coefficient matrix in practical applications. When combined with elaborate algorithms to perform pixel data compression and expansion, our scheme is applicable in difficult situations, including when the sample position is rapidly scanned, when detectors exhibit nonlinear response, and/or when laser fluctuations are large. The scheme is generalized to scenarios with complex chopping or phase cycling patterns, and a simple approach is provided for the chopping case. Finally, a robust and computationally efficient method is devised to remove multiplicative noise.

General noise suppression scheme with reference detection in heterodyne nonlinear spectroscopy.

We devised a novel two-step reference scheme that can greatly suppress the additive and convolutional noises in heterodyne nonlinear spectroscopy. To optimally remove additive noise, we fully utilized the spectral correlation in multi-channel reference data through a linear combination and regression algorithm. Using our pump-probe 2D IR spectrometer, we demonstrated that our scheme can improve the signal-to-noise ratio by 10-30 times and reach the noise floor of the signal detector. The new algorithm is guaranteed to reduce noise, enables the use of unmatched reference detectors, and does not introduce baseline shift or signal distortion. This scheme is applicable to many heterodyne spectroscopic techniques.

Structure of Penta-Alanine Investigated by Two-Dimensional Infrared Spectroscopy and Molecular Dynamics Simulation.

We have studied the structure of (Ala)5, a model unfolded peptide, using a combination of 2D IR spectroscopy and molecular dynamics (MD) simulation. Two different isotopomers, each bis-labeled with (13)C═O and (13)C═(18)O, were strategically designed to shift individual site frequencies and uncouple neighboring amide-I' modes. 2D IR spectra taken under the double-crossed ⟨π/4, -π/4, Y, Z⟩ polarization show that the labeled four-oscillator systems can be approximated by three two-oscillator systems. By utilizing the different polarization dependence of diagonal and cross peaks, we extracted the coupling constants and angles between three pairs of amide-I' transition dipoles through spectral fitting. These parameters were related to the peptide backbone dihedral angles through DFT calculated maps. The derived dihedral angles are all located in the polyproline-II (ppII) region of the Ramachandran plot. These results were compared to the conformations sampled by Hamiltonian replica-exchange MD simulations with three different CHARMM force fields. The C36 force field predicted that ppII is the dominant conformation, consistent with the experimental findings, whereas C22/CMAP predicted similar population for α+, ß, and ppII, and the polarizable Drude-2013 predicted dominating ß structure. Spectral simulation based on MD representative conformations and structure ensembles demonstrated the need to include multiple 2D spectral features, especially the cross-peak intensity ratio and shape, in structure determination. Using 2D reference spectra defined by the C36 structure ensemble, the best spectral simulation is achieved with nearly 100% ppII population, although the agreement with the experimental cross-peak intensity ratio is still insufficient. The dependence of population determination on the choice of reference structures/spectra and the current limitations on theoretical modeling relating peptide structures to spectral parameters are discussed. Compared with the previous results on alanine based oligopeptides, the dihedral angles of our fitted structure, and the most populated ppII structure from the C36 simulation are in good agreement with those suggesting a major ppII population. Our results provide further support for the importance of ppII conformation in the ensemble of unfolded peptides.

Polarization-sensitive sum-frequency generation microscopy of collagen fibers.

Point-scanning sum-frequency generation (SFG) microscopy enables the generation of images of collagen I fibers in tissues by tuning into specific vibrational resonances of the polypeptide. It is shown that when collagen-rich tissues are visualized near the 2954 cm(-1) stretching vibration of methylene groups, the SFG image contrast is higher compared to the contrast seen in nonresonant second-harmonic generation (SHG) imaging. Polarization and spectrally resolved analysis of the SFG signal as a function of fiber orientation in the CH-stretching range of the vibrational spectrum enabled a comparative characterization of the achiral tensor elements of collagen's second-order susceptibility. This analysis reveals that selected on-resonance tensor elements are enhanced over other elements, giving rise to a much stronger anisotropy ρ of the signal for SFG (ρ ≈ 15) compared to SHG (ρ ≈ 3). The improved anisotropy of the vibrationally resonant signal contributes to the higher contrast seen in the SFG tissue images.

Mapping molecular orientation with phase sensitive vibrationally resonant sum-frequency generation microscopy.

We demonstrate a phase sensitive, vibrationally resonant sum-frequency generation (PSVR-SFG) microscope that combines high resolution, fast image acquisition speed, chemical selectivity, and phase sensitivity. Using the PSVR-SFG microscope, we generate amplitude and phase images of the second-order susceptibility of collagen I fibers in rat tail tendon tissue on resonance with the methylene vibrations of the protein. We find that the phase of the second-order susceptibility shows dependence on the effective polarity of the fibril bundles, revealing fibrous collagen domains of opposite orientations within the tissue. The presence of collagen microdomains in tendon tissue may have implications for the interpretation of the mechanical properties of the tissue.

Picosecond rotational interconversion adjacent to a C═O bond studied by two-dimensional infrared spectroscopy.

Molecular conformations around the C═O group of carbonyl compounds like ketones and aldehydes play an important role in determining their reaction properties in solutions, including reaction rate, mechanism, steric structure, and chirality of products. Investigating different rotational conformers and their rapid exchange at room temperature will provide information on the rotational barrier and insights into how different rotamers may contribute to fundamental reactions in chemistry. We applied two-dimensional infrared (2D IR) spectroscopy and polarization-dependent IR transient grating technique to the study of 4,4-dimethyl-2-pentanone in CCl(4). Spectroscopic evidence showed that the internal rotation around the single carbon-carbon bond adjacent to the C═O group takes place on a picosecond time scale. DFT calculations suggested the presence of three different rotational conformations, one eclipsed and two staggered forms. Spectral simulation utilized the stochastic Liouville equation with a three-state jump model and incorporated the polarization factors that take into account the different direction of transition dipole moment in the three rotamers. The effects of the intramolecular vibrational energy redistribution process on the waiting time dependence of the 2D absorptive spectra were also included. Through comprehensive simulation of the observed spectral features, the exchange time constants between the three rotamers were determined: 5.4 ps from the eclipsed to staggered forms and 1.7 ps for the reverse direction.

Rapid vibrational imaging with sum frequency generation microscopy.

We demonstrate rapid vibrational imaging based on sum frequency generation (SFG) microscopy with a collinear excitation geometry. Using the tunable picosecond pulses from a high-repetition-rate optical parametric oscillator, vibrationally selective imaging of collagen fibers is achieved with submicrometer lateral resolution. We furthermore show simultaneous SFG and second harmonic generation imaging to emphasize the compatibility of the microscope with other nonlinear optical modalities.

Stapling of a 3(10)-helix with click chemistry.

Short peptides are important as lead compounds and molecular probes in drug discovery and chemical biology, but their well-known drawbacks, such as high conformational flexibility, protease lability, poor bioavailability and short half-lives in vivo, have prevented their potential from being fully realized. Side chain-to-side chain cyclization, e.g., by ring-closing olefin metathesis, known as stapling, is one approach to increase the biological activity of short peptides that has shown promise when applied to 3(10)- and α-helical peptides. However, atomic resolution structural information on the effect of side chain-to-side chain cyclization in 3(10)-helical peptides is scarce, and reported data suggest that there is significant potential for improvement of existing methodologies. Here, we report a novel stapling methodology for 3(10)-helical peptides using the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction in a model aminoisobutyric acid (Aib) rich peptide and examine the structural effect of side chain-to-side chain cyclization by NMR, X-ray diffraction, linear IR and femtosecond 2D IR spectroscopy. Our data show that the resulting cyclic peptide represents a more ideal 3(10)-helix than its acyclic precursor and other stapled 3(10)-helical peptides reported to date. Side chain-to-side chain stapling by CuAAC should prove useful when applied to 3(10)-helical peptides and protein segments of interest in biomedicine.

Linear and two-dimensional infrared spectroscopic study of the amide I and II modes in fully extended peptide chains.

We have carried out structural determination of capped C(α,α)-diethylglycine (Deg) homopeptides with different chain lengths, Ac-(Deg)(n)-OtBu (n = 2-5), solvated in CDCl(3), and investigated vibrational properties of the amide I and II modes by linear and 2D IR spectroscopy, ONIOM calculations, and molecular dynamics simulations. 2D IR experiments were performed in the amide I region using the rephasing pulse sequence under the double-crossed polarization and the nonrephasing sequence under a new polarization configuration to measure cross-peak patterns in the off-diagonal regions. The 2D IR spectra measured in the amide I and II regions reveal complex couplings between these modes. Model spectral calculations finely reproduced the measured spectral profiles by using vibrational parameters that were very close to the values predicted by the ONIOM method. The agreement led to a conclusion that peptide backbones are fully extended with the dihedral angles (ϕ,ψ) ≈ (±180°,±180°) and that a sequence of intramolecular C(5) hydrogen bonds forms along the entire chain regardless of the chain length. This conclusion was endorsed by analysis of the molecular dynamics trajectories for n = 3 and 5 that showed an exclusive population of the C(5) conformation. The conformationally well-restrained Deg homopeptides serve as an ideal linear exciton chain, which is scarcely obtainable by protein amino acids. We investigated excitonic properties of the linear chain through analytic modeling and compared the measurement and calculation results of the amide I and II modes. The integrated intensity of the amide II band is larger than that of the amide I for the C(5) structure, untypical behavior in contrast with other secondary structures. This comprehensive study characterized the amide I and II spectral signatures of the fully extended conformation, which will facilitate the conformational analysis of artificial oligopeptides that contain such structural motifs.

Comparative study of electrostatic models for the amide-I and -II modes: linear and two-dimensional infrared spectra.

We have carried out a comparative study of five ab initio electrostatic frequency maps and a semiempirical model for the amide-I and -II modes. Unrestrained molecular dynamics simulation of a 3(10)-helical peptide, Z-Aib-L-Leu-(Aib)(2)-Gly-OtBu, in CDCl(3) is performed using the AMBER ff99SB force field, and the linear and two-dimensional infrared (2D IR) spectra are simulated on the basis of a vibrational exciton Hamiltonian model. A new electrostatic potential-based amide-I and -II frequency map for N-methylacetamide is developed in this study. This map and other maps developed by different research groups are applied to calculate the local mode frequencies of the amide linkages in the hexapeptide. The simulated amide-I line shape from all models agrees well with the previous experimental results on the same system, except for an overall frequency shift. In contrast, the simulated amide-II bands are more sensitive to the frequency maps. Essential features obtained in the electrostatic models are captured by the semiempirical model that takes into account only the intramolecular hydrogen bonding effects and solvent shifts. Detailed comparisons between the models are also drawn through analysis of the local mode frequency shifts. Among all of the maps tested in this study, the new four-site potential map performs quite well in simulating the amide-II bands. It properly predicts the effects of hydrogen bonding on the amide-I and -II frequencies and reasonably simulates the isotope-dependent amide-I/II cross peaks upon (13)C=(18)O/(15)N substitutions.

Interactions of tyrosine in Leu-enkephalin at a membrane-water interface: an ultrafast two-dimensional infrared study combined with density functional calculations and molecular dynamics simulations.

The interactions of neuropeptides and membranes play an important role in peptide hormone function. Our current understanding of peptide-membrane interactions remains limited due to the paucity of experimental techniques capable of probing such interactions. In this work, we study the nature of opioid peptide-membrane interactions using ultrafast two-dimensional infrared (2D IR) spectroscopy. The high temporal resolution of 2D IR is particularly suited for studying highly flexible opioid peptides. We investigate the location of the tyrosine (Tyr) side chain of leucine-enkephalin (Lenk) in lipid bilayer membranes by measuring spectral diffusion of the phenolic ring vibrational mode in three different systems: Lenk in lipid bilayer membranes (bicelles), Lenk in deuterated water, and p-cresol in deuterated water. Frequency-frequency correlation functions obtained from waiting-time-dependent 2D IR spectra reveal an ultrafast decaying component with an approximately 1 ps time constant that is common for all three systems. On the basis of density functional theory calculations and molecular dynamics simulations, this spectral diffusion component is attributed to hydrogen-bond dynamics of the phenolic hydroxyl group interacting with bulk water. Unlike p-cresol in water, both Lenk systems exhibit static spectral inhomogeneity, which can be attributed to conformational distributions of Lenk that do not interconvert within 4 ps. Our results suggest that the Tyr side chain of Lenk in bicelles is located at the water-abundant region at the membrane-water interface and not embedded into the hydrophobic core.

Toward detecting the formation of a single helical turn by 2D IR cross peaks between the amide-I and -II modes.

We have combined two-dimensional infrared (2D IR) spectroscopy and isotope substitutions to reveal the vibrational couplings between a pair of amide-I and -II modes that are several residues away but directly connected through a hydrogen bond in a helical peptide. This strategy is demonstrated on a 3(10)-helical hexapeptide, Z-Aib-L-Leu-(Aib)2-Gly-Aib-OtBu, and its 13C=18O-Leu monolabeled and 13C=18O-Leu/15N-Gly bis-labeled isotopomers in CDCl3. The isotope-dependent amide-I/II cross peaks clearly show that the second and fourth peptide linkages are vibrationally coupled as they are in proximity, forming a 3(10)-helical turn. The experimental spectra are compared to simulations based on a vibrational exciton Hamiltonian model that fully takes into account the amide-I and -II modes. The amide-II local mode frequency is evaluated by a new model based on the effects of hydrogen-bond geometry and sites. Ab initio nearest-neighbor coupling maps of the amide-I/I, -I/II, -II/I and -II/II modes are generated by isotopically isolating the local modes of N-acetyl-glycine N'-methylamide (AcGlyNHMe). Longer range couplings are modeled by transition charge interactions. The effects of the capping groups are incorporated and isotope effects are analyzed based on ab initio calculations of six model compounds. The main features of the 2D IR spectra are reproduced by this modeling. The conformational sensitivity of the isotope-dependent amide-I/II cross peaks is discussed in comparison with the calculated spectra for a semiextended structure. Our experimental and theoretical study demonstrates that the combination of 2D IR and 13C=18O/15N labeling is a useful structural method for detecting helical turn formation with residue-level specificity.