RESUMEN
Background: Lipedema is the progressive symmetrical deposition of subcutaneous fat and fluid in the lower body, ordinarily sparing the trunk, upper limbs, face, and neck. It may follow an autosomal dominant inheritance pattern. The gold standard treatment for lipedema is complete decongestive therapy, consisting of manual lymphatic drainage and compression garments. This scoping review assessed the existing literature on the effectiveness of liposuction as an alternative treatment for lipedema. Methods: A scoping review of electronically available literature within PubMed, Scopus, and Cochrane focused on liposuction as a treatment for lipedema considering the following inclusion criteria: human studies, case series of 10 or more, controlled trials, randomized controlled trials, patient-reported outcome measurement studies, survey analyses, descriptive studies, retrospective analyses, recurrence included, follow-up of 6 months or more, age 18 years or older, and treatment modality being liposuction. Results: Thirteen studies were selected. Nine studies reported decreased compression therapy use among patients following liposuction. No studies reported a long-term increase in compression therapy following liposuction. Studies found self-reported improvements in pain, mobility, bruising, and overall quality of life for patients following liposuction, many of whom had previously been on compressive therapy. Studies reported low rates of serious adverse events following liposuction, including deep vein thrombosis, pulmonary embolism, and infection. Conclusions: These results suggest that liposuction can be a viable treatment alternative to compression therapy for lipedema in patients whose compression therapy has not been helpful. However, there is not enough evidence to say whether liposuction is as effective as compression for patients first presenting with lipedema.
RESUMEN
OBJECTIVES: This study investigated a novel strategy for improving regenerative cartilage outcomes. It combines fractional laser treatment with the implantation of neocartilage generated from autologous dynamic Self-Regenerating Cartilage (dSRC). METHODS: dSRC was generated in vitro from harvested autologous swine chondrocytes. Culture was performed for 2, 4, 8, 10, and 12 weeks to study matrix maturation. Matrix formation and implant integration were also studied in vitro in swine cartilage discs using dSRC or cultured chondrocytes injected into CO2 laser-ablated or mechanically punched holes. Cartilage discs were cultured for up to 8 weeks, harvested, and evaluated histologically and immunohistochemically. RESULTS: The dSRC matrix was injectable by week 2, and matrices grew larger and more solid with time, generating a contiguous neocartilage matrix by week 8. Hypercellular density in dSRC at week 2 decreased over time and approached that of native cartilage by week 8. All dSRC groups exhibited high glycosaminoglycan (GAG) production, and immunohistochemical staining confirmed that the matrix was typical of normal hyaline cartilage, being rich in collagen type II. After 8 weeks in cartilage lesions in vitro, dSRC constructs generated a contiguous cartilage matrix, while isolated cultured chondrocytes exhibited only a sparse pericellular matrix. dSRC-treated lesions exhibited high GAG production compared to those treated with isolated chondrocytes. CONCLUSIONS: Isolated dSRC exhibits hyaline cartilage formation, matures over time, and generates contiguous articular cartilage matrix in fractional laser-created microenvironments in vitro, being well integrated with native cartilage.
RESUMEN
BACKGROUND: Current clinical approaches to regenerate temporomandibular joint (TMJ) articulating cartilage defects only treat the symptoms (i.e. pain and dysfunction) and do not seek to restore joint integrity for long-term relief. Therefore, we investigated a novel self-assembling tissue-engineered cartilage to overcome this significant clinical issue for TMJ regenerative purposes. OBJECTIVES: Examine the maturation of dynamic self-regenerating cartilage (dSRC) using auricular chondrocytes and evaluate a novel combinatorial approach with fractional laser treatment and dSRC implantation for TMJ cartilage repair. MATERIALS AND METHODS: A suspension of 107 freshly harvested rabbit ear chondrocytes was cultured under a continuous reciprocating motion to form the dSRC. After 2, 4 and 8 weeks of culture, dSRC samples were stained with H&E, Safranin-O and Toluidine Blue. Immunohistochemistry (IHC) was performed for collagens type I and II. Channels (300-500 µm diameter and 1.2-1.5 mm depth) were created in six freshly harvested condyles using a fractional Erbium laser. Two groups were tested: dSRC in a laser-ablated lesion (experimental) and an empty laser-ablated channel (control). TMJ condyles were cultured for up to 8 weeks and analysed as described above. RESULTS: H&E staining showed a high cell density in dSRC compared to native cartilage. All dSRC groups demonstrated intense Safranin-O staining, indicating high glycosaminoglycan (GAG) production and intense Toluidine Blue staining showed high proteoglycan content. IHC confirmed that dSRC consisted predominantly of collagen type II. The experimental group showed improved cartilage repair at both time points compared to the empty channels. CONCLUSION: dSRC viability and successful matrix formation were demonstrated in vitro. The combination of fractional laser ablation and dSRC implantation enhanced cartilage repair.
Asunto(s)
Cartílago Articular , Condrocitos , Regeneración , Articulación Temporomandibular , Ingeniería de Tejidos , Animales , Conejos , Condrocitos/trasplante , Ingeniería de Tejidos/métodos , Articulación Temporomandibular/cirugía , Articulación Temporomandibular/patología , Regeneración/fisiología , Cartílago Articular/cirugía , Cartílago Articular/patología , Trastornos de la Articulación Temporomandibular/cirugía , Trastornos de la Articulación Temporomandibular/fisiopatología , Trastornos de la Articulación Temporomandibular/terapia , Células Cultivadas , Cartílago Auricular/fisiología , Técnicas In VitroRESUMEN
BACKGROUND: In the last decade, tissue-engineering strategies for regenerating the temporomandibular joint (TMJ) have been investigated. This may be a promising strategy for the minimally invasive restoration of joint integrity. OBJECTIVES: To evaluate whether dental pulp stem cells (DPSCs) loaded in a light-occured hydrogel made of gelatin methacryloyl (GelMA) enhance the regeneration of osteochondral defects in the rabbit TMJ. MATERIALS AND METHODS: Defects were filled with GelMA alone (control group; n = 4) or filled with GelMA loaded with rabbit DPSCs (experimental group; n = 4), In one group, the TMJ capsule was opened without creating a defect (sham group; n = 2). The following micro-CT parameters were analysed: bone volume to total volume ratio (BV/TV%) and bone mineral density (BMD). Histological evaluation was performed to assess cartilage regeneration features. A semi-quantitative scoring system was also used to evaluate the defects. RESULTS: All groups had no statistical difference regarding the micro-CT parameters. The highest mean healing score was found for the experimental group. After 4 weeks, there were no signs of hydrogel in either group or no signs of inflammation in the adjacent tissues. The tissue formed in the defect was dense fibrous connective tissue. CONCLUSION: Adding DPSCs to GelMA did not provide a regenerative enhancement in TMJ osteochondral defects. This resulted in similar micro-CT parameters after 4 weeks of healing, with improved signs of subchondral bone regeneration but no cartilage regeneration.
Asunto(s)
Pulpa Dental , Hidrogeles , Animales , Conejos , Articulación Temporomandibular , Ingeniería de Tejidos/métodos , Células MadreRESUMEN
OBJECTIVE: To assess the outcomes of several rodent animal models for studying tooth extraction-related medication-related osteonecrosis of the jaw (MRONJ). DESIGN: After a search of the databases, 2004 articles were located, and 118 corroborated the inclusion factors (in vivo studies in rodents evaluating tooth extraction as a risk factor for the development of MRONJ). RESULTS: Numerous studies attempting to establish an optimal protocol to induce MRONJ were found. Zoledronic acid (ZA) was the most used drug, followed by alendronate (ALN). Even when ZA did not lead to the development of MRONJ, its effect compromised the homeostasis of the bone and soft tissue. The association of other risk factors (dexamethasone, diabetes, and tooth-related inflammatory dental disease) besides tooth extraction also played a role in the development of MRONJ. In addition, studies demonstrated a relationship between cumulative dose and MRONJ. CONCLUSIONS: Both ZA and ALN can lead to MRONJ in rodents when equivalent human doses (in osteoporosis or cancer treatment) are used. Local oral risk factors and tooth-related inflammatory dental disease increase the incidence of MRONJ in a tooth extraction-related rodent model.
Asunto(s)
Osteonecrosis de los Maxilares Asociada a Difosfonatos , Conservadores de la Densidad Ósea , Animales , Humanos , Difosfonatos/efectos adversos , Conservadores de la Densidad Ósea/efectos adversos , Osteonecrosis de los Maxilares Asociada a Difosfonatos/etiología , Roedores , Ácido Zoledrónico/efectos adversos , Extracción Dental/efectos adversos , Modelos Animales , Alendronato/efectos adversosRESUMEN
PURPOSE: Photosealing of many biological tissues can be achieved using a biocompatible material in combination with a dye that is activated by visible light to chemically bond over the tissue defect via protein cross-linking reactions. The aim of this study was to test the efficacy of photosealing using a commercially available biomembrane (AmnioExcel Plus) to securely close dural defects in comparison to another sutureless method (fibrin glue) in terms of repair strength. METHODS: Two-millimeter diameter holes were created in dura harvested from New Zealand white rabbits and repaired ex vivo using one of two methods: (1) in n = 10 samples, photosealing was used to bond a 6-mm-diameter AmnioExcel Plus patch over the dural defect, and (2) in n = 10 samples, fibrin glue was used to attach the same patch over the dural defect. Repaired dura samples were then subjected to burst pressure testing. Histological analysis was also performed of photosealed dura. RESULTS: The mean burst pressures of rabbit dura repaired with photosealing and fibrin glue were 302 ± 149 mmHg and 26 ± 24 mmHg, respectively. The increased repair strength using photosealing was statistically significant and considerably higher than the normal intracranial pressure of ~ 20 mmHg. Histology demonstrated a tight union at the interface between the dura surface and patch with no disruption of the dura structure. CONCLUSION: The results of this study suggest that photosealing performs better than fibrin glue for the fixation of a patch for ex vivo repair of small dural defects. Photosealing is worthy of testing in pre-clinical models for the repair of dural defects.
Asunto(s)
Materiales Biocompatibles , Adhesivo de Tejido de Fibrina , Animales , Conejos , Materiales Biocompatibles/uso terapéutico , Duramadre/cirugía , Duramadre/patologíaRESUMEN
Periodontitis results from dysbiosis of the oral microbiome and affects up to 70% of US adults aged 65 years and older. More than 50 systemic inflammatory disorders and comorbidities are associated with periodontitis, many of which overlap with immunotherapy-associated toxicities. Despite the increasing use of immunotherapy for the treatment of cancer, uncertainty remains as to whether the microbial shift associated with periodontal disease can influence response rates and tolerance to cancer immunotherapy. We herein review the pathophysiology of periodontitis and the local and systemic inflammatory conditions related to oral dysbiosis, and discuss the overlapping adverse profiles of periodontitis and immunotherapy. The effects of the presence of Porphyromonas gingivalis, a key pathogen in periodontitis, highlight how the oral microbiome can affect the hosts' systemic immune responses, and further research into the local and systemic influence of other microorganisms causing periodontal disease is necessary. Addressing periodontitis in an ageing population of people with cancer could have potential implications for the clinical response to (and tolerability of) immunotherapy and warrants further investigation.
Asunto(s)
Neoplasias , Enfermedades Periodontales , Periodontitis , Humanos , Disbiosis , Periodontitis/epidemiología , Periodontitis/terapia , Porphyromonas gingivalis , Neoplasias/complicaciones , Neoplasias/terapia , Inmunoterapia/efectos adversosRESUMEN
Critical-sized bone defects (CSBDs) represent a significant clinical challenge, stimulating researchers to seek new methods for successful bone reconstruction. The aim of this systematic review is to assess whether bone marrow stem cells (BMSCs) combined with tissue-engineered scaffolds have demonstrated improved bone regeneration in the treatment of CSBD in large preclinical animal models. A search of electronic databases (PubMed, Embase, Web of Science, and Cochrane Library) focused on in vivo large animal studies identified 10 articles according to the following inclusion criteria: (1) in vivo large animal models with segmental bone defects; (2) treatment with tissue-engineered scaffolds combined with BMSCs; (3) the presence of a control group; and (4) a minimum of a histological analysis outcome. Animal research: reporting of in Vivo Experiments guidelines were used for quality assessment, and Systematic Review Center for Laboratory animal Experimentation's risk of bias tool was used to define internal validity. The results demonstrated that tissue-engineered scaffolds, either from autografts or allografts, when combined with BMSCs provide improved bone mineralization and bone formation, including a critical role in the remodeling phase of bone healing. BMSC-seeded scaffolds showed improved biomechanical properties and microarchitecture properties of the regenerated bone when compared with untreated and scaffold-alone groups. This review highlights the efficacy of tissue engineering strategies for the repair of extensive bone defects in preclinical large-animal models. In particular, the use of mesenchymal stem cells, combined with bioscaffolds, seems to be a successful method in comparison to cell-free scaffolds.
RESUMEN
OBJECTIVE: Synovial chondromatosis (SC) of the temporomandibular joint (TMJ) is a synovial membrane disease characterized by the formation of cartilaginous nodules (CN), that may erode the skull base. Historically, cases with skull base involvement have been treated with open surgery. We report a case of TMJ SC with skull base perforation treated and repaired via minimally invasive TMJ arthroscopy and describe the advanced endoscopic operative maneuvers performed. CASE REPORT: A 34-year-old male presented with a 4-year history of malocclusion and right TMJ arthralgia. Clinical examination demonstrated malocclusion and direct pressure loading pain. Advanced imaging revealed glenoid fossa erosion and numerous homogenous hypointense lesions within an effusion. The initial surgical plan included diagnostic TMJ arthroscopy followed by conversion to open arthroplasty. Endoscopic operative maneuvers allowed for the accomplishment of the surgical goals, completely arthroscopically. Histopathology confirmed SC, and the patient remains on observation, with relief of symptoms. CONCLUSION: Advanced arthroscopy is a viable treatment option for select cases of TMJ SC with skull base involvement that allowed for access to the joint space, retrieval of biopsy specimens and CN, and repair of the skull defect.
Asunto(s)
Condromatosis Sinovial , Trastornos de la Articulación Temporomandibular , Masculino , Humanos , Adulto , Condromatosis Sinovial/diagnóstico por imagen , Condromatosis Sinovial/cirugía , Condromatosis Sinovial/patología , Trastornos de la Articulación Temporomandibular/diagnóstico por imagen , Trastornos de la Articulación Temporomandibular/cirugía , Trastornos de la Articulación Temporomandibular/patología , Tomografía Computarizada por Rayos X , Articulación Temporomandibular/patología , Base del Cráneo/patología , Base del Cráneo/cirugíaRESUMEN
BACKGROUND: Tissue engineering of skin and mucosa is essential for the esthetic and functional reconstruction of individuals disfigured by trauma, resection surgery, or severe burns while overcoming the limited amount of autograft and donor site morbidity. PURPOSE: We aimed to determine whether a combination of Gelatin-methacryloyl (GelMA) hydrogel scaffold alone or loaded with either dental pulp stem cells (DPSCs) and/or vascular endothelial growth factor (VEGF) could improve skin wound healing in rats. MATERIALS AND METHODS: Four 10 mm full-thickness skin defects were created on the dorsum of 15 Sprague-Dawley rats. The wounds were treated with GelMA alone, GelMA+DPSCs, or GelMA+DPSCs+VEGF. Unprotected wounds were used as controls. Animals were euthanized at 1-, 2-, and 4 weeks post-surgery, and the healing wounds were harvested for clinical, histological, and RT-PCR analysis. RESULTS: No signs of clinical inflammation were observed among all groups. Few and sparse mononuclear inflammatory cells were observed in GelMA+DPSCs and GelMA+DPSCs+VEGF groups at 2 weeks, with complete epithelialization of the wounds. At 4 weeks, the epidermis in GelMA+DPSCs and GelMA+DPSCs+VEGF groups was indistinguishable from the empty defect and GelMA groups. The decrease in cellularity and increase in density of collagen fibers were observed over time in both GelMA+DPSCs and GelMA+DPSCs+VEGF groups but were more evident in the GelMA+DPSCs+VEGF group. The GelMA+DPSCs+VEGF group showed a higher expression of the KER 10 gene at all time points compared with the other groups. Expression of Col1 A1 and TGFß-1 were not statistically different over time neither among the groups. CONCLUSION: GelMA scaffolds loaded with DPSCs, and VEGF accelerated the re-epithelialization of skin wounds.
Asunto(s)
Gelatina , Factor A de Crecimiento Endotelial Vascular , Ratas , Animales , Humanos , Factor A de Crecimiento Endotelial Vascular/metabolismo , Ratas Sprague-Dawley , Pulpa Dental/metabolismo , Células MadreRESUMEN
Background. There have been few advances in technique since vascular anastomosis was performed with silk suture on a curved needle in 1902. This technique results in disruption of the endothelium with exposed intraluminal suture, both of which may lead to thrombocyte aggregation, intimal hyperplasia, and vascular stenosis. A variety of alternative techniques have been explored, with limited success. Photochemical tissue bonding (PTB) is a light-activated methodology of rapidly cross-linking tissue interfaces at the molecular level. Herein, we describe a new technique for anastomosis of venous interposition graft in an ovine model of femoral artery bypass utilizing PTB. Methods. Polypay specific pathogen free sheep (n = 5; 40-45 kg) underwent femoral artery bypass utilizing saphenous vein. The femoral artery was transected and reversed saphenous vein was implanted as an interposition graft. The proximal anastomosis was created as a vein-over-artery cuff utilizing PTB, and the distal anastomosis was created with standard interrupted 8-0 polypropylene suture. Four weeks post-index operation, femoral angiogram was performed to evaluate patency, tortuosity, and luminal diameter. All bypass grafts were harvested and longitudinal and transverse histological sections from the proximal anastomosis were analyzed. Results. The PTB anastomoses (n = 5) were immediately watertight and patent. All animals survived the 28-day study duration. Angiography revealed patent grafts with no aneurysm or stenosis (n = 5). Histologic examination revealed integration of the venous endothelium with the arterial adventitia. Conclusion. Photochemical tissue bonding creates an immediate strong, watertight vascular anastomosis that can withstand physiologic arterial pressure and remains patent at 28 days without the need for intraluminal suture.
Asunto(s)
Procedimientos Quirúrgicos Vasculares , Animales , Ovinos , Grado de Desobstrucción Vascular , Constricción Patológica , Anastomosis Quirúrgica/métodosRESUMEN
OBJECTIVES: Mesenchymal stem/progenitor cells (MSPCs) are critical for tissue regeneration. Moreover, the CD105 antigen identifies early MSPCs with increased chondrogenic differentiation ability. We hypothesized that amine-(NH2)-functionalized biosilica incorporating hydrogel scaffolds, seeded with mCoSPCs105+ would contribute to creating tissue-engineered scaffolds, capable of de novo cartilage synthesis. MATERIALS AND METHODS: Scaffolds were characterized by water uptake, lysozyme degradation, axial compression, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Differentiation stimulus of scaffold functionalization was evaluated using Alcian blue staining. Cartilage-forming abilities of mCoSPCs105+ were evaluated using Quantitative reverse transcription polymerase chain reaction (qRT-PCR) and immunohistochemistry. RESULTS: Biosilica particle incorporation into scaffolds resulted in increased water uptake capacity and compression force withstanding abilities. Amine-(NH2)-group functionalization of biosilica led to significantly increased stem cell differentiation potential, by Alcian blue staining, in the first 3 weeks. Scaffold attachment and viable cell proliferation were observed for 6 weeks under chondrogenic differentiation. Downregulation of Runx2, an increase of Col10a1, Ihh, and maintenance of Sox9, was seen under these culture conditions. mCoSPCs105+ gene expression pattern was defined by the significant upregulation of Col1a1, Col2a1, Prg4, and Agc-1 over 6 weeks of incubation compared to the unsorted control. Immunostaining of cell-seeded scaffolds revealed significantly higher secretion of proteins relevant to cartilage extracellular matrix. CONCLUSION: The preselecting of CD105+ phenotype in MSPCs may enhance tissue regeneration of fibrocartilage and biosilica nanoparticles may be a beneficial additive in tissue engineering of scaffolds.
Asunto(s)
Hidrogeles , Células Madre Mesenquimatosas , Ratones , Animales , Hidrogeles/química , Hidrogeles/metabolismo , Azul Alcián/metabolismo , Diferenciación Celular , Andamios del Tejido/química , Ingeniería de Tejidos , Células Madre Mesenquimatosas/metabolismo , Condrogénesis , Células CultivadasRESUMEN
The aims of this study were to analyze prospectively and comparatively the peri-implant bone crest levels, bone density, stability and success rate of implants with different surface treatments in human edentulous mandibles. Twenty edentulous patients were selected. Four different implants were placed between the mental foramen. Four groups were evaluated: (1) laser-modified surface (LASER), (2) surface modified by laser with deposition of apatites (LASER + HA), (3) surface modified by double acid etching (ACID, Implacil De Bortoli) and (4) surface modified by sandblasting and acid etching (SLActive®, Straumann). Clinical, radiographic, resonance frequency and tomographic analyses were used. After 4 months, mandibular fixed implant prostheses were installed. Clinical and radiographic analyses were performed at times T0 (immediately after implant placement), T1 (15 days), T2 (30 days), T3 (60 days), T4 (90 days), T5 (120 days), T6 (180 days) and T7 (360 days), post-implant placement. The resonance frequency analysis (RFA) was measured at T0, T4, T6 and T7. The tomographic analysis was performed at T0, T4 and T7. In the radiographic bone density analysis, a statistical difference was found between the SLActive® and LASER + HA groups at T4 (p < 0.05). Statistical differences were observed in RFA at T4 (90 days), between the SLActive® and LASER groups (p < 0.05) and between the SLActive® and LASER + HA groups (p < 0.05). At T6 and T7, statistical differences were found between the SLActive® group and all other implant surfaces (p < 0.01). The experimental surfaces analyzed showed encouraging positive outcomes compared to those of the SLActive® surface. Long-term follow-up should be performed to confirm these results.
RESUMEN
OBJECTIVE: The objective of this study was 2-fold: (1) to describe the rabbit temporomandibular joint (TMJ) anatomy and (2) to provide a detailed, step-by-step description of a minimally invasive approach to perform a standard osteochondral TMJ defect that can be used to investigate the regenerative potential of biomaterials. STUDY DESIGN: This study was performed in 2 steps. In the first, a total of 8 rabbit carcasses (n = 16 joints) were used to study the normal TMJ anatomy and histology to develop a minimally invasive approach to access the articulating surface of the condyle to perform a standard osteochondral defect. In the second, the surgical procedure was performed in 10 live animals to evaluate the feasibility of the model and to evaluate the regenerative potential of a biodegradable light-cured hydrogel seeded with stem cells (results not shown). RESULTS: The cartilage of the mandibular condyle showed 4 layers: fibrous, proliferative, hypertrophic, and a zone of calcified cartilage. Positive safranin O staining was observed in the cartilage. The mean duration of the procedure (from incision to last stitch) was 35.5 (±9.21) minutes. All animals survived the procedures without any major complications. CONCLUSIONS: This animal model represents an easy and nonmorbid surgical approach to rabbit TMJ.
Asunto(s)
Cartílago Articular , Trastornos de la Articulación Temporomandibular , Animales , Materiales Biocompatibles , Cartílago Articular/cirugía , Humanos , Cóndilo Mandibular/patología , Conejos , Regeneración , Articulación Temporomandibular/patología , Articulación Temporomandibular/cirugía , Trastornos de la Articulación Temporomandibular/patología , Andamios del TejidoRESUMEN
INTRODUCTION: Orthodontic tooth movement is reliant on the process of bone remodeling, and a variety of medications impact the ability of teeth to move through bone. Marijuana is the most widely used recreational drug in the world, and early studies suggest the drug impacts bone remodeling as tetrahydrocannabinol binds to cannabinoid receptors which play a role in bone homeostasis. This study aimed to assess the impact of dronabinol on alveolar bone remodeling in rats with otherwise healthy tissue when subjected to orthodontic forces. METHODS: Thirty male Sprague Dawley rats were equally allocated into 2 groups. Orthodontic appliances were placed in all animals, which consisted of a nickel-titanium coil ligated from the maxillary first molar to the central incisor. The appliance was activated to deliver a force to move teeth together. Over 21 days, daily injections of either dronabinol or the control (solvent) were given to the rats. Cephalometric analysis, histology, and bone remodeling profiles of both groups were analyzed and compared. RESULTS: Teeth moved in both the dronabinol and control groups (P <0.05). Tooth movement in the control group followed the typical process of orthodontic tooth movement: periodontal width narrowing and bone resorption on the compression side of the tooth, with an overall decrease in the height of the alveolar bone. In contrast, the dronabinol group showed an abnormal response to tooth movement: no bone resorption on the compression side of the tooth, increased bone formation on the tension side, and the maintenance of the height of the alveolar crest. In the dronabinol group, there were also significantly more osteoclasts and osteoblasts in the alveolar bone than in the control group. CONCLUSIONS: These results demonstrate that dronabinol attenuates orthodontic tooth movement by decreasing bone resorption, which could have implications for other bone-related recovery processes.
Asunto(s)
Dronabinol , Técnicas de Movimiento Dental , Proceso Alveolar/patología , Animales , Remodelación Ósea/fisiología , Dronabinol/farmacología , Masculino , Osteoclastos/patología , Ratas , Ratas Sprague-Dawley , Técnicas de Movimiento Dental/métodosRESUMEN
PURPOSE: The purpose of this study was to develop and characterize beta-tricalcium phosphate (ß-TCP)/polycaprolactone (PCL) scaffolds, with 2 different ratios (50/50% and 65/35%), using 3-dimensionally (3D) printed dissolvable molds, and to evaluate cellular growth and osteogenic differentiation of both groups seeded with porcine bone marrow stem cells (pBMSCs) under dynamic culture in vitro. MATERIALS AND METHODS: Two different groups of scaffolds were produced: group 1 (n = 40) with a ratio (wt%) of 50/50% and group 2 (n = 40) with 65/35% of ß-TCP/PCL. Physicochemical, morphological, and mechanical characterization of the scaffolds were performed. Scaffolds were seeded with pBMSCs and differentiated osteogenically in dynamic culture. Cell density, distribution, and viability were assessed. Osteogenic differentiation was examined through alkaline phosphatase (ALP) staining, immunofluorescence, and photospectrometry. RESULTS: Osteogenic differentiated constructs showed homogenous and viable cell distribution. Cell density was significantly higher (P < .05) for 65/35% scaffolds at 10 days postseeding, whereas at 6 weeks, cell number equalized for both groups. ALP activity increased over time and was significantly higher (P < .05) for 65/35% scaffolds at 14 days postseeding. CONCLUSIONS: The mechanical properties of the developed 65/35% scaffolds were within the range of natural trabecular bone. Moreover, the 65/35% scaffolds showed biological advantages, such as higher cell growth and higher ALP activity.
Asunto(s)
Osteogénesis , Andamios del Tejido , Animales , Huesos , Fosfatos de Calcio/farmacología , Diferenciación Celular , Proliferación Celular , Células Cultivadas , Humanos , Poliésteres/química , Porcinos , Andamios del Tejido/químicaRESUMEN
PURPOSE: Several animal models of temporomandibular joint ankylosis (TMJA) have been described for more than the past 2 decades. The aim of this study was 2-fold: 1) to compile and summarize the evidence of animal studies that compare different forms to induce, treat (disease already established), or prevent (after trauma) TMJA; and 2) to address the following focused question: what is the quality of reporting in these studies? MATERIALS AND METHODS: A systematic review was conducted. Animal studies conducted up to October 2019 comparing at least 2 procedures to induce, treat (disease already established), or prevent (after trauma) TMJA were considered. Compliance with the Animal Research Reporting In Vivo Experiments guidelines was checked for all studies. Studies evaluating treatment of TMJA or preventive measures also were evaluated using the SYstematic Review Center for Laboratory animal Experimentation's risk of bias tool for animal studies. RESULTS: A total of 24 studies were included. The studies were evaluated for feasibility regarding data synthesis, and a meta-analysis was not suitable because of methodological differences, mainly regarding the animal model chosen and surgical procedures performed to induce TMJA. In 17 articles, authors aimed to investigate different procedures to induce TMJA (fibrous, fibro-osseous, or bony). In 7 articles, different treatment or preventive strategies were compared. The sheep was the most used animal in models of TMJA. Only 25% (6 of 24) of studies reported some step to minimize bias (ie, blinding of investigators, randomization procedures, or allocation concealment). Approximately 54% (13 of 24) of articles clearly commented on study limitations and potential sources of bias. Further animal studies on TMJA should consider improving their reporting standards to increase their validity and improve the reproducibility of animal experiments.
Asunto(s)
Anquilosis , Trastornos de la Articulación Temporomandibular , Animales , Anquilosis/prevención & control , Anquilosis/cirugía , Artroplastia , Reproducibilidad de los Resultados , Ovinos , Articulación Temporomandibular/cirugía , Trastornos de la Articulación Temporomandibular/prevención & control , Trastornos de la Articulación Temporomandibular/cirugíaRESUMEN
Perform a physicochemical and morphological characterization of a Ti-15Mo alloy surface modified by laser beam irradiation and to evaluate in vitro the morphological response and proliferation of osteoblastic cells seeded onto this alloy. Disks were made of two different metals, Ti-15Mo alloy and cpTi, used as control. A total of four groups were evaluated: polished cpTi (cpTi-pol), laser-irradiated cpTi (cpTi-L), polished Ti-15Mo alloy (Ti-15Mo-pol), and laser-irradiated Ti-15Mo alloy (Ti-15Mo-L). Before and after laser irradiation of the surfaces, physicochemical and morphological analyses were performed: scanning electron microscopy (FEG-SEM), energy-dispersive spectroscopy (EDX), and X-ray diffraction (XRD). The wettability of the samples was evaluated by contact angle measurement. Murine preosteoblastic cells MC3T3-E1 were cultured onto the experimental disks for cell proliferation, morphology, and spreading analyses. Laser groups presented irregular-shaped cavities on its surface and a typical microstructured surface with large depressions (FEG-SEM). The contact angle for both laser groups was 0°, whereas for the polished groups was ≈ 77 and ≈ 78 for cpTi-pol and Ti-15Mo-pol, respectively. Cell proliferation analysis demonstrated a higher metabolic activity in the laser groups (p < 0.05). From the fluorescence microscopy, Ti-15Mo-L surface seems to induce greater cellular differentiation compared to the cpTi-L surface. The preliminary biological in vitro analyses suggested possible advantages of laser surface treatment in the Ti-15Mo alloy regarding cell proliferation and maturation.
Asunto(s)
Aleaciones/química , Aleaciones/farmacología , Rayos Láser , Animales , Línea Celular , Proliferación Celular/efectos de los fármacos , Proliferación Celular/efectos de la radiación , Forma de la Célula/efectos de los fármacos , Forma de la Célula/efectos de la radiación , Fluorescencia , Ratones , Microscopía Electrónica de Rastreo , Espectrometría por Rayos X , Propiedades de Superficie , Difracción de Rayos XRESUMEN
PURPOSE: To investigate the influence of different materials and fixation methods on maximum principal stress (MPS) and displacement in reconstruction plates using in silico 3-dimensional finite element analysis (3D-FEA). MATERIALS AND METHODS: Computer-assisted designed (CAD) models of the mandible and teeth were constructed. Champy and AO/ASIF plates and fixation screws were designed with CAD software. 3D-FEA was performed by image-based CAE software. Maximum and minimum values of biomechanical stability, MPS, and displacement distribution were compared in Champy and AO/ASIF plates made from commercially pure titanium grade 2 (cp-Ti) and a titanium-and-molybdenum (14.47% wt) alloy (Ti-15Mo). RESULTS: For plates fixed on a model of a fractured left angle of the mandible, the maximum and minimum values of MPS in the cp-Ti-constructed Champy plate, upper AO/ASIF plate, and lower AO/ASIF plate were 19.5 and 20.3%, 15.2 and 25.3%, and 21.4 and 4.6% lower, respectively, than those for plates made from Ti-15Mo. In the same model, the maximum and minimum values of displacement in the cp-Ti-constructed Champy plate, upper AO/ASIF plate, and lower AO/ASIF plate were 1.6 and 3.8%, 3.1 and 2.7%, and 5.4 and 10.4% higher, respectively, than those for plates made from Ti-15Mo. CONCLUSIONS: This in silico 3D-FEA shows that Ti-15Mo plates have greater load-bearing capability.
Asunto(s)
Placas Óseas , Simulación por Computador , Fracturas Mandibulares/cirugía , Titanio , Fenómenos Biomecánicos , Humanos , Procedimientos Ortopédicos/métodos , Procedimientos de Cirugía Plástica/métodosRESUMEN
Application of recombinant human bone morphogenetic protein 2 (rhBMP-2) to implant surfaces has been of great interest due to its osteoinductive potential. However, the optimal coating methodology has not been clarified. The objective of the study was to determine whether the application of rhBMP-2 onto plasma-sprayed hydroxyapatite implant surfaces by immersion in protein solution before implant installation would result in significantly improved bone apposition. Using a sheep iliac model, titanium (Ti) and plasma-sprayed calcium-phosphate (PSCaP)-coated implants uncoated and coated with rhBMP-2 were assessed for their osteogenic effects in the peri-implant area over time in terms of osseointegration and de novo bone formation. After 3 and 6 weeks postoperatively, the samples were retrieved and were subjected to bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) evaluation. When rhBMP-2 was applied to the PSCaP surface, significant increases in BIC and BAFO were observed at 3 weeks in vivo, whereas when adsorbed directly onto the titanium implant surface, rhBMP-2 did not as effectively improve the bone response (although significantly higher than control Ti). The outcomes of the present study suggested that the combination of plasma-sprayed calcium-phosphate surface and rhBMP-2 coating significantly enhanced osseointegration, which validated the postulated hypothesis.