Hierarchical Porous Carbon Supported Co2P2O7 Nanoparticles for Oxygen Evolution and Oxygen Reduction in a Rechargeable Zn-Air Battery.

The oxygen reduction/evolution reaction (ORR/OER) represents a pivotal process in metal-air batteries; however, it is constrained by the limitations of slow kinetics. Nevertheless, the creation of long-lasting and bifunctional catalysts represents a significant challenge. This study presents a series of hierarchical porous carbon-supported cobalt pyrophosphate (Co2P2O7-N/C-T) catalysts, prepared through the pyrolysis of porphyrin-based NTU-70 nanosheets with red phosphorus at varying temperatures. The Co2P2O7-N/C-800 not only demonstrates remarkable OER performance with an overpotential of only 290 mV at a current density of 10 mA cm-2 in 1 M KOH, but also exhibits an excellent ΔE of 0.74 V in 0.1 M KOH, which is lower than that of Pt/C + RuO2 (0.76 V). The utilization of Co2P2O7-N/C-800 as an air cathode in a rechargeable Zn-air battery (ZAB) results in a stable discharge voltage plateau of 1.405 V and a high gravimetric energy density of 801.2 mA h gZn-1. This work presents a promising strategy for the design of efficient bifunctional catalysts and demonstrates the critical importance of the interplay between the active center and the supported hierarchical porous carbon.

Interpenetrated In(III)-MOF with Multiple Recognition Sites for Single-Step Ethylene Purification.

An interpenetrated indium(III) metal-organic framework (MOF), NTUniv-73, with a rarely reported tetrameric indium cluster is developed for streamlining ethylene purification from C2 gases. At 298 K, the adsorption capacities exhibited a complete reversal sequence of C2H6 > C2H2 > C2H4. Grand canonical Monte Carlo simulation indicated that the corners in a octahedral cage facilitated the C2H2/C2H4 separation, while the pocket-like aperture situated between adjacent octahedral cages allows for full contact of C2H6. Breakthrough experiments illustrated that NTUniv-73 could yield pure C2H4 in a single step with a productivity of 0.42 mmol g-1.

Direct Ethylene Purification from a Four-Component Gas Mixture by a Microporous MOF with Aromatic Pore Surface and Carboxylates.

The single-step purification of ethylene (C2H4) from a mixture of carbon dioxide (CO2), acetylene (C2H2), ethylene (C2H4), and ethane (C2H6) was achieved through MOF Compound-1, where the aromatic pore surface and carboxylates selectively recognized C2H6 and CO2, respectively, resulting in a reversal of the adsorption orders for both gases (C2H6 > C2H4 and CO2 > C2H4). Breakthrough testing verified that the C2H4 purification ability could be enhanced 2.6 times after adding impure CO2. Grand Canonical Monte Carlo (GCMC) simulations demonstrate that there are interactions between CO2 and C2H6 molecules as well as between CO2 molecules themselves. These interactions contribute to the enhancement of the C2H4 purification ability upon the addition of CO2 and the increased adsorption of CO2.

Flow Channel with Wrinkles and Calcium Sites in a Ca-MOF for Direct One-Step Ethylene Purification from C2 Gases and MTO Products Separation.

The strategy of flow channel with wrinkles and calcium sites for single-step C2H4 purification from C2 gases and methanol-to-olefins (MTO) products separation was realized in FJI-Y9. The adsorption amounts showed a total reversal order of C3H6 > C2H6 > C2H2 > C2H4 at 298 K. Modeling indicated that the wrinkles and Ca2+ facilitated the full contact of C3H6 and C2H6. Breakthrough experiments illustrated that FJI-Y9 could yield pure C2H4 in a single step with a productivity of 0.78 mmol g-1. In a lone adsorption/desorption cycle for MTO product separation, the productivities of C3H6 and C2H4 were 1.96 and 1.29 mol g-1, standing as the highest recorded values.

Tuning Multiple Counter-Anions in Porous Coordination Polymers with lcy Topology for Acetylene/Ethylene Separation.

The efficient separation of acetylene (C2H2) and ethylene (C2H4) is an important and complex process in the industry. Herein, we report a new family of lcy-topologic coordination frameworks (termed NTU-90 to NTU-92) with Cu3MF6 (M = Si, Ti, and Zr) nodes. These charged frameworks are compensated by different counterbalanced ions (MF62-, BF4-, and Cl-), yielding changes in the size of the window apertures. Among these frameworks, NTU-92-a (activated NTU-92) shows good adsorption selectivity of C2H2/C2H4 and also significant ability in recovering both highly pure C2H4 (99.95%) and C2H2 (99.98%). Our work not only presents a potential alternative for energy-saving purification of C2 hydrocarbons but also provides a new approach for tuning the function of charged porous materials.

Flow Channel with Recognition Corners in a Stable La-MOF for One-Step Ethylene Production.

Single-step ethylene (C2H4) production from acetylene (C2H2), ethylene (C2H4), and ethane (C2H6) mixtures was realized via the strategy of a flow channel with recognition corners in MOF NTUniv-64. Both the uptake amounts and the enthalpy of adsorption (Qst) showed the same order of C2H2 > C2H6 > C2H4. Breakthrough testing also verified the above data and the C2H4 purification ability. Grand Canonical Monte Carlo (GCMC) simulations indicated that uneven corners could precisely detain C2H2 and C2H6, in which the C-H···π interaction distance between C2H2 (2.84 Å) and C2H6 (3.03 Å) and the framework was shorter than that of C2H4 (3.85 Å).

Fine Tuning Metal-Organic Frameworks with Halogen Functional Groups for Ethylene Purification.

One-step C2H4 purification from a mixture of C2H2/C2H4/C2H6 could be achieved by metal-organic framework (MOF) NTUniv-70 with an F-functional group. The selectivities of C2H4/C2H6 and C2H4/C2H2 of NTUnvi-70 based on ideal adsorbed solution theory were at least twice that of the original MOF platform, which was in line with the enthalpy of adsorption (Qst) and breakthrough testing. Grand canonical Monte Carlo simulations indicated that the C-H···F interactions played an important role in enhanced C2H4/C2H6 and C2H4/C2H2 adsorption selectivities.

Creating an Ethane Trap in a Ketone-Decorated MOF for One-Step Ethylene Separation from C2 Hydrocarbons.

One-step C2H4 purification from a mixture of C2H2/C2H4/C2H6 by physical adsorption separation was realized via creating an ethane trap in MOF NTUniv-63 by the utilization of a ketone-decorated semirigid ligand, which has further been verified by the breakthrough experiment, isosteric heats of adsorption (Qst), and Grand Canonical Monte Carlo (GCMC) modeling.

Expanding MOF with Unexpanded Channel via Ketone Decorated Ligand for Ethylene Purification and Stability Enhancement.

The concept of an expanding MOF with unexpanded channel size was realized in MOF NTUniv-61 by the utilization of a ketone-functional-group-decorated semirigid ligand and pillar-layer platform. After this unusual expansion, the preferential C2H6 adsorption was preserved via the unchanged pore size, and the functional group was inserted into the MOF. Interestingly, the C2H2 uptake ability, C2H4 selective adsorption ability, and structural stability were obviously enhanced due to the incorporation of the ketone functional group, which were further verified by isosteric heats of adsorption (Qst), GCMC modeling, and breakthrough experiments.

Fine-Tuning MOFs with Amino Group for One-Step Ethylene Purification from the C2 Hydrocarbon Mixture.

Due to the similar kinetic diameters of C2H2, C2H4, and C2H6, one-step purification of C2H4 from a ternary C2H2/C2H4/C2H6 mixture by adsorption separation is still a challenge. Based on a C2H6-trapping platform and crystal engineering strategy, the N atom and amino group were introduced into NTUniv-58 and NTUniv-59, respectively. Gas adsorption testing of NTUniv-58 showed that both the C2H2 and C2H4 uptake capacities and the C2H2/C2H4 separation ability were boosted compared with the original platform. However, the C2H4 uptake value exceeds the C2H6 adsorption data. For NTUniv-59, the C2H2 uptake at low pressure increased and the C2H4 uptake decreased; thus, the C2H2/C2H4 selectivity was enhanced and the one-step purification of C2H4 from a ternary C2H2/C2H4/C2H6 mixture was realized, which was supported by the enthalpy of adsorption (Qst) and breakthrough testing. Grand canonical monte carlo (GCMC) simulation indicated that the preference for C2H2 over C2H4 originates from multiple hydrogen-bonding interactions between amino groups and C2H2 molecules.