RESUMEN
The development of rapid, accurate, sensitive, and low-cost diagnostic methods for COVID-19 detection in real-time is the unique way to control infection sources and monitor illness progression. In this work, we propose an electrochemical biosensor for the rapid and accuracy diagnosis of COVID-19, through the determination of ORF1ab specific sequence. The biosensor is based on the immobilization of a thiolated sequence partially complementary (domain 1) to ORF1ab on gold screen-printed electrodes and the use of bifunctional Au@Pt/Au core@shell nanoparticles modified with a second thiolated sequence partially complementary to ORF1ab (domain 2) as electrochemical indicator of the hybridization of DNA sequences. The synthesized Au@Pt/Au nanoparticles consist of an Au core, a shell of Pt (Au@Pt NPs), that provides an excellent electrocatalytic activity toward the oxygen reduction reaction (ORR) even after formation of hybrid biomaterials by modification, through the Au protuberances growth on the NPs surface, with an oligonucleotide with recognition ability. The ORR electrochemical activity, enhanced by the label element (Au@Pt/Au NPs), has been employed, for the first time, as indicator of the hybridization event. Based on this strategy, target sequences of the SARS-CoV-2 virus have been detected with a detection limit of 32 pM. The selectivity of the biosensor was confirmed by analysing ORF1ab sequence in the presence of DNA sequences from other viruses. The biosensor has been successfully applied to the direct detection of the virus in non-amplified samples of nasopharyngeal swabs from infected and non-infected patients. Results compare well with those obtained through RT-qPCR but our method is more rapid since does not need any amplification process.
RESUMEN
A novel immunosensor based on electrochemiluminescence resonance energy transfer (ECL-RET) for the sensitive determination of N protein of the SARS-CoV-2 coronavirus is described. For this purpose, bifunctional core@shell nanoparticles composed of a Pt-coated Au core and finally decorated with small Au inlays (Au@Pt/Au NPs) have been synthesized to act as ECL acceptor, using [Ru (bpy)3]2+ as ECL donor. These nanoparticles are efficient signaling probes in the immunosensor developed. The proposed ECL-RET immunosensor has a wide linear response to the concentration of N protein of the SARS-CoV-2 coronavirus with a detection limit of 1.27 pg/mL. Moreover, it has a high stability and shows no response to other proteins related to different virus. The immunosensor has achieved the quantification of N protein of the SARS-CoV-2 coronavirus in saliva samples. Results are consistent with those provided by a commercial colorimetric ELISA kit. Therefore, the developed immunosensor provides a feasible and reliable tool for early and effective detection of the virus to protect the population.
Asunto(s)
Técnicas Biosensibles , COVID-19 , Nanopartículas del Metal , Humanos , Oro , SARS-CoV-2 , Mediciones Luminiscentes/métodos , Técnicas Biosensibles/métodos , Inmunoensayo/métodos , COVID-19/diagnóstico , Técnicas Electroquímicas/métodos , Límite de DetecciónRESUMEN
In this work, we present the combination of two different types of nanomaterials, 2D molybdenum disulfide nanosheets (MoS2-NS) and zero-dimensional carbon nanodots (CDs), for the development of a new electrochemiluminescence (ECL) platform for the early detection and quantification of the biomarker human epidermal growth factor receptor 2 (HER2), whose overexpression is associated with breast cancer. MoS2-NS are used as an immobilization platform for the thiolated aptamer, which can recognize the HER2 epitope peptide with high affinity, and CDs act as coreactants of the anodic oxidation of the luminophore [Ru(bpy)3]2+. The HER2 biomarker is detected by changes in the ECL signal of the [Ru(bpy)3]2+/CD system, with a low detection limit of 1.84 fg/mL and a wide linear range. The proposed method has been successfully applied to detect the HER2 biomarker in human serum samples.
Asunto(s)
Técnicas Biosensibles , Neoplasias de la Mama , Humanos , Femenino , Carbono , Biomarcadores de Tumor , Molibdeno , Neoplasias de la Mama/diagnóstico , Fotometría , Mediciones Luminiscentes/métodos , Técnicas Electroquímicas/métodos , Técnicas Biosensibles/métodos , Límite de DetecciónRESUMEN
Given the great utility that having fast, efficient and cost-effective methods for the detection of SARS-CoV-2 in wastewater can have in controlling the pandemic caused by this virus, the development of new dependable and specific SARS-CoV-2 coronavirus sensing devices to be applied to wastewater is essential to promote public health interventions. Therefore, herein we propose a new method to detect SARS-CoV-2 in wastewater based on a carbon nanodots-amplified electrochemiluminescence immunosensor for the determination of the SARS-CoV-2 Spike S1 protein. For the construction of the immunosensor, N-rich carbon nanodots have been synthetized with a double function: to contribute as amplifiers of the electrochemiluminescent signal in presence of [Ru(bpy)3]2+ and as antibody supports by providing functional groups capable of covalently interacting with the SARS-CoV-2 Spike S1 antibody. The proposed ECL immunosensor has demonstrated a high specificity in presence of other virus-related proteins and responded linearly to SARS-CoV-2 Spike S1 concentration over a wide range with a limit of detection of 1.2 pg/mL. The immunosensor has an excellent stability and achieved the detection of SARS-CoV-2 Spike S1 in river and urban wastewater, which supplies a feasible and reliable sensing platform for early virus detection and therefore to protect the population. The detection of SARS-CoV-2 Spike S1 in urban wastewater can be used as a tool to measure the circulation of the virus in the population and to detect a possible resurgence of COVID-19.
Asunto(s)
Técnicas Biosensibles , COVID-19 , Técnicas Biosensibles/métodos , COVID-19/diagnóstico , Carbono , Humanos , Inmunoensayo/métodos , SARS-CoV-2 , Aguas ResidualesRESUMEN
A direct and simple fluorescent assay for the total polyphenol determination based on the bioconjugate formed between the laccase enzyme (TvL from Trametes versicolor) and carbon nanodots (CD) is developed. One of the most used reactions for the determination of phenols is based on the enzymatic reaction of their oxidation to quinones. In this work, CD has been biofunctionalized with TvL (TvL-CD) and employed as a fluorescent label to follow the enzymatic reaction. The bioconjugate was formed and characterized by spectroscopy and microscopy. The optimal TvL-CD ratio was established. The reaction between the bioconjugate and a phenolic compound such as gallic acid (GA) was followed by monitoring the fluorescence bioconjugate decrease due to the quenching effect of the quinones generated in the enzymatic reaction. These studies confirm that bioconjugation does not inhibit the enzymatic activity and the fluorescence decrease during the enzymatic reaction is mainly due to an electron transfer processes. Based on these results, a new method for the quantitative determination of polyphenols measured as GA concentration is developed. The detection and quantification limit was found to be 7.4 and 25 µM, respectively. Subsequently, the method has been applied to the direct determination of GA in wine, juice, and rice leaf extracts.
Asunto(s)
Polifenoles , Trametes , Colorantes , Pruebas de Enzimas , Ácido Gálico , Lacasa/química , Fenoles , QuinonasRESUMEN
A simple carbon nanodot-based electrogenerated chemiluminescence biosensor is described for sensitive and selective detection of microRNA-21 (miRNA-21), a biomarker of several pathologies including cardiovascular diseases (CVDs). The photoluminescent carbon nanodots (CNDs) were obtained using a new synthesis method, simply by treating tiger nut milk in a microwave reactor. The synthesis is environmentally friendly, simple, and efficient. The optical properties and morphological characteristics of the CNDs were exhaustively investigated, confirming that they have oxygen and nitrogen functional groups on their surfaces and exhibit excitation-dependent fluorescence emission, as well as photostability. They act as co-reactant agents in the anodic electrochemiluminescence (ECL) of [Ru(bpy)3]2+, producing different signals for the probe (single-stranded DNA) and the hybridized target (double-stranded DNA). These results paved the way for the development of a sensitive ECL biosensor for the detection of miRNA-21. This was developed by immobilization of a thiolated oligonucleotide, fully complementary to the miRNA-21 sequence, on the disposable gold electrode. The target miRNA-21 was hybridized with the probe on the electrode surface, and the hybridization was detected by the enhancement of the [Ru(bpy)3]2+/DNA ECL signal using CNDs. The biosensor shows a linear response to miRNA-21 concentration up to 100.0 pM with a detection limit of 0.721 fM. The method does not require complex labeling steps, and has a rapid response. It was successfully used to detect miRNA-21 directly in serum samples from heart failure patients without previous RNA extraction neither amplification process.
Asunto(s)
Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodos , Sustancias Luminiscentes/química , Mediciones Luminiscentes/métodos , MicroARNs/sangre , Puntos Cuánticos/química , Técnicas Biosensibles/instrumentación , Carbono/química , Complejos de Coordinación/química , Técnicas Electroquímicas/instrumentación , Electrodos , Oro/química , Insuficiencia Cardíaca/sangre , Humanos , Ácidos Nucleicos Inmovilizados/genética , Límite de Detección , Mediciones Luminiscentes/instrumentación , Masculino , MicroARNs/genética , Hibridación de Ácido Nucleico , Oligodesoxirribonucleótidos/química , Oligodesoxirribonucleótidos/genética , Compuestos de Rutenio/químicaRESUMEN
The decrease of greenhouse gases such as CO2 has become a key challenge for the human kind and the study of the electrocatalytic properties of CO2-reducing enzymes such as formate dehydrogenases is of importance for this goal. In this work, we study the covalent bonding of Desulfovibrio vulgaris Hildenborough FdhAB formate dehydrogenase to chemically modified gold and low-density graphite electrodes, using electrostatic interactions for favoring oriented immobilization of the enzyme. Electrochemical measurements show both bioelectrocatalytic oxidation of formate and reduction of CO2 by direct electron transfer (DET). Atomic force microscopy and quartz crystal microbalance characterization, as well as a comparison of direct and mediated electrocatalysis, suggest that a compact layer of formate dehydrogenase was anchored to the electrode surface with some crosslinked aggregates. Furthermore, the operational stability for CO2 electroreduction to formate by DET is shown with approximately 100% Faradaic yield.
Asunto(s)
Desulfovibrio vulgaris/enzimología , Enzimas Inmovilizadas/química , Formiato Deshidrogenasas/química , Oro/química , Grafito/química , Dióxido de Carbono/química , Electrodos , Modelos Moleculares , Oxidación-ReducciónRESUMEN
Electrogenerated chemiluminescence (also called electrochemiluminescence (ECL)) has become a great focus of attention in different fields of analysis, mainly as a consequence of the potential remarkably high sensitivity and wide dynamic range. In the particular case of sensing applications, ECL biosensor unites the benefits of the high selectivity of biological recognition elements and the high sensitivity of ECL analysis methods. Hence, it is a powerful analytical device for sensitive detection of different analytes of interest in medical prognosis and diagnosis, food control and environment. These wide range of applications are increased by the introduction of screen-printed electrodes (SPEs). Disposable SPE-based biosensors cover the need to perform in-situ measurements with portable devices quickly and accurately. In this review, we sum up the latest biosensing applications and current progress on ECL bioanalysis combined with disposable SPEs in the field of bio affinity ECL sensors including immunosensors, DNA analysis and catalytic ECL sensors. Furthermore, the integration of nanomaterials with particular physical and chemical properties in the ECL biosensing systems has improved tremendously their sensitivity and overall performance, being one of the most appropriates research fields for the development of highly sensitive ECL biosensor devices.
Asunto(s)
Técnicas Biosensibles , Técnicas Electroquímicas , Mediciones Luminiscentes , Electrodos , NanoestructurasRESUMEN
Adenosine triphosphate (ATP) is a key molecule as energy vector for living organisms, therefore its detection reveals the presence of microbial colonies. Environments where the existence of microbial pathogens suppose a health hazard can benefit from real time monitoring of such molecule. We report a potentiometric biosensor based on ATP-synthase from Escherichia coli reconstituted in a floating phospholipid bilayer over gold electrodes modified with a 4-aminothiophenol self-assembled monolayer. The use of a pH-dependent redox probe on the electrode surface allows a simple, specific and reliable on site determination of ATP concentration from 1 µM to 1 mM. The broad range ATP biosensor can offer an alternative way of measuring in a few minutes the presence of microbial contamination.
Asunto(s)
Adenosina Trifosfatasas/química , Adenosina Trifosfato/análisis , Técnicas Biosensibles/métodos , Escherichia coli/enzimología , Oro/química , Compuestos de Anilina/química , Electrodos , Enzimas Inmovilizadas/química , Límite de Detección , Membrana Dobles de Lípidos/química , Potenciometría/métodos , Protones , Compuestos de Sulfhidrilo/químicaRESUMEN
This work reports on the advantages of using carbon nanodots (CNDs) in the development of reagent-less oxidoreductase-based biosensors. Biosensor responses are based on the detection of H2O2, generated in the enzymatic reaction, at 0.4 V. A simple and fast method, consisting of direct adsorption of the bioconjugate, formed by mixing lactate oxidase, glucose oxidase, or uricase with CNDs, is employed to develop the nanostructured biosensors. Peripherical amide groups enriched CNDs are prepared from ethyleneglycol bis-(2-aminoethyl ether)-N,N,N',N'-tetraacetic acid and tris(hydroxymethyl)aminomethane, and used as precursors. The bioconjugate formed between lactate oxidase and CNDs was chosen as a case study to determine the analytical parameters of the resulting L-lactate biosensor. A linear concentration range of 3.0 to 500 µM, a sensitivity of 4.98 × 10-3 µA·µM-1, and a detection limit of 0.9 µM were obtained for the L-lactate biosensing platform. The reproducibility of the biosensor was found to be 8.6%. The biosensor was applied to the L-lactate quantification in a commercial human serum sample. The standard addition method was employed. L-lactate concentration in the serum extract of 0.9 ± 0.3 mM (n = 3) was calculated. The result agrees well with the one obtained in 0.9 ± 0.2 mM, using a commercial spectrophotometric enzymatic kit.
Asunto(s)
Técnicas Biosensibles/instrumentación , Electroquímica/instrumentación , Nanotubos de Carbono/química , Oxidorreductasas/metabolismo , Fluorescencia , Humanos , Indicadores y Reactivos , Ácido Láctico/sangre , Oxigenasas de Función Mixta/metabolismo , Espectrofotometría UltravioletaRESUMEN
A novel electrochemiluminescence (ECL) sensor for the sensitive detection of taurine was developed. Taurine contains an aliphatic amine that gives it co-reactant properties. The ECL response of the taurine/[Ru(bpy)3]2+ system was analyzed on two different electrodes surfaces, screen-printed graphene and gold electrodes, before and after modification with ZnO nanowires (ZnO NWs). The ZnO NWs modified electrode yielded an enhanced ECL signal, allowing rapid detection of taurine at 5.5â¯×â¯10-6â¯molâ¯L-1 detection limit. The ECL signal is stable and reproducible. The sensor has been applied to the determination of taurine in a commercial taurine supplement.
RESUMEN
Electrochemical or faradaic impedance spectroscopy (EIS) using the ferri/ferrocyanide couple as a redox probe at gold working electrodes was evaluated with respect to its ability to monitor consecutive surface modification steps. As a model reaction, the reversible hybridization and dehybridization of DNA was studied. Thiol-modified single stranded DNA (ssDNA, 20 bases, capture probe) was chemisorbed to a gold electrode and treated with a solution of short thiols to release nonspecifically adsorbed DNA before hybridization with complementary ssDNA (20 bases, target) was carried out. Reversible dehybridization was achieved by intense rinsing with pure water. The experimental procedures were optimized by kinetic surface plasmon resonance (SPR) and quartz crystal microbalance with dissipation (QCM-D) measurements to maximize the increase in reflectivity or decrease in frequency upon hybridization before hybridization/dehybridization was also monitored by EIS. In contrast to SPR and QCM-D, repeatable EIS measurements were not possible at first. Combined SPR/EIS and QCM-D/EIS measurements revealed that during EIS the gold surface is seriously damaged due to the presence of CN(-) ions, which are released from the ferri/ferrocyanide redox probe. Even at optimized experimental conditions, etching the gold electrodes could not be completely suppressed and the repeatability of the EIS measurements was limited. In three out of four experimental runs, only two hybridization/dehybridization steps could be monitored reversibly by EIS. Thereafter etching the gold electrode significantly contributed to the EIS spectra whereas the QCM-D response was still repeatable. Hence great care has to be taken when this technique is used to monitor surface modification at gold electrodes.
Asunto(s)
ADN de Cadena Simple/análisis , Espectroscopía Dieléctrica , Ferricianuros/química , Ferrocianuros/química , Oro/química , Electrodos , Oxidación-Reducción , Tecnicas de Microbalanza del Cristal de Cuarzo , Compuestos de Sulfhidrilo/química , Resonancia por Plasmón de Superficie , Propiedades de SuperficieRESUMEN
For the first time, gold nanoparticle-based electrodes have been used as platforms for efficient immobilization of the [NiFe] hydrogenase from the hyperthermophilic bacterium Aquifex aeolicus. AuNPs were characterized by electronic microscopy, dynamic light scattering and UV-Vis spectroscopy. Two sizes around 20.0±5.3 nm and 37.2±4.3 nm nm were synthesized. After thiol-based functionalization, the AuNPs were proved to allow direct H2 oxidation over a large range of temperatures. A high current density up to 1.85±0.15 mA·cm(-2) was reached at the smallest AuNPs, which is 170 times higher than the one recorded at the bare gold electrode. The catalytic current was especially studied as a function of the AuNP size and amount, and procedure for deposition. A synergetic effect between the AuNP porous deposit and the increase surface area was shown. Compared to previously used nanomaterials such as carbon nanofibers, the covalent grafting of the enzyme on the thiol-modified gold nanoparticles was shown to enhance the stability of the hydrogenase. This bioanode was finally coupled to a biocathode where BOD from Myrothecium verrucaria was immobilized on AuNP-based film. The performance of the so-mounted H2/O2 biofuel cell was evaluated, and a power density of 0.25 mW·cm(-2) was recorded.
Asunto(s)
Aquifoliaceae/enzimología , Fuentes de Energía Bioeléctrica , Oro/química , Hidrógeno/química , Hidrogenasas/metabolismo , Nanopartículas del Metal/química , Oxígeno/química , Electroquímica , Electrodos , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Hidrogenasas/química , Hypocreales/enzimología , Oxidación-Reducción , Oxidorreductasas actuantes sobre Donantes de Grupo CH-CH/química , Oxidorreductasas actuantes sobre Donantes de Grupo CH-CH/metabolismoRESUMEN
In this paper the multiple (re)programming of protein-DNA nanostructures comprising generation, deletion, and reprogramming on the same flavin-DNA-modified surface is introduced. This work is based on a systematic study of the binding affinity of the multi-ligand-binding flavoprotein dodecin on flavin-terminated DNA monolayers by surface plasmon resonance and quartz crystal microbalance with dissipation (QCM-D) measurements, surface plasmon fluorescence spectroscopy (SPFS), and dynamic AFM force spectroscopy. Depending on the flavin surface coverage, a single apododecin is captured by one or more surface-immobilized flavins. The corresponding complex binding and unbinding rate constants kon(QCM) = 7.7 × 10(3) M(-1)·s(-1) and koff(QCM) = 4.5 × 10(-3) s(-1) (Kd(QCM) = 580 nM) were determined by QCM and were found to be in agreement with values for koff determined by SPFS and force spectroscopy. Even though a single apododecin-flavin bond is relatively weak, stable dodecin monolayers were formed on flavin-DNA-modified surfaces at high flavin surface coverage due to multivalent interactions between apododecin bearing six binding pockets and the surface-bound flavin-DNA ligands. If bi- or multivalent flavin ligands are adsorbed on dodecin monolayers, stable sandwich-type surface-DNA-flavin-apododecin-flavin ligand arrays are obtained. Nevertheless, the apododecin flavin complex is easily and quantitatively disassembled by flavin reduction. Binding and release of apododecin are reversible processes, which can be carried out alternatingly several times to release one type of ligand by an external redox trigger and subsequently replace it with a different ligand. Hence the versatile concept of reprogrammable functional biointerfaces with the multi-ligand-binding flavoprotein dodecin is demonstrated.
Asunto(s)
Biotecnología/métodos , Flavoproteínas/metabolismo , Nanotecnología/métodos , Adsorción , Apoproteínas/química , Apoproteínas/metabolismo , ADN/química , ADN/metabolismo , Flavinas/química , Flavinas/metabolismo , Flavoproteínas/química , Oro/química , Proteínas Inmovilizadas/química , Proteínas Inmovilizadas/metabolismo , Cinética , Ligandos , Unión Proteica , Propiedades de SuperficieRESUMEN
Here for the first time, we detail self-contained (wireless and self-powered) biodevices with wireless signal transmission. Specifically, we demonstrate the operation of self-sustained carbohydrate and oxygen sensitive biodevices, consisting of a wireless electronic unit, radio transmitter and separate sensing bioelectrodes, supplied with electrical energy from a combined multi-enzyme fuel cell generating sufficient current at required voltage to power the electronics. A carbohydrate/oxygen enzymatic fuel cell was assembled by comparing the performance of a range of different bioelectrodes followed by selection of the most suitable, stable combination. Carbohydrates (viz. lactose for the demonstration) and oxygen were also chosen as bioanalytes, being important biomarkers, to demonstrate the operation of the self-contained biosensing device, employing enzyme-modified bioelectrodes to enable the actual sensing. A wireless electronic unit, consisting of a micropotentiostat, an energy harvesting module (voltage amplifier together with a capacitor), and a radio microchip, were designed to enable the biofuel cell to be used as a power supply for managing the sensing devices and for wireless data transmission. The electronic system used required current and voltages greater than 44 µA and 0.57 V, respectively to operate; which the biofuel cell was capable of providing, when placed in a carbohydrate and oxygen containing buffer. In addition, a USB based receiver and computer software were employed for proof-of concept tests of the developed biodevices. Operation of bench-top prototypes was demonstrated in buffers containing different concentrations of the analytes, showcasing that the variation in response of both carbohydrate and oxygen biosensors could be monitored wirelessly in real-time as analyte concentrations in buffers were changed, using only an enzymatic fuel cell as a power supply.
Asunto(s)
Fuentes de Energía Bioeléctrica , Técnicas Biosensibles/instrumentación , Carbohidratos , Oxígeno , Ondas de RadioRESUMEN
Gold disk electrodes modified with gold nanoparticles have been used as a scaffold for the covalent immobilization of bilirubin oxidase. The nanostructured bioelectrodes were tested as mediator-less biosensors for oxygen in a buffer that mimics the content and the composition of human physiological fluids. Chronoamperometry measurements showed a detection limit towards oxygen of 6 ± 1 µM with a linear range of 6-300 µM, i.e. exceeding usual physiological ranges of oxygen in human tissues and fluids. The biosensor presented is the first ever-reported oxygen amperometric biosensor based on direct electron transfer of bilirubin oxidase.
Asunto(s)
Técnicas Biosensibles , Proteínas Inmovilizadas/química , Oxidorreductasas actuantes sobre Donantes de Grupo CH-CH/química , Oxígeno/aislamiento & purificación , Electrodos , Oro/química , Humanos , Nanoestructuras/química , Oxígeno/químicaRESUMEN
Direct electron transfer (DET) reactions between redox enzymes and electrodes can be maximized by oriented immobilization of the enzyme molecules onto an electroactive surface modified with functionalized gold nanoparticles (AuNPs). Here, we present such strategy for obtaining a DET-based laccase (Lc) cathode for O(2) electroreduction at low overpotentials. The stable nanostructured enzymatic electrode is based on the step-by-step covalent attachment of AuNPs and Lc molecules to porous graphite electrodes using the diazonium salt reduction strategy. Oriented immobilization of the enzyme molecules on adequately functionalized AuNPs allows establishing very fast DET with the electrode via their Cu T1 site. The measured electrocatalytic waves of O(2) reduction can be deconvoluted into two contributions. The one at lower overpotentials corresponds to immobilized Lc molecules that are efficiently wired by the AuNPs with a heterogeneous electron transfer rate constant k(0) â« 400 s(-1).
Asunto(s)
Enzimas Inmovilizadas/química , Oro/química , Lacasa/química , Nanopartículas del Metal/química , Electrodos , Transporte de Electrón , Electrones , Enzimas Inmovilizadas/metabolismo , Grafito/química , Grafito/metabolismo , Lacasa/metabolismo , Oxidación-Reducción , Oxígeno/química , Oxígeno/metabolismo , Trametes/enzimologíaRESUMEN
The interaction of redox enzymes with electrodes is of great interest for studying the catalytic mechanisms of redox enzymes and for bioelectronic applications. Efficient electron transport between the biocatalysts and the electrodes has achieved more success with soluble enzymes than with membrane enzymes because of the higher structural complexity and instability of the latter proteins. In this work, we report a strategy for immobilizing a membrane-bound enzyme onto gold electrodes with a controlled orientation in its fully active conformation. The immobilized redox enzyme is the Ni-Fe-Se hydrogenase from Desulfovibrio vulgaris Hildenborough, which catalyzes H(2)-oxidation reversibly and is associated with the cytoplasmic membrane by a lipidic tail. Gold surfaces modified with this enzyme and phospholipids have been studied by atomic force microscopy (AFM) and electrochemical methods. The combined study indicates that by a two-step immobilization procedure the hydrogenase can be inserted via its lipidic tail onto a phospholipidic bilayer formed over the gold surface, allowing only mediated electron transfer between the enzyme and electrode. However, a one-step immobilization procedure favors the formation of a hydrogenase monolayer over the gold surface with its lipidic tail inserted into a phospholipid bilayer formed on top of the hydrogenase molecules. This latter method has allowed for the first time efficient electron transfer between a membrane-bound enzyme in its native conformation and an electrode.
Asunto(s)
Membrana Celular/metabolismo , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Hidrogenasas/química , Hidrogenasas/metabolismo , Compuestos de Anilina/química , Biocatálisis , Desulfovibrio vulgaris/enzimología , Electrodos , Transporte de Electrón , Oro/química , Membrana Dobles de Lípidos/química , Membrana Dobles de Lípidos/metabolismo , Fosfolípidos/química , Fosfolípidos/metabolismo , Compuestos de Sulfhidrilo , Propiedades de SuperficieRESUMEN
The study of Ni-Fe-Se hydrogenases is interesting from the basic research point of view because their active site is a clear example of how nature regulates the catalytic function of an enzyme by the change of a single residue, in this case a cysteine, which is replaced by a selenocysteine. Most hydrogenases are inhibited by CO and O(2). In this work we studied these inhibition processes for the Ni-Fe-Se hydrogenase from Desulfovibrio vulgaris Hildenborough by combining catalytic activity measurements, followed by mass spectrometry or chronoamperometry, with Fourier transform IR spectroscopy experiments. The results show that the CO inhibitor binds to Ni in both conformations of the active site of this hydrogenase in a way similar to that in standard Ni-Fe hydrogenases, although in one of the CO-inhibited conformations the active site of the Ni-Fe-Se hydrogenase is more protected against the attack by O(2). The inhibition of the Ni-Fe-Se hydrogenase activity by O(2) could be explained by oxidation of the terminal cysteine ligand of the active-site Ni, instead of the direct attack of O(2) on the bridging site between Ni and Fe.
Asunto(s)
Monóxido de Carbono/química , Desulfovibrio vulgaris/enzimología , Hidrogenasas/química , Oxígeno/química , Biocatálisis , Monóxido de Carbono/farmacología , Dominio Catalítico , Electroquímica , Hidrogenasas/antagonistas & inhibidores , Hidrogenasas/metabolismo , Espectrometría de Masas , Oxidación-Reducción , Oxígeno/farmacología , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
For the first time a complete characterization by infrared spectroscopy of a Ni-Fe-Se hydrogenase in its different redox states is reported. The Ni-Fe-Se hydrogenase was isolated from Desulfovibrio vulgaris Hildenborough. Two different electron paramagnetic resonance silent and air-stable redox states that are not in equilibrium were detected. Upon reduction of these states the catalytically active states Ni-R and Ni-C appear immediately. These states are in redox equilibrium and their formal redox potential has been measured. Putative structural differences between the redox states of the active site of the Ni-Fe-Se hydrogenase are discussed.