Tungsten Oxide Dispersed on Silica as Robust and Readily Available Oxo/Imido Heterometathesis Catalyst.

Continuing our investigation of catalytic oxo/imido heterometathesis as novel water-free method for C=N bond construction, we report here the application of classical transition metal oxides dispersed on silica (MOx/SiO2, M=V, Mo, W) as cheap, robust and readily available alternative to the catalysts prepared via Surface Organometallic Chemistry (SOMC). The oxide materials demonstrated activity in heterometathetical imidation of ketones, WO3/SiO2 being the most efficient. We also describe a new well-defined supported W imido complex (≡SiO)W(=NMes)2(Me2Pyr) (Mes=2,4,6-Me3C6H2, Me2Pyr=2,5-dimethylpyrrolyl) and characterize it with SOMC protocols, which allowed us to identify the position of W on the oxo/imido heterometathesis activity scale (Mo

A Family of Hexacopper Phenylsilsesquioxane/Acetate Complexes: Synthesis, Solvent-Controlled Cage Structures, and Catalytic Activity.

Convenient self-assembly synthesis of copper(II) complexes via double (phenylsilsesquioxane and acetate) ligation allows to isolate a family of impressive sandwich-like cage compounds. An intriguing feature of these complexes is the difference in the structure of a pair of silsesquioxane ligands despite identical (Cu6) nuclearity and number (four) of acetate fragments. Formation of particular combination of silsesquioxane ligands (cyclic/cyclic vs condensed/condensed vs cyclic/condensed) was found to be dependent on the synthesis/crystallization media. A combination of Si4-cyclic and Si6-condensed silsesquioxane ligands is a brand new feature of cage metallasilsesquioxanes. A representative Cu6-complex (4) (with cyclic silsesquioxanes) exhibited high catalytic activity in the oxidation of alkanes and alcohols with peroxides. Maximum yield of the products of cyclohexane oxidation attained 30 %. The compound 4 was also tested as catalyst in the Baeyer-Villiger oxidation of cyclohexanone by m-chloroperoxybenzoic acid: maximum yields of 88 % and 100 % of ϵ-caprolactone were achieved upon conventional heating at 50 °C for 4 h and MW irradiation at 70 or 80 °C during 30 min, respectively. It was also possible to obtain the lactone (up to 16 % yield) directly from the cyclohexane via a tandem oxidation/Baeyer-Villiger oxidation reaction using the same oxidant.

Readily available Ti-based in situ catalytic system for oxo/imido heterometathesis.

We investigate Ti(NEt2)4 supported on silica dehydroxylated at 700 °C as an easily accessible pre-catalyst for oxo/imido heterometathesis reactions. Being activated with TolNH2, the supported Ti amide (SiO)Ti(NEt2)3 (1) demonstrates catalytic activity in the imidation of ketones with N-sulfinylamines comparable with the most active previously described well-defined imido catalyst (SiO)Ti(NtBu)(Me2Pyr)(py)2 (2) (Me2Pyr = 2,5-dimethylpyrrolyl), which implies the in situ formation of surface imido species in this system. The materials obtained via treatment of 1 with anilines (TolNH2 (1a) and p-MeOC6H415NH2 (1b)) were studied with IR, EA and 1H, 13C, 15N and 2D solid-state NMR, although the proposed imido intermediate has not been detected, pointing towards tris-amides (SiO)Ti(NHC6H4X)3 (X = Me, OMe) being the major surface species in the isolated materials 1a and 1b. The system 1/TolNH2 was tested in a range of imidation reactions and demonstrated excellent performance for express high-yielding preparation of ketimines, formamidines, lactone imidates and sulfurdiimines, making it a convenient alternative to the well-defined supported Ti imido catalysts.

Unsymmetrical Pd(II) Pincer Complexes with Benzothiazole and Thiocarbamate Flanking Units: Expedient Solvent-Free Synthesis and Anticancer Potential.

Driven by the growing threat of cancer, many research efforts are directed at developing new chemotherapeutic agents, where the central role is played by transition metal complexes. The proper ligand design serves as a key factor to unlock the anticancer potential of a particular metal center. Following a recent trend, we have prepared unsymmetrical pincer ligands that combine benzothiazole and thiocarbamate donor groups. These compounds are shown to readily undergo direct cyclopalladation, affording the target S,C,N-type Pd(II) pincer complexes both in solution and in the absence of a solvent. The solid-phase strategy provided the complexes in an efficient and ecologically friendly manner. The resulting palladacycles are fully characterized using nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy and, in one case, by single-crystal X-ray diffraction (XRD). The solvent-free reactions are additionally analyzed by powder XRD. The pincer complexes exhibit remarkable cytotoxicity against several solid and blood cancer cell lines, including human colorectal carcinoma (HCT116), breast cancer (MCF7), prostate adenocarcinoma (PC3), chronic myelogenous leukemia (K562), multiple plasmacytoma (AMO1), and acute lymphoblastic leukemia (H9), with the dimethylamino-substituted derivative being particularly effective. The latter also induced an appreciable level of apoptosis in both parental and doxorubicin-resistant cells K562 and K562/iS9, vindicating the high anticancer potential of this type of palladacycles.

A Family of Cagelike Mn-Silsesquioxane/Bathophenanthroline Complexes: Synthesis, Structure, and Catalytic and Antifungal Activity.

This study reports a novel family of cage manganesesilsesquioxanes prepared via complexation with bathophenanthroline (4,7-diphenyl-1,10-phenanthroline). The resulting Mn4-, Mn6Li2-, and Mn4Na-compounds exhibit several unprecedented cage metallasilsesquioxane structural features, including intriguing self-assembly of silsesquioxane ligands. Complexes were tested in vitro for fungicidal activity against seven classes of phytopathogenic fungi. The representative Mn4Na-complex acts as a catalyst in the cycloaddition of CO2 to epoxides under solvent-free conditions to form cyclic carbonates in good yields.

Modulation of the Cytotoxic Properties of Pd(II) Complexes Based on Functionalized Carboxamides Featuring Labile Phosphoryl Coordination Sites.

Platinum-based drugs are commonly recognized as a keystone in modern cancer chemotherapy. However, intrinsic and acquired resistance as well as serious side effects often caused by the traditional Pt(II) anticancer agents prompt a continuous search for more selective and efficient alternatives. Today, significant attention is paid to the compounds of other transition metals, in particular those of palladium. Recently, our research group has suggested functionalized carboxamides as a useful platform for the creation of cytotoxic Pd(II) pincer complexes. In this work, a robust picolinyl- or quinoline-carboxamide core was combined with a phosphoryl ancillary donor group to achieve hemilabile coordination capable of providing the required level of thermodynamic stability and kinetic lability of the ensuing Pd(II) complexes. Several cyclopalladated derivatives featuring either a bi- or tridentate pincer-type coordination mode of the deprotonated phosphoryl-functionalized amides were selectively synthesized and fully characterized using IR and NMR spectroscopy as well as X-ray crystallography. The preliminary evaluation of the anticancer potential of the resulting palladocycles revealed a strong dependence of their cytotoxic properties on the binding mode of the deprotonated amide ligands and demonstrated certain advantages of the pincer-type ligation.

Hybrid Silsesquioxane/Benzoate Cu7-Complexes: Synthesis, Unique Cage Structure, and Catalytic Activity.

A series of phenylsilsesquioxane-benzoate heptacopper complexes 1-3 were synthesized and characterized by X-ray crystallography. Two parallel routes of toluene spontaneous oxidation (into benzyl alcohol and benzoate) assisted the formation of the cagelike structure 1. A unique multi-ligation of copper ions (from (i) silsesquioxane, (ii) benzoate, (iii) benzyl alcohol, (iv) pyridine, (v) dimethyl-formamide and (vi) water ligands) was found in 1. Directed self-assembly using benzoic acid as a reactant afforded complexes 2-3 with the same main structural features as for 1, namely heptanuclear core coordinated by (i) two distorted pentameric cyclic silsesquioxane and (ii) four benzoate ligands, but featuring other solvate surroundings. Complex 3 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with hydrogen peroxide and tert-butyl hydroperoxide, respectively, at 50 °C in acetonitrile. The maximum yield of cyclohexane oxidation products as high as 32% was attained. The oxidation reaction results in a mixture of cyclohexyl hydroperoxide, cyclohexanol, and cyclohexanone. Upon the addition of triphenylphosphine, the cyclohexyl hydroperoxide is completely converted to cyclohexanol. The specific regio- and chemoselectivity in the oxidation of n-heptane and methylcyclohexane, respectively, indicate the involvement of of hydroxyl radicals. Complex 3 exhibits a high activity in the oxidation of alcohols.

Acetone Factor in the Design of Cu4-, Cu6-, and Cu9-Based Cage Coppersilsesquioxanes: Synthesis, Structural Features, and Catalytic Functionalization of Alkanes.

The present study describes a new feature in the self-assembly of cagelike copperphenylsilsesquioxanes: the strong influence of acetone solvates on cage structure formation. By this simple approach, a series of novel tetra-, hexa-, or nonacoppersilsesquioxanes were isolated and characterized. In addition, several new complexes of Cu4 or Cu6 nuclearity bearing additional nitrogen-based ligands (ethylenediamine, 2,2'-bipyridine, phenanthroline, bathophenanthroline, or neocuproine) were produced. Single-crystal X-ray diffraction studies established molecular architectures of all of the synthesized products. Several coppersilsesquioxanes represent a novel feature of cagelike metallasilsesquioxane (CLMS) in terms of molecular topology. A Cu4-silsesquioxane complex with ethylenediamine (En) ligands was isolated via the unprecedented self-assembly of a partly condensed framework of silsesquioxane ligands, followed by the formation of a sandwich-like cage. Two prismatic Cu6 complexes represent the different conformers─regular and elliptical hexagonal prisms, "cylinders", determined by the different orientations of the coordinated acetone ligands ("shape-switch effect"). A heterometallic Cu4Na4-sandwich-like derivative represents the first example of a metallasilsesquioxane complex with diacetone alcohol ligands formed in situ due to acetone condensation reaction. As a selected example, the compound [(Ph6Si6O11)2Cu4En2]·(acetone)2 was explored in homogeneous oxidation catalysis. It catalyzes the oxidation of alkanes to alkyl hydroperoxides with hydrogen peroxide and the oxidation of alcohols to ketones with tert-butyl hydroperoxide. Radical species take part in the oxidation of alkanes. Besides, [(Ph6Si6O11)2Cu4En2]·(acetone)2 catalyzes the mild oxidative functionalization of gaseous alkanes (ethane, propane, n-butane, and i-butane). Two different model reactions were investigated: (1) the oxidation of gaseous alkanes with hydrogen peroxide to give a mixture of oxygenates (alcohols, ketones, or aldehydes) and (2) the carboxylation of Cn gaseous alkanes with carbon monoxide, water, and potassium peroxodisulfate to give Cn+1 carboxylic acids (main products), along with the corresponding Cn oxygenates. For these reactions, the effects of acid promoter, reaction time, and substrate scope were explored. As expected for free-radical-type reactions, the alkane reactivity follows the trend C2H6 < C3H8 < n-C4H10 < i-C4H10. The highest total product yields were observed in the carboxylation of i-butane (up to 61% based on i-C4H10). The product yields and catalyst turnover numbers (TONs) are remarkable, given an inertness of gaseous alkanes and very mild reaction conditions applied (low pressures, 50-60 °C temperatures).

Versatile Reactivity of Half-Sandwich Rhodium(III) Iminophosphonamide Complexes.

Novel 18e̅ and 16e̅ pentamethylcyclopentadienyl rhodium(III) complexes [(η5-C5Me5)RhX(NPN)] (1a,b, X = Cl; 2a-c, X = PF6, BAr4F) with chelating zwitterionic iminophosphonamide (NPN) ligands (Ph2P(NR)(NR'); a, R = R' = p-Tol; b, R = p-Tol, R' = Me; c, R = R' = Me) were synthesized and characterized by single-crystal X-ray diffraction. In the 16e̅ complexes 2, the rhodium (Rh) atom is efficiently stabilized by π-donation of unshared N electrons, thus hampering coordination of the external ligands and rendering the 18e̅ complexes labile. Due to low coordination enthalpy, the cationic 18e̅ monocarbonyl and pyridine adducts 2a·L are stable only at low temperatures. At room temperature, 2·CO adducts readily give stable carbonyl-carbamoyl complexes [(η5-C5Me5)Rh(CO){(CO(NR')Ph2P(NR)}]+ (4) formed as a result of CO insertion into the Rh-N bond, thus showing high nucleophilicity of the N atoms in 18e̅ complexes. High basicity of the Na+NPN- precursors caused side deprotonation of the η5-C5Me5 ligand during the synthesis of 1 that yields unstable fulvene Rh(I) complexes [(η4-C5Me4CH2)Rh{Ph2P(NR)(NR')2}] (3a,b). Complex 3a undergoes a facile reaction with isoprene to yield an unusual [(η5:η1-C5Me4(CH2)C(Me)═CHCH2)Rh(NPN)] complex─the first example of intermolecular 1,4-metallacycloaddition of diene to the Rh-fulvene complex.

Pincer-dipeptide and pseudodipeptide conjugates: Synthesis and bioactivity studies.

Following a recent trend on the application of different pincer scaffolds for the development of new metal-based antitumor agents, in this work, dipeptides and dipeptide surrogates based on picolinyl- and 4-chloropicolinylamides with S-donor amino acid residues (cysteine, homocysteine, or methionine) bearing glycinate, alaninate, or phosphonate moieties either at the C-terminus or in the S-donor side arm have been designed as nonclassical pincer ligands with central amide units and shown to smoothly undergo site-selective direct cyclopalladation under mild conditions, affording the target Pd(II) pincer complexes in good to high yields. The realization of S,N,N-coordination through the sulfur atom of the thioether group and nitrogen atoms of the pyridine and deprotonated amide units was unambiguously confirmed using different NMR techniques (1H, 13C, 31P, and 2D NMR methods, including 1H15N HMBC) and IR spectroscopy; the structure of one representative was elucidated by X-ray crystallography. The resulting pincer-(pseudo)dipeptide conjugates were screened for cytotoxicity against several cancer cell lines and noncancerous human embryonic kidney cells and at least some of them provided an appreciable level of activity comparable to that of cisplatin. The S-modified homocysteine-based derivatives exhibited also significant antiproliferative effects against doxorubicin-resistant transformed breast cells HBL100/Dox, implying the possibility of overcoming drug resistance. The complexes can induced apoptosis but did not affect mitochondria. The comparative DNA/protein binding studies of one of the most active pincer-(pseudo)dipeptide conjugates with the monoamino acid-based prototype revealed certain advantages of the former and gave further insights into the potential of this type of palladium-based antitumor agents.

Palladium(II) Pincer Complexes of Functionalized Amides with S-Modified Cysteine and Homocysteine Residues: Cytotoxic Activity and Different Aspects of Their Biological Effect on Living Cells.

In the search for potential new metal-based antitumor agents, two series of nonclassical palladium(II) pincer complexes based on functionalized amides with S-modified cysteine and homocysteine residues have been prepared and fully characterized by 1D and 2D NMR (1H, 13C, COSY, HMQC or HSQC, 1H-13C, and 1H-15N HMBC) and IR spectroscopy and, in some cases, X-ray diffraction. Most of the resulting complexes exhibit a high level of cytotoxic activity against several human cancer cell lines, including colon (HCT116), breast (MCF7), and prostate (PC3) cancers. Some of the compounds under consideration are also efficient in both native and doxorubicin-resistant transformed breast cells HBL100, suggesting the prospects for the creation of therapeutic agents based on the related compounds that would be able to overcome drug resistance. An analysis of different aspects of their biological effects on living cells has revealed a remarkable ability of the S-modified derivatives to induce cell apoptosis and efficient cellular uptake of their fluorescein-conjugated counterpart, confirming the high anticancer potential of Pd(II) pincer complexes derived from functionalized amides with S-donor amino acid pendant arms.

Bifunctional activation of amine-boranes by the W/Pd bimetallic analogs of "frustrated Lewis pairs".

The reaction between basic [(PCP)Pd(H)] (PCP = 2,6-(CH2P(t-C4H9)2)2C6H4) and acidic [LWH(CO)3] (L = Cp (1a), Tp (1b); Cp = η5-cyclopentadienyl, Tp = κ3-hydridotris(pyrazolyl)borate) leads to the formation of bimolecular complexes [LW(CO)2(µ-CO)⋯Pd(PCP)] (4a, 4b), which catalyze amine-borane (Me2NHBH3, t BuNH2BH3) dehydrogenation. The combination of variable-temperature (1H, 31P{1H}, 11B NMR and IR) spectroscopies and computational (ωB97XD/def2-TZVP) studies reveal the formation of an η1-borane complex [(PCP)Pd(Me2NHBH3)]+[LW(CO3)]- (5) in the first step, where a BH bond strongly binds palladium and an amine group is hydrogen-bonded to tungsten. The subsequent intracomplex proton transfer is the rate-determining step, followed by an almost barrierless hydride transfer. Bimetallic species 4 are easily regenerated through hydrogen evolution in the reaction between two hydrides.

Synthesis, structural properties and reactivity of ruthenocene-based pincer Pd(ii) tetrahydroborate.

Two novel ruthenocene-based pincer palladium tetrahydroborates were characterized by XRD, NMR and FTIR. The alcoholysis of Pd(ii) tetrahydroborate LPd(BH4) (L = κ3-[{2,5-(tBu2PCH2)2C5H2}Ru(C5H5)]) yields the dinuclear cationic Pd(ii) tetrahydroborate with the bridging BH4- ligand [(LPd)2(µ,η1,2:η1,2-BH4)]+. The bifurcate dihydrogen-bonded complexes are the active intermediates of the first proton transfer in the step-wise alcoholysis of LPd(BH4), yielding eventually [(LPd)2(µ,η1,2:η1,2-BH4)]+. According to the X-ray and DFT/M06 geometry analysis, the BH4- ligand in both palladium tetrahydroborates has a mixed coordination mode η1,2. The possibility of BH3-group abstraction from LPd(BH4) by an excess of organic base (THF, Py) with the formation of hydride LPdIIH is shown. This Pd(ii) hydride is a very reactive compound able to rapidly capture CO2 (ca. 15 min) converting into the formate complex LPdII(η1-OC(O)H). The hydrolysis of LPdH with subsequent CO2 insertion yields a hydrocarbonate complex LPdII(η1-OC(O)OH). The hydrocarbonate complex forms hydrogen-bonded dimers in the crystal due to hydrogen bonds between the OC(O)OH fragments.

Highly Cytotoxic Palladium(II) Pincer Complexes Based on Picolinylamides Functionalized with Amino Acids Bearing Ancillary S-Donor Groups.

The reactions of picolinyl and 4-chloropicolinyl chlorides with methyl esters of S-methyl-l-cysteine, l- and d-methionine, and l-histidine afforded a series of functionalized carboxamides, which readily formed pincer-type complexes upon interaction with PdCl2(NCPh)2 in solution under mild conditions. The direct cyclopalladation of the ligands derived was also accomplished in the solid phase, in particular, mechanochemically, although it was complicated by the partial deactivation of the starting amides. The resulting complexes with 5,5- and 5,6-membered fused metallocycles were fully characterized by IR and NMR spectroscopy, including variable-temperature and 2D-NMR studies. In the case of some cysteine- and methionine-based derivatives, the realization of κ3-N,N,S-coordination was supported by X-ray diffraction. The cytotoxic effects of these complexes were examined on HCT116, MCF7, and PC3 human cancer cell lines as well as HEK293 as a representative of normal cells. The comparative studies allowed us to determine that the presence of the sulfide ancillary donor group is crucial for cytotoxic activity of this type of Pd(II) complexes. The main structure-activity relationships and the most promising palladocycles were outlined. The additional studies by gel electrophoresis revealed that 4-chloropicolinyl derivatives, despite the nature of an amino acid, can bind with DNA and inhibit topoisomerase I activity.

Dihydrogen bonding in complex (PP3)RuH(η(1)-BH4) featuring two proton-accepting hydride sites: experimental and theoretical studies.

Combining variable-temperature infrared and NMR spectroscopic studies with quantum-chemical calculations (density functional theory (DFT) and natural bond orbital) allowed us to address the problem of competition between MH (M = transition metal) and BH hydrogens as proton-accepting sites in dihydrogen bond (DHB) and to unravel the mechanism of proton transfer to complex (PP3)RuH(η(1)-BH4) (1, PP3 = κ(4)-P(CH2CH2PPh2)3). Interaction of complex 1 with CH3OH, fluorinated alcohols of variable acid strength [CH2FCH2OH, CF3CH2OH, (CF3)2CHOH (HFIP), (CF3)3COH], and CF3COOH leads to the medium-strength DHB complexes involving BH bonds (3-5 kcal/mol), whereas DHB complexes with RuH were not observed experimentally. The two proton-transfer pathways were considered in DFT/M06 calculations. The first one goes via more favorable bifurcate complexes to BHterm and high activation barriers (38.2 and 28.4 kcal/mol in case of HFIP) and leads directly to the thermodynamic product [(PP3)RuHeq(H2)](+)[OR](-). The second pathway starts from the less-favorable complex with RuH ligand but shows a lower activation barrier (23.5 kcal/mol for HFIP) and eventually leads to the final product via the isomerization of intermediate [(PP3)RuHax(H2)](+)[OR](-). The B-Hbr bond breaking is the common key step of all pathways investigated.

Dimerization mechanism of bis(triphenylphosphine)copper(I) tetrahydroborate: proton transfer via a dihydrogen bond.

The mechanism of transition-metal tetrahydroborate dimerization was established for the first time on the example of (Ph(3)P)(2)Cu(η(2)-BH(4)) interaction with different proton donors [MeOH, CH(2)FCH(2)OH, CF(3)CH(2)OH, (CF(3))(2)CHOH, (CF(3))(3)CHOH, p-NO(2)C(6)H(4)OH, p-NO(2)C(6)H(4)N═NC(6)H(4)OH, p-NO(2)C(6)H(4)NH(2)] using the combination of experimental (IR, 190-300 K) and quantum-chemical (DFT/M06) methods. The formation of dihydrogen-bonded complexes as the first reaction step was established experimentally. Their structural, electronic, energetic, and spectroscopic features were thoroughly analyzed by means of quantum-chemical calculations. Bifurcate complexes involving both bridging and terminal hydride hydrogen atoms become thermodynamically preferred for strong proton donors. Their formation was found to be a prerequisite for the subsequent proton transfer and dimerization to occur. Reaction kinetics was studied at variable temperature, showing that proton transfer is the rate-determining step. This result is in agreement with the computed potential energy profile of (Ph(3)P)(2)Cu(η(2)-BH(4)) dimerization, yielding [{(Ph(3)P)(2)Cu}(2)(µ,η(4)-BH(4))](+).

Neutral transition metal hydrides as acids in hydrogen bonding and proton transfer: media polarity and specific solvation effects.

Structural, spectroscopic, and electronic features of weak hydrogen-bonded complexes of CpM(CO)(3)H (M = Mo (1a), W (1b)) hydrides with organic bases (phosphine oxides R(3)PO (R = n-C(8)H(17), NMe(2)), amines NMe(3), NEt(3), and pyridine) are determined experimentally (variable temperature IR) and computationally (DFT/M05). The intermediacy of these complexes in reversible proton transfer is shown, and the thermodynamic parameters (DeltaH degrees , DeltaS degrees ) of each reaction step are determined in hexane. Assignment of the product ion pair structure is made with the help of the frequency calculations. The solvent effects were studied experimentally using IR spectroscopy in CH(2)Cl(2), THF, and CH(3)CN and computationally using conductor-like polarizable continuum model (CPCM) calculations. This complementary approach reveals the particular importance of specific solvation for the hydrogen-bond formation step. The strength of the hydrogen bond between hydrides 1 and the model bases is similar to that of the M-H...X hydrogen bond between 1 and THF (X = O) or CH(3)CN (X = N) or between CH(2)Cl(2) and the same bases. The latter competitive weak interactions lower the activities of both the hydrides and the bases in the proton transfer reaction. In this way, these secondary effects shift the proton transfer equilibrium and lead to the counterintuitive hampering of proton transfer upon solvent change from hexane to moderately polar CH(2)Cl(2) or THF.

Mechanistic studies on the interaction of [(kappa3-P,P,P-NP3)IrH3] [NP3 = N(CH2CH2PPh2)3] with HBF4 and fluorinated alcohols by combined NMR, IR, and DFT techniques.

The novel iridium(III) hydride [(kappa(3)-P,P,P-NP(3))IrH(3)] [NP(3) = N(CH(2)CH(2)PPh(2))(3)] was synthesized and characterized by spectroscopic methods and X-ray crystallography. Its reactivity with strong (HBF(4)) and medium-strength [the fluorinated alcohols 1,1,1-trifluoroethanol (TFE) and 1,1,1,3,3,3-hexafluoroisopropanol (HFIP)] proton donors was investigated through low-temperature IR and multinuclear NMR spectroscopy. In the case of the weak acid TFE, the only species observed in the 190-298 K temperature range was the dihydrogen-bonded adduct between the hydride and the alcohol, while with the stronger acid HBF(4), the proton transfer was complete, giving rise to a new intermediate [(kappa(3)-P,P,P-NP(3))IrH(4)](+). With a medium-strength acid like HFIP, two different sets of signals for the intermediate species were observed besides dihydrogen bond formation. In all cases, the final reaction product at ambient temperature was found to be the stable dihydride [(kappa(4)-NP(3))IrH(2)](+), after slow molecular dihydrogen release. The nature of the short-living species was investigated with the help of density functional theory calculations at the M05-2X//6-31++G(df,pd) level of theory.

Intermolecular hydrogen bonding between neutral transition metal hydrides (eta(5)-C5H5)M(CO)3H (M = Mo, W) and bases.

The interaction of CpM(CO)3H (M = Mo, W) hydrides as proton donors with different bases (B = pyridine, (n-Oc)3PO, ((CH3)2N)3PO, H3BNEt3) was studied by variable temperature IR spectroscopy and theoretically by DFT/B3LYP calculations. The data obtained show for the first time the formation of intermolecular hydrogen bonds between the neutral transition metal hydrides and bases in solutions of low polarity. These M-H...B hydrogen bonds are shown to precede the hydrides' deprotonation.

Low-temperature IR and NMR studies of the interaction of group 8 metal dihydrides with alcohols.

The reactions of the octahedral dihydrido complexes [MH(2)(PP(3))] [M=Fe, Ru, Os; PP(3)=P(CH(2)CH(2)PPh(2))(3)] with a variety of weak ROH acids have been studied by IR and NMR methods in either CH(2)Cl(2) or THF in the temperature range from 190 to 290 K. This study has allowed the determination of the spectral and thermodynamic properties associated with the formation of dihydrogen bonds (DHB) between the terminal hydrides and the OH group. Both the DHB enthalpy values and the hydride basicity factors (E(j)) have been found to increase in the order Fe < Ru < Os. The proton transfer process, leading to the DHB complexes, and eventually to eta(2)-H(2) products, has been found to depend on the acidic strength of the alcohol as well as the nature of the solvent. Low temperature IR and NMR techniques have been used to trace the complete energy profile of the proton transfer process involving the osmium complex [OsH(2)(PP(3))] with trifluoroethanol.